apm821xx: shuffle helper scripts to the front

In a patch for the ath79, Mathias Kresin mentioned that
helper scripts should be in front of the device targets.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

target/linux/apm821xx/image/Makefile

@@ -7,37 +7,49 @@ include $(INCLUDE_DIR)/image.mk
 
 DEVICE_VARS += IMAGE_SIZE DTB_SIZE
 
-define Device/Default
-  PROFILES := Default
-  KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
-  DEVICE_DTS :=
-  KERNEL_ENTRY := 0x00000000
-  KERNEL_LOADADDR := 0x00000000
-  DEVICE_DTS_DIR := ../dts
-  SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
+define Build/boot-img
+	$(RM) -rf $@.bootdir
+	mkdir -p $@.bootdir/boot
+
+	$(CP) $@.scr $@.bootdir/boot/boot.scr
+	$(CP) $(IMAGE_KERNEL).dtb $@.bootdir/boot/$(DEVICE_DTB)
+	$(CP) $(IMAGE_KERNEL) $@.bootdir/boot/uImage
+
+	genext2fs --block-size $(BLOCKSIZE:%k=%Ki) --size-in-blocks $$((1024 * $(BOOT_SIZE))) --root $@.bootdir $@.boot
+
+	# convert it to revision 1 - needed for u-boot ext2load
+	$(STAGING_DIR_HOST)/bin/tune2fs -O filetype $@.boot
+	$(STAGING_DIR_HOST)/bin/e2fsck -pDf $@.boot > /dev/null
 endef
 
-define Build/dtb
-	$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
+define Build/boot-script
+	$(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T script -C none -n "$(PROFILE) Boot Script" \
+		-d mbl_boot.scr \
+		$@.scr
 endef
 
-define Build/prepend-dtb
-	cat "$@.dtb.uimage" "$@" > "$@.new"
-	mv "$@.new" "$@"
+define Build/copy-file
+	cat "$(1)" > "$@"
 endef
 
-define Build/export-dtb
-	cp $(IMAGE_KERNEL).dtb $@
+define Build/create-uImage-dtb
+	# flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
+	-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
+		-O linux -T kernel -C none \
+		-n '$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
+		-d "$@.dtb" "$@.dtb.uimage"
 endef
 
-ifeq ($(SUBTARGET),nand)
+define Build/dtb
+	$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
+endef
 
-define Image/cpiogz
-	( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz )
+define Build/export-dtb
+	cp $(IMAGE_KERNEL).dtb $@
 endef
 
-define Build/copy-file
-	cat "$(1)" > "$@"
+define Build/hdd-img
+	./mbl_gen_hdd_img.sh $@ $@.boot $(IMAGE_ROOTFS) $(BOOT_SIZE) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
 endef
 
 define Build/MerakiAdd-dtb
@@ -72,6 +84,56 @@ define Build/MerakiNAND
 	@cp $@.new $@
 endef
 
+define Build/MuImage-initramfs
+	rm -rf $@.fakerd $@.new
+
+	dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
+
+	# Netgear used an old uboot that doesn't have FIT support.
+	# So we are stuck with either a full ext2/4 fs in a initrd.
+	# ... or we try to make the "multi" image approach to work
+	# for us.
+	#
+	# Sadly, the "multi" image has to consists of three
+	# "fixed" parts in the following "fixed" order:
+	# 1. The kernel which is in $@
+	# 2. The (fake) initrd which is in $@.fakerd
+	# 3. The device tree binary which is in $@.dtb
+	#
+	# Now, given that we use the function for the kernel which
+	# already has a initramfs image inside, we still have to
+	# add a "fake" initrd (which a mkimage header) in the second
+	# part of the legacy multi image. Since we need to put the
+	# device tree stuff into part 3.
+
+	-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi \
+		-C $(1) -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) \
+		-n '$(BOARD_NAME) initramfs' -d $@:$@.fakerd:$@.dtb $@.new
+	mv $@.new $@
+	rm -rf $@.fakerd
+endef
+
+define Build/prepend-dtb
+	cat "$@.dtb.uimage" "$@" > "$@.new"
+	mv "$@.new" "$@"
+endef
+
+define Image/cpiogz
+	( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz )
+endef
+
+define Device/Default
+  PROFILES := Default
+  KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
+  DEVICE_DTS :=
+  KERNEL_ENTRY := 0x00000000
+  KERNEL_LOADADDR := 0x00000000
+  DEVICE_DTS_DIR := ../dts
+  SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
+endef
+
+ifeq ($(SUBTARGET),nand)
+
 define Device/meraki_mr24
   DEVICE_TITLE := Cisco Meraki MR24
   DEVICE_PACKAGES := kmod-spi-gpio -swconfig
@@ -115,43 +177,6 @@ define Device/meraki_mx60
 endef
 TARGET_DEVICES += meraki_mx60
 
