refresh 2.6.26 patches

SVN-Revision: 13135
master
Gabor Juhos 16 years ago
parent 2c638cf43b
commit a1bf28950d
  1. 6
      target/linux/adm5120/patches-2.6.26/001-adm5120.patch
  2. 4
      target/linux/adm5120/patches-2.6.26/002-adm5120_flash.patch
  3. 4
      target/linux/adm5120/patches-2.6.26/003-adm5120_switch.patch
  4. 4
      target/linux/adm5120/patches-2.6.26/005-adm5120_usb.patch
  5. 2
      target/linux/adm5120/patches-2.6.26/007-adm5120_pci.patch
  6. 4
      target/linux/adm5120/patches-2.6.26/009-adm5120_leds_switch_trigger.patch
  7. 4
      target/linux/adm5120/patches-2.6.26/100-mtd_myloder_partition_parser.patch
  8. 6
      target/linux/adm5120/patches-2.6.26/101-cfi_fixup_macronix_bootloc.patch
  9. 2
      target/linux/adm5120/patches-2.6.26/102-jedec_pmc_39lvxxx_chips.patch
  10. 4
      target/linux/adm5120/patches-2.6.26/103-mtd_trxsplit.patch
  11. 4
      target/linux/adm5120/patches-2.6.26/120-rb153_cf_driver.patch
  12. 58
      target/linux/adm5120/patches-2.6.26/200-amba_pl010_hacks.patch
  13. 8
      target/linux/adm5120/patches-2.6.26/202-pci_disable_common_quirks.patch
  14. 2
      target/linux/adm5120/patches-2.6.26/203-gpio_leds_brightness.patch
  15. 4
      target/linux/adm5120/patches-2.6.26/310-adm5120_wdt.patch
  16. 8
      target/linux/ar7/patches-2.6.26/100-board_support.patch
  17. 6
      target/linux/ar7/patches-2.6.26/110-flash.patch
  18. 4
      target/linux/ar7/patches-2.6.26/120-gpio_chrdev.patch
  19. 4
      target/linux/ar7/patches-2.6.26/130-vlynq.patch
  20. 2
      target/linux/ar7/patches-2.6.26/150-cpmac_not_broken.patch
  21. 8
      target/linux/ar7/patches-2.6.26/200-mtd_fixes.patch
  22. 4
      target/linux/ar7/patches-2.6.26/500-serial_kludge.patch
  23. 10
      target/linux/ar7/patches-2.6.26/900-cpmac_multiqueue.patch
  24. 4
      target/linux/ar7/patches-2.6.26/900-temporary_cpmac_hack.diff
  25. 6
      target/linux/ar71xx/patches-2.6.26/001-ar71xx_core.patch
  26. 2
      target/linux/ar71xx/patches-2.6.26/002-ar71xx_pci.patch
  27. 10
      target/linux/ar71xx/patches-2.6.26/003-ar71xx_usb_host.patch
  28. 4
      target/linux/ar71xx/patches-2.6.26/004-ar71xx_spi_controller.patch
  29. 2
      target/linux/ar71xx/patches-2.6.26/005-ar71xx_mac_driver.patch
  30. 4
      target/linux/ar71xx/patches-2.6.26/006-ar71xx_wdt_driver.patch
  31. 2
      target/linux/ar71xx/patches-2.6.26/100-mtd_pm25lv_flash_support.patch
  32. 4
      target/linux/ar71xx/patches-2.6.26/101-ksz8041_phy_driver.patch
  33. 4
      target/linux/ar71xx/patches-2.6.26/140-redboot_partition_scan.patch
  34. 4
      target/linux/ar71xx/patches-2.6.26/200-rb4xx_nand_driver.patch
  35. 4
      target/linux/ar71xx/patches-2.6.26/300-mips_fw_myloader.patch
  36. 4
      target/linux/ar71xx/patches-2.6.26/900-mips_multi_machine_support.patch
  37. 4
      target/linux/ar71xx/patches-2.6.26/901-get_c0_compare_irq_function.patch
  38. 8
      target/linux/ar71xx/patches-2.6.26/902-mips_clocksource_init_war.patch
  39. 6
      target/linux/atheros/patches-2.6.26/100-board.patch
  40. 4
      target/linux/atheros/patches-2.6.26/110-spiflash.patch
  41. 4
      target/linux/atheros/patches-2.6.26/120-watchdog.patch
  42. 4
      target/linux/atheros/patches-2.6.26/130-ar2313_ethernet.patch
  43. 2
      target/linux/atheros/patches-2.6.26/135-ar2313_2.6.26.patch
  44. 4
      target/linux/atheros/patches-2.6.26/140-redboot_partition_scan.patch
  45. 4
      target/linux/atheros/patches-2.6.26/150-bridge-printk.patch
  46. 2
      target/linux/atheros/patches-2.6.26/900-cevt_r4k_irq_disable_hazard.patch
  47. 6
      target/linux/atheros/patches-2.6.26/901-get_c0_compare_irq_function.patch
  48. 12
      target/linux/generic-2.6/patches-2.6.26/001-squashfs.patch
  49. 2
      target/linux/generic-2.6/patches-2.6.26/002-lzma_decompress.patch
  50. 10
      target/linux/generic-2.6/patches-2.6.26/003-squashfs_lzma.patch
  51. 2
      target/linux/generic-2.6/patches-2.6.26/004-extra_optimization.patch
  52. 2
      target/linux/generic-2.6/patches-2.6.26/005-squashfs_fix.patch
  53. 2
      target/linux/generic-2.6/patches-2.6.26/006-gcc4_inline_fix.patch
  54. 2
      target/linux/generic-2.6/patches-2.6.26/007-samsung_flash.patch
  55. 16
      target/linux/generic-2.6/patches-2.6.26/009-revert_intel_flash_breakage.patch
  56. 14
      target/linux/generic-2.6/patches-2.6.26/060-block2mtd_init.patch
  57. 44
      target/linux/generic-2.6/patches-2.6.26/065-rootfs_split.patch
  58. 2
      target/linux/generic-2.6/patches-2.6.26/070-redboot_space.patch
  59. 8
      target/linux/generic-2.6/patches-2.6.26/071-redboot_boardconfig.patch
  60. 4
      target/linux/generic-2.6/patches-2.6.26/080-mtd_plat_nand_chip_fixup.patch
  61. 10
      target/linux/generic-2.6/patches-2.6.26/100-netfilter_layer7_2.17.patch
  62. 10
      target/linux/generic-2.6/patches-2.6.26/101-netfilter_layer7_pktmatch.patch
  63. 4
      target/linux/generic-2.6/patches-2.6.26/110-ipp2p_0.8.1rc1.patch
  64. 6
      target/linux/generic-2.6/patches-2.6.26/130-netfilter_ipset.patch
  65. 4
      target/linux/generic-2.6/patches-2.6.26/140-netfilter_time.patch
  66. 18
      target/linux/generic-2.6/patches-2.6.26/150-netfilter_imq.patch
  67. 12
      target/linux/generic-2.6/patches-2.6.26/170-netfilter_chaostables_0.8.patch
  68. 4
      target/linux/generic-2.6/patches-2.6.26/171-netfilter_tarpit.patch
  69. 4
      target/linux/generic-2.6/patches-2.6.26/180-netfilter_depends.patch
  70. 8
      target/linux/generic-2.6/patches-2.6.26/190-netfilter_rtsp.patch
  71. 6
      target/linux/generic-2.6/patches-2.6.26/200-sched_esfq.patch
  72. 2
      target/linux/generic-2.6/patches-2.6.26/202-mips-freestanding.patch
  73. 22
      target/linux/generic-2.6/patches-2.6.26/204-jffs2_eofdetect.patch
  74. 8
      target/linux/generic-2.6/patches-2.6.26/208-rtl8110sb_fix.patch
  75. 4
      target/linux/generic-2.6/patches-2.6.26/209-mini_fo.patch
  76. 16
      target/linux/generic-2.6/patches-2.6.26/210-mini_fo_2.6.25_fixes.patch
  77. 8
      target/linux/generic-2.6/patches-2.6.26/211-mini_fo_2.6.25_dentry_open_war.patch
  78. 8
      target/linux/generic-2.6/patches-2.6.26/212-mini_fo_2.6.26_fixes.patch
  79. 6
      target/linux/generic-2.6/patches-2.6.26/213-kobject_uevent.patch
  80. 2
      target/linux/generic-2.6/patches-2.6.26/220-sound_kconfig.patch
  81. 4
      target/linux/generic-2.6/patches-2.6.26/400-ledtrig_morse.patch
  82. 4
      target/linux/generic-2.6/patches-2.6.26/401-led_alix.patch
  83. 4
      target/linux/generic-2.6/patches-2.6.26/402-ledtrig_netdev.patch
  84. 4
      target/linux/generic-2.6/patches-2.6.26/410-gpio_buttons.patch
  85. 4
      target/linux/generic-2.6/patches-2.6.26/420-gpiodev.patch
  86. 4
      target/linux/generic-2.6/patches-2.6.26/510-yaffs_support.patch
  87. 10
      target/linux/generic-2.6/patches-2.6.26/512-yaffs_2.6.25_fix.patch
  88. 14
      target/linux/generic-2.6/patches-2.6.26/513-yaffs_2.6.26_fix.patch
  89. 8
      target/linux/generic-2.6/patches-2.6.26/600-phy_extension.patch
  90. 4
      target/linux/generic-2.6/patches-2.6.26/610-phy_detect.patch
  91. 4
      target/linux/generic-2.6/patches-2.6.26/620-phy_adm6996.patch
  92. 8
      target/linux/generic-2.6/patches-2.6.26/630-phy_packets.patch
  93. 6
      target/linux/generic-2.6/patches-2.6.26/640-mvswitch.patch
  94. 6
      target/linux/generic-2.6/patches-2.6.26/801-usb_serial_endpoint_size.patch
  95. 2
      target/linux/generic-2.6/patches-2.6.26/840-unable_to_open_console.patch
  96. 4
      target/linux/generic-2.6/patches-2.6.26/900-headers_type_and_time.patch
  97. 2
      target/linux/generic-2.6/patches-2.6.26/902-darwin_scripts_include.patch
  98. 14
      target/linux/generic-2.6/patches-2.6.26/903-hostap_txpower.patch
  99. 4
      target/linux/generic-2.6/patches-2.6.26/903-stddef_include.patch
  100. 240
      target/linux/generic-2.6/patches-2.6.26/910-cryptodev_backport.patch
  101. Some files were not shown because too many files have changed in this diff Show More

