ramips: Add support for GL-MT300N

This patch adds support for GL-MT300N.
GL-MT300N is powered by MT7620N with 16MB flash, 64MB RAM,
2 LANs, USB, UART, GPIO and PoE support.

SVN-Revision: 48993
master
John Crispin 9 years ago
parent 96ee39b184
commit be53e5a154
  1. 3
      target/linux/ramips/base-files/etc/board.d/01_leds
  2. 1
      target/linux/ramips/base-files/etc/board.d/02_network
  3. 3
      target/linux/ramips/base-files/lib/ramips.sh
  4. 1
      target/linux/ramips/base-files/lib/upgrade/platform.sh
  5. 153
      target/linux/ramips/dts/GL-MT300N.dts
  6. 2
      target/linux/ramips/image/Makefile
  7. 11
      target/linux/ramips/mt7620/profiles/gli.mk

@ -137,7 +137,8 @@ fonera20n)
set_usb_led "$board:orange:usb"
set_wifi_led "$board:orange:wifi"
;;
gl-mt300a)
gl-mt300a|\
gl-mt300n)
set_wifi_led "$board:wlan"
;;
hc5661)

@ -114,6 +114,7 @@ ramips_setup_interfaces()
f5d8235-v1|\
f5d8235-v2|\
gl-mt300a|\
gl-mt300n|\
hg255d|\
mzk-wdpr|\
jhr-n805r|\

@ -178,6 +178,9 @@ ramips_board_detect() {
*"GL-MT300A")
name="gl-mt300a"
;;
*"GL-MT300N")
name="gl-mt300n"
;;
*"HC5661")
name="hc5661"
;;

@ -57,6 +57,7 @@ platform_check_image() {
fonera20n|\
freestation5|\
gl-mt300a|\
gl-mt300n|\
hc5*61|\
hg255d|\
hlk-rm04|\

@ -0,0 +1,153 @@
/dts-v1/;
/include/ "mt7620n.dtsi"
/ {
compatible = "GL-MT300N", "ralink,mt7620n-soc";
model = "GL-MT300N";
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
gpio1: gpio@638 {
status = "okay";
};
gpio2: gpio@660 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q128";
reg = <0 0>;
linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf80000>;
};
partition@ff0000 {
label = "art";
reg = <0xff0000 0x10000>;
};
};
};
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4000>;
ralink,port-map = "wllll";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pcie@10140000 {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wled","ephy","i2c";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
wan {
label = "gl-mt300n:wan";
gpios = <&gpio2 0 1>;
};
lan {
label = "gl-mt300n:lan";
gpios = <&gpio2 1 1>;
};
wlan {
label = "gl-mt300n:wlan";
gpios = <&gpio3 0 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
BTN_0 {
label = "BTN_0";
gpios = <&gpio2 2 1>;
linux,code = <0x100>;
};
BTN_1 {
label = "BTN_1";
gpios = <&gpio2 3 1>;
linux,code = <0x101>;
};
};
};

@ -994,6 +994,7 @@ Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WR
Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-mini,MIWIFI-MINI)
Image/Build/Profile/GL-MT300A=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300a,GL-MT300A)
Image/Build/Profile/GL-MT300N=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300n,GL-MT300N)
Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
@ -1038,6 +1039,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WT3020,$(1))
$(call Image/Build/Profile/MIWIFI-MINI,$(1))
$(call Image/Build/Profile/GL-MT300A,$(1))
$(call Image/Build/Profile/GL-MT300N,$(1))
$(call Image/Build/Profile/ZTE-Q7,$(1))
$(call Image/Build/Profile/YOUKU-YK1,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))

@ -14,3 +14,14 @@ define Profile/GL-MT300A/Description
Support for gl-mt300a Router
endef
$(eval $(call Profile,GL-MT300A))
define Profile/GL-MT300N
NAME:=GL-MT300N
PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci kmod-mt76
endef
define Profile/GL-MT300N/Description
Support for gl-mt300n Router
endef
$(eval $(call Profile,GL-MT300N))

Loading…
Cancel
Save