-define Build/create-uImage-dtb
-	# flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
-	-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
-		-O linux -T kernel -C none \
-		-n '$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
-		-d "$@.dtb" "$@.dtb.uimage"
-endef
-
-define Build/MuImage-initramfs
-	rm -rf $@.fakerd $@.new
-
-	dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
-
-	# Netgear used an old uboot that doesn't have FIT support.
-	# So we are stuck with either a full ext2/4 fs in a initrd.
-	# ... or we try to make the "multi" image approach to work
-	# for us.
-	#
-	# Sadly, the "multi" image has to consists of three
-	# "fixed" parts in the following "fixed" order:
-	# 1. The kernel which is in $@
-	# 2. The (fake) initrd which is in $@.fakerd
-	# 3. The device tree binary which is in $@.dtb
-	#
-	# Now, given that we use the function for the kernel which
-	# already has a initramfs image inside, we still have to
-	# add a "fake" initrd (which a mkimage header) in the second
-	# part of the legacy multi image. Since we need to put the
-	# device tree stuff into part 3.
-
-	-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi \
-		-C $(1) -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) \
-		-n '$(BOARD_NAME) initramfs' -d $@:$@.fakerd:$@.dtb $@.new
-	mv $@.new $@
-	rm -rf $@.fakerd
-endef
-
 define Device/netgear_wndap6x0
   DEVICE_PACKAGES := kmod-eeprom-at24
   SUBPAGESIZE := 256
@@ -217,32 +242,6 @@ endif
 
 ifeq ($(SUBTARGET),sata)
 
-### Image scripts for the WD My Book Live Series ###
-define Build/boot-script
-	$(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T script -C none -n "$(PROFILE) Boot Script" \
-		-d mbl_boot.scr \
-		$@.scr
-endef
-
-define Build/boot-img
-	$(RM) -rf $@.bootdir
-	mkdir -p $@.bootdir/boot
-
-	$(CP) $@.scr $@.bootdir/boot/boot.scr
-	$(CP) $(IMAGE_KERNEL).dtb $@.bootdir/boot/$(DEVICE_DTB)
-	$(CP) $(IMAGE_KERNEL) $@.bootdir/boot/uImage
-
-	genext2fs --block-size $(BLOCKSIZE:%k=%Ki) --size-in-blocks $$((1024 * $(BOOT_SIZE))) --root $@.bootdir $@.boot
-
-	# convert it to revision 1 - needed for u-boot ext2load
-	$(STAGING_DIR_HOST)/bin/tune2fs -O filetype $@.boot
-	$(STAGING_DIR_HOST)/bin/e2fsck -pDf $@.boot > /dev/null
-endef
-
-define Build/hdd-img
-	./mbl_gen_hdd_img.sh $@ $@.boot $(IMAGE_ROOTFS) $(BOOT_SIZE) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
-endef
-
 define Device/wd_mybooklive
   DEVICE_TITLE := Western Digital My Book Live Series (Single + Duo)
   DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-basic