ramips: Archer C50 cleanup

- setting read-only flag to important partitions
- enabling PA to improve 2.4 GHz signal strength
- add missing leds
- rename colour led
- add mac adress to 5GHz wlan interface
- included <dt-bindings/input/input.h> and <dt-bindings/gpio/gpio.h>

Signed-off-by: Henryk Heisig hyniu@o2.pl
master
Henryk Heisig 8 years ago committed by John Crispin
parent 7929ab60bf
commit a34f96d6cf
  1. 11
      target/linux/ramips/base-files/etc/board.d/01_leds
  2. 4
      target/linux/ramips/base-files/etc/diag.sh
  3. 63
      target/linux/ramips/dts/ArcherC50.dts

@ -88,11 +88,12 @@ c20i)
ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio"
;;
c50)
ucidef_set_led_default "power" "power" "$board:blue:power" "0"
ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" "eth0.2"
set_usb_led "$board:blue:usb"
ucidef_set_led_wlan "wlan2g" "wlan2g" "$board:blue:wlan2g" "phy1radio"
ucidef_set_led_wlan "wlan5g" "wlan5g" "$board:blue:wlan5g" "phy0radio"
ucidef_set_led_default "power" "power" "$board:green:power" "0"
ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
set_usb_led "$board:green:usb"
ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:green:wlan2g" wlan1
set_wifi_led "$board:green:wlan5g"
;;
cf-wr800n)
ucidef_set_led_netdev "lan" "lan" "$board:white:ethernet" eth0.1

@ -19,6 +19,7 @@ get_status_led() {
asl26555|\
br-6425|\
br-6475nd|\
c50|\
dch-m225|\
dir-860l-b1|\
e1700|\
@ -91,9 +92,6 @@ get_status_led() {
wrh-300cr)
status_led="$board:green:wps"
;;
c50)
status_led="tp-link:blue:power"
;;
cf-wr800n|\
psg1208)
status_led="$board:white:wps"

@ -1,4 +1,6 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "mt7620a.dtsi"
@ -14,28 +16,43 @@
compatible = "gpio-leds";
lan {
label = "c50:blue:lan";
gpios = <&gpio0 1 1>;
label = "c50:green:lan";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
power {
label = "c50:blue:power";
gpios = <&gpio0 7 0>;
label = "c50:green:power";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
usb {
label = "c50:blue:usb";
gpios = <&gpio0 9 1>;
label = "c50:green:usb";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wan {
label = "c50:green:wan";
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
wan_orange {
label = "c50:orange:wan";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "c50:blue:wlan5g";
gpios = <&gpio0 11 1>;
label = "c50:green:wlan5g";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "c50:blue:wlan2g";
gpios = <&gpio3 0 1>;
label = "c50:green:wlan2g";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
wps {
label = "c50:green:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
@ -47,17 +64,21 @@
reset {
label = "reset";
gpios = <&gpio0 13 1>;
linux,code = <0x198>;
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 2 1>;
linux,code = <0xf7>;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
}; };
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
@ -91,21 +112,25 @@
partition@7c0000 {
label = "config";
reg = <0x7c0000 0x10000>;
read-only;
};
rom: partition@7d0000 {
label = "rom";
reg = <0x7d0000 0x10000>;
read-only;
};
partition@7e0000 {
label = "romfile";
reg = <0x7e0000 0x10000>;
read-only;
};
radio: partition@7f0000 {
label = "radio";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
@ -113,15 +138,19 @@
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
ralink,function = "gpio";
};
pa {
ralink,group = "pa";
ralink,function = "pa";
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&rom 0xf100>;
mediatek,portmap = "wllll";
};
@ -151,6 +180,8 @@
device_type = "pci";
mediatek,mtd-eeprom = <&radio 32768>;
mediatek,2ghz = <0>;
mtd-mac-address = <&rom 0xf100>;
mtd-mac-address-increment = <(-1)>;
};
};
};

Loading…
Cancel
Save