@ -1,6 +1,6 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -18,6 +18,21 @@
@@ -18,6 +18,21 @@ choice
prompt "System type"
default SGI_IP22
@ -22,7 +22,7 @@
config MACH_ALCHEMY
bool "Alchemy processor based machines"
@@ -687,6 +702,7 @@
@@ -687,6 +702,7 @@ config WR_PPMC
endchoice
@ -32,7 +32,7 @@
source "arch/mips/jazz/Kconfig"
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -174,6 +174,21 @@
@@ -174,6 +174,21 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#

@ -1,6 +1,6 @@
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -586,5 +586,9 @@
@@ -586,5 +586,9 @@ config MTD_PLATRAM
This selection automatically selects the map_ram driver.
@ -12,7 +12,7 @@
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -44,6 +44,7 @@
@@ -44,6 +44,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o

@ -1,6 +1,6 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -613,6 +613,10 @@
@@ -613,6 +613,10 @@ config MIPS_AU1X00_ENET
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
@ -13,7 +13,7 @@
depends on PCI && SGI_IP27
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -186,6 +186,7 @@
@@ -186,6 +186,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o

@ -13,7 +13,7 @@
depends on USB
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -10,6 +10,7 @@
@@ -10,6 +10,7 @@ isp1760-objs := isp1760-hcd.o isp1760-if
obj-$(CONFIG_PCI) += pci-quirks.o
@ -23,7 +23,7 @@
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -16,6 +16,7 @@
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/

@ -1,6 +1,6 @@
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -48,3 +48,4 @@
@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o

@ -1,6 +1,6 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -207,4 +207,12 @@
@@ -207,4 +207,12 @@ config LEDS_TRIGGER_NETDEV
This allows LEDs to be controlled by network device activity.
If unsure, say Y.
@ -15,7 +15,7 @@
endif # NEW_LEDS
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -30,3 +30,4 @@
@@ -30,3 +30,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) +=
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o

@ -1,6 +1,6 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -174,6 +174,22 @@
@@ -174,6 +174,22 @@ config MTD_AR7_PARTS
---help---
TI AR7 partitioning support
@ -25,7 +25,7 @@
config MTD_CHAR
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -13,6 +13,7 @@
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o

@ -20,7 +20,7 @@
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -243,6 +250,41 @@
@@ -243,6 +250,41 @@ static void fixup_s29gl032n_sectors(stru
}
}
@ -62,7 +62,7 @@
static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
#ifdef AMD_BOOTLOC_BUG
@@ -278,6 +320,9 @@
@@ -278,6 +320,9 @@ static struct cfi_fixup fixup_table[] =
*/
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
@ -74,7 +74,7 @@
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -196,6 +196,14 @@
@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
provides support for one of those command sets, used on chips
including the AMD Am29LV320.

@ -11,7 +11,7 @@
#define PM49FL002 0x006D
#define PM49FL004 0x006E
#define PM49FL008 0x006A
@@ -1173,6 +1177,54 @@
@@ -1173,6 +1177,54 @@ static const struct amd_flash_info jedec
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1),
}

@ -1,6 +1,6 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -57,6 +57,11 @@
@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
depends on MTD_PARTITIONS
default y
@ -14,7 +14,7 @@
depends on MTD_PARTITIONS
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -8,6 +8,7 @@
@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o

@ -1,6 +1,6 @@
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -72,6 +72,7 @@
@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
@ -10,7 +10,7 @@
# Should be last but one libata driver
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -566,6 +566,15 @@
@@ -566,6 +566,15 @@ config PATA_RADISYS
If unsure, say N.

