hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

add 74x164 SPI chip support

Browse Source 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23499
master
Florian Fainelli 14 years ago
parent cd9b90235c
commit b65e494976
1 changed files with 202 additions and 24 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 226
      target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch

226
target/linux/brcm63xx/patches-2.6.35/211-nxp-74hc164-gpio-chip-driver.patch → target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch
Unescape View File

@ -1,25 +1,27 @@
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -343,4 +343,12 @@ config GPIO_JANZ_TTL
This driver provides support for driving the pins in output
mode only. Input mode is not supported.
@@ -321,6 +321,14 @@ config GPIO_MC33880
SPI driver for Freescale MC33880 high-side/low-side switch.
This provides GPIO interface supporting inputs and outputs.
+comment "Other GPIO expanders"
+
+config GPIO_NXP_74HC164
+ tristate "NXP 74HC164 Output expanders"
+ help
+ Platform driver for NXP 74HC164 8-output Expanders. This
+ provides a GPIO interface supporting outputs.
+
endif
+config GPIO_74X164
+ tristate "74x164 serial-in/parallel-out 8-bits shift register"
+ depends on SPI_MASTER
+ help
+ Platform driver for 74x164 compatible serial-in/parallel-out
+ 8-outputs shift registers. This driver can be used to provide access
+ to more gpio outputs.
+
comment "AC97 GPIO expanders:"
config GPIO_UCB1400
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o
obj-$(CONFIG_GPIO_MAX732X) += max732x.o
obj-$(CONFIG_GPIO_MC33880) += mc33880.o
obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
+obj-$(CONFIG_GPIO_NXP_74HC164) += nxp_74hc164.o
+obj-$(CONFIG_GPIO_74X164) += 74x164.o
obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
obj-$(CONFIG_GPIO_PL061) += pl061.o
@ -253,27 +255,203 @@
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" NXP_74HC164_DRIVER_NAME);
--- /dev/null
+++ b/include/linux/nxp_74hc164.h
@@ -0,0 +1,22 @@
+++ b/drivers/gpio/74x164.c
@@ -0,0 +1,184 @@
+/*
+ * NXP 74HC164 - Dual 4-input multiplexer defines
+ * 74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _NXP_74HC164_H
+#define _NXP_74HC164_H
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/74x164.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#define GEN_74X164_GPIO_COUNT 8
+
+
+struct gen_74x164_chip {
+ struct spi_device *spi;
+ struct gpio_chip gpio_chip;
+ struct mutex lock;
+ u8 port_config;
+};
+
+static void gen_74x164_set_value(struct gpio_chip *, unsigned, int);
+
+static struct gen_74x164_chip *gpio_to_chip(struct gpio_chip *gc)
+{
+ return container_of(gc, struct gen_74x164_chip, gpio_chip);
+}
+
+static int __gen_74x164_write_config(struct gen_74x164_chip *chip)
+{
+ return spi_write(chip->spi,
+ &chip->port_config, sizeof(chip->port_config));
+}
+
+static int gen_74x164_direction_output(struct gpio_chip *gc,
+ unsigned offset, int val)
+{
+ gen_74x164_set_value(gc, offset, val);
+ return 0;
+}
+
+static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset)
+{
+ struct gen_74x164_chip *chip = gpio_to_chip(gc);
+ int ret;
+
+ mutex_lock(&chip->lock);
+ ret = (chip->port_config >> offset) & 0x1;
