Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44571master
parent
b694c45d33
commit
dccefe7b53
@ -0,0 +1,202 @@ |
||||
From 884d3962ef4787c8cf0b8a7a673531c623d1dff8 Mon Sep 17 00:00:00 2001
|
||||
From: Darren Etheridge <detheridge@ti.com>
|
||||
Date: Fri, 2 Aug 2013 15:35:36 -0500
|
||||
Subject: [PATCH 334/752] video: da8xx-fb: adding dt support
|
||||
|
||||
Enhancing driver to enable probe triggered by a corresponding dt entry.
|
||||
|
||||
Add da8xx-fb.txt documentation to devicetree section.
|
||||
|
||||
Obtain fb_videomode details for the connected lcd panel using the
|
||||
display timing details present in DT.
|
||||
|
||||
Ensure that platform data is present before checking whether platform
|
||||
callback is present (the one used to control backlight). So far this
|
||||
was not an issue as driver was purely non-DT triggered, but now DT
|
||||
support has been added this check must be performed.
|
||||
|
||||
v2: squashing multiple commits from Afzal Mohammed (afzal@ti.com)
|
||||
v3: remove superfluous cast
|
||||
v4: expose both ti,am3352-lcdc and ti,da830-lcdc for .compatible
|
||||
as driver can use enhanced features of all version of the
|
||||
silicon block.
|
||||
v5: addressed review comments from Prabhakar Lad
|
||||
v6: Changed the .compatible naming to match the existing drm bindings
|
||||
for am33xx devices
|
||||
v7: clarify which compatible to use in the documentation for DA850
|
||||
|
||||
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
|
||||
Signed-off-by: Darren Etheridge <detheridge@ti.com>
|
||||
---
|
||||
.../devicetree/bindings/video/da8xx-fb.txt | 42 +++++++++++++
|
||||
drivers/video/fbdev/da8xx-fb.c | 66 +++++++++++++++++++-
|
||||
2 files changed, 105 insertions(+), 3 deletions(-)
|
||||
create mode 100644 Documentation/devicetree/bindings/video/da8xx-fb.txt
|
||||
|
||||
--- /dev/null
|
||||
+++ b/Documentation/devicetree/bindings/video/da8xx-fb.txt
|
||||
@@ -0,0 +1,42 @@
|
||||
+TI LCD Controller on DA830/DA850/AM335x SoC's
|
||||
+
|
||||
+Required properties:
|
||||
+- compatible:
|
||||
+ DA830, DA850 - "ti,da8xx-tilcdc"
|
||||
+ AM335x SoC's - "ti,am33xx-tilcdc"
|
||||
+- reg: Address range of lcdc register set
|
||||
+- interrupts: lcdc interrupt
|
||||
+- display-timings: typical videomode of lcd panel, represented as child.
|
||||
+ Refer Documentation/devicetree/bindings/video/display-timing.txt for
|
||||
+ display timing binding details. If multiple videomodes are mentioned
|
||||
+ in display timings node, typical videomode has to be mentioned as the
|
||||
+ native mode or it has to be first child (driver cares only for native
|
||||
+ videomode).
|
||||
+
|
||||
+Recommended properties:
|
||||
+- ti,hwmods: Name of the hwmod associated to the LCDC
|
||||
+
|
||||
+Example for am335x SoC's:
|
||||
+
|
||||
+lcdc@4830e000 {
|
||||
+ compatible = "ti,am33xx-tilcdc";
|
||||
+ reg = <0x4830e000 0x1000>;
|
||||
+ interrupts = <36>;
|
||||
+ ti,hwmods = "lcdc";
|
||||
+ status = "okay";
|
||||
+ display-timings {
|
||||
+ 800x480p62 {
|
||||
+ clock-frequency = <30000000>;
|
||||
+ hactive = <800>;
|
||||
+ vactive = <480>;
|
||||
+ hfront-porch = <39>;
|
||||
+ hback-porch = <39>;
|
||||
+ hsync-len = <47>;
|
||||
+ vback-porch = <29>;
|
||||
+ vfront-porch = <13>;
|
||||
+ vsync-len = <2>;
|
||||
+ hsync-active = <1>;
|
||||
+ vsync-active = <1>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
--- a/drivers/video/fbdev/da8xx-fb.c
|
||||
+++ b/drivers/video/fbdev/da8xx-fb.c
|
||||
@@ -36,6 +36,7 @@
|
||||
#include <linux/slab.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/lcm.h>
|
||||
+#include <video/of_display_timing.h>
|
||||
#include <video/da8xx-fb.h>
|
||||
#include <asm/div64.h>
|
||||
|
||||
@@ -1317,12 +1318,54 @@ static struct fb_ops da8xx_fb_ops = {
|
||||
.fb_blank = cfb_blank,
|
||||
};
|
||||
|
||||
+static struct lcd_ctrl_config *da8xx_fb_create_cfg(struct platform_device *dev)
|
||||
+{
|
||||
+ struct lcd_ctrl_config *cfg;
|
||||
+
|
||||
+ cfg = devm_kzalloc(&dev->dev, sizeof(struct fb_videomode), GFP_KERNEL);
|
||||
+ if (!cfg)
|
||||
+ return NULL;
|
||||
+
|
||||
+ /* default values */
|
||||
+
|
||||
+ if (lcd_revision == LCD_VERSION_1)
|
||||
+ cfg->bpp = 16;
|
||||
+ else
|
||||
+ cfg->bpp = 32;
|
||||
+
|
||||
+ /*
|
||||
+ * For panels so far used with this LCDC, below statement is sufficient.
