ramips: Add support for Microduino MicroWRT

MicroWRT is an wireless router with 2 USB,1 ethernet port. It
has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
combine with the core board. The detailed information, please refer to
https://www.microduino.cc/wiki/index.php?title=Main_Page

This patch adds support for it.
Because there is only one port,so disabled VLAN and use eth0 as lan
port. and only a power LED control by power pin.

Signed-off-by: 盛凯 <shengkai81@gmail.com>

SVN-Revision: 45331

target/linux/ramips/base-files/etc/board.d/02_network

@@ -45,6 +45,7 @@ ramips_setup_interfaces()
 
 	3g150b | \
 	3g300m | \
+	microwrt | \
 	w150m | \
 	zte-q7 | \
 	all0256n | \

target/linux/ramips/base-files/lib/ramips.sh

@@ -202,6 +202,9 @@ ramips_board_detect() {
 	*"Planex MZK-750DHP")
 		name="mzk-750dhp"
 		;;
+	*"Microduino MicroWRT")
+		name="microwrt"
+		;;
 	*"NBG-419N")
 		name="nbg-419n"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -60,6 +60,7 @@ platform_check_image() {
 	m2m | \
 	m3 | \
 	m4 | \
+	microwrt | \
 	mlw221 | \
 	mlwg2 | \
 	mofi3500-3gn | \

target/linux/ramips/dts/MicroWRT.dts

@@ -0,0 +1,107 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "microwrt", "ralink,mt7620a-soc";
+	model = "Microduino MicroWRT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	palmbus@10000000 {
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+
+		gpio3: gpio@688 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q128";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q128";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "u-boot-env";
+					reg = <0x20000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@30000 {
+					label = "factory";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				partition@40000 {
+					label = "firmware";
+					reg = <0x40000 0xfc0000>;
+				};
+			};
+		};
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+
+	ethernet@10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ephy_pins>;
+		mtd-mac-address = <&factory 0x4>;
+		ralink,port-map = "llllw";
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			default {
+				ralink,group = "wled", "i2c", "wdt", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x198>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x211>;
+		};
+	};
+   };

target/linux/ramips/image/Makefile

@@ -865,6 +865,8 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1)
 Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
 Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
 Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
+microwrt_mtd_size=16515072
+Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size))
 
 
 ifeq ($(SUBTARGET),mt7620)
@@ -895,6 +897,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/ZTE-Q7,$(1))
 	$(call Image/Build/Profile/ZBT-WA05,$(1))
 	$(call Image/Build/Profile/ArcherC20i,$(1))
+	$(call Image/Build/Profile/MicroWRT,$(1))
 endef
 endif
 

target/linux/ramips/mt7620/profiles/microwrt.mk

@@ -0,0 +1,9 @@
+define Profile/MicroWRT
+	NAME:=Microduino MicroWRT
+	PACKAGES:= kmod-usb-core kmod-usb2 kmod-usb-ohci
+endef
+
+define Profile/MicroWRT/Description
+		Package set compatible with MicroWRT
+endef
+$(eval $(call Profile,MicroWRT))