jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 2x 10/100/1000 Mbps Ethernet - 128 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm - 3x MMCX connectors - power input: 802.3at PoE or wide range DC (36-57 V) - optional 802.3af PSE - 1x mini-PCIe connector with PCIe, USB buses and SIM slot - 1x mini-PCIe connector with PCIe bus - 1x USB type-A connector - 6x LED, 1x button (hardware reset) - RS232 (MAX3223) and (E)JTAG headers Default configuration: - WAN on eth1 (RJ45 near LEDs with PoE input) - LAN on eth0 (RJ45 near DC jack) - left top LED set to be status LED - all LEDs configurable form user space Flash instruction (do it under U-Boot, using RS232): 1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>master
Piotr Dymacz
9 years ago
committed by
Jo-Philipp Wich
parent
2923b334e5
commit
d2c9b169b3
@ -0,0 +1,158 @@ |
||||
/*
|
||||
* jjPlus JWAP230 board support |
||||
* |
||||
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> |
||||
* |
||||
* Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify it |
||||
* under the terms of the GNU General Public License version 2 as published |
||||
* by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include <linux/pci.h> |
||||
#include <linux/phy.h> |
||||
#include <linux/gpio.h> |
||||
#include <linux/platform_device.h> |
||||
#include <linux/ar8216_platform.h> |
||||
|
||||
#include <asm/mach-ath79/ath79.h> |
||||
#include <asm/mach-ath79/ar71xx_regs.h> |
||||
|
||||
#include "common.h" |
||||
#include "dev-ap9x-pci.h" |
||||
#include "dev-eth.h" |
||||
#include "dev-leds-gpio.h" |
||||
#include "dev-m25p80.h" |
||||
#include "dev-usb.h" |
||||
#include "dev-wmac.h" |
||||
#include "machtypes.h" |
||||
#include "pci.h" |
||||
|
||||
#define JWAP230_GPIO_LED_LED1 23 |
||||
#define JWAP230_GPIO_LED_LED2 22 |
||||
#define JWAP230_GPIO_LED_LED3 21 |
||||
|
||||
#define JWAP230_MAC0_OFFSET 0x0 |
||||
#define JWAP230_MAC1_OFFSET 0x6 |
||||
#define JWAP230_WMAC_CALDATA_OFFSET 0x1000 |
||||
|
||||
static struct gpio_led jwap230_leds_gpio[] __initdata = { |
||||
{ |
||||
.name = "jwap230:green:led1", |
||||
.gpio = JWAP230_GPIO_LED_LED1, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "jwap230:green:led2", |
||||
.gpio = JWAP230_GPIO_LED_LED2, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "jwap230:green:led3", |
||||
.gpio = JWAP230_GPIO_LED_LED3, |
||||
.active_low = 1, |
||||
} |
||||
}; |
||||
|
||||
static const struct ar8327_led_info jwap230_leds_qca8337[] = { |
||||
AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"), |
||||
AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"), |
||||
}; |
||||
|
||||
/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */ |
||||
static struct ar8327_led_cfg jwap230_qca8337_led_cfg = { |
||||
.led_ctrl0 = 0xcf37cf37, |
||||
.led_ctrl1 = 0xcf37cf37, |
||||
.led_ctrl2 = 0xcf37cf37, |
||||
.led_ctrl3 = 0x0, |
||||
.open_drain = true, |
||||
}; |
||||
|
||||
/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */ |
||||
static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = { |
||||
.mode = AR8327_PAD_MAC_RGMII, |
||||
.txclk_delay_en = true, |
||||
.rxclk_delay_en = true, |
||||
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1, |
||||
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, |
||||
.mac06_exchange_dis = true, |
||||
}; |
||||
|
||||
/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */ |
||||
static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = { |
||||
.mode = AR8327_PAD_MAC_SGMII, |
||||
.sgmii_delay_en = true, |
||||
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, |
||||
}; |
||||
|
||||
static struct ar8327_platform_data jwap230_qca8337_data = { |
||||
.pad0_cfg = &jwap230_qca8337_pad0_cfg, |
||||
.pad6_cfg = &jwap230_qca8337_pad6_cfg, |
||||
.port0_cfg = { |
||||
.force_link = 1, |
||||
.speed = AR8327_PORT_SPEED_1000, |
||||
.duplex = 1, |
||||
.txpause = 1, |
||||
.rxpause = 1, |
||||
}, |
||||
.port6_cfg = { |
||||
.force_link = 1, |
||||
.speed = AR8327_PORT_SPEED_1000, |
||||
.duplex = 1, |
||||
.txpause = 1, |
||||
.rxpause = 1, |
||||
}, |
||||
.led_cfg = &jwap230_qca8337_led_cfg, |
||||
.num_leds = ARRAY_SIZE(jwap230_leds_qca8337), |
||||
.leds = jwap230_leds_qca8337, |
||||
}; |
||||
|
||||
static struct mdio_board_info jwap230_mdio0_info[] = { |
||||
{ |
||||
.bus_id = "ag71xx-mdio.0", |
||||
.phy_addr = 0, |
||||
.platform_data = &jwap230_qca8337_data, |
||||
}, |
||||
}; |
||||
|
||||
static void __init jwap230_setup(void) |
||||
{ |
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); |
||||
|
||||
ath79_register_m25p80(NULL); |
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio), |
||||
jwap230_leds_gpio); |
||||
|
||||
mdiobus_register_board_info(jwap230_mdio0_info, |
||||
ARRAY_SIZE(jwap230_mdio0_info)); |
||||
ath79_register_mdio(0, 0x0); |
||||
|
||||
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); |
||||
|
||||
/* QCA9558 GMAC0 is connected to RMGII interface */ |
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; |
||||
ath79_eth0_data.phy_mask = BIT(0); |
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; |
||||
ath79_eth0_pll_data.pll_1000 = 0xa6000000; |
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0); |
||||
ath79_register_eth(0); |
||||
|
||||
/* QCA9558 GMAC1 is connected to SGMII interface */ |
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; |
||||
ath79_eth1_data.speed = SPEED_1000; |
||||
ath79_eth1_data.duplex = DUPLEX_FULL; |
||||
ath79_eth1_pll_data.pll_1000 = 0x03000101; |
||||
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0); |
||||
ath79_register_eth(1); |
||||
|
||||
ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL); |
||||
|
||||
ath79_register_pci(); |
||||
ath79_register_usb(); |
||||
} |
||||
|
||||
MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup); |
||||
Loading…
Reference in new issue