|
||||
+ * For new panels, if required, struct lcd_ctrl_cfg fields to be updated
|
||||
+ * with additional/modified values. Those values would have to be then
|
||||
+ * obtained from dt(requiring new dt bindings).
|
||||
+ */
|
||||
+
|
||||
+ cfg->panel_shade = COLOR_ACTIVE;
|
||||
+
|
||||
+ return cfg;
|
||||
+}
|
||||
+
|
||||
static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
|
||||
{
|
||||
struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev);
|
||||
struct fb_videomode *lcdc_info;
|
||||
+ struct device_node *np = dev->dev.of_node;
|
||||
int i;
|
||||
|
||||
+ if (np) {
|
||||
+ lcdc_info = devm_kzalloc(&dev->dev,
|
||||
+ sizeof(struct fb_videomode),
|
||||
+ GFP_KERNEL);
|
||||
+ if (!lcdc_info)
|
||||
+ return NULL;
|
||||
+
|
||||
+ if (of_get_fb_videomode(np, lcdc_info, OF_USE_NATIVE_MODE)) {
|
||||
+ dev_err(&dev->dev, "timings not available in DT\n");
|
||||
+ return NULL;
|
||||
+ }
|
||||
+ return lcdc_info;
|
||||
+ }
|
||||
+
|
||||
for (i = 0, lcdc_info = known_lcd_panels;
|
||||
i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
|
||||
if (strcmp(fb_pdata->type, lcdc_info->name) == 0)
|
||||
@@ -1351,7 +1394,7 @@ static int fb_probe(struct platform_devi
|
||||
int ret;
|
||||
unsigned long ulcm;
|
||||
|
||||
- if (fb_pdata == NULL) {
|
||||
+ if (fb_pdata == NULL && !device->dev.of_node) {
|
||||
dev_err(&device->dev, "Can not get platform data\n");
|
||||
return -ENOENT;
|
||||
}
|
||||
@@ -1391,7 +1434,10 @@ static int fb_probe(struct platform_devi
|
||||
break;
|
||||
}
|
||||
|
||||
- lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
|
||||
+ if (device->dev.of_node)
|
||||
+ lcd_cfg = da8xx_fb_create_cfg(device);
|
||||
+ else
|
||||
+ lcd_cfg = fb_pdata->controller_data;
|
||||
|
||||
if (!lcd_cfg) {
|
||||
ret = -EINVAL;
|
||||
@@ -1410,7 +1456,7 @@ static int fb_probe(struct platform_devi
|
||||
par->dev = &device->dev;
|
||||
par->lcdc_clk = tmp_lcdc_clk;
|
||||
par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
|
||||
- if (fb_pdata->panel_power_ctrl) {
|
||||
+ if (fb_pdata && fb_pdata->panel_power_ctrl) {
|
||||
par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
|
||||
par->panel_power_ctrl(1);
|
||||
}
|
||||
@@ -1654,12 +1700,26 @@ static int fb_resume(struct device *dev)
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(fb_pm_ops, fb_suspend, fb_resume);
|
||||
|
||||
+#if IS_ENABLED(CONFIG_OF)
|
||||
+static const struct of_device_id da8xx_fb_of_match[] = {
|
||||
+ /*
|
||||
+ * this driver supports version 1 and version 2 of the
|
||||
+ * Texas Instruments lcd controller (lcdc) hardware block
|
||||
+ */
|
||||
+ {.compatible = "ti,da8xx-tilcdc", },
|
||||
+ {.compatible = "ti,am33xx-tilcdc", },
|
||||
+ {},
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, da8xx_fb_of_match);
|
||||
+#endif
|
||||
+
|
||||
static struct platform_driver da8xx_fb_driver = {
|
||||
.probe = fb_probe,
|
||||
.remove = fb_remove,
|
||||
.driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
+ .of_match_table = of_match_ptr(da8xx_fb_of_match),
|
||||
.pm = &fb_pm_ops,
|
||||
},
|
||||
};
|
@ -0,0 +1,91 @@ |
||||
From 9a1a810516ae9cb3259b898b6879901c5b44fa90 Mon Sep 17 00:00:00 2001
|
||||
From: Prathap M S <msprathap@ti.com>
|
||||
Date: Mon, 2 Sep 2013 12:05:23 +0530
|
||||
Subject: [PATCH 343/752] video: da8xx-fb: Add API to register wait for vsync
|
||||
callback
|
||||
|
||||
This patch adds APIs to register and unregister wait for vsync callback.
