mac80211: unify setup of iw htmode for mesh and adhoc

This also fixes mac80211_prepare_vif iw set channel in monitor or
mesh mode.

Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[daniel@makrotopia.org: fixed commit message]
(cherry picked from commit c7fb12beb1d347f1cedc7890dbe2d441f70ccf62)
master
Santiago Piccinini 5 years ago committed by Daniel Golle
parent 06bf1a9b67
commit d2d12346e8
  1. 65
      package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@ -513,7 +513,7 @@ mac80211_prepare_vif() {
case "$mode" in
monitor|mesh)
[ "$auto_channel" -gt 0 ] || iw dev "$ifname" set channel "$channel" $htmode
[ "$auto_channel" -gt 0 ] || iw dev "$ifname" set channel "$channel" $iw_htmode
;;
esac
@ -544,40 +544,40 @@ mac80211_setup_supplicant_noctl() {
wpa_supplicant_run "$ifname"
}
mac80211_setup_adhoc_htmode() {
mac80211_prepare_iw_htmode() {
case "$htmode" in
VHT20|HT20) ibss_htmode=HT20;;
VHT20|HT20) iw_htmode=HT20;;
HT40*|VHT40|VHT160)
case "$hwmode" in
a)
case "$(( ($channel / 4) % 2 ))" in
1) ibss_htmode="HT40+" ;;
0) ibss_htmode="HT40-";;
1) iw_htmode="HT40+" ;;
0) iw_htmode="HT40-";;
esac
;;
*)
case "$htmode" in
HT40+) ibss_htmode="HT40+";;
HT40-) ibss_htmode="HT40-";;
HT40+) iw_htmode="HT40+";;
HT40-) iw_htmode="HT40-";;
*)
if [ "$channel" -lt 7 ]; then
ibss_htmode="HT40+"
iw_htmode="HT40+"
else
ibss_htmode="HT40-"
iw_htmode="HT40-"
fi
;;
esac
;;
esac
[ "$auto_channel" -gt 0 ] && ibss_htmode="HT40+"
[ "$auto_channel" -gt 0 ] && iw_htmode="HT40+"
;;
VHT80)
ibss_htmode="80MHZ"
iw_htmode="80MHZ"
;;
NONE|NOHT)
ibss_htmode="NOHT"
iw_htmode="NOHT"
;;
*) ibss_htmode="" ;;
*) iw_htmode="" ;;
esac
}
@ -615,7 +615,7 @@ mac80211_setup_adhoc() {
mcval=
[ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
iw dev "$ifname" ibss join "$ssid" $freq $ibss_htmode fixed-freq $bssid \
iw dev "$ifname" ibss join "$ssid" $freq $iw_htmode fixed-freq $bssid \
beacon-interval $beacon_int \
${brstr:+basic-rates $brstr} \
${mcval:+mcast-rate $mcval} \
@ -629,40 +629,7 @@ mac80211_setup_mesh() {
[ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
[ -n "$mesh_id" ] && ssid="$mesh_id"
case "$htmode" in
VHT20|HT20) mesh_htmode=HT20;;
HT40*|VHT40)
case "$hwmode" in
a)
case "$(( ($channel / 4) % 2 ))" in
1) mesh_htmode="HT40+" ;;
0) mesh_htmode="HT40-";;
esac
;;
*)
case "$htmode" in
HT40+) mesh_htmode="HT40+";;
HT40-) mesh_htmode="HT40-";;
*)
if [ "$channel" -lt 7 ]; then
mesh_htmode="HT40+"
else
mesh_htmode="HT40-"
fi
;;
esac
;;
esac
;;
VHT80)
mesh_htmode="80Mhz"
;;
VHT160)
mesh_htmode="160Mhz"
;;
*) mesh_htmode="NOHT" ;;
esac
iw dev "$ifname" mesh join "$ssid" freq $freq $mesh_htmode \
iw dev "$ifname" mesh join "$ssid" freq $freq $iw_htmode \
${mcval:+mcast-rate $mcval} \
beacon-interval $beacon_int
}
@ -704,7 +671,6 @@ mac80211_setup_vif() {
;;
adhoc)
wireless_vif_parse_encryption
mac80211_setup_adhoc_htmode
if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then
freq="$(get_freq "$phy" "$channel")"
mac80211_setup_supplicant_noctl || failed=1
@ -818,6 +784,7 @@ drv_mac80211_setup() {
for_each_interface "sta adhoc mesh" mac80211_set_noscan
[ -n "$has_ap" ] && mac80211_hostapd_setup_base "$phy"
mac80211_prepare_iw_htmode
for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
for_each_interface "ap" mac80211_prepare_vif

Loading…
Cancel
Save