Signed-off-by: Alexis Green <alexis@cessp.it> [Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
parent
d7e040f8bc
commit
c34f953fef
@ -0,0 +1,350 @@ |
||||
#include "qcom-ipq8064-v1.0.dtsi" |
||||
|
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
model = "Netgear Nighthawk X4 R7500v2"; |
||||
compatible = "netgear,r7500v2", "qcom,ipq8064"; |
||||
|
||||
memory@0 { |
||||
reg = <0x42000000 0xe000000>; |
||||
device_type = "memory"; |
||||
}; |
||||
|
||||
reserved-memory { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
ranges; |
||||
rsvd@41200000 { |
||||
reg = <0x41200000 0x300000>; |
||||
no-map; |
||||
}; |
||||
}; |
||||
|
||||
aliases { |
||||
serial0 = &uart4; |
||||
mdio-gpio0 = &mdio0; |
||||
}; |
||||
|
||||
chosen { |
||||
bootargs = "rootfstype=squashfs noinitrd"; |
||||
linux,stdout-path = "serial0:115200n8"; |
||||
}; |
||||
|
||||
soc { |
||||
pinmux@800000 { |
||||
i2c4_pins: i2c4_pinmux { |
||||
pins = "gpio12", "gpio13"; |
||||
function = "gsbi4"; |
||||
bias-disable; |
||||
}; |
||||
|
||||
nand_pins: nand_pins { |
||||
mux { |
||||
pins = "gpio34", "gpio35", "gpio36", |
||||
"gpio37", "gpio38", "gpio39", |
||||
"gpio40", "gpio41", "gpio42", |
||||
"gpio43", "gpio44", "gpio45", |
||||
"gpio46", "gpio47"; |
||||
function = "nand"; |
||||
drive-strength = <10>; |
||||
bias-disable; |
||||
}; |
||||
pullups { |
||||
pins = "gpio39"; |
||||
bias-pull-up; |
||||
}; |
||||
hold { |
||||
pins = "gpio40", "gpio41", "gpio42", |
||||
"gpio43", "gpio44", "gpio45", |
||||
"gpio46", "gpio47"; |
||||
bias-bus-hold; |
||||
}; |
||||
}; |
||||
|
||||
mdio0_pins: mdio0_pins { |
||||
mux { |
||||
pins = "gpio0", "gpio1"; |
||||
function = "gpio"; |
||||
drive-strength = <8>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
|
||||
rgmii2_pins: rgmii2_pins { |
||||
mux { |
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", |
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; |
||||
function = "rgmii2"; |
||||
drive-strength = <8>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
gsbi@16300000 { |
||||
qcom,mode = <GSBI_PROT_I2C_UART>; |
||||
status = "ok"; |
||||
serial@16340000 { |
||||
status = "ok"; |
||||
}; |
||||
/* |
||||
* The i2c device on gsbi4 should not be enabled. |
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive |
||||
* RPM usage. Turning this on in kernel manifests as |
||||
* i2c failure for the RPM. |
||||
*/ |
||||
}; |
||||
|
||||
sata-phy@1b400000 { |
||||
status = "ok"; |
||||
}; |
||||
|
||||
sata@29000000 { |
||||
status = "ok"; |
||||
}; |
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */ |
||||
status = "ok"; |
||||
}; |
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */ |
||||
status = "ok"; |
||||
}; |
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */ |
||||
status = "ok"; |
||||
}; |
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */ |
||||
status = "ok"; |
||||
}; |
||||
|
||||
usb30@0 { |
||||
status = "ok"; |
||||
}; |
||||
|
||||
usb30@1 { |
||||
status = "ok"; |
||||
}; |
||||
|
||||
pcie0: pci@1b500000 { |
||||
status = "ok"; |
||||
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; |
||||
pinctrl-0 = <&pcie0_pins>; |
||||
pinctrl-names = "default"; |
||||
}; |
||||
|
||||
pcie1: pci@1b700000 { |
||||
status = "ok"; |
||||
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; |
||||
pinctrl-0 = <&pcie1_pins>; |
||||
pinctrl-names = "default"; |
||||
}; |
||||
|
||||
nand@1ac00000 { |
||||
status = "ok"; |
||||
|
||||
pinctrl-0 = <&nand_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
nand-ecc-strength = <4>; |
||||
nand-bus-width = <8>; |
||||
|
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
qcadata@0 { |
||||
label = "qcadata"; |
||||
reg = <0x0000000 0x0c80000>; |
||||
read-only; |
||||
}; |
||||
|
||||
APPSBL@c80000 { |
||||
label = "APPSBL"; |
||||
reg = <0x0c80000 0x0500000>; |
||||
read-only; |
||||
}; |
||||
|
||||
APPSBLENV@1180000 { |
||||
label = "APPSBLENV"; |
||||
reg = <0x1180000 0x0080000>; |
||||