@ -14,7 +14,7 @@
#define AMBA_ISR_PASS_LIMIT 256
@@ -82,9 +81,9 @@
@@ -82,9 +81,9 @@ static void pl010_stop_tx(struct uart_po
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
@ -26,7 +26,7 @@
}
static void pl010_start_tx(struct uart_port *port)
@@ -92,9 +91,9 @@
@@ -92,9 +91,9 @@ static void pl010_start_tx(struct uart_p
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
@ -38,7 +38,7 @@
}
static void pl010_stop_rx(struct uart_port *port)
@@ -102,9 +101,9 @@
@@ -102,9 +101,9 @@ static void pl010_stop_rx(struct uart_po
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
@ -50,7 +50,7 @@
}
static void pl010_enable_ms(struct uart_port *port)
@@ -112,9 +111,9 @@
@@ -112,9 +111,9 @@ static void pl010_enable_ms(struct uart_
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
@ -62,7 +62,7 @@
}
static void pl010_rx_chars(struct uart_amba_port *uap)
@@ -122,9 +121,9 @@
@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
struct tty_struct *tty = uap->port.info->tty;
unsigned int status, ch, flag, rsr, max_count = 256;
@ -74,7 +74,7 @@
flag = TTY_NORMAL;
uap->port.icount.rx++;
@@ -133,9 +132,9 @@
@@ -133,9 +132,9 @@ static void pl010_rx_chars(struct uart_a
* Note that the error handling code is
* out of the main execution path
*/
@ -86,7 +86,7 @@
if (rsr & UART01x_RSR_BE) {
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
@@ -165,7 +164,7 @@
@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
@ -95,7 +95,7 @@
}
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
@@ -178,7 +177,7 @@
@@ -178,7 +177,7 @@ static void pl010_tx_chars(struct uart_a
int count;
if (uap->port.x_char) {
@ -104,7 +104,7 @@
uap->port.icount.tx++;
uap->port.x_char = 0;
return;
@@ -190,7 +189,7 @@
@@ -190,7 +189,7 @@ static void pl010_tx_chars(struct uart_a
count = uap->port.fifosize >> 1;
do {
@ -113,7 +113,7 @@
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
uap->port.icount.tx++;
if (uart_circ_empty(xmit))
@@ -208,9 +207,9 @@
@@ -208,9 +207,9 @@ static void pl010_modem_status(struct ua
{
unsigned int status, delta;
@ -125,7 +125,7 @@
delta = status ^ uap->old_status;
uap->old_status = status;
@@ -238,7 +237,7 @@
@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
spin_lock(&uap->port.lock);
@ -134,7 +134,7 @@
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
@@ -251,7 +250,7 @@
@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
if (pass_counter-- == 0)
break;
@ -143,7 +143,7 @@
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
@@ -265,7 +264,7 @@
@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
static unsigned int pl010_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@ -152,7 +152,7 @@
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
@@ -275,7 +274,7 @@
@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
unsigned int result = 0;
unsigned int status;
@ -161,7 +161,7 @@
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
@@ -301,12 +300,12 @@
@@ -301,12 +300,12 @@ static void pl010_break_ctl(struct uart_
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
@ -176,7 +176,7 @@
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -334,12 +333,12 @@
@@ -334,12 +333,12 @@ static int pl010_startup(struct uart_por
/*
* initialise the old status of the modem signals
*/
@ -191,7 +191,7 @@
uap->port.membase + UART010_CR);
return 0;
@@ -362,10 +361,10 @@
@@ -362,10 +361,10 @@ static void pl010_shutdown(struct uart_p
/*
* disable all interrupts, disable the port
*/
@ -204,7 +204,7 @@
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
uap->port.membase + UART010_LCRH);
@@ -387,7 +386,7 @@
@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
/*
* Ask the core to calculate the divisor for us.
*/
@ -213,7 +213,7 @@
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
@@ -450,25 +449,25 @@
@@ -450,25 +449,25 @@ pl010_set_termios(struct uart_port *port
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
/* first, disable everything */
@ -245,7 +245,7 @@
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -540,7 +539,7 @@
@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
.verify_port = pl010_verify_port,
};
@ -254,7 +254,7 @@
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
@@ -550,10 +549,10 @@
@@ -550,10 +549,10 @@ static void pl010_console_putchar(struct
unsigned int status;
do {
@ -267,7 +267,7 @@
}
static void
@@ -567,8 +566,8 @@
@@ -567,8 +566,8 @@ pl010_console_write(struct console *co,
/*
* First save the CR then disable the interrupts
*/
@ -278,7 +278,7 @@
uart_console_write(&uap->port, s, count, pl010_console_putchar);
@@ -577,10 +576,10 @@
@@ -577,10 +576,10 @@ pl010_console_write(struct console *co,
* and restore the TCR
*/
do {
@ -291,7 +291,7 @@
clk_disable(uap->clk);
}
@@ -589,9 +588,9 @@
@@ -589,9 +588,9 @@ static void __init
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
@ -303,7 +303,7 @@
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -606,8 +605,8 @@
@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
else
*bits = 8;
@ -314,7 +314,7 @@
*baud = uap->port.uartclk / (16 * (quot + 1));
}
}
@@ -625,7 +624,7 @@
@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
* if so, search for the first available port that does have
* console support.
*/
@ -323,7 +323,7 @@
co->index = 0;
uap = amba_ports[co->index];
if (!uap)
@@ -643,7 +642,7 @@
@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
static struct uart_driver amba_reg;
static struct console amba_console = {
@ -332,7 +332,7 @@
.write = pl010_console_write,
.device = uart_console_device,
.setup = pl010_console_setup,
@@ -659,11 +658,11 @@
@@ -659,11 +658,11 @@ static struct console amba_console = {
static struct uart_driver amba_reg = {
.owner = THIS_MODULE,
@ -349,7 +349,7 @@
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -287,10 +287,25 @@
@@ -287,10 +287,25 @@ config SERIAL_AMBA_PL010
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
an Integrator/AP or Integrator/PP2 platform, or if you have a

@ -1,6 +1,6 @@
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -42,6 +42,12 @@
@@ -42,6 +42,12 @@ config PCI_DEBUG
When in doubt, say N.
@ -23,7 +23,7 @@
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
@@ -1495,6 +1496,7 @@
@@ -1495,6 +1496,7 @@ static void __devinit fixup_rev1_53c810(
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
@ -31,7 +31,7 @@
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
@@ -1561,6 +1563,7 @@
@@ -1561,6 +1563,7 @@ void pci_fixup_device(enum pci_fixup_pas
}
EXPORT_SYMBOL(pci_fixup_device);
@ -39,7 +39,7 @@
/* Enable 1k I/O space granularity on the Intel P64H2 */
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
@@ -1934,3 +1937,4 @@
@@ -1934,3 +1937,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
quirk_msi_intx_disable_bug);
#endif /* CONFIG_PCI_MSI */

@ -1,6 +1,6 @@
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -43,13 +43,17 @@
@@ -43,13 +43,17 @@ static void gpio_led_set(struct led_clas
container_of(led_cdev, struct gpio_led_data, cdev);
int level;

@ -1,6 +1,6 @@
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -632,6 +632,18 @@
@@ -632,6 +632,18 @@ config SBC_EPX_C3_WATCHDOG
# MIPS Architecture
@ -21,7 +21,7 @@
depends on SGI_HAS_INDYDOG
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -91,6 +91,7 @@
@@ -91,6 +91,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
# M68KNOMMU Architecture
# MIPS Architecture

@ -1,6 +1,6 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -18,6 +18,23 @@
@@ -18,6 +18,23 @@ choice
prompt "System type"
default SGI_IP22
@ -26,7 +26,7 @@
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1188,9 +1188,22 @@
@@ -1188,9 +1188,22 @@ void *set_except_vector(int n, void *add
exception_handlers[n] = handler;
if (n == 0 && cpu_has_divec) {
@ -54,7 +54,7 @@
}
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -167,6 +167,13 @@
@@ -167,6 +167,13 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s
#
#
@ -70,7 +70,7 @@
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -182,8 +182,10 @@
@@ -182,8 +182,10 @@ typedef struct { unsigned long pgprot; }
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)