|
||||
This is derived from commit id 2d44302545da24fd22912d964102bc31a7489e97
|
||||
This commit id was part of 3.2 kernel sources.
|
||||
|
||||
Signed-off-by: Prathap M S <msprathap@ti.com>
|
||||
---
|
||||
drivers/video/fbdev/da8xx-fb.c | 33 +++++++++++++++++++++++++++++++++
|
||||
include/video/da8xx-fb.h | 4 ++++
|
||||
2 files changed, 37 insertions(+)
|
||||
|
||||
--- a/drivers/video/fbdev/da8xx-fb.c
|
||||
+++ b/drivers/video/fbdev/da8xx-fb.c
|
||||
@@ -197,6 +197,9 @@ static struct fb_fix_screeninfo da8xx_fb
|
||||
.accel = FB_ACCEL_NONE
|
||||
};
|
||||
|
||||
+static vsync_callback_t vsync_cb_handler;
|
||||
+static void *vsync_cb_arg;
|
||||
+
|
||||
static struct fb_videomode known_lcd_panels[] = {
|
||||
/* Sharp LCD035Q3DG01 */
|
||||
[0] = {
|
||||
@@ -831,6 +834,32 @@ static int lcd_init(struct da8xx_fb_par
|
||||
return 0;
|
||||
}
|
||||
|
||||
+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx)
|
||||
+{
|
||||
+ if ((vsync_cb_handler == NULL) && (vsync_cb_arg == NULL)) {
|
||||
+ vsync_cb_arg = arg;
|
||||
+ vsync_cb_handler = handler;
|
||||
+ } else {
|
||||
+ return -EEXIST;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+EXPORT_SYMBOL(register_vsync_cb);
|
||||
+
|
||||
+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx)
|
||||
+{
|
||||
+ if ((vsync_cb_handler == handler) && (vsync_cb_arg == arg)) {
|
||||
+ vsync_cb_handler = NULL;
|
||||
+ vsync_cb_arg = NULL;
|
||||
+ } else {
|
||||
+ return -ENXIO;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+EXPORT_SYMBOL(unregister_vsync_cb);
|
||||
+
|
||||
/* IRQ handler for version 2 of LCDC */
|
||||
static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
|
||||
{
|
||||
@@ -868,6 +897,8 @@ static irqreturn_t lcdc_irq_handler_rev0
|
||||
LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
|
||||
par->vsync_flag = 1;
|
||||
wake_up_interruptible(&par->vsync_wait);
|
||||
+ if (vsync_cb_handler)
|
||||
+ vsync_cb_handler(vsync_cb_arg);
|
||||
}
|
||||
|
||||
if (stat & LCD_END_OF_FRAME1) {
|
||||
@@ -943,6 +974,8 @@ static irqreturn_t lcdc_irq_handler_rev0
|
||||
LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
|
||||
par->vsync_flag = 1;
|
||||
wake_up_interruptible(&par->vsync_wait);
|
||||
+ if (vsync_cb_handler)
|
||||
+ vsync_cb_handler(vsync_cb_arg);
|
||||
}
|
||||
}
|
||||
|
||||
--- a/include/video/da8xx-fb.h
|
||||
+++ b/include/video/da8xx-fb.h
|
||||
@@ -91,5 +91,9 @@ struct lcd_sync_arg {
|
||||
/* Proprietary FB_SYNC_ flags */
|
||||
#define FB_SYNC_CLK_INVERT 0x40000000
|
||||
|
||||
+typedef void (*vsync_callback_t)(void *arg);
|
||||
+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx);
|
||||
+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx);
|
||||
+
|
||||
#endif /* ifndef DA8XX_FB_H */
|
||||
|
@ -0,0 +1,38 @@ |
||||
From c99bd415829ef29adf71bb1e1b577650f10e93f5 Mon Sep 17 00:00:00 2001
|
||||
From: Darren Etheridge <detheridge@ti.com>
|
||||
Date: Mon, 4 Nov 2013 12:27:40 -0600
|
||||
Subject: [PATCH 752/752] video/da8xx-fb fix defect with vsync callback
|
||||
invocation
|
||||
|
||||
Fix defect where SGX is running at half of the expected framerate.
