ipq40xx: OpenMesh A42 overhaul

Sort the soc entries in the dts by address and use dtc labels whenever
possible.

Adjust the DTS files, the OpenMesh A42 is actually an IPQ4018 and not an
IPQ4019.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts

@@ -47,6 +47,14 @@
 	};
 
 	soc {
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
 		tcsr@194b000 {
 			/* select hostmode */
 			compatible = "qcom,tcsr";
@@ -55,75 +63,26 @@
 			status = "ok";
 		};
 
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
 		tcsr@1949000 {
 			compatible = "qcom,tcsr";
 			reg = <0x1949000 0x100>;
 			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
 		};
 
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
 		tcsr@1957000 {
 			compatible = "qcom,tcsr";
 			reg = <0x1957000 0x100>;
 			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 		};
 
-		pinctrl@1000000 {
-			serial_pins: serial_pinmux {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio55", "gpio56", "gpio57";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio54";
-				};
-				pinconf {
-					pins = "gpio55", "gpio56", "gpio57";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
-		};
-
-		blsp_dma: dma@7884000 {
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
+		usb2: usb2@60f8800 {
 			status = "ok";
-			cs-gpios = <&tlmm 54 0>;
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <24000000>;
-
-				/* partitions are passed via bootloader */
-			};
 		};
 
 		serial@78af000 {
@@ -132,10 +91,6 @@
 			status = "ok";
 		};
 
-		cryptobam: dma@8e04000 {
-			status = "ok";
-		};
-
 		crypto@8e3a000 {
 			status = "ok";
 		};
@@ -144,39 +99,13 @@
 			status = "ok";
 		};
 
-		usb2_hs_phy: hsphy@a8000 {
-			status = "ok";
-		};
-
-		usb2: usb2@60f8800 {
-			status = "ok";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
 		ess-switch@c000000 {
 			status = "okay";
 		};
 
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
 		edma@c080000 {
 			status = "okay";
 		};
-
-		wifi@a000000 {
-			status = "okay";
-			qcom,ath10k-calibration-variant = "OM-A42";
-		};
-
-		wifi@a800000 {
-			status = "okay";
-			qcom,ath10k-calibration-variant = "OM-A42";
-		};
 	};
 
 	gpio-keys {
@@ -227,6 +156,56 @@
 	};
 };
 
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+	cs-gpios = <&tlmm 54 0>;
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		/* partitions are passed via bootloader */
+	};
+};
+
+&cryptobam {
+	status = "ok";
+};
+
 &gmac0 {
 	qcom,phy_mdio_addr = <4>;
 	qcom,poll_required = <1>;
@@ -242,3 +221,17 @@
 	qcom,forced_duplex = <1>;
 	vlan_tag = <1 0x10>;
 };
+
+&usb2_hs_phy {
+	status = "ok";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "OM-A42";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "OM-A42";
+};

target/linux/ipq40xx/image/Makefile

@@ -61,7 +61,7 @@ TARGET_DEVICES += glinet_gl-b1300
 
 define Device/openmesh_a42
 	$(call Device/FitImageLzma)
-	DEVICE_DTS := qcom-ipq4019-a42
+	DEVICE_DTS := qcom-ipq4018-a42
 	BLOCKSIZE := 64k
 	SUPPORTED_DEVICES := openmesh,a42
 	DEVICE_TITLE := OpenMesh A42

target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch

@@ -14,7 +14,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
  	qcom-apq8074-dragonboard.dtb \
  	qcom-apq8084-ifc6540.dtb \
  	qcom-apq8084-mtp.dtb \
-+	qcom-ipq4019-a42.dtb \
++	qcom-ipq4018-a42.dtb \
  	qcom-ipq4019-ap.dk01.1-c1.dtb \
 +	qcom-ipq4019-ap.dk04.1-c1.dtb \
 +	qcom-ipq4019-fritz4040.dtb \