@ -1,6 +1,6 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -174,6 +174,12 @@
@@ -174,6 +174,12 @@ config MTD_AR7_PARTS
---help---
TI AR7 partitioning support
@ -15,7 +15,7 @@
config MTD_CHAR
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -13,6 +13,7 @@
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
@ -25,7 +25,7 @@
obj-$(CONFIG_MTD_CHAR) += mtdchar.o
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -87,7 +87,8 @@
@@ -87,7 +87,8 @@ static int physmap_flash_remove(struct p
static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
#ifdef CONFIG_MTD_PARTITIONS

@ -1,6 +1,6 @@
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -960,6 +960,15 @@
@@ -960,6 +960,15 @@ config MWAVE
To compile this driver as a module, choose M here: the
module will be called mwave.
@ -18,7 +18,7 @@
depends on SCx200
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -91,6 +91,7 @@
@@ -91,6 +91,7 @@ obj-$(CONFIG_COBALT_LCD) += lcd.o
obj-$(CONFIG_PPDEV) += ppdev.o
obj-$(CONFIG_NWBUTTON) += nwbutton.o
obj-$(CONFIG_NWFLASH) += nwflash.o

@ -1,6 +1,6 @@
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -100,5 +100,7 @@
@@ -100,5 +100,7 @@ source "drivers/auxdisplay/Kconfig"
source "drivers/uio/Kconfig"
@ -10,7 +10,7 @@
endmenu
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -92,5 +92,6 @@
@@ -92,5 +92,6 @@ obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/

@ -1,6 +1,6 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1867,7 +1867,7 @@
@@ -1867,7 +1867,7 @@ config SC92031
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"

@ -11,7 +11,7 @@
struct ar7_bin_rec {
unsigned int checksum;
unsigned int length;
@@ -47,7 +51,8 @@
@@ -47,7 +51,8 @@ static int create_mtd_partitions(struct
unsigned long origin)
{
struct ar7_bin_rec header;
@ -21,7 +21,7 @@
unsigned int pre_size = master->erasesize, post_size = 0;
unsigned int root_offset = ROOT_OFFSET;
@@ -66,7 +71,7 @@
@@ -66,7 +71,7 @@ static int create_mtd_partitions(struct
do { /* Try 10 blocks starting from master->erasesize */
offset = pre_size;
master->read(master, offset,
@ -30,7 +30,7 @@
if (!strncmp((char *)&header, "TIENV0.8", 8))
ar7_parts[1].offset = pre_size;
if (header.checksum == LOADER_MAGIC1)
@@ -88,7 +93,7 @@
@@ -88,7 +93,7 @@ static int create_mtd_partitions(struct
while (header.length) {
offset += sizeof(header) + header.length;
master->read(master, offset, sizeof(header),
@ -39,7 +39,7 @@
}
root_offset = offset + sizeof(header) + 4;
break;
@@ -96,10 +101,10 @@
@@ -96,10 +101,10 @@ static int create_mtd_partitions(struct
while (header.length) {
offset += sizeof(header) + header.length;
master->read(master, offset, sizeof(header),

@ -1,6 +1,6 @@
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -266,6 +266,13 @@
@@ -266,6 +266,13 @@ static const struct serial8250_config ua
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO,
},
@ -14,7 +14,7 @@
};
#if defined (CONFIG_SERIAL_8250_AU1X00)
@@ -2524,7 +2531,11 @@
@@ -2524,7 +2531,11 @@ static void serial8250_console_putchar(s
{
struct uart_8250_port *up = (struct uart_8250_port *)port;

@ -19,7 +19,7 @@ because other drivers do it in the same way.
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -627,7 +627,7 @@
@@ -627,7 +627,7 @@ static void cpmac_end_xmit(struct net_de
dev_kfree_skb_irq(desc->skb);
desc->skb = NULL;
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
@ -28,7 +28,7 @@ because other drivers do it in the same way.
netif_wake_subqueue(dev, queue);
#else
if (netif_queue_stopped(dev))
@@ -638,7 +638,7 @@
@@ -638,7 +638,7 @@ static void cpmac_end_xmit(struct net_de
printk(KERN_WARNING
"%s: end_xmit: spurious interrupt\n", dev->name);
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
@ -37,7 +37,7 @@ because other drivers do it in the same way.
netif_wake_subqueue(dev, queue);
#else
if (netif_queue_stopped(dev))
@@ -1124,7 +1124,7 @@
@@ -1124,7 +1124,7 @@ static int external_switch;
static int __devinit cpmac_probe(struct platform_device *pdev)
{
@ -46,7 +46,7 @@ because other drivers do it in the same way.
char *mdio_bus_id = "0";
struct resource *mem;
struct cpmac_priv *priv;
@@ -1152,7 +1152,11 @@
@@ -1152,7 +1152,11 @@ static int __devinit cpmac_probe(struct
}
}
@ -58,7 +58,7 @@ because other drivers do it in the same way.
if (!dev) {
printk(KERN_ERR "cpmac: Unable to allocate net_device\n");
@@ -1179,7 +1183,9 @@
@@ -1179,7 +1183,9 @@ static int __devinit cpmac_probe(struct
dev->set_multicast_list = cpmac_set_multicast_list;
dev->tx_timeout = cpmac_tx_timeout;
dev->ethtool_ops = &cpmac_ethtool_ops;

@ -1,6 +1,6 @@
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -948,7 +948,8 @@
@@ -948,7 +948,8 @@ static void cpmac_adjust_link(struct net
int new_state = 0;
spin_lock(&priv->lock);
@ -10,7 +10,7 @@
netif_start_queue(dev);
if (priv->phy->duplex != priv->oldduplex) {
new_state = 1;
@@ -960,11 +961,11 @@
@@ -960,11 +961,11 @@ static void cpmac_adjust_link(struct net
priv->oldspeed = priv->phy->speed;
}

@ -1,6 +1,6 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -597,6 +597,13 @@
@@ -597,6 +597,13 @@ core-$(CONFIG_TOSHIBA_RBTX4938) += arch/
cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
@ -35,7 +35,7 @@
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -21,6 +21,24 @@
@@ -21,6 +21,24 @@ choice
config MACH_ALCHEMY
bool "Alchemy processor based machines"
@ -60,7 +60,7 @@
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
@@ -687,6 +705,7 @@
@@ -687,6 +705,7 @@ config WR_PPMC
endchoice

@ -1,6 +1,6 @@
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -15,6 +15,7 @@
@@ -15,6 +15,7 @@ obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o

@ -1,6 +1,6 @@
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -81,6 +81,12 @@
@@ -81,6 +81,12 @@ config USB_EHCI_BIG_ENDIAN_DESC
depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
default y
@ -13,7 +13,7 @@
config USB_EHCI_FSL
bool "Support for Freescale on-chip EHCI USB controller"
depends on USB_EHCI_HCD && FSL_SOC
@@ -152,6 +158,12 @@
@@ -152,6 +158,12 @@ config USB_OHCI_HCD
To compile this driver as a module, choose M here: the
module will be called ohci-hcd.
@ -28,7 +28,7 @@
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1034,6 +1034,11 @@
@@ -1034,6 +1034,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ixp4xx_ehci_driver
#endif
@ -42,7 +42,7 @@
#error "missing bus glue for ehci-hcd"
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -538,6 +538,11 @@
@@ -538,6 +538,11 @@ static inline struct usb_hcd *ohci_to_hc
#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
#endif
@ -56,7 +56,7 @@
{
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1057,6 +1057,11 @@
@@ -1057,6 +1057,11 @@ MODULE_LICENSE ("GPL");
#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
#endif

@ -1,6 +1,6 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -52,6 +52,13 @@
@@ -52,6 +52,13 @@ config SPI_MASTER
comment "SPI Master Controller Drivers"
depends on SPI_MASTER
@ -16,7 +16,7 @@
depends on (ARCH_AT91 || AVR32) && SPI_MASTER
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,6 +11,7 @@
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_SPI_MASTER) += spi.o
# SPI master controller drivers (bus)

@ -1,6 +1,6 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2060,6 +2060,8 @@
@@ -2060,6 +2060,8 @@ config ACENIC_OMIT_TIGON_I
The safe and default value for this is N.

