iw: update to 3.6 and add support for configuring antenna gain

SVN-Revision: 33586
master
Felix Fietkau 12 years ago
parent 702bf709d0
commit de6a5279d1
  1. 4
      package/iw/Makefile
  2. 306
      package/iw/patches/001-nl80211_h_sync.patch
  3. 34
      package/iw/patches/100-rx_rate.patch
  4. 13
      package/iw/patches/110-per_chain_signal_strength.patch
  5. 2
      package/iw/patches/120-tdls_peer_indentation.patch
  6. 34
      package/iw/patches/130-antenna_gain.patch

@ -8,12 +8,12 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=iw
PKG_VERSION:=3.3
PKG_VERSION:=3.6
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=http://wireless.kernel.org/download/iw/
PKG_MD5SUM:=146ad14cdeb39fb88b21efdbb28787d1
PKG_MD5SUM:=1c18bfbbc8773629e5e8ac733a39540c
include $(INCLUDE_DIR)/package.mk

@ -1,284 +1,96 @@
--- a/nl80211.h
+++ b/nl80211.h
@@ -156,21 +156,23 @@
* @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
* or %NL80211_ATTR_MAC.
@@ -565,6 +565,14 @@
* %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
* %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
*
- * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
- * %NL80222_CMD_NEW_BEACON message)
- * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
- * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
- * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
- * Following attributes are provided for drivers that generate full Beacon
- * and Probe Response frames internally: %NL80211_ATTR_SSID,
+ * @NL80211_CMD_GET_BEACON: (not used)
+ * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
+ * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
+ * attributes. For drivers that generate the beacon and probe responses
+ * internally, the following attributes must be provided: %NL80211_ATTR_IE,
+ * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
+ * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
+ * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
+ * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
+ * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
* %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
* %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
* %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP,
- * %NL80211_ATTR_IE_ASSOC_RESP.
- * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
- * parameters are like for %NL80211_CMD_SET_BEACON.
- * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
+ * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
+ * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
+ * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
*
* @NL80211_CMD_GET_STATION: Get station attributes for station identified by
* %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
@@ -367,6 +369,11 @@
* %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
* %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
* %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+ * Background scan period can optionally be
+ * specified in %NL80211_ATTR_BG_SCAN_PERIOD,
+ * if not specified default background scan configuration
+ * in driver is used and if period value is 0, bg scan will be disabled.
+ * This attribute is ignored if driver does not support roam scan.
* It is also sent as an event, with the BSSID and response IEs when the
* connection is established or failed to be established. This can be
* determined by the STATUS_CODE attribute.
@@ -541,6 +548,11 @@
* @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
* No Acknowledgement Policy should be applied.
*
+ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
+ * independently of the userspace SME, send this event indicating
+ * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
+ * %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
+ * its %NL80211_ATTR_WDEV identifier. It must have been created with
+ * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
+ * P2P Device can be used for P2P operations, e.g. remain-on-channel and
+ * public action frame TX.
+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
+ * its %NL80211_ATTR_WDEV identifier.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -565,8 +577,10 @@ enum nl80211_commands {
NL80211_CMD_GET_BEACON,
NL80211_CMD_SET_BEACON,
- NL80211_CMD_NEW_BEACON,
- NL80211_CMD_DEL_BEACON,
+ NL80211_CMD_START_AP,
+ NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
+ NL80211_CMD_STOP_AP,
+ NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
@@ -708,6 +716,9 @@ enum nl80211_commands {
NL80211_CMD_GET_STATION,
NL80211_CMD_SET_STATION,
@@ -680,6 +694,8 @@ enum nl80211_commands {
NL80211_CMD_CH_SWITCH_NOTIFY,
NL80211_CMD_SET_NOACK_MAP,
+ NL80211_CMD_CH_SWITCH_NOTIFY,
+ NL80211_CMD_START_P2P_DEVICE,
+ NL80211_CMD_STOP_P2P_DEVICE,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1193,6 +1209,19 @@ enum nl80211_commands {
* @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
* up to 16 TIDs.
