lantiq: Enable SPI for the EASY80920 board again

Also switch to the SPI definition provided by vr9.dtsi

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48289

target/linux/lantiq/dts/EASY80920.dtsi

@@ -32,52 +32,6 @@
 
 		};
 
-		spi@E100800 {
-			compatible = "lantiq,spi-xway-broken";
-			reg = <0xE100800 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <22 23 24>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "jedec,spi-nor";
-				reg = <0 0>;
-				spi-max-frequency = <1000000>;
-
-				partition@0 {
-					reg = <0x0 0x20000>;
-					label = "SPI (RO) U-Boot Image";
-					read-only;
-				};
-
-				partition@20000 {
-					reg = <0x20000 0x10000>;
-					label = "ENV_MAC";
-					read-only;
-				};
-
-				partition@30000 {
-					reg = <0x30000 0x10000>;
-					label = "DPF";
-					read-only;
-				};
-
-				partition@40000 {
-					reg = <0x40000 0x10000>;
-					label = "NVRAM";
-					read-only;
-				};
-
-				partition@500000 {
-					reg = <0x50000 0x003a0000>;
-					label = "kernel";
-				};
-			};
-		};
-
 		gpio: pinmux@E100B10 {
 			compatible = "lantiq,pinctrl-xr9";
 			pinctrl-names = "default";
@@ -341,3 +295,44 @@
 		};
 	};
 };
+
+&spi {
+	status = "ok";
+
+	m25p80@3 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <3 0>;
+		spi-max-frequency = <1000000>;
+
+		partition@0 {
+			reg = <0x0 0x20000>;
+			label = "SPI (RO) U-Boot Image";
+			read-only;
+		};
+
+		partition@20000 {
+			reg = <0x20000 0x10000>;
+			label = "ENV_MAC";
+			read-only;
+		};
+
+		partition@30000 {
+			reg = <0x30000 0x10000>;
+			label = "DPF";
+			read-only;
+		};
+
+		partition@40000 {
+			reg = <0x40000 0x10000>;
+			label = "NVRAM";
+			read-only;
+		};
+
+		partition@500000 {
+			reg = <0x50000 0x003a0000>;
+			label = "kernel";
+		};
+	};
+};