kernel: update linux 3.9 patches to rc8

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36469
master
Jonas Gorski 12 years ago
parent a33dd13c98
commit ad1d3f00cb
  1. 64
      target/linux/generic/patches-3.9/020-ssb_backport.patch
  2. 4
      target/linux/generic/patches-3.9/201-extra_optimization.patch
  3. 6
      target/linux/generic/patches-3.9/642-bridge_port_isolate.patch
  4. 8
      target/linux/generic/patches-3.9/643-bridge_remove_ipv6_dependency.patch
  5. 2
      target/linux/generic/patches-3.9/644-bridge_optimize_netfilter_hooks.patch
  6. 4
      target/linux/generic/patches-3.9/721-phy_packets.patch

@ -1,50 +1,3 @@
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -5165,7 +5165,8 @@ static void b43_nphy_pmu_spur_avoid(stru
#endif
#ifdef CONFIG_B43_SSB
case B43_BUS_SSB:
- /* FIXME */
+ ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
+ avoid);
break;
#endif
}
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -675,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
return 0;
}
}
+
+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
+{
+ u32 pmu_ctl = 0;
+
+ switch (cc->dev->bus->chip_id) {
+ case 0x4322:
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
+ if (spuravoid == 1)
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
+ else
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ break;
+ case 43222:
+ /* TODO: BCM43222 requires updating PLLs too */
+ return;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+ cc->dev->bus->chip_id);
+ return;
+ }
+
+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
+}
+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
@ -88,23 +41,6 @@
}
/* Revs 4 5 and 8 have partially shared layout */
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -219,6 +219,7 @@
#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
+#define SSB_CHIPCO_PMU_CTL_PLL_UPD 0x00000400
#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
@@ -667,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
enum ssb_pmu_ldo_volt_id id, u32 voltage);
void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
#endif /* LINUX_SSB_CHIPCO_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -289,11 +289,11 @@

@ -1,6 +1,6 @@
--- a/Makefile
+++ b/Makefile
@@ -570,9 +570,9 @@ endif # $(dot-config)
@@ -571,9 +571,9 @@ endif # $(dot-config)
all: vmlinux
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
@ -12,7 +12,7 @@
endif
include $(srctree)/arch/$(SRCARCH)/Makefile
@@ -646,6 +646,9 @@ endif
@@ -647,6 +647,9 @@ endif
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)

@ -1,10 +1,10 @@
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -156,6 +156,7 @@ struct net_bridge_port
#define BR_BPDU_GUARD 0x00000002
@@ -157,6 +157,7 @@ struct net_bridge_port
#define BR_ROOT_BLOCK 0x00000004
#define BR_MULTICAST_FAST_LEAVE 0x00000008
+#define BR_ISOLATE_MODE 0x00000010
#define BR_ADMIN_COST 0x00000010
+#define BR_ISOLATE_MODE 0x00000020
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
u32 multicast_startup_queries_sent;

@ -32,7 +32,7 @@
+obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_stubs.o
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1250,7 +1250,7 @@ out:
@@ -1248,7 +1248,7 @@ out:
return ret;
}
@ -41,7 +41,7 @@
const struct in6_addr *daddr, unsigned int prefs,
struct in6_addr *saddr)
{
@@ -1375,7 +1375,6 @@ try_nextdev:
@@ -1373,7 +1373,6 @@ try_nextdev:
in6_ifa_put(hiscore->ifa);
return 0;
}
@ -49,7 +49,7 @@
int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr,
unsigned char banned_flags)
@@ -4965,6 +4964,9 @@ int __init addrconf_init(void)
@@ -4947,6 +4946,9 @@ int __init addrconf_init(void)
ipv6_addr_label_rtnl_register();
@ -59,7 +59,7 @@
return 0;
errout:
rtnl_af_unregister(&inet6_ops);
@@ -4983,6 +4985,9 @@ void addrconf_cleanup(void)
@@ -4965,6 +4967,9 @@ void addrconf_cleanup(void)
struct net_device *dev;
int i;

@ -87,7 +87,7 @@
if (vlan_tx_tag_present(skb))
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -698,15 +698,29 @@ static inline u16 br_get_pvid(const stru
@@ -699,15 +699,29 @@ static inline u16 br_get_pvid(const stru
/* br_netfilter.c */
#ifdef CONFIG_BRIDGE_NETFILTER

@ -79,7 +79,7 @@
help
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2529,9 +2529,19 @@ int dev_hard_start_xmit(struct sk_buff *
@@ -2532,9 +2532,19 @@ int dev_hard_start_xmit(struct sk_buff *
if (!list_empty(&ptype_all))
dev_queue_xmit_nit(skb, dev);
@ -102,7 +102,7 @@
if (rc == NETDEV_TX_OK)
txq_trans_update(txq);
return rc;
@@ -2554,9 +2564,19 @@ gso:
@@ -2557,9 +2567,19 @@ gso:
if (!list_empty(&ptype_all))
dev_queue_xmit_nit(nskb, dev);

Loading…
Cancel
Save