There are only artifacts for these boards in our tree and not even partial support. Drop teh stale files. Signed-off-by: Mathias Kresin <dev@kresin.me>master
parent
0cf7c54023
commit
c3d9fe96dc
Binary file not shown.
Binary file not shown.
@ -1,135 +0,0 @@ |
||||
/* Copyright (c) 2015, The Linux Foundation. All rights reserved. |
||||
* |
||||
* Permission to use, copy, modify, and/or distribute this software for any |
||||
* purpose with or without fee is hereby granted, provided that the above |
||||
* copyright notice and this permission notice appear in all copies. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
||||
* |
||||
*/ |
||||
|
||||
#include "qcom-ipq4019-ap.dk01.1.dtsi" |
||||
#include "qcom-ipq4019-bus.dtsi" |
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
model = "ZyXEL NBG6617"; |
||||
compatible = "zyxel,nbg6617", "qcom,ipq4019"; |
||||
|
||||
memory { |
||||
device_type = "memory"; |
||||
reg = <0x80000000 0x10000000>; |
||||
}; |
||||
|
||||
aliases { |
||||
led-boot = &power; |
||||
led-failsafe = &power; |
||||
led-running = &power; |
||||
led-upgrade = &power; |
||||
}; |
||||
|
||||
reserved-memory { |
||||
#address-cells = <0x1>; |
||||
#size-cells = <0x1>; |
||||
ranges; |
||||
|
||||
rsvd1@87000000 { |
||||
reg = <0x87000000 0x0500000>; |
||||
no-map; |
||||
}; |
||||
|
||||
wifi_dump@87500000 { |
||||
reg = <0x87500000 0x600000>; |
||||
no-map; |
||||
}; |
||||
|
||||
rsvd2@87B00000 { |
||||
reg = <0x87b00000 0x500000>; |
||||
no-map; |
||||
}; |
||||
}; |
||||
|
||||
soc { |
||||
pinctrl@1000000 { |
||||
led_pinmux { |
||||
mux { |
||||
pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58"; |
||||
drive-strength = <0x8>; |
||||
bias-pull-up; |
||||
output-high; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
gpio-keys { |
||||
compatible = "gpio-keys"; |
||||
|
||||
wlan { |
||||
label = "wlan"; |
||||
gpios = <&tlmm 0x2 GPIO_ACTIVE_HIGH>; |
||||
linux,code = <KEY_RFKILL>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "wps"; |
||||
gpios = <&tlmm 0x3f GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
}; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&tlmm 0x4 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
power: power { |
||||
label = "nbg6617:green:power"; |
||||
gpios = <&tlmm 0x3 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "nbg6617:green:wps"; |
||||
gpios = <&tlmm 0x1 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
wlan2G { |
||||
label = "nbg6617:green:wlan2G"; |
||||
gpios = <&tlmm 0x3a GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
wlan5G { |
||||
label = "nbg6617:green:wlan5G"; |
||||
gpios = <&tlmm 0x5 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&spi_0 { /* BLSP1 QUP1 */ |
||||
n25q128a11@0 { |
||||
status = "okay"; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition0@0 { |
||||
label = "all"; |
||||
reg = <0x00000000 0x08000000>; |
||||
read-only; /* for now */ |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
@ -1,197 +0,0 @@ |
||||
/* Copyright (c) 2015, The Linux Foundation. All rights reserved. |
||||
* |
||||
* Permission to use, copy, modify, and/or distribute this software for any |
||||
* purpose with or without fee is hereby granted, provided that the above |
||||
* copyright notice and this permission notice appear in all copies. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
||||
* |
||||
*/ |
||||
|
||||
#include "qcom-ipq4019-ap.dk01.1.dtsi" |
||||
#include "qcom-ipq4019-bus.dtsi" |
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
model = "ASUS RT-AC58U"; |
||||
compatible = "asus,rt-ac58u", "qcom,ipq4019"; |
||||
|
||||
memory { |
||||
device_type = "memory"; |
||||
reg = <0x80000000 0x8000000>; |
||||
}; |
||||
|
||||
aliases { |
||||
led-boot = &power; |
||||
led-failsafe = &power; |
||||
led-running = &power; |
||||
led-upgrade = &power; |
||||
}; |
||||
|
||||
reserved-memory { |
||||
#address-cells = <0x1>; |
||||
#size-cells = <0x1>; |
||||
ranges; |
||||
|
||||
rsvd1@87E00000 { |
||||
reg = <0x87e00000 0x200000>; |
||||
no-map; |
||||
}; |
||||
}; |
||||
|
||||
gpio-keys { |
||||