|
||||
The original patch (@ commit ID 9a1a810516ae9cb3259b898b6879901c5b44fa90)
|
||||
seems to have a mistake where it only calls the callback
|
||||
for the even or the odd frames depending on the revision of the LCD controller
|
||||
This patch corrects this and invokes the callback for both odd and even frame
|
||||
for just the Rev02 version of the LCDC (won't find an SGX GPU on a Rev01).
|
||||
|
||||
Signed-off-by: Darren Etheridge <detheridge@ti.com>
|
||||
---
|
||||
drivers/video/fbdev/da8xx-fb.c | 4 ++--
|
||||
1 file changed, 2 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/drivers/video/fbdev/da8xx-fb.c
|
||||
+++ b/drivers/video/fbdev/da8xx-fb.c
|
||||
@@ -909,6 +909,8 @@ static irqreturn_t lcdc_irq_handler_rev0
|
||||
LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
|
||||
par->vsync_flag = 1;
|
||||
wake_up_interruptible(&par->vsync_wait);
|
||||
+ if (vsync_cb_handler)
|
||||
+ vsync_cb_handler(vsync_cb_arg);
|
||||
}
|
||||
|
||||
/* Set only when controller is disabled and at the end of
|
||||
@@ -974,8 +976,6 @@ static irqreturn_t lcdc_irq_handler_rev0
|
||||
LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
|
||||
par->vsync_flag = 1;
|
||||
wake_up_interruptible(&par->vsync_wait);
|
||||
- if (vsync_cb_handler)
|
||||
- vsync_cb_handler(vsync_cb_arg);
|
||||
}
|
||||
}
|
||||
|
@ -0,0 +1,155 @@ |
||||
When running with DT, we no longer have a board file that can set up the
|
||||
platform data for wlcore. Allow this data to be passed from DT.
|
||||
|
||||
Since some platforms use a gpio-irq, add support for passing either the
|
||||
irq number or the gpio number. For the latter case, the driver will
|
||||
request the gpio and convert it to the irq number. If an irq is
|
||||
specified, it'll be used as is.
|
||||
|
||||
[Arik - the pdev_data pointer does not belong to us and is freed when
|
||||
the device is released. Dereference to our private data first.]
|
||||
|
||||
Signed-off-by: Ido Yariv <ido@wizery.com>
|
||||
Signed-off-by: Arik Nemtsov <arik@wizery.com>
|
||||
---
|
||||
drivers/net/wireless/ti/wlcore/sdio.c | 71 ++++++++++++++++++++++++++++++++---
|
||||
include/linux/wl12xx.h | 3 +-
|
||||
2 files changed, 67 insertions(+), 7 deletions(-)
|
||||
|
||||
--- a/drivers/net/wireless/ti/wlcore/sdio.c
|
||||
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
|
||||
@@ -34,6 +34,7 @@
|
||||
#include <linux/wl12xx.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/printk.h>
|
||||
+#include <linux/of.h>
|
||||
|
||||
#include "wlcore.h"
|
||||
#include "wl12xx_80211.h"
|
||||
@@ -214,6 +215,61 @@ static struct wl1271_if_operations sdio_
|
||||
.set_block_size = wl1271_sdio_set_block_size,
|
||||
};
|
||||
|
||||
+static const struct of_device_id wlcore_of_match[] = {
|
||||
+ {
|
||||
+ .compatible = "wlcore",
|
||||
+ },
|
||||
+ {}
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, wlcore_of_match);
|
||||
+
|
||||
+static struct wl12xx_platform_data *get_platform_data(struct device *dev)
|
||||
+{
|
||||
+ struct wl12xx_platform_data *pdata;
|
||||
+ struct device_node *np;
|
||||
+ u32 gpio;
|
||||
+
|
||||
+ pdata = wl12xx_get_platform_data();
|
||||
+ if (!IS_ERR(pdata))
|
||||
+ return kmemdup(pdata, sizeof(*pdata), GFP_KERNEL);
|
||||
+
|
||||
+ np = of_find_matching_node(NULL, wlcore_of_match);
|
||||
+ if (!np) {
|
||||
+ dev_err(dev, "No platform data set\n");
|
||||
+ return NULL;
|
||||
+ }
|
||||
+
|
||||
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
|
||||
+ if (!pdata) {
|
||||
+ dev_err(dev, "Can't allocate platform data\n");
|
||||
+ return NULL;
|
||||
+ }
|
||||
+
|
||||
+ if (of_property_read_u32(np, "irq", &pdata->irq)) {
|
||||
+ if (!of_property_read_u32(np, "gpio", &gpio) &&
|
||||
+ !gpio_request_one(gpio, GPIOF_IN, "wlcore_irq")) {
|
||||
+ pdata->gpio = gpio;
|
||||
+ pdata->irq = gpio_to_irq(gpio);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ /* Optional fields */