*
+ * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
+ * used by the drivers which has MLME in firmware and does not have support
+ * to report per station tx/rx activity to free up the staion entry from
+ * the list. This needs to be used when the driver advertises the
+ * capability to timeout the stations.
+ *
+ * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
+ * this attribute is (depending on the driver capabilities) added to
+ * received frames indicated with %NL80211_CMD_FRAME.
+ *
+ * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
+ * or 0 to disable background scan.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1438,6 +1467,12 @@ enum nl80211_attrs {
@@ -1506,6 +1517,8 @@ enum nl80211_attrs {
NL80211_ATTR_NOACK_MAP,
NL80211_ATTR_USER_REG_HINT_TYPE,
+ NL80211_ATTR_INACTIVITY_TIMEOUT,
+
+ NL80211_ATTR_RX_SIGNAL_DBM,
+
+ NL80211_ATTR_BG_SCAN_PERIOD,
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -1475,6 +1510,7 @@ enum nl80211_attrs {
#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
@@ -1575,6 +1588,10 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_MESH_POINT: mesh point
* @NL80211_IFTYPE_P2P_CLIENT: P2P client
* @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
+ * and therefore can't be created in the normal ways, use the
+ * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
+ * commands to create and destroy one
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -1593,6 +1610,7 @@ enum nl80211_iftype {
NL80211_IFTYPE_MESH_POINT,
NL80211_IFTYPE_P2P_CLIENT,
NL80211_IFTYPE_P2P_GO,
+ NL80211_IFTYPE_P2P_DEVICE,
#define NL80211_MAX_SUPP_RATES 32
+#define NL80211_MAX_SUPP_HT_RATES 77
#define NL80211_MAX_SUPP_REG_RULES 32
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
@@ -1536,7 +1572,11 @@ enum nl80211_iftype {
* @NL80211_STA_FLAG_WME: station is WME/QoS capable
* @NL80211_STA_FLAG_MFP: station uses management frame protection
* @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
- * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer
+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
+ * only be used in managed mode (even in the flags mask). Note that the
+ * flag can't be changed, it is only valid while adding a station, and
+ * attempts to change it will silently be ignored (rather than rejected
+ * as errors.)
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined
* @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
@@ -1651,6 +1691,10 @@ enum nl80211_sta_bss_param {
* containing info as possible, see &enum nl80211_sta_bss_param
* @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
/* keep last */
NUM_NL80211_IFTYPES,
@@ -1744,6 +1762,8 @@ enum nl80211_sta_bss_param {
* @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
+ * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
+ * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
* @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
* @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -1673,6 +1717,10 @@ enum nl80211_sta_info {
NL80211_STA_INFO_BSS_PARAM,
NL80211_STA_INFO_CONNECTED_TIME,
@@ -1768,6 +1788,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_STA_FLAGS,
+ NL80211_STA_INFO_BEACON_LOSS,
+ NL80211_STA_INFO_T_OFFSET,
NL80211_STA_INFO_BEACON_LOSS,
NL80211_STA_INFO_T_OFFSET,
+ NL80211_STA_INFO_CHAIN_SIGNAL,
+ NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -2098,8 +2146,18 @@ enum nl80211_mntr_flags {
* TUs) during which a mesh STA can send only one Action frame containing a
* PERR element.
*
+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
+ * or forwarding entity (default is TRUE - forwarding entity)
+ *
+ * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
+ * threshold for average signal strength of candidate station to establish
+ * a peer link.
+ *
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
*
+ * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
+ * to synchronize to for 11s default synchronization method (see 11C.12.2.2)
+ *
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
enum nl80211_meshconf_params {
@@ -2122,6 +2180,9 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_HWMP_RANN_INTERVAL,
NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
+ NL80211_MESHCONF_FORWARDING,
+ NL80211_MESHCONF_RSSI_THRESHOLD,
+ NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2161,6 +2222,11 @@ enum nl80211_meshconf_params {
* complete (unsecured) mesh peering without the need of a userspace daemon.
