atheros: v3.18: cleanup register headers

AFAIK, no one AR2315+ chip (AR2315, AR2316, AR2317, AR2318) does not
contain IR block, so remove IR registers definitions. Also remove few
unused macroses.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44722
master
Felix Fietkau 10 years ago
parent 99377012d4
commit cd4462326c
  1. 64
      target/linux/atheros/patches-3.18/100-board.patch

@ -629,7 +629,7 @@
+#endif /* __ASM_MACH_ATH25_WAR_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath25/ar2315_regs.h
@@ -0,0 +1,511 @@
@@ -0,0 +1,470 @@
+/*
+ * Register definitions for AR2315+
+ *
@ -852,17 +852,6 @@
+#define AR2315_GISR_ETHERNET 0x0040
+
+/*
+ * Interrupt routing from IO to the processor IP bits
+ * Define our inter mask and level
+ */
+#define AR2315_INTR_MISCIO SR_IBIT3
+#define AR2315_INTR_WLAN0 SR_IBIT4
+#define AR2315_INTR_ENET0 SR_IBIT5
+#define AR2315_INTR_LOCALPCI SR_IBIT6
+#define AR2315_INTR_WMACPOLL SR_IBIT7
+#define AR2315_INTR_COMPARE SR_IBIT8
+
+/*
+ * Timers
+ */
+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
@ -1110,40 +1099,10 @@
+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
+
+/*
+ * IR Interface Registers
+ */
+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
+
+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
+
+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor */
+#define AR2315_IRCTL_SAMPLECLK_SHFT 1
+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk div */
+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
+
+#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
+
+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
+#define AR2315_IRCFG_INVIN 0x00000001 /* invert in polarity */
+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert out polarity */
+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0
+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100
+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00
+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000
+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000
+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000
+
+#endif /* __ASM_MACH_ATH25_AR2315_REGS_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath25/ar5312_regs.h
@@ -0,0 +1,235 @@
@@ -0,0 +1,224 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@ -1184,6 +1143,10 @@
+
+/*
+ * Address Map
+ *
+ * The AR5312 supports 2 enet MACS, even though many reference boards only
+ * actually use 1 of them (i.e. Only MAC 0 is actually connected to an enet
+ * PHY or PHY switch. The AR2312 supports 1 enet MAC.
+ */
+#define AR5312_WLAN0 0x18000000
+#define AR5312_WLAN1 0x18500000
@ -1196,15 +1159,6 @@
+#define AR5312_FLASH 0x1e000000
+
+/*
+ * AR5312_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available. The AR5312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR5312_NUM_ENET_MAC 2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
@ -1215,12 +1169,6 @@
+#define AR5312_ENET0_MII (AR5312_ENET0 + 0x14)
+#define AR5312_ENET1_MII (AR5312_ENET1 + 0x14)
+
+/*
+ * AR5312_NUM_WMAC defines the number of Wireless MACs that\
+ * should be considered available.
+ */
+#define AR5312_NUM_WMAC 2
+
+/* Reset/Timer Block Address Map */
+#define AR5312_RESETTMR (AR5312_APBBASE + 0x3000)
+#define AR5312_TIMER (AR5312_RESETTMR + 0x0000) /* countdown timer */

Loading…
Cancel
Save