add preliminary support for the bifferboard, patch from bifferos

SVN-Revision: 18766
master
Florian Fainelli 15 years ago
parent 3fcaccd9b3
commit a39dcb405e
  1. 2
      target/linux/rdc/Makefile
  2. 8
      target/linux/rdc/bifferboard/config-2.6.30
  3. 1
      target/linux/rdc/bifferboard/target.mk
  4. 243
      target/linux/rdc/files/drivers/mtd/maps/bifferboard-flash.c
  5. 40
      target/linux/rdc/image/mkimg_bifferboard.py

@ -11,7 +11,7 @@ BOARD:=rdc
BOARDNAME:=RDC 321x
FEATURES:=squashfs jffs2 pci usb pcmcia
CFLAGS:=-Os -pipe -march=i486 -funit-at-a-time
SUBTARGETS:=amit ar525w r8610 dir-450 sitecom
SUBTARGETS:=amit ar525w r8610 dir-450 sitecom bifferboard
LINUX_VERSION:=2.6.30.10

@ -0,0 +1,8 @@
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2"
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_RDC3210=y
CONFIG_MTD_RDC3210_ALLOW_JFFS2=y
CONFIG_MTD_RDC3210_BUSWIDTH=2
# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set
CONFIG_MTD_RDC3210_SIZE=0x800000
# CONFIG_MTD_RDC3210_STATIC_MAP is not set

