Add support for Atheros AP96 reference board

This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23125
master
Felix Fietkau 14 years ago
parent a41b1df07b
commit a7bb7dd99e
  1. 16
      target/linux/ar71xx/base-files/etc/defconfig/ap96/network
  2. 3
      target/linux/ar71xx/base-files/etc/diag.sh
  3. 3
      target/linux/ar71xx/base-files/lib/ar71xx.sh
  4. 1
      target/linux/ar71xx/config-2.6.32
  5. 1
      target/linux/ar71xx/config-2.6.33
  6. 1
      target/linux/ar71xx/config-2.6.34
  7. 1
      target/linux/ar71xx/config-2.6.35
  8. 9
      target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
  9. 1
      target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
  10. 175
      target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c
  11. 1
      target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
  12. 11
      target/linux/ar71xx/generic/profiles/atheros.mk
  13. 5
      target/linux/ar71xx/image/Makefile

@ -0,0 +1,16 @@
config interface loopback
option ifname lo
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
config interface lan
option ifname eth0
option type bridge
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
config interface wan
option ifname eth1
option proto dhcp

@ -36,6 +36,9 @@ get_status_led() {
ap83)
status_led="ap83:green:power"
;;
ap96)
status_led="ap96:green:led2"
;;
aw-nr580)
status_led="aw-nr580:green:ready"
;;

@ -16,6 +16,9 @@ ar71xx_board_name() {
*AP83)
name="ap83"
;;
*AP96)
name="ap96"
;;
*AW-NR580)
name="aw-nr580"
;;

@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y
CONFIG_AR71XX_DEV_USB=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AP96=y
CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y

@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y
CONFIG_AR71XX_DEV_USB=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AP96=y
CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y

@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y
CONFIG_AR71XX_DEV_USB=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AP96=y
CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y

@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y
CONFIG_AR71XX_DEV_USB=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AP96=y
CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y

@ -19,6 +19,15 @@ config AR71XX_MACH_AP83
select AR71XX_DEV_USB
default n
config AR71XX_MACH_AP96
bool "Atheros AP96 board support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AP94_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_USB
default n
config AR71XX_MACH_DIR_600_A1
bool "D-Link DIR-600 rev. A1 support"
select AR71XX_DEV_AP91_ETH

@ -29,6 +29,7 @@ obj-$(CONFIG_AR71XX_NVRAM) += nvram.o
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_AR71XX_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o
obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o