*
* @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
+ * vendor specific synchronization method or disable it to use the default
+ * neighbor offset synchronization
+ *
* @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
*/
enum nl80211_mesh_setup_params {
@@ -2170,6 +2236,7 @@ enum nl80211_mesh_setup_params {
NL80211_MESH_SETUP_IE,
NL80211_MESH_SETUP_USERSPACE_AUTH,
NL80211_MESH_SETUP_USERSPACE_AMPE,
+ NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
/* keep last */
__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
@@ -2179,7 +2246,7 @@ enum nl80211_mesh_setup_params {
/**
* enum nl80211_txq_attr - TX queue parameter attributes
* @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
- * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
* @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
* disabled
* @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
@@ -2192,7 +2259,7 @@ enum nl80211_mesh_setup_params {
*/
enum nl80211_txq_attr {
__NL80211_TXQ_ATTR_INVALID,
- NL80211_TXQ_ATTR_QUEUE,
+ NL80211_TXQ_ATTR_AC,
NL80211_TXQ_ATTR_TXOP,
NL80211_TXQ_ATTR_CWMIN,
NL80211_TXQ_ATTR_CWMAX,
@@ -2203,13 +2270,21 @@ enum nl80211_txq_attr {
NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
};
-enum nl80211_txq_q {
- NL80211_TXQ_Q_VO,
- NL80211_TXQ_Q_VI,
- NL80211_TXQ_Q_BE,
- NL80211_TXQ_Q_BK
+enum nl80211_ac {
+ NL80211_AC_VO,
+ NL80211_AC_VI,
+ NL80211_AC_BE,
+ NL80211_AC_BK,
+ NL80211_NUM_ACS
};
+/* backward compat */
+#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC
+#define NL80211_TXQ_Q_VO NL80211_AC_VO
+#define NL80211_TXQ_Q_VI NL80211_AC_VI
+#define NL80211_TXQ_Q_BE NL80211_AC_BE
+#define NL80211_TXQ_Q_BK NL80211_AC_BK
+
enum nl80211_channel_type {
NL80211_CHAN_NO_HT,
NL80211_CHAN_HT20,
@@ -2395,12 +2470,15 @@ enum nl80211_key_attributes {
* in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
* 1 = 500 kbps) but without the IE length restriction (at most
* %NL80211_MAX_SUPP_RATES in a single array).
+ * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
+ * in an array of MCS numbers.
* @__NL80211_TXRATE_AFTER_LAST: internal
* @NL80211_TXRATE_MAX: highest TX rate attribute
*/
enum nl80211_tx_rate_attributes {
__NL80211_TXRATE_INVALID,
NL80211_TXRATE_LEGACY,
+ NL80211_TXRATE_MCS,
/* keep last */
__NL80211_TXRATE_AFTER_LAST,
@@ -2786,10 +2864,13 @@ enum nl80211_ap_sme_features {
* TX status to the socket error queue when requested with the
* socket option.
* @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
+ * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
+ * the connected inactive stations in AP mode.
@@ -2994,12 +3016,18 @@ enum nl80211_ap_sme_features {
* @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
* to work properly to suppport receiving regulatory hints from
* cellular base stations.
