lantiq: board.d: use auto xfer_mode as default

If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
master
Martin Schiller 7 years ago committed by Mathias Kresin
parent 2da6c85c80
commit c8904e9c04
  1. 4
      target/linux/lantiq/base-files/etc/board.d/02_network

@ -12,6 +12,8 @@ board_config_update
vpi=1
vci=32
annex="a"
tone="av"
xfer_mode=""
encaps="llc"
payload="bridged"
lan_mac=""
@ -198,7 +200,7 @@ ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
if lantiq_is_vdsl_system; then
interface_wan="ptm0"
ucidef_add_vdsl_modem "$annex" "av" "ptm"
ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
else
interface_wan="nas0"
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"

Loading…
Cancel
Save