|
||||
+ pdata->use_eeprom = of_property_read_bool(np, "use-eeprom");
|
||||
+ of_property_read_u32(np, "board-ref-clock", &pdata->board_ref_clock);
|
||||
+ of_property_read_u32(np, "board-tcxo-clock", &pdata->board_tcxo_clock);
|
||||
+ of_property_read_u32(np, "platform-quirks", &pdata->platform_quirks);
|
||||
+
|
||||
+ return pdata;
|
||||
+}
|
||||
+
|
||||
+static void del_platform_data(struct wl12xx_platform_data *pdata)
|
||||
+{
|
||||
+ if (pdata->gpio)
|
||||
+ gpio_free(pdata->gpio);
|
||||
+
|
||||
+ kfree(pdata);
|
||||
+}
|
||||
+
|
||||
static int wl1271_probe(struct sdio_func *func,
|
||||
const struct sdio_device_id *id)
|
||||
{
|
||||
@@ -248,12 +304,9 @@ static int wl1271_probe(struct sdio_func
|
||||
/* Use block mode for transferring over one block size of data */
|
||||
func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
|
||||
|
||||
- pdev_data->pdata = wl12xx_get_platform_data();
|
||||
- if (IS_ERR(pdev_data->pdata)) {
|
||||
- ret = PTR_ERR(pdev_data->pdata);
|
||||
- dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
|
||||
+ pdev_data->pdata = get_platform_data(&func->dev);
|
||||
+ if (!(pdev_data->pdata))
|
||||
goto out_free_glue;
|
||||
- }
|
||||
|
||||
/* if sdio can keep power while host is suspended, enable wow */
|
||||
mmcflags = sdio_get_host_pm_caps(func);
|
||||
@@ -282,7 +335,7 @@ static int wl1271_probe(struct sdio_func
|
||||
if (!glue->core) {
|
||||
dev_err(glue->dev, "can't allocate platform_device");
|
||||
ret = -ENOMEM;
|
||||
- goto out_free_glue;
|
||||
+ goto out_free_pdata;
|
||||
}
|
||||
|
||||
glue->core->dev.parent = &func->dev;
|
||||
@@ -316,6 +369,9 @@ static int wl1271_probe(struct sdio_func
|
||||
out_dev_put:
|
||||
platform_device_put(glue->core);
|
||||
|
||||
+out_free_pdata:
|
||||
+ del_platform_data(pdev_data->pdata);
|
||||
+
|
||||
out_free_glue:
|
||||
kfree(glue);
|
||||
|
||||
@@ -329,11 +385,14 @@ out:
|
||||
static void wl1271_remove(struct sdio_func *func)
|
||||
{
|
||||
struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
|
||||
+ struct wlcore_platdev_data *pdev_data = glue->core->dev.platform_data;
|
||||
+ struct wl12xx_platform_data *pdata = pdev_data->pdata;
|
||||
|
||||
/* Undo decrement done above in wl1271_probe */
|
||||
pm_runtime_get_noresume(&func->dev);
|
||||
|
||||
platform_device_unregister(glue->core);
|
||||
+ del_platform_data(pdata);
|
||||
kfree(glue);
|
||||
}
|
||||
|
||||
--- a/include/linux/wl12xx.h
|
||||
+++ b/include/linux/wl12xx.h
|
||||
@@ -51,11 +51,12 @@ enum {
|
||||
struct wl12xx_platform_data {
|
||||
void (*set_power)(bool enable);
|
||||
/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
|
||||
+ int gpio;
|
||||
int irq;
|
||||
bool use_eeprom;
|
||||
int board_ref_clock;
|
||||
int board_tcxo_clock;
|
||||
- unsigned long platform_quirks;
|
||||
+ u32 platform_quirks;
|
||||
bool pwr_in_suspend;
|
||||
};
|
||||
|
@ -0,0 +1,70 @@ |
||||
--- a/arch/arm/boot/dts/am335x-evmsk.dts
|
||||
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
|
||||
@@ -256,6 +256,39 @@
|
||||
};
|
||||
|
||||
|
||||
+ lcd_pins_s0: lcd_pins_s0 {
|
||||
+ pinctrl-single,pins = <
|
||||
+ 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
|
||||
+ 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
|
||||
+ 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
|
||||
+ 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
|
||||
+ 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
|
||||
+ 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
|
||||
+ 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
|
||||
+ 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
|
||||
+ 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */
|
||||
+ 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */
|
||||
+ 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */
|
||||