read-only; |
||||
}; |
||||
|
||||
art: art@1200000 { |
||||
label = "art"; |
||||
reg = <0x1200000 0x0140000>; |
||||
read-only; |
||||
}; |
||||
|
||||
artbak: art@1340000 { |
||||
label = "artbak"; |
||||
reg = <0x1340000 0x0140000>; |
||||
read-only; |
||||
}; |
||||
|
||||
kernel@1480000 { |
||||
label = "kernel"; |
||||
reg = <0x1480000 0x0200000>; |
||||
}; |
||||
|
||||
ubi@1680000 { |
||||
label = "ubi"; |
||||
reg = <0x1680000 0x1E00000>; |
||||
}; |
||||
|
||||
netgear@3480000 { |
||||
label = "netgear"; |
||||
reg = <0x3480000 0x4480000>; |
||||
read-only; |
||||
}; |
||||
|
||||
reserve@7900000 { |
||||
label = "reserve"; |
||||
reg = <0x7900000 0x0700000>; |
||||
read-only; |
||||
}; |
||||
|
||||
firmware@1480000 { |
||||
label = "firmware"; |
||||
reg = <0x1480000 0x2000000>; |
||||
}; |
||||
|
||||
}; |
||||
|
||||
mdio0: mdio { |
||||
compatible = "virtual,mdio-gpio"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; |
||||
pinctrl-0 = <&mdio0_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
phy0: ethernet-phy@0 { |
||||
device_type = "ethernet-phy"; |
||||
reg = <0>; |
||||
qca,ar8327-initvals = < |
||||
0x00004 0x7600000 /* PAD0_MODE */ |
||||
0x00008 0x1000000 /* PAD5_MODE */ |
||||
0x0000c 0x80 /* PAD6_MODE */ |
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */ |
||||
0x000e0 0xc74164de /* SGMII_CTRL */ |
||||
0x0007c 0x4e /* PORT0_STATUS */ |
||||
0x00094 0x4e /* PORT6_STATUS */ |
||||
>; |
||||
}; |
||||
|
||||
phy4: ethernet-phy@4 { |
||||
device_type = "ethernet-phy"; |
||||
reg = <4>; |
||||
}; |
||||
}; |
||||
|
||||
gmac1: ethernet@37200000 { |
||||
status = "ok"; |
||||
phy-mode = "rgmii"; |
||||
qcom,id = <1>; |
||||
|
||||
pinctrl-0 = <&rgmii2_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
mtd-mac-address = <&art 6>; |
||||
|
||||
fixed-link { |
||||
speed = <1000>; |
||||
full-duplex; |
||||
}; |
||||
}; |
||||
|
||||
gmac2: ethernet@37400000 { |
||||
status = "ok"; |
||||
phy-mode = "sgmii"; |
||||
qcom,id = <2>; |
||||
|
||||
mtd-mac-address = <&art 0>; |
||||
|
||||
fixed-link { |
||||
speed = <1000>; |
||||
full-duplex; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
gpio-keys { |
||||
compatible = "gpio-keys"; |
||||
|
||||
wifi { |
||||
label = "wifi"; |
||||
gpios = <&qcom_pinmux 6 1>; |
||||
linux,code = <KEY_WLAN>; |
||||
}; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&qcom_pinmux 54 1>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "wps"; |
||||
gpios = <&qcom_pinmux 65 1>; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
usb1 { |
||||
label = "r7500v2:amber:usb1"; |
||||
gpios = <&qcom_pinmux 7 0>; |
||||
}; |
||||
|
||||
usb3 { |
||||
label = "r7500v2:amber:usb3"; |
||||
gpios = <&qcom_pinmux 8 0>; |
||||
}; |
||||
|
||||
status { |
||||
label = "r7500v2:amber:status"; |
||||
gpios = <&qcom_pinmux 9 0>; |
||||
}; |
||||
|
||||
internet { |
||||
label = "r7500v2:white:internet"; |
||||
gpios = <&qcom_pinmux 22 0>; |
||||
}; |
||||
|
||||
wan { |
||||
label = "r7500v2:white:wan"; |
||||
gpios = <&qcom_pinmux 23 0>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "r7500v2:white:wps"; |
||||
gpios = <&qcom_pinmux 24 0>; |
||||
}; |
||||
|
||||
esata { |
||||
label = "r7500v2:white:esata"; |
||||
gpios = <&qcom_pinmux 26 0>; |
||||
}; |
||||
|
||||
power { |
||||
label = "r7500v2:white:power"; |
||||
gpios = <&qcom_pinmux 53 0>; |
||||
default-state = "on"; |
||||
}; |
||||
|
||||
rfkill { |
||||
label = "r7500v2:white:rfkill"; |
||||
gpios = <&qcom_pinmux 64 0>; |
||||
}; |
||||
|
||||
}; |
||||
}; |
||||
|
||||
&adm_dma { |
||||
status = "ok"; |
||||
}; |
@ -0,0 +1,10 @@ |
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -511,6 +511,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-ipq8064-db149.dtb \
|
||||
qcom-ipq8064-ea8500.dtb \
|
||||
qcom-ipq8064-r7500.dtb \
|
||||
+ qcom-ipq8064-r7500v2.dtb \
|
||||
qcom-ipq8064-r7800.dtb \
|
||||
qcom-msm8660-surf.dtb \
|
||||
qcom-msm8960-cdp.dtb \
|
Loading…
Reference in new issue