@ -1,6 +1,6 @@
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -683,6 +683,13 @@
@@ -683,6 +683,13 @@ config TXX9_WDT
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
@ -16,7 +16,7 @@
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -97,6 +97,7 @@
@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o

@ -1,6 +1,6 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -455,6 +455,10 @@
@@ -455,6 +455,10 @@ static struct flash_info __devinitdata m
{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
{ "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },

@ -1,6 +1,6 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -76,6 +76,11 @@
@@ -82,6 +82,11 @@ config MVSWITCH_PHY
---help---
Currently supports the Marvell 88E6060 switch.
@ -14,7 +14,7 @@
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -15,5 +15,6 @@
@@ -16,5 +16,6 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o

@ -1,6 +1,6 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -62,31 +62,32 @@
@@ -62,31 +62,32 @@ static int parse_redboot_partitions(stru
static char nullstring[] = "unallocated";
#endif
@ -40,7 +40,7 @@
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
@@ -158,6 +159,11 @@
@@ -158,6 +159,11 @@ static int parse_redboot_partitions(stru
}
if (i == numslots) {
/* Didn't find it */

@ -1,6 +1,6 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -386,4 +386,8 @@
@@ -386,4 +386,8 @@ config MTD_NAND_FSL_UPM
Enables support for NAND Flash chips wired onto Freescale PowerPC
processor localbus with User-Programmable Machine support.
@ -11,7 +11,7 @@
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -29,6 +29,7 @@
@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o

@ -1,6 +1,6 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -158,6 +158,7 @@
@@ -158,6 +158,7 @@ endif
#
libs-$(CONFIG_ARC) += arch/mips/fw/arc/
libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
@ -10,7 +10,7 @@
libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -874,6 +874,9 @@
@@ -874,6 +874,9 @@ config MIPS_NILE4
config MIPS_DISABLE_OBSOLETE_IDE
bool

@ -113,7 +113,7 @@
+
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -86,6 +86,7 @@
@@ -86,6 +86,7 @@ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
@ -123,7 +123,7 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -880,6 +880,9 @@
@@ -880,6 +880,9 @@ config MYLOADER
config SYNC_R4K
bool

@ -8,7 +8,7 @@
extern asmlinkage void handle_int(void);
extern asmlinkage void handle_tlbm(void);
@@ -1464,6 +1465,8 @@
@@ -1464,6 +1465,8 @@ void __cpuinit per_cpu_trap_init(void)
*/
if (cpu_has_mips_r2) {
cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
@ -19,7 +19,7 @@
cp0_perfcount_irq = -1;
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -53,6 +53,7 @@
@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
#ifdef CONFIG_CEVT_R4K
extern int mips_clockevent_init(void);
extern unsigned int __weak get_c0_compare_int(void);

@ -23,7 +23,7 @@
static int mips_next_event(unsigned long delta,
struct clock_event_device *evt)
{
@@ -28,6 +44,7 @@
@@ -28,6 +44,7 @@ static int mips_next_event(unsigned long
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
@ -31,7 +31,7 @@
res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
#ifdef CONFIG_MIPS_MT_SMTC
evpe(vpflags);
@@ -187,7 +204,7 @@
@@ -187,7 +204,7 @@ static int c0_compare_int_usable(void)
*/
if (c0_compare_int_pending()) {
write_c0_compare(read_c0_count());
@ -40,7 +40,7 @@
if (c0_compare_int_pending())
return 0;
}
@@ -196,7 +213,7 @@
@@ -196,7 +213,7 @@ static int c0_compare_int_usable(void)
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
@ -49,7 +49,7 @@
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
@@ -205,11 +222,12 @@
@@ -205,11 +222,12 @@ static int c0_compare_int_usable(void)
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */

@ -1,6 +1,6 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -59,6 +59,18 @@
@@ -59,6 +59,18 @@ config BCM47XX
help
Support for BCM47XX based boards
@ -19,7 +19,7 @@
config MIPS_COBALT
bool "Cobalt Server"
select CEVT_R4K
@@ -687,6 +699,7 @@
@@ -687,6 +699,7 @@ config WR_PPMC
endchoice
@ -29,7 +29,7 @@
source "arch/mips/jazz/Kconfig"
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -276,6 +276,13 @@
@@ -276,6 +276,13 @@ libs-$(CONFIG_MIPS_XXS1500) += arch/mips
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
#

@ -1,6 +1,6 @@
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -84,6 +84,10 @@
@@ -84,6 +84,10 @@ config M25PXX_USE_FAST_READ
help
This option enables FAST_READ access supported by ST M25Pxx.
@ -13,7 +13,7 @@
help
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -17,3 +17,4 @@
@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o

@ -1,6 +1,6 @@
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -683,6 +683,12 @@
@@ -683,6 +683,12 @@ config TXX9_WDT
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
@ -15,7 +15,7 @@
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -97,6 +97,7 @@
@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o

@ -1,6 +1,6 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -367,6 +367,12 @@
@@ -367,6 +367,12 @@ config AX88796_93CX6
help
Select this if your platform comes with an external 93CX6 eeprom.
@ -15,7 +15,7 @@
depends on PPC_PMAC && PPC32
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -194,6 +194,7 @@
@@ -194,6 +194,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o

@ -1,6 +1,6 @@
--- a/drivers/net/ar2313/ar2313.c
+++ b/drivers/net/ar2313/ar2313.c
@@ -291,7 +291,7 @@
@@ -291,7 +291,7 @@ int __init ar2313_probe(struct platform_
sp->mii_bus.write = mdiobus_write;
sp->mii_bus.reset = mdiobus_reset;
sp->mii_bus.name = "ar2313_eth_mii";

@ -1,6 +1,6 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -62,31 +62,32 @@
@@ -62,31 +62,32 @@ static int parse_redboot_partitions(stru
static char nullstring[] = "unallocated";
#endif
@ -40,7 +40,7 @@
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
@@ -158,6 +159,11 @@
@@ -158,6 +159,11 @@ static int parse_redboot_partitions(stru
}
if (i == numslots) {
/* Didn't find it */

@ -1,6 +1,6 @@
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3786,8 +3786,8 @@
@@ -3786,8 +3786,8 @@ int register_netdevice(struct net_device
/* Fix illegal SG+CSUM combinations. */
if ((dev->features & NETIF_F_SG) &&
!(dev->features & NETIF_F_ALL_CSUM)) {
@ -11,7 +11,7 @@
dev->features &= ~NETIF_F_SG;
}
@@ -3800,9 +3800,9 @@
@@ -3800,9 +3800,9 @@ int register_netdevice(struct net_device
}
if (dev->features & NETIF_F_UFO) {
if (!(dev->features & NETIF_F_HW_CSUM)) {

