ath9k: fix some issues in the ap powersave fixes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36829
master
Felix Fietkau 11 years ago
parent 2d4b5405f7
commit d401a206d9
  1. 71
      package/mac80211/patches/300-pending_work.patch
  2. 2
      package/mac80211/patches/520-mac80211_cur_txpower.patch
  3. 4
      package/mac80211/patches/523-mac80211_configure_antenna_gain.patch

@ -822,7 +822,24 @@
* @ssid_len: Length of SSID given in @ssid.
* @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
* @txpower: TX power in dBm
@@ -562,6 +562,9 @@ enum mac80211_rate_control_flags {
@@ -459,6 +459,8 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it
* would be fragmented by size (this is optional, only used for
* monitor injection).
+ * @IEEE80211_TX_CTL_PS_RESPONSE: This frame is a response to a poll
+ * frame (PS-Poll or uAPSD).
*
* Note: If you have to add new flags to the enumeration, then don't
* forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
@@ -494,6 +496,7 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_STATUS_EOSP = BIT(28),
IEEE80211_TX_CTL_USE_MINRATE = BIT(29),
IEEE80211_TX_CTL_DONTFRAG = BIT(30),
+ IEEE80211_TX_CTL_PS_RESPONSE = BIT(31),
};
#define IEEE80211_TX_CTL_STBC_SHIFT 23
@@ -562,6 +565,9 @@ enum mac80211_rate_control_flags {
/* maximum number of rate stages */
#define IEEE80211_TX_MAX_RATES 4
@ -832,7 +849,7 @@
/**
* struct ieee80211_tx_rate - rate selection/status
*
@@ -602,8 +605,8 @@ static inline void ieee80211_rate_set_vh
@@ -602,8 +608,8 @@ static inline void ieee80211_rate_set_vh
u8 mcs, u8 nss)
{
WARN_ON(mcs & ~0xF);
@ -843,7 +860,7 @@
}
static inline u8
@@ -615,7 +618,7 @@ ieee80211_rate_get_vht_mcs(const struct
@@ -615,7 +621,7 @@ ieee80211_rate_get_vht_mcs(const struct
static inline u8
ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
{
@ -852,7 +869,7 @@
}
/**
@@ -656,7 +659,11 @@ struct ieee80211_tx_info {
@@ -656,7 +662,11 @@ struct ieee80211_tx_info {
struct ieee80211_tx_rate rates[
IEEE80211_TX_MAX_RATES];
s8 rts_cts_rate_idx;
@ -865,7 +882,7 @@
};
/* only needed before rate control */
unsigned long jiffies;
@@ -677,6 +684,8 @@ struct ieee80211_tx_info {
@@ -677,6 +687,8 @@ struct ieee80211_tx_info {
struct {
struct ieee80211_tx_rate driver_rates[
IEEE80211_TX_MAX_RATES];
@ -874,7 +891,7 @@
void *rate_driver_data[
IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
};
@@ -840,6 +849,9 @@ enum mac80211_rx_flags {
@@ -840,6 +852,9 @@ enum mac80211_rx_flags {
* @signal: signal strength when receiving this frame, either in dBm, in dB or
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
@ -884,7 +901,7 @@
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
@@ -871,6 +883,8 @@ struct ieee80211_rx_status {
@@ -871,6 +886,8 @@ struct ieee80211_rx_status {
u8 band;
u8 antenna;
s8 signal;
@ -893,7 +910,7 @@
u8 ampdu_delimiter_crc;
u8 vendor_radiotap_align;
u8 vendor_radiotap_oui[3];
@@ -1018,13 +1032,13 @@ struct ieee80211_conf {
@@ -1018,13 +1035,13 @@ struct ieee80211_conf {
* the driver passed into mac80211.
* @block_tx: Indicates whether transmission must be blocked before the
* scheduled channel switch, as indicated by the AP.
@ -909,7 +926,7 @@
u8 count;
};
@@ -1222,6 +1236,24 @@ enum ieee80211_sta_rx_bandwidth {
@@ -1222,6 +1239,24 @@ enum ieee80211_sta_rx_bandwidth {
};
/**
@ -934,7 +951,7 @@
* struct ieee80211_sta - station table entry
*
* A station table entry represents a station we are possibly
@@ -1248,6 +1280,7 @@ enum ieee80211_sta_rx_bandwidth {
@@ -1248,6 +1283,7 @@ enum ieee80211_sta_rx_bandwidth {
* notifications and capabilities. The value is only valid after
* the station moves to associated state.
* @smps_mode: current SMPS mode (off, static or dynamic)
@ -942,7 +959,7 @@
*/
struct ieee80211_sta {
u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1261,6 +1294,7 @@ struct ieee80211_sta {
