upgrade to 3.9-rc4, disable unsupported boards

SVN-Revision: 36128

target/linux/gemini/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2009-2011 OpenWrt.org
+# Copyright (C) 2009-2013 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -9,11 +9,11 @@ include $(TOPDIR)/rules.mk
 ARCH:=arm
 BOARD:=gemini
 BOARDNAME:=Cortina Systems CS351x
-FEATURES:=squashfs broken
+FEATURES:=squashfs pci
 CFLAGS:=-Os -pipe -march=armv4 -mtune=fa526 -fno-caller-saves
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.9-rc4
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/gemini/config-default

@@ -117,8 +117,8 @@ CONFIG_IP_PIMSM_V2=y
 CONFIG_KTIME_SCALAR=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_MACH_NAS4220B=y
-CONFIG_MACH_RUT100=y
+# CONFIG_MACH_NAS4220B is not set
+# CONFIG_MACH_RUT100 is not set
 CONFIG_MACH_WBD111=y
 CONFIG_MACH_WBD222=y
 CONFIG_MDIO_BITBANG=y
@@ -127,7 +127,7 @@ CONFIG_MDIO_GPIO=y
 CONFIG_MIGHT_HAVE_PCI=y
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NLS=m

target/linux/gemini/patches/000-ARM-gemini-get-platform-to-build-again.patch

@@ -41,7 +41,7 @@ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -386,6 +386,7 @@ config ARCH_GEMINI
+@@ -410,6 +410,7 @@ config ARCH_GEMINI
  	bool "Cortina Systems Gemini"
  	select ARCH_REQUIRE_GPIOLIB
  	select ARCH_USES_GETTIMEOFFSET
@@ -62,9 +62,9 @@ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
  obj-$(CONFIG_MACH_NAS4220B)	+= board-nas4220b.o
 --- a/arch/arm/mach-gemini/board-nas4220b.c
 +++ b/arch/arm/mach-gemini/board-nas4220b.c
-@@ -107,4 +107,5 @@ MACHINE_START(NAS4220B, "Raidsonic NAS I
+@@ -103,4 +103,5 @@ MACHINE_START(NAS4220B, "Raidsonic NAS I
  	.init_irq	= gemini_init_irq,
- 	.timer		= &ib4220b_timer,
+ 	.init_time	= gemini_timer_init,
  	.init_machine	= ib4220b_init,
 +	.restart	= gemini_restart,
  MACHINE_END
@@ -78,25 +78,25 @@ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
  
  #include <asm/mach-types.h>
  #include <asm/mach/arch.h>
-@@ -91,4 +92,5 @@ MACHINE_START(RUT100, "Teltonika RUT100"
+@@ -87,4 +88,5 @@ MACHINE_START(RUT100, "Teltonika RUT100"
  	.init_irq	= gemini_init_irq,
- 	.timer		= &rut1xx_timer,
+ 	.init_time	= gemini_timer_init,
  	.init_machine	= rut1xx_init,
 +	.restart	= gemini_restart,
  MACHINE_END
 --- a/arch/arm/mach-gemini/board-wbd111.c
 +++ b/arch/arm/mach-gemini/board-wbd111.c
-@@ -134,4 +134,5 @@ MACHINE_START(WBD111, "Wiliboard WBD-111
+@@ -130,4 +130,5 @@ MACHINE_START(WBD111, "Wiliboard WBD-111
  	.init_irq	= gemini_init_irq,
- 	.timer		= &wbd111_timer,
+ 	.init_time	= gemini_timer_init,
  	.init_machine	= wbd111_init,
 +	.restart	= gemini_restart,
  MACHINE_END
 --- a/arch/arm/mach-gemini/board-wbd222.c
 +++ b/arch/arm/mach-gemini/board-wbd222.c
-@@ -134,4 +134,5 @@ MACHINE_START(WBD222, "Wiliboard WBD-222
+@@ -130,4 +130,5 @@ MACHINE_START(WBD222, "Wiliboard WBD-222
  	.init_irq	= gemini_init_irq,
- 	.timer		= &wbd222_timer,
+ 	.init_time	= gemini_timer_init,
  	.init_machine	= wbd222_init,
 +	.restart	= gemini_restart,
  MACHINE_END

target/linux/gemini/patches/110-watchdog-add-gemini_wdt-driver.patch

@@ -381,7 +381,7 @@
 +MODULE_ALIAS("platform:gemini-wdt");
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -152,6 +152,16 @@ config 977_WATCHDOG
+@@ -154,6 +154,16 @@ config 977_WATCHDOG
  