@ -0,0 +1,175 @@
/*
* Atheros AP96 board support
*
* Copyright (C) 2009 Marco Porsch
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010 Atheros Communications
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ap94-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-usb.h"
#define AP96_GPIO_LED_12_GREEN 0
#define AP96_GPIO_LED_3_GREEN 1
#define AP96_GPIO_LED_2_GREEN 2
#define AP96_GPIO_LED_WPS_GREEN 4
#define AP96_GPIO_LED_5_GREEN 5
#define AP96_GPIO_LED_4_ORANGE 6
/* Reset button - next to the power connector */
#define AP96_GPIO_BTN_RESET 3
/* WPS button - next to a led on right */
#define AP96_GPIO_BTN_WPS 8
#define AP96_BUTTONS_POLL_INTERVAL 20
#define AP96_WMAC0_MAC_OFFSET 0x120c
#define AP96_WMAC1_MAC_OFFSET 0x520c
#define AP96_CALDATA0_OFFSET 0x1000
#define AP96_CALDATA1_OFFSET 0x5000
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition ap96_partitions[] = {
{
.name = "uboot",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "env",
.offset = 0x030000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "rootfs",
.offset = 0x040000,
.size = 0x600000,
} , {
.name = "uImage",
.offset = 0x640000,
.size = 0x1b0000,
} , {
.name = "caldata",
.offset = 0x7f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data ap96_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = ap96_partitions,
.nr_parts = ARRAY_SIZE(ap96_partitions),
#endif
};
/*
* AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12
* below (from left to right on the board). Led 1 seems to be on whenever the
* board is powered. Led 11 shows LAN link activity actity. Led 3 is orange;
* others are green.
*
* In addition, there is one led next to a button on the right side for WPS.
*/
static struct gpio_led ap96_leds_gpio[] __initdata = {
{
.name = "ap96:green:led2",
.gpio = AP96_GPIO_LED_2_GREEN,
.active_low = 1,
}, {
.name = "ap96:green:led3",
.gpio = AP96_GPIO_LED_3_GREEN,
.active_low = 1,
}, {
.name = "ap96:orange:led4",
.gpio = AP96_GPIO_LED_4_ORANGE,
.active_low = 1,
}, {
.name = "ap96:green:led5",
.gpio = AP96_GPIO_LED_5_GREEN,
.active_low = 1,
}, {
.name = "ap96:green:led12",
.gpio = AP96_GPIO_LED_12_GREEN,
.active_low = 1,
}, { /* next to a button on right */
.name = "ap96:green:wps",
.gpio = AP96_GPIO_LED_WPS_GREEN,
.active_low = 1,
}
};
static struct gpio_button ap96_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.threshold = 3,
.gpio = AP96_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.threshold = 3,
.gpio = AP96_GPIO_BTN_WPS,
.active_low = 1,
}
};
static void __init ap96_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ar71xx_add_device_mdio(0xfffffffe);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0x1;
ar71xx_add_device_eth(0);
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art, 1);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_pll_data.pll_1000 = 0x1f000000;
ar71xx_add_device_eth(1);
ar71xx_add_device_usb();
ar71xx_add_device_m25p80(&ap96_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio),
ap96_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, AP96_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(ap96_gpio_buttons),
ap96_gpio_buttons);
ap94_pci_init(art + AP96_CALDATA0_OFFSET,
art + AP96_WMAC0_MAC_OFFSET,
art + AP96_CALDATA1_OFFSET,
art + AP96_WMAC1_MAC_OFFSET);
}
MIPS_MACHINE(AR71XX_MACH_AP96, "AP96", "Atheros AP96", ap96_setup);

@ -58,6 +58,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_EAP7660D, /* Senao EAP7660D */
AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
AR71XX_MACH_AP96, /* Atheros AP96 */
};
#endif /* _AR71XX_MACHTYPE_H */

@ -28,6 +28,17 @@ endef
$(eval $(call Profile,AP83))
define Profile/AP96
NAME:=Atheros AP96 reference board
PACKAGES:=wpad-mini kmod-ath9k kmod-usb-core kmod-usb2
endef
define Profile/AP96/Description
Package set optimized for the Atheros AP96 reference board.
endef
$(eval $(call Profile,AP96))
define Profile/PB42
NAME:=Atheros PB42 reference board
PACKAGES:=wpad-mini kmod-ath9k kmod-usb-core kmod-usb-ohci kmod-usb2

@ -571,6 +571,10 @@ define Image/Build/Profile/WNDR3700
$(call Image/Build/Template/$(fs_64k)/$(1),WNDR3700,wndr3700,board=WNDR3700)
endef
define Image/Build/Profile/AP96
$(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap96,board=AP96)
endef
define Image/Build/Profile/WRT400N
$(call Image/Build/Template/$(fs_64k)/$(1),WRT400N,wrt400n,board=WRT400N)
endef
@ -623,6 +627,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/UBNT,$(1))
$(call Image/Build/Profile/WP543,$(1))
$(call Image/Build/Profile/WNDR3700,$(1))
$(call Image/Build/Profile/AP96,$(1))
$(call Image/Build/Profile/WRT400N,$(1))
$(call Image/Build/Profile/WRT160NL,$(1))
$(call Image/Build/Profile/WZRHPG300NH,$(1))

Loading…
Cancel
Save