add profile for the Edimax 3g-6200NL board

http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172
master
John Crispin 12 years ago
parent f3643374c4
commit c1710901c5
  1. 1
      target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
  2. 3
      target/linux/ramips/base-files/etc/uci-defaults/01_leds
  3. 1
      target/linux/ramips/base-files/etc/uci-defaults/02_network
  4. 1
      target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
  5. 3
      target/linux/ramips/base-files/lib/ramips.sh
  6. 1
      target/linux/ramips/base-files/lib/upgrade/platform.sh
  7. 78
      target/linux/ramips/dts/3G-6200NL.dts
  8. 5
      target/linux/ramips/image/Makefile

@ -52,6 +52,7 @@ case "$FIRMWARE" in
;;
3g-6200n | \
3g-6200nl | \
3g300m | \
air3gii | \
all0239-3g | \

@ -18,6 +18,9 @@ case $board in
set_wifi_led "edimax:amber:wlan"
set_usb_led "edimax:blue:3g"
;;
3g-6200nl)
set_wifi_led "edimax:green:wlan"
;;
3g300m)
set_usb_led "tenda:blue:3g"
;;

@ -46,6 +46,7 @@ ramips_setup_interfaces()
;;
dir-615-h1 | \
3g-6200nl | \
wl-330n)
ucidef_set_interface_lan "eth0.1"
;;

@ -10,6 +10,7 @@ preinit_set_mac_address() {
case $(ramips_board_name) in
3g-6200n |\
3g-6200nl |\
3g300m | \
mzk-w300nh2 |\
wl-330n |\

@ -33,6 +33,9 @@ ramips_board_detect() {
*"Edimax 3g-6200n")
name="3g-6200n"
;;
*"Edimax 3g-6200nl")
name="3g-6200nl"
;;
*"AirLive Air3GII")
name="air3gii"
;;

@ -15,6 +15,7 @@ platform_check_image() {
case "$board" in
3g-6200n | \
3g-6200nl | \
3g300m | \
air3gii | \
all0239-3g | \

@ -0,0 +1,78 @@
/dts-v1/;
/include/ "rt3050.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "3G-6200N", "ralink,rt3050-soc";
model = "Edimax 3g-6200n";
memorydetect {
ralink,memory = <0x0 0x200000 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)";
};
palmbus@10000000 {
sysc@0 {
ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x2f>;
};
gpio-leds {
compatible = "gpio-leds";
wlan {
label = "edimax:amber:wlan";
gpios = <&gpio0 14 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&gpio0 12 1>;
linux,code = <0x211>;
};
};
wmac@10180000 {
status = "okay";
};
otg@101c0000 {
status = "okay";
};
};

@ -238,7 +238,9 @@ endif
#
edimax_3g6200n_mtd_size=3735552
Image/Build/Profile/3G6200N=$(call BuildFirmware/CustomFlash/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size))
Image/Build/Profile/3G6200N=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
Image/Build/Profile/3G6200NL=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200nl,3G-6200NL,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
Image/Build/Profile/3G300M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI Kernel Image,factory)
@ -397,6 +399,7 @@ Image/Build/Profile/XDXRN502J=$(call BuildFirmware/Default4M/$(1),$(1),xdxrn502j
ifeq ($(SUBTARGET),rt305x)
define Image/Build/Profile/Default
$(call Image/Build/Profile/3G6200N,$(1))
$(call Image/Build/Profile/3G6200NL,$(1))
$(call Image/Build/Profile/3G300M,$(1))
$(call Image/Build/Profile/AIR3GII,$(1))
$(call Image/Build/Profile/ALL02393G,$(1))

Loading…
Cancel
Save