compatible = "gpio-keys"; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "wps"; |
||||
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
power: status { |
||||
label = "rt-ac58u:blue:status"; |
||||
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
wan { |
||||
label = "rt-ac58u:blue:wan"; |
||||
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
wlan2G { |
||||
label = "rt-ac58u:blue:wlan2G"; |
||||
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
wan5G { |
||||
label = "rt-ac58u:blue:wlan5G"; |
||||
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
usb { |
||||
label = "rt-ac58u:blue:usb"; |
||||
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
lan { |
||||
label = "rt-ac58u:blue:lan"; |
||||
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&spi_0_pins { |
||||
pinmux_cs { |
||||
function = "gpio"; |
||||
pins = "gpio54", "gpio59"; |
||||
}; |
||||
pinconf_cs { |
||||
pins = "gpio54", "gpio59"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
output-high; |
||||
}; |
||||
}; |
||||
|
||||
&spi_0 { /* BLSP1 QUP1 */ |
||||
cs-gpios = <&tlmm 54 0>, |
||||
<&tlmm 59 0>; |
||||
|
||||
m25p80@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
/* |
||||
* U-boot looks for "n25q128a11" node, |
||||
* if we don't have it, it will spit out the following warning: |
||||
* "ipq: fdt fixup unable to find compatible node". |
||||
*/ |
||||
compatible = "mx25l1606e", "n25q128a11"; |
||||
reg = <0>; |
||||
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; |
||||
spi-max-frequency = <24000000>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition0@0 { |
||||
label = "SBL1"; |
||||
reg = <0x00000000 0x00040000>; |
||||
read-only; |
||||
}; |
||||
partition1@40000 { |
||||
label = "MIBIB"; |
||||
reg = <0x00040000 0x00020000>; |
||||
read-only; |
||||
}; |
||||
partition2@60000 { |
||||
label = "QSEE"; |
||||
reg = <0x00060000 0x00060000>; |
||||
read-only; |
||||
}; |
||||
partition3@c0000 { |
||||
label = "CDT"; |
||||
reg = <0x000c0000 0x00010000>; |
||||
read-only; |
||||
}; |
||||
partition4@d0000 { |
||||
label = "DDRPARAMS"; |
||||
reg = <0x000d0000 0x00010000>; |
||||
read-only; |
||||
}; |
||||
partition5@e0000 { |
||||
label = "APPSBLENV"; /* uboot env*/ |
||||
reg = <0x000e0000 0x00010000>; |
||||
read-only; |
||||
}; |
||||
partition5@f0000 { |
||||
label = "APPSBL"; /* uboot */ |
||||
reg = <0x000f0000 0x00080000>; |
||||
read-only; |
||||
}; |
||||
partition5@170000 { |
||||
label = "ART"; |
||||
reg = <0x00170000 0x00010000>; |
||||
read-only; |
||||
}; |
||||
/* 0x00180000 - 0x00200000 unused */ |
||||
}; |
||||
}; |
||||
|
||||
mt29f@1 { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
compatible = "spinand,mt29f", "w25n01gv"; |
||||
reg = <1>; |
||||
spi-max-frequency = <24000000>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition0@0 { |
||||
label = "ubi"; |
||||
reg = <0x00000000 0x08000000>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
@ -1,29 +0,0 @@ |
||||
From b8f3a7ccbeca5bdbd1b6210b94b38d3fef2dd0bd Mon Sep 17 00:00:00 2001
|
||||
From: Christian Lamparter <chunkeey@googlemail.com>
|
||||
Date: Thu, 19 Jan 2017 01:57:22 +0100
|
||||
Subject: [PATCH 16/38] mtd: ubi: add auto_attach HACK for the ASUS RT-AC58U
|
||||
|
||||
This patch adds a hack that allows UBI's autoattach feature
|
||||
to work with the custom ASUS UBI_DEV partition name.
|
||||
|
||||
This is necessary because the vendor's u-boot doesn't leave
|
||||
the bootargs / cmdline alone, so the it can't be overwritten
|
||||
easily otherwise.
|
||||
|
||||
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
|
||||
---
|
||||
drivers/mtd/ubi/build.c | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
|
||||
--- a/drivers/mtd/ubi/build.c
|
||||
+++ b/drivers/mtd/ubi/build.c
|
||||
@@ -1225,6 +1225,9 @@ static void __init ubi_auto_attach(void)
|
||||
mtd = open_mtd_device("ubi");
|
||||
if (IS_ERR(mtd))
|
||||
mtd = open_mtd_device("data");
|
||||
+ /* Hack for the Asus RT-AC58U */
|
||||
+ if (IS_ERR(mtd))
|
||||
+ mtd = open_mtd_device("UBI_DEV");
|
||||
|
||||
if (!IS_ERR(mtd)) {
|
||||
size_t len;
|
Loading…
Reference in new issue