@ -1,6 +1,6 @@
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -205,6 +205,7 @@
@@ -205,6 +205,7 @@ static int c0_compare_int_usable(void)
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */

@ -8,7 +8,7 @@
extern asmlinkage void handle_int(void);
extern asmlinkage void handle_tlbm(void);
@@ -1464,6 +1465,8 @@
@@ -1464,6 +1465,8 @@ void __cpuinit per_cpu_trap_init(void)
*/
if (cpu_has_mips_r2) {
cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
@ -19,7 +19,7 @@
cp0_perfcount_irq = -1;
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -53,6 +53,7 @@
@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
#ifdef CONFIG_CEVT_R4K
extern int mips_clockevent_init(void);
extern unsigned int __weak get_c0_compare_int(void);
@ -29,7 +29,7 @@
{
--- a/arch/mips/atheros/board.c
+++ b/arch/mips/atheros/board.c
@@ -205,6 +205,11 @@
@@ -265,6 +265,11 @@ void (*board_time_init)(void);
void __init plat_time_init(void) {
board_time_init();
}

@ -1,6 +1,6 @@
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1395,6 +1395,71 @@
@@ -1395,6 +1395,71 @@ config CRAMFS
If unsure, say N.
@ -74,7 +74,7 @@
depends on BLOCK
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -73,6 +73,7 @@
@@ -73,6 +73,7 @@ obj-$(CONFIG_JBD) += jbd/
obj-$(CONFIG_JBD2) += jbd2/
obj-$(CONFIG_EXT2_FS) += ext2/
obj-$(CONFIG_CRAMFS) += cramfs/
@ -4128,7 +4128,7 @@
#include <linux/initrd.h>
#include <linux/string.h>
@@ -39,6 +40,7 @@
@@ -39,6 +40,7 @@ static int __init crd_load(int in_fd, in
* numbers could not be found.
*
* We currently check for the following magic numbers:
@ -4136,7 +4136,7 @@
* minix
* ext2
* romfs
@@ -53,6 +55,7 @@
@@ -53,6 +55,7 @@ identify_ramdisk_image(int fd, int start
struct ext2_super_block *ext2sb;
struct romfs_super_block *romfsb;
struct cramfs_super *cramfsb;
@ -4144,7 +4144,7 @@
int nblocks = -1;
unsigned char *buf;
@@ -64,6 +67,7 @@
@@ -64,6 +67,7 @@ identify_ramdisk_image(int fd, int start
ext2sb = (struct ext2_super_block *) buf;
romfsb = (struct romfs_super_block *) buf;
cramfsb = (struct cramfs_super *) buf;
@ -4152,7 +4152,7 @@
memset(buf, 0xe5, size);
/*
@@ -101,6 +105,15 @@
@@ -101,6 +105,15 @@ identify_ramdisk_image(int fd, int start
goto done;
}

@ -769,7 +769,7 @@
+}
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -14,7 +14,7 @@
@@ -14,7 +14,7 @@ lib-$(CONFIG_SMP) += cpumask.o
lib-y += kobject.o kref.o klist.o
obj-y += div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \

@ -38,7 +38,7 @@
static void squashfs_put_super(struct super_block *);
static int squashfs_statfs(struct dentry *, struct kstatfs *);
static int squashfs_symlink_readpage(struct file *file, struct page *page);
@@ -64,7 +81,11 @@
@@ -64,7 +81,11 @@ static int squashfs_get_sb(struct file_s
const char *, void *, struct vfsmount *);
@ -50,7 +50,7 @@
static struct file_system_type squashfs_fs_type = {
.owner = THIS_MODULE,
@@ -249,6 +270,15 @@
@@ -249,6 +270,15 @@ SQSH_EXTERN unsigned int squashfs_read_d
if (compressed) {
int zlib_err;
@ -66,7 +66,7 @@
stream.next_in = c_buffer;
stream.avail_in = c_byte;
stream.next_out = buffer;
@@ -263,7 +293,7 @@
@@ -263,7 +293,7 @@ SQSH_EXTERN unsigned int squashfs_read_d
bytes = 0;
} else
bytes = stream.total_out;
@ -75,7 +75,7 @@
up(&msblk->read_data_mutex);
}
@@ -2045,15 +2075,19 @@
@@ -2045,15 +2075,19 @@ static int __init init_squashfs_fs(void)
printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) "
"Phillip Lougher\n");
@ -95,7 +95,7 @@
destroy_inodecache();
}
@@ -2064,7 +2098,9 @@
@@ -2064,7 +2098,9 @@ out:
static void __exit exit_squashfs_fs(void)
{

@ -1,6 +1,6 @@
--- a/Makefile
+++ b/Makefile
@@ -537,6 +537,9 @@
@@ -537,6 +537,9 @@ endif
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)

@ -8,7 +8,7 @@
#include <linux/squashfs_fs_sb.h>
#include <linux/squashfs_fs_i.h>
#include <linux/buffer_head.h>
@@ -2125,7 +2126,7 @@
@@ -2125,7 +2126,7 @@ static void squashfs_destroy_inode(struc
}

@ -1,6 +1,6 @@
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -185,7 +185,7 @@
@@ -185,7 +185,7 @@ extern __u64 __xchg_u64_unsupported_on_3
if something tries to do an invalid xchg(). */
extern void __xchg_called_with_bad_pointer(void);

@ -8,7 +8,7 @@
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -324,12 +325,19 @@
@@ -324,12 +325,19 @@ struct mtd_info *cfi_cmdset_0002(struct
if (extp->MajorVersion != '1' ||
(extp->MinorVersion < '0' || extp->MinorVersion > '4')) {

@ -1,6 +1,6 @@
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1010,7 +1010,7 @@
@@ -1010,7 +1010,7 @@ static void __xipram xip_enable(struct m
static int __xipram xip_wait_for_operation(
struct map_info *map, struct flchip *chip,
@ -9,7 +9,7 @@
{
struct cfi_private *cfi = map->fldrv_priv;
struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
@@ -1019,7 +1019,7 @@
@@ -1019,7 +1019,7 @@ static int __xipram xip_wait_for_operati
flstate_t oldstate, newstate;
start = xip_currtime();
@ -18,7 +18,7 @@
if (usec == 0)
usec = 500000;
done = 0;
@@ -1129,8 +1129,8 @@
@@ -1129,8 +1129,8 @@ static int __xipram xip_wait_for_operati
#define XIP_INVAL_CACHED_RANGE(map, from, size) \
INVALIDATE_CACHED_RANGE(map, from, size)
@ -29,7 +29,7 @@
#else
@@ -1142,65 +1142,65 @@
@@ -1142,65 +1142,65 @@ static int __xipram xip_wait_for_operati
static int inval_cache_and_wait_for_operation(
struct map_info *map, struct flchip *chip,
unsigned long cmd_adr, unsigned long inval_adr, int inval_len,
@ -130,7 +130,7 @@
/* Done and happy. */
chip->state = FL_STATUS;
return 0;
@@ -1209,7 +1209,8 @@
@@ -1209,7 +1209,8 @@ static int inval_cache_and_wait_for_oper
#endif
#define WAIT_TIMEOUT(map, chip, adr, udelay) \
@ -140,7 +140,7 @@
static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len)
@@ -1443,7 +1444,7 @@
@@ -1443,7 +1444,7 @@ static int __xipram do_write_oneword(str
ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
adr, map_bankwidth(map),
@ -149,7 +149,7 @@
if (ret) {
xip_enable(map, chip, adr);
printk(KERN_ERR "%s: word write error (status timeout)\n", map->name);
@@ -1683,7 +1684,7 @@
@@ -1683,7 +1684,7 @@ static int __xipram do_write_buffer(stru
ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr,
initial_adr, initial_len,
@ -158,7 +158,7 @@
if (ret) {
map_write(map, CMD(0x70), cmd_adr);
chip->state = FL_STATUS;
@@ -1818,7 +1819,7 @@
@@ -1818,7 +1819,7 @@ static int __xipram do_erase_oneblock(st
ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
adr, len,