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
+ * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
+ * in the interface combinations, even when it's only used for scan
+ * and remain-on-channel. This could be due to, for example, the
+ * remain-on-channel implementation requiring a channel context.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
NL80211_FEATURE_HT_IBSS = 1 << 1,
+ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
- NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
- NL80211_FEATURE_HT_IBSS = 1 << 1,
- NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
- NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+ NL80211_FEATURE_HT_IBSS = 1 << 1,
+ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+ NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
+ NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
};
/**

@ -1,6 +1,6 @@
--- a/station.c
+++ b/station.c
@@ -29,13 +29,43 @@ enum plink_actions {
@@ -29,13 +29,47 @@ enum plink_actions {
PLINK_ACTION_BLOCK,
};
@ -10,6 +10,7 @@
+
+ static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = {
+ [NL80211_RATE_INFO_BITRATE] = { .type = NLA_U16 },
+ [NL80211_RATE_INFO_BITRATE32] = { .type = NLA_U32 },
+ [NL80211_RATE_INFO_MCS] = { .type = NLA_U8 },
+ [NL80211_RATE_INFO_40_MHZ_WIDTH] = { .type = NLA_FLAG },
+ [NL80211_RATE_INFO_SHORT_GI] = { .type = NLA_FLAG },
@ -21,11 +22,14 @@
+ if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX, nla, rate_policy)) {
+ fprintf(stderr, "failed to parse nested rate attributes!\n");
+ } else {
+ int rate = 0;
+ printf("\n\t%s:\t", name);
+ if (rinfo[NL80211_RATE_INFO_BITRATE]) {
+ int rate = nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]);
+ if (rinfo[NL80211_RATE_INFO_BITRATE32])
+ rate = nla_get_u32(rinfo[NL80211_RATE_INFO_BITRATE32]);
+ else if (rinfo[NL80211_RATE_INFO_BITRATE])
+ rate = nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]);
+ if (rate > 0)
+ printf("%d.%d MBit/s", rate / 10, rate % 10);
+ }
+
+ if (rinfo[NL80211_RATE_INFO_MCS])
+ printf(" MCS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_MCS]));
@ -45,20 +49,21 @@
char mac_addr[20], state_name[10], dev[20];
struct nl80211_sta_flag_update *sta_flags;
static struct nla_policy stats_policy[NL80211_STA_INFO_MAX + 1] = {
@@ -46,6 +76,7 @@ static int print_sta_handler(struct nl_m
[NL80211_STA_INFO_TX_PACKETS] = { .type = NLA_U32 },
@@ -47,6 +81,7 @@ static int print_sta_handler(struct nl_m
[NL80211_STA_INFO_SIGNAL] = { .type = NLA_U8 },
[NL80211_STA_INFO_T_OFFSET] = { .type = NLA_U64 },
[NL80211_STA_INFO_TX_BITRATE] = { .type = NLA_NESTED },
+ [NL80211_STA_INFO_RX_BITRATE] = { .type = NLA_NESTED },
[NL80211_STA_INFO_LLID] = { .type = NLA_U16 },
[NL80211_STA_INFO_PLID] = { .type = NLA_U16 },
[NL80211_STA_INFO_PLINK_STATE] = { .type = NLA_U8 },
@@ -55,13 +86,6 @@ static int print_sta_handler(struct nl_m
@@ -56,14 +91,6 @@ static int print_sta_handler(struct nl_m
{ .minlen = sizeof(struct nl80211_sta_flag_update) },
};
- static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = {
- [NL80211_RATE_INFO_BITRATE] = { .type = NLA_U16 },
- [NL80211_RATE_INFO_BITRATE32] = { .type = NLA_U32 },
- [NL80211_RATE_INFO_MCS] = { .type = NLA_U8 },
- [NL80211_RATE_INFO_40_MHZ_WIDTH] = { .type = NLA_FLAG },
- [NL80211_RATE_INFO_SHORT_GI] = { .type = NLA_FLAG },
@ -67,20 +72,23 @@
nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
genlmsg_attrlen(gnlh, 0), NULL);
@@ -114,25 +138,8 @@ static int print_sta_handler(struct nl_m