@ -0,0 +1 @@
BOARDNAME:=Bifferboard

@ -0,0 +1,243 @@
/* Flash mapping for Bifferboard, (c) bifferos@yahoo.co.uk
* Works with 1, 4 and 8MB flash versions
*/
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#define DRV "bifferboard-flash: "
static struct mtd_info *bb_mtd = NULL;
#define SIZE_BIFFBOOT 0x10000
#define SIZE_SECTOR 0x10000
#define SIZE_CONFIG 0x02000
#define SIZE_1MB 0x00100000
#define SIZE_4MB 0x00400000
#define SIZE_8MB 0x00800000
#define BASE_1MB 0xfff00000
#define BASE_4MB 0xffc00000
#define BASE_8MB 0xff800000
#define OFFS_KERNEL 0x6000
#define OFFS_CONFIG 0x4000
/*
* Flash detection code. This is needed because the cfi_probe doesn't probe
* for the size correctly. You actually have to know the flash size before you
* call it, or so it seems. It does work correctly if you map the entire flash
* chip, but unsure of the implications for mapping more mem than exists.
*/
static unsigned char ReadFlash(void* base, u32 addr)
{
unsigned char val = *(volatile unsigned char *)(base+addr);
udelay(1);
return val;
}
static void WriteFlash(void* base, u32 addr, unsigned short data)
{
*(volatile unsigned short *)(base+addr) = data;
}
static DEFINE_SPINLOCK(flash_lock);
static u32 bb_detect(void)
{
u32 ret = 0;
ulong flags;
/* for detection, map in just the 1MB device, 1st 64k is enough */
void* base = ioremap_nocache(BASE_1MB, 0x10000);
if (!base)
{
pr_err(DRV "Failed to map flash for probing\n");
return 0;
}
spin_lock_irqsave(&flash_lock, flags);
/* put flash in auto-detect mode */
WriteFlash(base, 0xaaaa, 0xaaaa);
WriteFlash(base, 0x5554, 0x5555);
WriteFlash(base, 0xaaaa, 0x9090);
/* Read the auto-config data - 4 values in total */
ret = ReadFlash(base, 0x0000); ret <<= 8;
ret |= ReadFlash(base, 0x0200); ret <<= 8;
ret |= ReadFlash(base, 0x0003); ret <<= 8;
ret |= ReadFlash(base, 0x0002);
/* exit the autodetect state */
WriteFlash(base, 0x0000, 0xf0f0);
spin_unlock_irqrestore(&flash_lock, flags);
/* unmap it, it'll be re-mapped based on the detection */
iounmap(base);
return ret;
}
static struct map_info bb_map;
/* Update the map, using the detected flash signature. */
static int bb_adjust_map(unsigned long sig, struct map_info* m)
{
m->bankwidth = 2;
switch (sig)
{
case 0x7f1c225b :
m->name = "ENLV800B";
m->phys = BASE_1MB;
m->size = SIZE_1MB;
break;
case 0x7f1c22f9 :
m->name = "ENLV320B";
m->phys = BASE_4MB;
m->size = SIZE_4MB;
break;
case 0x7f1c22cb :
m->name = "ENLV640B";
m->phys = BASE_8MB;
m->size = SIZE_8MB;
break;
default:
return -ENXIO;
}
return 0;
}
/* adjust partition sizes, prior to adding the partition
* Values not specified by defines here are subject to replacement based on
* the real flash size. (0x00000000 being the exception, of course) */
static struct mtd_partition bb_parts[] =
{
/* 0 */ { name: "kernel", offset: 0x00000000, size: 0x000fa000 },
/* 1 */ { name: "rootfs", offset: MTDPART_OFS_APPEND, size: 0x002F0000 },
/* 2 */ { name: "biffboot", offset: MTDPART_OFS_APPEND, size: MTDPART_SIZ_FULL, mask_flags: MTD_WRITEABLE },
};
/* returns the count of partitions to be used */
static ulong bb_adjust_partitions(struct map_info* m)
{
/* Read the kernel offset value, 1036 bytes into the config block. */
u16 km_units = *((u16*)(m->virt + OFFS_CONFIG + 1036));
u32 kernelmax = 0x200000; /* Biffboot 2.7 or earlier default */
/* special-case 1MB devices, because there are fewer partitions */
if (m->size == SIZE_1MB)
{
bb_parts[0].size = SIZE_1MB - SIZE_BIFFBOOT; /* kernel */
bb_parts[1].name = "biffboot"; /* biffboot */
bb_parts[1].offset = MTDPART_OFS_APPEND; /* biffboot */
bb_parts[1].size = MTDPART_SIZ_FULL; /* biffboot */
bb_parts[1].mask_flags = MTD_WRITEABLE;
return 2; /* because there's no rootfs now */
}
/* sanity check */
if (km_units > ((m->size-SIZE_BIFFBOOT)/SIZE_SECTOR))
{
pr_err(DRV "config block has invalid kernelmax\n");
return 0;
}
kernelmax = km_units * SIZE_SECTOR;
/* Kernel */
bb_parts[0].size = kernelmax;
/* rootfs */
bb_parts[1].size = m->size - kernelmax - SIZE_BIFFBOOT;
return 3; /* 3 partitions */
}
static int __init init_bb_map(void)
{
int ret;
ulong signature = bb_detect();
ulong part_len;
if (!signature)
{
pr_err(DRV "Undetected flash chip");
return -ENXIO;
}
ret = bb_adjust_map(signature, &bb_map);
if (ret)
{
pr_err(DRV "Unrecognised flash chip (signature: 0x%lx)\n", signature);
return ret;
}
bb_map.virt = ioremap_nocache(bb_map.phys, bb_map.size);
if (!bb_map.virt)
{
pr_err(DRV "ioremap\n");
return -EIO;
}
bb_mtd = do_map_probe("cfi_probe", &bb_map);
if (!bb_mtd)
{
/* cfi_probe fails here for 1MB devices */
pr_err(DRV "cfi_probe\n");
ret = -ENXIO;
goto err;
}
part_len = bb_adjust_partitions(&bb_map);
if (!part_len)
{
pr_err(DRV "no partitions established");
ret = -ENXIO;
goto err2;
}
bb_mtd->owner = THIS_MODULE;
ret = add_mtd_partitions(bb_mtd, bb_parts, part_len);
if (ret)
{
pr_err(DRV "add_mtd_partitions\n");
ret = -ENXIO;
goto err2;
}
return 0;
err2:
map_destroy(bb_mtd);
err:
iounmap(bb_map.virt);
return ret;
}
static void __exit exit_bb_map(void)
{
del_mtd_partitions(bb_mtd);
map_destroy(bb_mtd);
iounmap(bb_map.virt);
}
module_init(init_bb_map);
module_exit(exit_bb_map);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Bifferos <bifferos@yahoo.co.uk>");
MODULE_DESCRIPTION("MTD map driver for Bifferboard");

@ -0,0 +1,40 @@
#!/usr/bin/env python
"""
Create firmware for 8MB Bifferboards
Firmware does not include the config blocks
Firmware starts just after config
"""
import struct, sys
kernel_extent = 0x200000
config = 0x6000
if __name__ == "__main__":
if len(sys.argv) != 4:
print "usage: mkimg_bifferboard.py <kernel> <64k JFFS> <output file>"
sys.exit(0)
bzimage = sys.argv[1]
rootfs = sys.argv[2]
target = sys.argv[3]
# Kernel first
fw = file(bzimage).read()
if len(fw) > (kernel_extent - config):
raise IOError("Kernel too large")
# Pad up to 0x200000
while len(fw) < (kernel_extent - config):
fw += "\xff"
fw += file(rootfs).read()
# Check length of total
if len(fw) > (0x800000 - 0x10000 - 0x6000):
raise IOError("Rootfs too large")
file(target,"wb").write(fw)
print "Firmware written to '%s'" % target
Loading…
Cancel
Save