+ 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */
|
||||
+ 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */
|
||||
+ 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */
|
||||
+ 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */
|
||||
+ 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */
|
||||
+ 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */
|
||||
+ 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */
|
||||
+ 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */
|
||||
+ 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */
|
||||
+ 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */
|
||||
+ 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */
|
||||
+ 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */
|
||||
+ 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */
|
||||
+ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
|
||||
+ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
|
||||
+ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
|
||||
+ 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
|
||||
+ >;
|
||||
+ };
|
||||
+
|
||||
user_leds_s0: user_leds_s0 {
|
||||
pinctrl-single,pins = <
|
||||
0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
|
||||
@@ -665,6 +698,27 @@
|
||||
rx-num-evt = <32>;
|
||||
};
|
||||
|
||||
+&lcdc {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&lcd_pins_s0>;
|
||||
+ status = "okay";
|
||||
+ display-timings {
|
||||
+ 480x272 {
|
||||
+ hactive = <480>;
|
||||
+ vactive = <272>;
|
||||
+ hback-porch = <43>;
|
||||
+ hfront-porch = <8>;
|
||||
+ hsync-len = <4>;
|
||||
+ vback-porch = <12>;
|
||||
+ vfront-porch = <4>;
|
||||
+ vsync-len = <10>;
|
||||
+ clock-frequency = <9000000>;
|
||||
+ hsync-active = <0>;
|
||||
+ vsync-active = <0>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
tsc {
|
@ -0,0 +1,79 @@ |
||||
--- a/arch/arm/boot/dts/am335x-evmsk.dts
|
||||
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
|
||||
@@ -14,6 +14,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
+#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
|
||||
/ {
|
||||
@@ -26,6 +27,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ wlan {
|
||||
+ compatible = "wlcore";
|
||||
+
|
||||
+ gpio = <31>;
|
||||
+ board-ref-clock = <4>;
|
||||
+ };
|
||||
+
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
@@ -68,6 +76,16 @@
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
+ vmmc_wl: fixedregulator@2 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vmmc-wl";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ gpio = <&gpio1 29 0>;
|
||||
+ startup-delay-us = <70000>;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_leds_s0>;
|
||||
@@ -445,6 +463,20 @@
|
||||
0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
|
||||
>;
|
||||
};
|
||||
+
|
||||
+ wilink_pins: pinmux_wilink_pins {
|
||||
+ pinctrl-single,pins = <
|
||||
+ 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
|
||||
+ 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
|
||||
+ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
|
||||
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
|
||||
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
|
||||
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
|
||||
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
|
||||
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
|
||||
+ >;
|
||||
+ };
|
||||
+
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
@@ -682,6 +714,16 @@
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
};
|
||||
|
||||
+&mmc2 {
|
||||
+ status = "okay";
|
||||
+ vmmc-supply = <&vmmc_wl>;
|
||||
+ bus-width = <4>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wilink_pins>;
|
||||
+ ti,non-removable;
|
||||
+ keep-power-in-suspend;
|
||||
+};
|
||||
+
|
||||
&mcasp1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcasp1_pins>;
|
Loading…
Reference in new issue