STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN. It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons * ethernet switch and USB diag LEDs * UART * GPIOs Tested and not working: * LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?) * failsafe mode (known problem, needs workaround like other MTK based devices) More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46454master
parent
9c0ed4ce5c
commit
dcae3723fd
@ -0,0 +1,122 @@ |
||||
/dts-v1/; |
||||
|
||||
/include/ "mt7621.dtsi" |
||||
|
||||
/ { |
||||
compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; |
||||
model = "STORYLiNK SAP-G3200U3"; |
||||
|
||||
memory@0 { |
||||
device_type = "memory"; |
||||
reg = <0x0 0x8000000>; |
||||
}; |
||||
|
||||
chosen { |
||||
bootargs = "console=ttyS0,57600"; |
||||
}; |
||||
|
||||
palmbus@1E000000 { |
||||
spi@b00 { |
||||
status = "okay"; |
||||
|
||||
m25p80@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
compatible = "mx25l6405d"; |
||||
reg = <0 0>; |
||||
linux,modalias = "m25p80", "en25q64"; |
||||
spi-max-frequency = <10000000>; |
||||
|
||||
partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x0 0x30000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@30000 { |
||||
label = "u-boot-env"; |
||||
reg = <0x30000 0x1000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@31000 { |
||||
label = "config"; |
||||
reg = <0x31000 0xf000>; |
||||
read-only; |
||||
}; |
||||
|
||||
factory: partition@40000 { |
||||
label = "factory"; |
||||
reg = <0x40000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@50000 { |
||||
label = "firmware"; |
||||
reg = <0x50000 0x7b0000>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
pcie@1e140000 { |
||||
status = "okay"; |
||||
|
||||
pcie0 { |
||||
mt76@0,0 { |
||||
reg = <0x0000 0 0 0 0>; |
||||
device_type = "pci"; |
||||
mediatek,mtd-eeprom = <&factory 0x8000>; |
||||
mediatek,2ghz = <0>; |
||||
}; |
||||
}; |
||||
|
||||
pcie1 { |
||||
mt76@1,0 { |
||||
reg = <0x0000 0 0 0 0>; |
||||
device_type = "pci"; |
||||
mediatek,mtd-eeprom = <&factory 0x0000>; |
||||
mediatek,5ghz = <0>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
ethernet@1e100000 { |
||||
mtd-mac-address = <&factory 0xe006>; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
usb { |
||||
label = "storylink:green:usb"; |
||||
gpios = <&gpio0 13 1>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-keys-polled { |
||||
compatible = "gpio-keys-polled"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
poll-interval = <20>; |
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio0 16 1>; |
||||
linux,code = <0x198>; |
||||
}; |
||||
rfkill { |
||||
label = "rfkill"; |
||||
gpios = <&gpio0 14 1>; |
||||
linux,code = <0xf7>; |
||||
}; |
||||
}; |
||||
|
||||
pinctrl { |
||||
state_default: pinctrl0 { |
||||
gpio { |
||||
ralink,group = "uart3", "jtag"; |
||||
ralink,function = "gpio"; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
@ -0,0 +1,18 @@ |
||||
#
|
||||
# Copyright (C) 2015 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/SAP-G3200U3 |
||||
NAME:=STORYLiNK SAP-G3200U3
|
||||
PACKAGES:=\
|
||||
kmod-usb-core kmod-usb3 kmod-usb-hid \
|
||||
kmod-ledtrig-usbdev
|
||||
endef |
||||
|
||||
define Profile/SAP-G3200U3/Description |
||||
Package set compatible with the STORYLiNK SAP-G3200U3 board.
|
||||
endef |
||||
$(eval $(call Profile,SAP-G3200U3)) |
Loading…
Reference in new issue