  	  Not sure? It's safe to say N.
  

target/linux/gemini/patches/112-arm-gemini-register-watchdog-devices.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-gemini/board-nas4220b.c
 +++ b/arch/arm/mach-gemini/board-nas4220b.c
-@@ -99,6 +99,7 @@ static void __init ib4220b_init(void)
+@@ -95,6 +95,7 @@ static void __init ib4220b_init(void)
  	platform_device_register(&ib4220b_led_device);
  	platform_device_register(&ib4220b_key_device);
  	platform_register_rtc();
@@ -10,7 +10,7 @@
  MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
 --- a/arch/arm/mach-gemini/board-wbd111.c
 +++ b/arch/arm/mach-gemini/board-wbd111.c
-@@ -126,6 +126,7 @@ static void __init wbd111_init(void)
+@@ -122,6 +122,7 @@ static void __init wbd111_init(void)
  	platform_device_register(&wbd111_leds_device);
  	platform_device_register(&wbd111_keys_device);
  	platform_register_rtc();
@@ -20,7 +20,7 @@
  MACHINE_START(WBD111, "Wiliboard WBD-111")
 --- a/arch/arm/mach-gemini/board-wbd222.c
 +++ b/arch/arm/mach-gemini/board-wbd222.c
-@@ -126,6 +126,7 @@ static void __init wbd222_init(void)
+@@ -122,6 +122,7 @@ static void __init wbd222_init(void)
  	platform_device_register(&wbd222_leds_device);
  	platform_device_register(&wbd222_keys_device);
  	platform_register_rtc();
@@ -30,7 +30,7 @@
  MACHINE_START(WBD222, "Wiliboard WBD-222")
 --- a/arch/arm/mach-gemini/board-rut1xx.c
 +++ b/arch/arm/mach-gemini/board-rut1xx.c
-@@ -84,6 +84,7 @@ static void __init rut1xx_init(void)
+@@ -80,6 +80,7 @@ static void __init rut1xx_init(void)
  	platform_device_register(&rut1xx_leds);
  	platform_device_register(&rut1xx_keys_device);
  	platform_register_rtc();

target/linux/gemini/patches/120-net-add-gemini-gmac-driver.patch

@@ -1276,7 +1276,7 @@
 +	if (register_netdev(dev))
 +		return -1;
 +
-+	gmac->phydev = phy_connect(dev, pdata->bus_id[num], &gmac_get_phy_status, 0,
++	gmac->phydev = phy_connect(dev, pdata->bus_id[num], &gmac_get_phy_status,
 +				 pdata->interface[num]);
 +	if (IS_ERR(gmac->phydev))
 +		return PTR_ERR(gmac->phydev);

target/linux/gemini/patches/122-arm-gemini-wbd111-register-ethernet.patch

@@ -30,7 +30,7 @@
  static struct gpio_keys_button wbd111_keys[] = {
  	{
  		.code		= KEY_SETUP,
-@@ -127,6 +147,8 @@ static void __init wbd111_init(void)
+@@ -123,6 +143,8 @@ static void __init wbd111_init(void)
  	platform_device_register(&wbd111_keys_device);
  	platform_register_rtc();
  	platform_register_watchdog();

target/linux/gemini/patches/123-arm-gemini-wbd222-register-eth.patch

@@ -32,7 +32,7 @@
  static struct gpio_keys_button wbd222_keys[] = {
  	{
  		.code		= KEY_SETUP,
-@@ -127,6 +149,8 @@ static void __init wbd222_init(void)
+@@ -123,6 +145,8 @@ static void __init wbd222_init(void)
  	platform_device_register(&wbd222_keys_device);
  	platform_register_rtc();
  	platform_register_watchdog();

target/linux/gemini/patches/124-arm-gemini-rut100-register-ethernet.patch

@@ -36,7 +36,7 @@
  static struct gpio_keys_button rut1xx_keys[] = {
  	{
  		.code		= KEY_SETUP,
-@@ -85,6 +107,8 @@ static void __init rut1xx_init(void)
+@@ -81,6 +103,8 @@ static void __init rut1xx_init(void)
  	platform_device_register(&rut1xx_keys_device);
  	platform_register_rtc();
  	platform_register_watchdog();

