ralink: correct handle hardware rx 2bytes offset

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44045
master
Felix Fietkau 10 years ago
parent 03ea0cf6f1
commit b3ca42ec8f
  1. 25
      target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
  2. 4
      target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h
  3. 9
      target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c

@ -41,9 +41,8 @@
#include "ralink_ethtool.h"
#define MAX_RX_LENGTH 1536
#define FE_RX_OFFSET (NET_SKB_PAD + NET_IP_ALIGN)
#define FE_RX_HLEN (FE_RX_OFFSET + VLAN_ETH_HLEN + VLAN_HLEN + \
ETH_FCS_LEN)
#define FE_RX_HLEN (NET_SKB_PAD + VLAN_ETH_HLEN + VLAN_HLEN + \
+ NET_IP_ALIGN + ETH_FCS_LEN)
#define DMA_DUMMY_DESC 0xffffffff
#define FE_DEFAULT_MSG_ENABLE \
(NETIF_MSG_DRV | \
@ -239,7 +238,7 @@ static void fe_clean_rx(struct fe_priv *priv)
static int fe_alloc_rx(struct fe_priv *priv)
{
struct net_device *netdev = priv->netdev;
int i;
int i, pad;
priv->rx_data = kcalloc(NUM_DMA_DESC, sizeof(*priv->rx_data),
GFP_KERNEL);
@ -259,9 +258,13 @@ static int fe_alloc_rx(struct fe_priv *priv)
if (!priv->rx_dma)
goto no_rx_mem;
if (priv->flags & FE_FLAG_RX_2B_OFFSET)
pad = 0;
else
pad = NET_IP_ALIGN;
for (i = 0; i < NUM_DMA_DESC; i++) {
dma_addr_t dma_addr = dma_map_single(&netdev->dev,
priv->rx_data[i] + FE_RX_OFFSET,
priv->rx_data[i] + NET_SKB_PAD + pad,
priv->rx_buf_size,
DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(&netdev->dev, dma_addr)))
@ -752,7 +755,7 @@ static int fe_poll_rx(struct napi_struct *napi, int budget,
struct sk_buff *skb;
u8 *data, *new_data;
struct fe_rx_dma *rxd, trxd;
int done = 0;
int done = 0, pad;
bool rx_vlan = netdev->features & NETIF_F_HW_VLAN_CTAG_RX;
if (netdev->features & NETIF_F_RXCSUM)
@ -760,6 +763,10 @@ static int fe_poll_rx(struct napi_struct *napi, int budget,
else
checksum_bit = 0;
if (priv->flags & FE_FLAG_RX_2B_OFFSET)
pad = 0;
else
pad = NET_IP_ALIGN;
while (done < budget) {
unsigned int pktlen;
dma_addr_t dma_addr;
@ -778,7 +785,7 @@ static int fe_poll_rx(struct napi_struct *napi, int budget,
goto release_desc;
}
dma_addr = dma_map_single(&netdev->dev,
new_data + FE_RX_OFFSET,
new_data + NET_SKB_PAD + pad,
priv->rx_buf_size,
DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(&netdev->dev, dma_addr))) {
@ -792,7 +799,7 @@ static int fe_poll_rx(struct napi_struct *napi, int budget,
put_page(virt_to_head_page(new_data));
goto release_desc;
}
skb_reserve(skb, FE_RX_OFFSET);
skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
dma_unmap_single(&netdev->dev, trxd.rxd1,
priv->rx_buf_size, DMA_FROM_DEVICE);
@ -1115,6 +1122,8 @@ static int fe_open(struct net_device *dev)
napi_enable(&priv->rx_napi);
val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN;
if (priv->flags & FE_FLAG_RX_2B_OFFSET)
val |= FE_RX_2B_OFFSET;
val |= priv->soc->pdma_glo_cfg;
fe_reg_w32(val, FE_REG_PDMA_GLO_CFG);

@ -289,6 +289,7 @@ enum fe_work_flag {
#define FE_PST_DTX_IDX1 BIT(1)
#define FE_PST_DTX_IDX0 BIT(0)
#define FE_RX_2B_OFFSET BIT(31)
#define FE_TX_WB_DDONE BIT(6)
#define FE_RX_DMA_BUSY BIT(3)
#define FE_TX_DMA_BUSY BIT(1)
@ -401,6 +402,9 @@ struct fe_soc_data
#define FE_FLAG_PADDING_64B BIT(0)
#define FE_FLAG_PADDING_BUG BIT(1)
#define FE_FLAG_JUMBO_FRAME BIT(2)
#define FE_FLAG_RX_2B_OFFSET BIT(3)
#define FE_FLAG_RX_SG_DMA BIT(4)
#define FE_FLAG_RX_VLAN_CTAG BIT(5)
#define FE_STAT_REG_DECLARE \
_FE(tx_bytes) \

@ -28,7 +28,6 @@
#define MT7620A_CDMA_CSG_CFG 0x400
#define MT7620_DMA_VID (MT7620A_CDMA_CSG_CFG | 0x30)
#define MT7621_DMA_VID 0xa8
#define MT7620A_DMA_2B_OFFSET BIT(31)
#define MT7620A_RESET_FE BIT(21)
#define MT7621_RESET_FE BIT(6)
#define MT7620A_RESET_ESW BIT(23)
@ -179,7 +178,7 @@ static void mt7620_init_data(struct fe_soc_data *data,
{
struct fe_priv *priv = netdev_priv(netdev);
priv->flags = FE_FLAG_PADDING_64B;
priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET;
netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
NETIF_F_HW_VLAN_CTAG_TX;
@ -193,7 +192,7 @@ static void mt7621_init_data(struct fe_soc_data *data,
{
struct fe_priv *priv = netdev_priv(netdev);
priv->flags = FE_FLAG_PADDING_64B;
priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET;
netdev->hw_features = NETIF_F_HW_VLAN_CTAG_TX;
}
@ -220,7 +219,7 @@ static struct fe_soc_data mt7620_data = {
.switch_config = mt7620_gsw_config,
.port_init = mt7620_port_init,
.reg_table = mt7620_reg_table,
.pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET,
.pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
.rx_int = RT5350_RX_DONE_INT,
.tx_int = RT5350_TX_DONE_INT,
.checksum_bit = MT7620_L4_VALID,
@ -242,7 +241,7 @@ static struct fe_soc_data mt7621_data = {
.switch_init = mt7620_gsw_probe,
.switch_config = mt7621_gsw_config,
.reg_table = mt7621_reg_table,
.pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET,
.pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
.rx_int = RT5350_RX_DONE_INT,
.tx_int = RT5350_TX_DONE_INT,
.checksum_bit = MT7621_L4_VALID,

Loading…
Cancel
Save