@ -8,7 +8,7 @@
#include <linux/buffer_head.h>
#include <linux/mutex.h>
#include <linux/mount.h>
@@ -237,10 +238,11 @@
@@ -237,10 +238,11 @@ static void block2mtd_free_device(struct
/* FIXME: ensure that mtd->size % erase_size == 0 */
@ -21,7 +21,7 @@
if (!devname)
return NULL;
@@ -279,14 +281,18 @@
@@ -279,14 +281,18 @@ static struct block2mtd_dev *add_device(
/* Setup the MTD structure */
/* make the name contain the block device in */
@ -44,7 +44,7 @@
dev->mtd.erasesize = erase_size;
dev->mtd.writesize = 1;
dev->mtd.type = MTD_RAM;
@@ -299,14 +305,17 @@
@@ -299,14 +305,17 @@ static struct block2mtd_dev *add_device(
dev->mtd.priv = dev;
dev->mtd.owner = THIS_MODULE;
@ -65,7 +65,7 @@
return dev;
devinit_err:
@@ -379,9 +388,9 @@
@@ -379,9 +388,9 @@ static char block2mtd_paramline[80 + 12]
static int block2mtd_setup2(const char *val)
{
@ -77,7 +77,7 @@
char *name;
size_t erase_size = PAGE_SIZE;
int i, ret;
@@ -392,7 +401,7 @@
@@ -392,7 +401,7 @@ static int block2mtd_setup2(const char *
strcpy(str, val);
kill_final_newline(str);
@ -86,7 +86,7 @@
token[i] = strsep(&str, ",");
if (str)
@@ -411,8 +420,10 @@
@@ -411,8 +420,10 @@ static int block2mtd_setup2(const char *
parse_err("illegal erase size");
}
}
@ -98,7 +98,7 @@
return 0;
}
@@ -446,7 +457,7 @@
@@ -446,7 +457,7 @@ static int block2mtd_setup(const char *v
module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);

@ -1,6 +1,6 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -47,6 +47,16 @@
@@ -47,6 +47,16 @@ config MTD_PARTITIONS
devices. Partitioning on NFTL 'devices' is a different - that's the
'normal' form of partitioning used on a block device.
@ -28,7 +28,7 @@
/* Our partition linked list */
static LIST_HEAD(mtd_partitions);
@@ -39,7 +41,7 @@
@@ -39,7 +41,7 @@ struct mtd_part {
* the pointer to that structure with this macro.
*/
#define PART(x) ((struct mtd_part *)(x))
@ -37,7 +37,7 @@
/*
* MTD methods which simply translate the effective address and pass through
@@ -322,6 +324,316 @@
@@ -322,6 +324,316 @@ int del_mtd_partitions(struct mtd_info *
return 0;
}
@ -354,7 +354,7 @@
/*
* This function, given a master MTD object and a partition table, creates
* and registers slave MTD objects which are bound to the master according to
@@ -334,171 +646,31 @@
@@ -334,171 +646,31 @@ int add_mtd_partitions(struct mtd_info *
int nbparts)
{
struct mtd_part *slave;
@ -547,7 +547,7 @@
}
}
@@ -574,6 +746,32 @@
@@ -574,6 +746,32 @@ int parse_mtd_partitions(struct mtd_info
return ret;
}
@ -582,7 +582,7 @@
EXPORT_SYMBOL_GPL(deregister_mtd_parser);
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -34,6 +34,8 @@
@@ -34,6 +34,8 @@ struct block2mtd_dev {
struct block_device *blkdev;
struct mtd_info mtd;
struct mutex write_mutex;
@ -591,7 +591,7 @@
};
@@ -86,6 +88,12 @@
@@ -86,6 +88,12 @@ static int block2mtd_erase(struct mtd_in
size_t len = instr->len;
int err;
@ -604,7 +604,7 @@
instr->state = MTD_ERASING;
mutex_lock(&dev->write_mutex);
err = _block2mtd_erase(dev, from, len);
@@ -98,6 +106,10 @@
@@ -98,6 +106,10 @@ static int block2mtd_erase(struct mtd_in
instr->state = MTD_ERASE_DONE;
mtd_erase_callback(instr);
@ -615,7 +615,7 @@
return err;
}
@@ -109,10 +121,14 @@
@@ -109,10 +121,14 @@ static int block2mtd_read(struct mtd_inf
struct page *page;
int index = from >> PAGE_SHIFT;
int offset = from & (PAGE_SIZE-1);
@ -633,7 +633,7 @@
if (from + len > mtd->size)
len = mtd->size - from;
@@ -127,10 +143,14 @@
@@ -127,10 +143,14 @@ static int block2mtd_read(struct mtd_inf
len = len - cpylen;
page = page_read(dev->blkdev->bd_inode->i_mapping, index);
@ -652,7 +652,7 @@
memcpy(buf, page_address(page) + offset, cpylen);
page_cache_release(page);
@@ -141,7 +161,10 @@
@@ -141,7 +161,10 @@ static int block2mtd_read(struct mtd_inf
offset = 0;
index++;
}
@ -664,7 +664,7 @@
}
@@ -193,12 +216,22 @@
@@ -193,12 +216,22 @@ static int block2mtd_write(struct mtd_in
size_t *retlen, const u_char *buf)
{
struct block2mtd_dev *dev = mtd->priv;
@ -691,7 +691,7 @@
if (to + len > mtd->size)
len = mtd->size - to;
@@ -207,6 +240,9 @@
@@ -207,6 +240,9 @@ static int block2mtd_write(struct mtd_in
mutex_unlock(&dev->write_mutex);
if (err > 0)
err = 0;
@ -701,7 +701,7 @@
return err;
}
@@ -215,51 +251,29 @@
@@ -215,51 +251,29 @@ static int block2mtd_write(struct mtd_in
static void block2mtd_sync(struct mtd_info *mtd)
{
struct block2mtd_dev *dev = mtd->priv;
@ -761,7 +761,7 @@
if (devt) {
bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
}
@@ -267,17 +281,96 @@
@@ -267,17 +281,96 @@ static struct block2mtd_dev *add_device(
#endif
if (IS_ERR(bdev)) {
@ -861,7 +861,7 @@
/* Setup the MTD structure */
/* make the name contain the block device in */
@@ -304,6 +397,7 @@
@@ -304,6 +397,7 @@ static struct block2mtd_dev *add_device(
dev->mtd.read = block2mtd_read;
dev->mtd.priv = dev;
dev->mtd.owner = THIS_MODULE;
@ -879,7 +879,7 @@
#include <asm/uaccess.h>
@@ -756,6 +757,13 @@
@@ -756,6 +757,13 @@ static int mtd_ioctl(struct inode *inode
file->f_pos = 0;
break;
}
@ -895,7 +895,7 @@
ret = -ENOTTY;
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -98,6 +98,7 @@
@@ -98,6 +98,7 @@ struct mtd_oob_ops {
uint8_t *oobbuf;
};
@ -903,7 +903,7 @@
struct mtd_info {
u_char type;
u_int32_t flags;
@@ -213,6 +214,9 @@
@@ -213,6 +214,9 @@ struct mtd_info {
struct module *owner;
int usecount;
@ -923,7 +923,7 @@
struct mtd_partition {
char *name; /* identifier string */
u_int32_t size; /* partition size */
@@ -43,6 +44,7 @@
@@ -43,6 +44,7 @@ struct mtd_partition {
u_int32_t mask_flags; /* master MTD flags to mask out for this partition */
struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only)*/
struct mtd_info **mtdp; /* pointer to store the MTD object */
@ -931,7 +931,7 @@
};
#define MTDPART_OFS_NXTBLK (-2)
@@ -52,6 +54,7 @@
@@ -52,6 +54,7 @@ struct mtd_partition {
int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
int del_mtd_partitions(struct mtd_info *);
@ -941,7 +941,7 @@
* Functions dealing with the various ways of partitioning the space
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -95,6 +95,7 @@
@@ -95,6 +95,7 @@ struct otp_info {
#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout)
#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
#define MTDFILEMODE _IO('M', 19)