+ mutex_unlock(&chip->lock);
+
+ return ret;
+}
+
+static void gen_74x164_set_value(struct gpio_chip *gc,
+ unsigned offset, int val)
+{
+ struct gen_74x164_chip *chip = gpio_to_chip(gc);
+ bool refresh;
+
+ mutex_lock(&chip->lock);
+ if (val)
+ chip->port_config |= (1 << offset);
+ else
+ chip->port_config &= ~(1 << offset);
+
+ __gen_74x164_write_config(chip);
+ mutex_unlock(&chip->lock);
+}
+
+static int __devinit gen_74x164_probe(struct spi_device *spi)
+{
+ struct gen_74x164_chip *chip;
+ struct gen_74x164_chip_platform_data *pdata;
+ int ret;
+
+ pdata = spi->dev.platform_data;
+ if (!pdata || !pdata->base) {
+ dev_dbg(&spi->dev, "incorrect or missing platform data\n");
+ return -EINVAL;
+ }
+
+ /*
+ * bits_per_word cannot be configured in platform data
+ */
+ spi->bits_per_word = 8;
+
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ mutex_init(&chip->lock);
+
+ dev_set_drvdata(&spi->dev, chip);
+
+ chip->spi = spi;
+
+ chip->gpio_chip.label = GEN_74X164_DRIVER_NAME,
+ chip->gpio_chip.direction_output = gen_74x164_direction_output;
+ chip->gpio_chip.get = gen_74x164_get_value;
+ chip->gpio_chip.set = gen_74x164_set_value;
+ chip->gpio_chip.base = pdata->base;
+ chip->gpio_chip.ngpio = GEN_74X164_GPIO_COUNT;
+ chip->gpio_chip.can_sleep = 1;
+ chip->gpio_chip.dev = &spi->dev;
+ chip->gpio_chip.owner = THIS_MODULE;
+
+ ret = __gen_74x164_write_config(chip);
+ if (ret) {
+ dev_err(&spi->dev, "Failed writing: %d\n", ret);
+ goto exit_destroy;
+ }
+
+ ret = gpiochip_add(&chip->gpio_chip);
+ if (ret)
+ goto exit_destroy;
+
+ return ret;
+
+exit_destroy:
+ dev_set_drvdata(&spi->dev, NULL);
+ mutex_destroy(&chip->lock);
+ kfree(chip);
+ return ret;
+}
+
+static int gen_74x164_remove(struct spi_device *spi)
+{
+ struct gen_74x164_chip *chip;
+ int ret;
+
+ chip = dev_get_drvdata(&spi->dev);
+ if (chip == NULL)
+ return -ENODEV;
+
+ dev_set_drvdata(&spi->dev, NULL);
+
+ ret = gpiochip_remove(&chip->gpio_chip);
+ if (!ret) {
+ mutex_destroy(&chip->lock);
+ kfree(chip);
+ } else
+ dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
+ ret);
+
+ return ret;
+}
+
+static struct spi_driver gen_74x164_driver = {
+ .driver = {
+ .name = GEN_74X164_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = gen_74x164_probe,
+ .remove = __devexit_p(gen_74x164_remove),
+};
+
+static int __init gen_74x164_init(void)
+{
+ return spi_register_driver(&gen_74x164_driver);
+}
+subsys_initcall(gen_74x164_init);
+
+static void __exit gen_74x164_exit(void)
+{
+ spi_unregister_driver(&gen_74x164_driver);
+}
+module_exit(gen_74x164_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
+MODULE_DESCRIPTION("GPIO expander driver for 74X164 8-bits shift register");
+MODULE_LICENSE("GPL v2");
+
--- /dev/null
+++ b/include/linux/spi/74x164.h
@@ -0,0 +1,11 @@
+#ifndef LINUX_SPI_74X164_H
+#define LINUX_SPI_74X164_H
+
+#define NXP_74HC164_DRIVER_NAME "nxp-74hc164"
+#define GEN_74X164_DRIVER_NAME "74x164"
+
+struct nxp_74hc164_platform_data {
+ unsigned gpio_base;
+ unsigned gpio_pin_data;
+ unsigned gpio_pin_clk;
+struct gen_74x164_chip_platform_data {
+ /* number assigned to the first GPIO */
+ unsigned base;
+};
+
+#endif /* _NXP_74HC164_H */
+#endif
Write Preview
Loading…
Cancel
Save