Since that was the last configuration in defconfig directory we can drop the defconfig init script too. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39373master
parent
d66d2ad104
commit
cbc892a549
@ -1,77 +0,0 @@ |
||||
config interface loopback |
||||
option ifname lo |
||||
option proto static |
||||
option ipaddr 127.0.0.1 |
||||
option netmask 255.0.0.0 |
||||
|
||||
config interface lan |
||||
option ifname eth0.1 |
||||
option type bridge |
||||
option proto static |
||||
option ipaddr 192.168.1.1 |
||||
option netmask 255.255.255.0 |
||||
option ip6assign 60 |
||||
|
||||
config interface wan |
||||
option ifname eth1 |
||||
option proto dhcp |
||||
|
||||
config interface wan6 |
||||
option ifname @wan |
||||
option proto dhcpv6 |
||||
|
||||
config globals globals |
||||
option ula_prefix auto |
||||
|
||||
config switch |
||||
option name rtl8366s |
||||
option reset 1 |
||||
option enable_vlan 1 |
||||
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms |
||||
option blinkrate 2 |
||||
|
||||
config switch_vlan |
||||
option device rtl8366s |
||||
option vlan 1 |
||||
option ports "0 1 2 3 5t" |
||||
|
||||
config switch_port |
||||
# Port 1 controls the GREEN configuration of LEDs for |
||||
# the switch and the section does not correspond to a real |
||||
# switch port. |
||||
# |
||||
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; |
||||
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; |
||||
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; |
||||
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); |
||||
# 14: Link (master); 15: separate register |
||||
|
||||
option device rtl8366s |
||||
option port 1 |
||||
option led 6 |
||||
|
||||
config switch_port |
||||
# Port 2 controls the ORANGE configuration of LEDs for |
||||
# the switch and the section does not correspond to a real |
||||
# switch port. |
||||
# |
||||
# See the key above for switch port 1 for the meaning of the |
||||
# 'led' setting below. |
||||
|
||||
option device rtl8366s |
||||
option port 2 |
||||
option led 9 |
||||
|
||||
config switch_port |
||||
# Port 5 controls the configuration of the WAN LED and the |
||||
# section does not correspond to a real switch port. |
||||
# |
||||
# To toggle the use of green or orange LEDs for the WAN port, |
||||
# see the LED setting for wndr3700:green:wan in /etc/config/system. |
||||
# |
||||
# See the key above for switch port 1 for the meaning of the |
||||
# 'led' setting below. |
||||
|
||||
option device rtl8366s |
||||
option port 5 |
||||
option led 2 |
@ -1,20 +0,0 @@ |
||||
#!/bin/sh /etc/rc.common |
||||
# |
||||
# Copyright (C) 2009 OpenWrt.org |
||||
# |
||||
|
||||
START=05 |
||||
|
||||
start() { |
||||
. /lib/ar71xx.sh |
||||
|
||||
local board=$(ar71xx_board_name) |
||||
|
||||
[ ! -d /etc/defconfig/$board ] && return 0 |
||||
|
||||
for f in $( ls /etc/defconfig/$board ); do |
||||
if [ ! -e /etc/config/$f ]; then |
||||
cp /etc/defconfig/$board/$f /etc/config/ |
||||
fi |
||||
done |
||||
} |
Loading…
Reference in new issue