target/linux/gemini/patches/130-usb-ehci-gemini-fot2gxx-support.patch

@@ -514,7 +514,7 @@
  
  	if (ehci->debug)
  		dbgp_external_startup(ehci_to_hcd(ehci));
-@@ -340,11 +346,14 @@ static void ehci_silence_controller(stru
+@@ -341,11 +347,14 @@ static void ehci_silence_controller(stru
  	ehci->rh_state = EHCI_RH_HALTED;
  	ehci_turn_off_all_ports(ehci);
  
@@ -529,7 +529,7 @@
  	spin_unlock_irq(&ehci->lock);
  }
  
-@@ -599,7 +608,9 @@ static int ehci_run (struct usb_hcd *hcd
+@@ -600,7 +609,9 @@ static int ehci_run (struct usb_hcd *hcd
  	// Philips, Intel, and maybe others need CMD_RUN before the
  	// root hub will detect new devices (why?); NEC doesn't
  	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
@@ -539,7 +539,7 @@
  	ehci_writel(ehci, ehci->command, &ehci->regs->command);
  	dbg_cmd (ehci, "init", ehci->command);
  
-@@ -619,9 +630,11 @@ static int ehci_run (struct usb_hcd *hcd
+@@ -620,9 +631,11 @@ static int ehci_run (struct usb_hcd *hcd
  	 */
  	down_write(&ehci_cf_port_reset_rwsem);
  	ehci->rh_state = EHCI_RH_RUNNING;
@@ -551,7 +551,7 @@
  	up_write(&ehci_cf_port_reset_rwsem);
  	ehci->last_periodic_enable = ktime_get_real();
  
-@@ -1242,6 +1255,11 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+@@ -1241,6 +1254,11 @@ MODULE_DESCRIPTION(DRIVER_DESC);
  MODULE_AUTHOR (DRIVER_AUTHOR);
  MODULE_LICENSE ("GPL");
  

target/linux/gemini/patches/132-arm-gemini-wbd111-register-usb.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-gemini/board-wbd111.c
 +++ b/arch/arm/mach-gemini/board-wbd111.c
-@@ -149,6 +149,7 @@ static void __init wbd111_init(void)
+@@ -145,6 +145,7 @@ static void __init wbd111_init(void)
  	platform_register_watchdog();
  	platform_device_register(&wbd111_phy_device);
  	platform_register_ethernet(&gmac_data);

target/linux/gemini/patches/133-arm-gemini-wbd222-register-usb.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-gemini/board-wbd222.c
 +++ b/arch/arm/mach-gemini/board-wbd222.c
-@@ -151,6 +151,7 @@ static void __init wbd222_init(void)
+@@ -147,6 +147,7 @@ static void __init wbd222_init(void)
  	platform_register_watchdog();
  	platform_device_register(&wbd222_phy_device);
  	platform_register_ethernet(&gmac_data);

target/linux/gemini/patches/134-arm-gemini-rut100-register-usb.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-gemini/board-rut1xx.c
 +++ b/arch/arm/mach-gemini/board-rut1xx.c
-@@ -109,6 +109,7 @@ static void __init rut1xx_init(void)
+@@ -105,6 +105,7 @@ static void __init rut1xx_init(void)
  	platform_register_watchdog();
  	platform_device_register(&rut1xx_phy_device);
  	platform_register_ethernet(&gmac_data);

target/linux/gemini/patches/135-arm-gemini-nas4220-register-usb.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-gemini/board-nas4220b.c
 +++ b/arch/arm/mach-gemini/board-nas4220b.c
-@@ -100,6 +100,8 @@ static void __init ib4220b_init(void)
+@@ -96,6 +96,8 @@ static void __init ib4220b_init(void)
  	platform_device_register(&ib4220b_key_device);
  	platform_register_rtc();
  	platform_register_watchdog();

target/linux/gemini/patches/140-arm-gemini-add-pci-support.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -388,6 +388,7 @@ config ARCH_GEMINI
+@@ -412,6 +412,7 @@ config ARCH_GEMINI
  	select ARCH_USES_GETTIMEOFFSET
  	select NEED_MACH_GPIO_H
  	select CPU_FA526