@@ -1261,6 +1297,7 @@ struct ieee80211_sta {
u8 rx_nss;
enum ieee80211_sta_rx_bandwidth bandwidth;
enum ieee80211_smps_mode smps_mode;
@ -950,7 +967,7 @@
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
@@ -1416,6 +1450,9 @@ struct ieee80211_tx_control {
@@ -1416,6 +1453,9 @@ struct ieee80211_tx_control {
* for different virtual interfaces. See the doc section on HW queue
* control for more details.
*
@ -960,7 +977,7 @@
* @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any
* P2P Interface. This will be honoured even if more than one interface
* is supported.
@@ -1448,6 +1485,7 @@ enum ieee80211_hw_flags {
@@ -1448,6 +1488,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
IEEE80211_HW_AP_LINK_PS = 1<<22,
IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23,
@ -968,7 +985,7 @@
IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25,
IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26,
};
@@ -3144,6 +3182,25 @@ void ieee80211_sta_set_buffered(struct i
@@ -3144,6 +3185,25 @@ void ieee80211_sta_set_buffered(struct i
u8 tid, bool buffered);
/**
@ -994,7 +1011,7 @@
* ieee80211_tx_status - transmit status callback
*
* Call this function for all transmitted frames after they have been
@@ -4118,7 +4175,7 @@ void ieee80211_send_bar(struct ieee80211
@@ -4118,7 +4178,7 @@ void ieee80211_send_bar(struct ieee80211
* (deprecated; this will be removed once drivers get updated to use
* rate_idx_mask)
* @rate_idx_mask: user-requested (legacy) rate mask
@ -1003,7 +1020,7 @@
* @bss: whether this frame is sent out in AP or IBSS mode
*/
struct ieee80211_tx_rate_control {
@@ -4130,7 +4187,7 @@ struct ieee80211_tx_rate_control {
@@ -4130,7 +4190,7 @@ struct ieee80211_tx_rate_control {
bool rts, short_preamble;
u8 max_rate_idx;
u32 rate_idx_mask;
@ -1012,7 +1029,7 @@
bool bss;
};
@@ -4219,6 +4276,22 @@ bool rate_usable_index_exists(struct iee
@@ -4219,6 +4279,22 @@ bool rate_usable_index_exists(struct iee
return false;
}
@ -3952,6 +3969,24 @@
if (sta_prepare_rate_control(local, sta, gfp)) {
kfree(sta);
@@ -1130,6 +1132,7 @@ static void ieee80211_send_null_response
* ends the poll/service period.
*/
info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
+ IEEE80211_TX_CTL_PS_RESPONSE |
IEEE80211_TX_STATUS_EOSP |
IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -1267,7 +1270,8 @@ ieee80211_sta_ps_deliver_response(struct
* STA may still remain is PS mode after this frame
* exchange.
*/
- info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
+ info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
+ IEEE80211_TX_CTL_PS_RESPONSE;
/*
* Use MoreData flag to indicate whether there are
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2270,6 +2270,7 @@ static const struct nla_policy mntr_flag
@ -4737,7 +4772,7 @@
}
- ath_tx_start_dma(sc, skb, txctl);
+ if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) {
+ if (info->flags & IEEE80211_TX_CTL_PS_RESPONSE) {
+ ath_txq_unlock(sc, txq);
+ txq = sc->tx.uapsdq;
+ ath_txq_lock(sc, txq);

@ -1,6 +1,6 @@
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1605,6 +1605,7 @@ struct ieee80211_hw {
@@ -1608,6 +1608,7 @@ struct ieee80211_hw {
u8 max_tx_aggregation_subframes;
u8 offchannel_tx_hw_queue;
u8 radiotap_mcs_details;

@ -1,6 +1,6 @@
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -988,6 +988,7 @@ enum ieee80211_smps_mode {
@@ -991,6 +991,7 @@ enum ieee80211_smps_mode {
*
* @power_level: requested transmit power (in dBm), backward compatibility
* value only that is set to the minimum of all interfaces
@ -8,7 +8,7 @@
*
* @chandef: the channel definition to tune to
* @radar_enabled: whether radar detection is enabled
@@ -1009,6 +1010,7 @@ struct ieee80211_conf {
@@ -1012,6 +1013,7 @@ struct ieee80211_conf {
u32 flags;
int power_level, dynamic_ps_timeout;
int max_sleep_period;

Loading…
Cancel
Save