ramips: DTS: VoCore2 improvements/fixes

The VoCore2 features 128MB of RAM, therefore set
memory in DTS to 128*1024*1024 = 0x8000000
The board's LED is connected to GND, set it to
ACTIVE_HIGH here.
Make serial console working again on kernel 4.9 by
change of pinmux configuration.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
master
Paul Wassi 7 years ago committed by Mathias Kresin
parent f683385e73
commit c51c976db8
  1. 25
      target/linux/ramips/dts/VOCORE2.dts

@ -15,7 +15,7 @@
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
reg = <0x0 0x8000000>;
};
gpio-leds {
@ -23,7 +23,7 @@
status {
label = "vocore2:fuchsia:status";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
};
};
@ -31,28 +31,9 @@
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "refclk", "gpio";
ralink,group = "wled_an", "perst", "wdt";
ralink,function = "gpio";
};
agpio {
ralink,group = "agpio";
ralink,function = "uart2";
};
};
uart1_pins: uart1 {
uart1 {
ralink,group = "uart1";
ralink,function = "uart1";
};
};
uart2_pins: uart2 {
uart2 {
ralink,group = "spis";
ralink,function = "pwm";
};
};
};

Loading…
Cancel
Save