ramips: move status led unset to devicetree

Release the led used for boot status indication via devicetree instead
of setting a default off trigger in userspace.

Signed-off-by: Mathias Kresin <dev@kresin.me>
master
Mathias Kresin 6 years ago
parent 8f4dfadd5a
commit c074239c79
  1. 11
      target/linux/ramips/base-files/etc/board.d/01_leds
  2. 2
      target/linux/ramips/dts/AC1200RM.dts
  3. 2
      target/linux/ramips/dts/CY-SWR1100.dts
  4. 2
      target/linux/ramips/dts/DWR-118-A2.dts
  5. 2
      target/linux/ramips/dts/DWR-921-C1.dts
  6. 2
      target/linux/ramips/dts/F5D8235_V1.dts
  7. 2
      target/linux/ramips/dts/WR1200JS.dts
  8. 2
      target/linux/ramips/dts/ZBT-CPE102.dts

@ -33,7 +33,6 @@ air3gii)
;;
alfa-network,ac1200rm)
set_wifi_led "$boardname:green:wlan2g" "wlan1"
ucidef_set_led_default "wps" "wps" "$boardname:green:wps" "0"
;;
alfa-network,awusfree1)
set_wifi_led "$boardname:blue:wlan"
@ -78,9 +77,6 @@ cf-wr800n)
ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
set_wifi_led "$boardname:white:wifi"
;;
cy-swr1100)
ucidef_set_led_default "wps" "WPS" "$boardname:blue:wps" "0"
;;
d240)
set_wifi_led "$boardname:blue:wifi"
;;
@ -117,12 +113,10 @@ dlink,dwr-118-a2)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
set_wifi_led "$boardname:green:wlan2g" "wlan1"
ucidef_set_led_default "internet" "internet" "$boardname:green:internet" "0"
;;
dlink,dwr-921-c1)
set_wifi_led "$boardname:green:wifi"
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
;;
dir-860l-b1)
ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
@ -139,7 +133,6 @@ ex3700)
ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
;;
f5d8235-v1)
ucidef_set_led_default "lan" "lan" "$boardname:blue:wired" "0"
set_wifi_led "$boardname:blue:wireless"
;;
fonera20n)
@ -407,16 +400,12 @@ y1s)
;;
youhua,wr1200js)
ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
ucidef_set_led_default "wps" "wps" "$boardname:blue:wps" "0"
;;
zbt-ape522ii)
ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
;;
zbt-cpe102)
ucidef_set_led_default "power" "power" "$boardname:green:4g-0" "0"
;;
zbt-wa05)
set_wifi_led "$boardname:blue:air"
;;

@ -44,8 +44,6 @@
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
};
chosen {

@ -12,8 +12,6 @@
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
};
nor-flash@1c000000 {

@ -12,8 +12,6 @@
aliases {
led-boot = &led_internet;
led-failsafe = &led_internet;
led-running = &led_internet;
led-upgrade = &led_internet;
};
gpio-keys-polled {

@ -12,8 +12,6 @@
aliases {
led-boot = &led_sstrenghg;
led-failsafe = &led_sstrenghg;
led-running = &led_sstrenghg;
led-upgrade = &led_sstrenghg;
};
gpio-keys-polled {

@ -14,8 +14,6 @@
aliases {
led-boot = &led_wired_blue;
led-failsafe = &led_wired_blue;
led-running = &led_wired_blue;
led-upgrade = &led_wired_blue;
};
cfi@1f000000 {

@ -12,8 +12,6 @@
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
};
memory@0 {

@ -17,8 +17,6 @@
aliases {
led-boot = &led_4g_0;
led-failsafe = &led_4g_0;
led-running = &led_4g_0;
led-upgrade = &led_4g_0;
};
gpio-leds {

Loading…
Cancel
Save