printf("\n\tsignal avg:\t%d dBm",
(int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL_AVG]));
@@ -119,28 +146,8 @@ static int print_sta_handler(struct nl_m
printf("\n\tToffset:\t%lld us",
(unsigned long long)nla_get_u64(sinfo[NL80211_STA_INFO_T_OFFSET]));
- if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
- if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX,
- sinfo[NL80211_STA_INFO_TX_BITRATE], rate_policy)) {
- fprintf(stderr, "failed to parse nested rate attributes!\n");
- } else {
- int rate = 0;
- printf("\n\ttx bitrate:\t");
- if (rinfo[NL80211_RATE_INFO_BITRATE]) {
- int rate = nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]);
- if (rinfo[NL80211_RATE_INFO_BITRATE32])
- rate = nla_get_u32(rinfo[NL80211_RATE_INFO_BITRATE32]);
- else if (rinfo[NL80211_RATE_INFO_BITRATE])
- rate = nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]);
- if (rate > 0)
- printf("%d.%d MBit/s", rate / 10, rate % 10);
- }
-
- if (rinfo[NL80211_RATE_INFO_MCS])
- printf(" MCS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_MCS]));

@ -1,6 +1,6 @@
--- a/station.c
+++ b/station.c
@@ -61,6 +61,33 @@ static void print_sta_bitrate(struct nla
@@ -65,6 +65,33 @@ static void print_sta_bitrate(struct nla
}
}
@ -34,7 +34,7 @@
static int print_sta_handler(struct nl_msg *msg, void *arg)
{
struct nlattr *tb[NL80211_ATTR_MAX + 1];
@@ -84,7 +111,10 @@ static int print_sta_handler(struct nl_m
@@ -89,7 +116,10 @@ static int print_sta_handler(struct nl_m
[NL80211_STA_INFO_TX_FAILED] = { .type = NLA_U32 },
[NL80211_STA_INFO_STA_FLAGS] =
{ .minlen = sizeof(struct nl80211_sta_flag_update) },
@ -45,7 +45,7 @@
nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
genlmsg_attrlen(gnlh, 0), NULL);
@@ -131,12 +161,18 @@ static int print_sta_handler(struct nl_m
@@ -136,12 +166,19 @@ static int print_sta_handler(struct nl_m
if (sinfo[NL80211_STA_INFO_TX_FAILED])
printf("\n\ttx failed:\t%u",
nla_get_u32(sinfo[NL80211_STA_INFO_TX_FAILED]));
@ -65,6 +65,7 @@
+ printf("\n\tsignal avg:\t%d %sdBm",
+ (int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL_AVG]),
+ chain);
print_sta_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], "tx bitrate");
print_sta_bitrate(sinfo[NL80211_STA_INFO_RX_BITRATE], "rx bitrate");
+
if (sinfo[NL80211_STA_INFO_T_OFFSET])
printf("\n\tToffset:\t%lld us",
(unsigned long long)nla_get_u64(sinfo[NL80211_STA_INFO_T_OFFSET]));

@ -1,6 +1,6 @@
--- a/station.c
+++ b/station.c
@@ -258,7 +258,7 @@ static int print_sta_handler(struct nl_m
@@ -267,7 +267,7 @@ static int print_sta_handler(struct nl_m
}
if (sta_flags->mask & BIT(NL80211_STA_FLAG_TDLS_PEER)) {

@ -0,0 +1,34 @@
--- a/phy.c
+++ b/phy.c
@@ -359,3 +359,31 @@ COMMAND(set, antenna, "<bitmap> | all |
NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna,
"Set a bitmap of allowed antennas to use for TX and RX.\n"
"The driver may reject antenna configurations it cannot support.");
+
+static int handle_antenna_gain(struct nl80211_state *state,
+ struct nl_cb *cb,
+ struct nl_msg *msg,
+ int argc, char **argv,
+ enum id_input id)
+{
+ char *endptr;
+ int dbm;
+
+ /* get the required args */
+ if (argc != 1)
+ return 1;
+
+ dbm = strtol(argv[0], &endptr, 10);
+ if (*endptr)
+ return 2;
+
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_GAIN, dbm);
+
+ return 0;
+
+ nla_put_failure:
+ return -ENOBUFS;
+}
+COMMAND(set, antenna_gain, "<antenna gain in dBm>",
+ NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna_gain,
+ "Specify antenna gain.");
Loading…
Cancel
Save