hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

upgrade avr32 to 2.6.30-rc7

Browse Source 
SVN-Revision: 16291
master
Imre Kaloz 16 years ago
parent da4c5263ee
commit c5d88f6551
3 changed files with 246 additions and 14 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 2
      target/linux/avr32/Makefile
  2. 29
      target/linux/avr32/config-default
  3. 229
      target/linux/avr32/patches/000-revert_usart_pin_selection.patch

2
target/linux/avr32/Makefile
Unescape View File

@ -10,7 +10,7 @@ ARCH:=avr32
BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
LINUX_VERSION:=2.6.28.10
LINUX_VERSION:=2.6.30-rc7
include $(INCLUDE_DIR)/target.mk

29
target/linux/avr32/config-default
Unescape View File

@ -9,19 +9,22 @@ CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_AT32AP700X_WDT=m
# CONFIG_ATMEL_PWM is not set
# CONFIG_ATMEL_SSC is not set
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCLIB=y
CONFIG_AVR32=y
CONFIG_BASE_SMALL=0
CONFIG_BITREVERSE=y
CONFIG_BOARD_ATNGW100=y
# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
CONFIG_BOARD_ATNGW100=y
# CONFIG_BOARD_ATSTK1000 is not set
# CONFIG_BOARD_FAVR_32 is not set
# CONFIG_BOARD_HAMMERHEAD is not set
# CONFIG_BOARD_MERISC is not set
# CONFIG_BOARD_MIMC200 is not set
CONFIG_CLASSIC_RCU=y
CONFIG_CPU_AT32AP7000=y
@ -34,8 +37,8 @@ CONFIG_DW_DMAC=y
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_GPIO=y
CONFIG_GPIOLIB=y
CONFIG_HARDIRQS_SW_RESEND=y
@ -48,35 +51,35 @@ CONFIG_HAVE_CLK=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C=m
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LEDS_GPIO=y
CONFIG_LOADER_U_BOOT=y
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_LOADER_U_BOOT=y
CONFIG_MACB=y
CONFIG_MMC=m
CONFIG_MMC_ATMELMCI=m
# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_ATMELMCI=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_START=0x80000000
CONFIG_MTD_PHYSMAP=y
# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
CONFIG_NF_CT_ACCT=y
# CONFIG_NET_DMA is not set
CONFIG_NF_CT_ACCT=y
# CONFIG_NMI_DEBUGGING is not set
CONFIG_NO_HZ=y
CONFIG_NR_QUICK=2
@ -93,16 +96,16 @@ CONFIG_SCHED_HRTICK=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SDIO_UART is not set
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SPI=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SPI_ATMEL=y
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_TICK_ONESHOT=y
# CONFIG_VGASTATE is not set

229
target/linux/avr32/patches/000-revert_usart_pin_selection.patch
Unescape View File

@ -0,0 +1,229 @@
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -118,7 +118,7 @@ static void __init set_hw_addr(struct pl
void __init setup_board(void)
{
- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -252,12 +252,12 @@ static void __init atstk1002_setup_extda
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -115,12 +115,12 @@ static void __init atstk1003_setup_extda
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -120,12 +120,12 @@ static void __init atstk1004_setup_extda
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -250,7 +250,7 @@ static void __init favr32_setup_atmel_pw
void __init setup_board(void)
{
- at32_map_usart(3, 0, 0); /* USART 3 => /dev/ttyS0 */
+ at32_map_usart(3, 0); /* USART 3 => /dev/ttyS0 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -165,7 +165,7 @@ static void __init set_hw_addr(struct pl
void __init setup_board(void)
{
- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -231,9 +231,9 @@ static void detect_merisc_board_id(void)
void __init setup_board(void)
{
- at32_map_usart(0, 0, 0);
- at32_map_usart(1, 1, 0);
- at32_map_usart(3, 3, 0);
+ at32_map_usart(0, 0);
+ at32_map_usart(1, 1);
+ at32_map_usart(3, 3);
at32_setup_serial_console(1);
}
@@ -248,7 +248,7 @@ static int __init merisc_init(void)
at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26));
if (merisc_board_id >= 1)
- at32_map_usart(2, 2, 0);
+ at32_map_usart(2, 2);
at32_add_device_usart(0);
at32_add_device_usart(1);
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -175,10 +175,10 @@ static void __init set_hw_addr(struct pl
void __init setup_board(void)
{
- at32_map_usart(0, 0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
- at32_map_usart(1, 1, 0); /* USART 1: /dev/ttyS1 (RS232) */
- at32_map_usart(2, 2, 0); /* USART 2: /dev/ttyS2 (RS485) */
- at32_map_usart(3, 3, 0); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
+ at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
+ at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */
+ at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */
+ at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
}
static struct i2c_gpio_platform_data i2c_gpio_data = {
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -966,68 +966,56 @@ static struct resource atmel_usart3_reso
DEFINE_DEV_DATA(atmel_usart, 3);
DEV_CLK(usart, atmel_usart3, pba, 6);
-static inline void configure_usart0_pins(int flags)
+static inline void configure_usart0_pins(void)
{
u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 6);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 7);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 10);
select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
-static inline void configure_usart1_pins(int flags)
+static inline void configure_usart1_pins(void)
{
u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 19);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 20);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 16);
select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
}
-static inline void configure_usart2_pins(int flags)
+static inline void configure_usart2_pins(void)
{
u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 30);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 29);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 28);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
-static inline void configure_usart3_pins(int flags)
+static inline void configure_usart3_pins(void)
{
u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 16);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 15);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 19);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static struct platform_device *__initdata at32_usarts[4];
-void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
{
struct platform_device *pdev;
switch (hw_id) {
case 0:
pdev = &atmel_usart0_device;
- configure_usart0_pins(flags);
+ configure_usart0_pins();
break;
case 1:
pdev = &atmel_usart1_device;
- configure_usart1_pins(flags);
+ configure_usart1_pins();
break;
case 2:
pdev = &atmel_usart2_device;
- configure_usart2_pins(flags);
+ configure_usart2_pins();
break;
case 3:
pdev = &atmel_usart3_device;
- configure_usart3_pins(flags);
+ configure_usart3_pins();
break;
default:
return;
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -26,17 +26,12 @@ static inline void __deprecated at32_add
#define ATMEL_MAX_UART 4
extern struct platform_device *atmel_default_console_device;
-/* Flags for selecting USART extra pins */
-#define ATMEL_USART_RTS 0x01
-#define ATMEL_USART_CTS 0x02
-#define ATMEL_USART_CLK 0x03
-
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virtual base address, if any */
};
-void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
+void at32_map_usart(unsigned int hw_id, unsigned int line);
struct platform_device *at32_add_device_usart(unsigned int id);
struct eth_platform_data {
Write Preview
Loading…
Cancel
Save