@ -1,6 +1,6 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -251,14 +251,21 @@
@@ -251,14 +251,21 @@ static int parse_redboot_partitions(stru
#endif
names += strlen(names)+1;

@ -9,7 +9,7 @@
struct fis_image_desc {
unsigned char name[16]; // Null terminated name
uint32_t flash_base; // Address within FLASH of image
@@ -43,6 +45,7 @@
@@ -43,6 +45,7 @@ static int parse_redboot_partitions(stru
struct mtd_partition **pparts,
unsigned long fis_origin)
{
@ -17,7 +17,7 @@
int nrparts = 0;
struct fis_image_desc *buf;
struct mtd_partition *parts;
@@ -211,14 +214,14 @@
@@ -211,14 +214,14 @@ static int parse_redboot_partitions(stru
}
}
#endif
@ -34,7 +34,7 @@
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
if (nulllen > 0) {
strcpy(nullname, nullstring);
@@ -237,6 +240,8 @@
@@ -237,6 +240,8 @@ static int parse_redboot_partitions(stru
}
#endif
for ( ; i<nrparts; i++) {
@ -43,7 +43,7 @@
parts[i].size = fl->img->size;
parts[i].offset = fl->img->flash_base;
parts[i].name = names;
@@ -270,6 +275,14 @@
@@ -270,6 +275,14 @@ static int parse_redboot_partitions(stru
fl = fl->next;
kfree(tmp_fl);
}

@ -1,6 +1,6 @@
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -573,6 +573,7 @@
@@ -573,6 +573,7 @@ struct platform_nand_chip {
int chip_delay;
unsigned int options;
const char **part_probe_types;
@ -10,7 +10,7 @@
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -71,7 +71,18 @@
@@ -71,7 +71,18 @@ static int __init plat_nand_probe(struct
platform_set_drvdata(pdev, data);
/* Scan to find existance of the device */

@ -1,6 +1,6 @@
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -749,6 +749,27 @@
@@ -749,6 +749,27 @@ config NETFILTER_XT_MATCH_STATE
To compile it as a module, choose M here. If unsure, say N.
@ -30,7 +30,7 @@
depends on NETFILTER_XTABLES
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -78,6 +78,7 @@
@@ -78,6 +78,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RATEEST)
obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o
obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
@ -2027,7 +2027,7 @@
+}
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -205,6 +205,14 @@
@@ -205,6 +205,14 @@ destroy_conntrack(struct nf_conntrack *n
* too. */
nf_ct_remove_expectations(ct);
@ -2044,7 +2044,7 @@
BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode));
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -174,7 +174,12 @@
@@ -174,7 +174,12 @@ static int ct_seq_show(struct seq_file *
return -ENOSPC;
#endif
@ -2060,7 +2060,7 @@
return 0;
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -124,6 +124,22 @@
@@ -124,6 +124,22 @@ struct nf_conn
u_int32_t secmark;
#endif

@ -1,6 +1,6 @@
--- a/include/linux/netfilter/xt_layer7.h
+++ b/include/linux/netfilter/xt_layer7.h
@@ -8,6 +8,7 @@
@@ -8,6 +8,7 @@ struct xt_layer7_info {
char protocol[MAX_PROTOCOL_LEN];
char pattern[MAX_PATTERN_LEN];
u_int8_t invert;
@ -10,7 +10,7 @@
#endif /* _XT_LAYER7_H */
--- a/net/netfilter/xt_layer7.c
+++ b/net/netfilter/xt_layer7.c
@@ -297,34 +297,36 @@
@@ -297,34 +297,36 @@ static int match_no_append(struct nf_con
}
/* add the new app data to the conntrack. Return number of bytes added. */
@ -60,7 +60,7 @@
return length;
}
@@ -411,7 +413,7 @@
@@ -411,7 +413,7 @@ match(const struct sk_buff *skbin,
const struct xt_layer7_info * info = matchinfo;
enum ip_conntrack_info master_ctinfo, ctinfo;
struct nf_conn *master_conntrack, *conntrack;
@ -69,7 +69,7 @@
unsigned int pattern_result, appdatalen;
regexp * comppattern;
@@ -439,8 +441,8 @@
@@ -439,8 +441,8 @@ match(const struct sk_buff *skbin,
master_conntrack = master_ct(master_conntrack);
/* if we've classified it or seen too many packets */
@ -80,7 +80,7 @@
pattern_result = match_no_append(conntrack, master_conntrack,
ctinfo, master_ctinfo, info);
@@ -473,6 +475,25 @@
@@ -473,6 +475,25 @@ match(const struct sk_buff *skbin,
/* the return value gets checked later, when we're ready to use it */
comppattern = compile_and_cache(info->pattern, info->protocol);

@ -893,7 +893,7 @@
+
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -57,6 +57,12 @@
@@ -57,6 +57,12 @@ config IP_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
# The matches.
@ -908,7 +908,7 @@
depends on IP_NF_IPTABLES
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -50,6 +50,8 @@
@@ -50,6 +50,8 @@ obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn
obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o

@ -7517,7 +7517,7 @@
+module_exit(ipt_SET_fini);
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -401,5 +401,122 @@
@@ -401,5 +401,122 @@ config IP_NF_ARP_MANGLE
Allows altering the ARP packet payload: source and destination
hardware and network addresses.
@ -7642,7 +7642,7 @@
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -49,6 +49,7 @@
@@ -49,6 +49,7 @@ obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o
obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o
obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
@ -7650,7 +7650,7 @@
obj-$(CONFIG_IP_NF_MATCH_IPP2P) += ipt_ipp2p.o
@@ -62,6 +63,18 @@
@@ -62,6 +63,18 @@ obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += i
obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o
obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o

@ -204,7 +204,7 @@
+}
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -63,6 +63,22 @@
@@ -63,6 +63,22 @@ config IP_NF_MATCH_IPP2P
help
Module for matching traffic of various Peer-to-Peer applications
@ -229,7 +229,7 @@
depends on IP_NF_IPTABLES
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -50,6 +50,7 @@
@@ -50,6 +50,7 @@ obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn
obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
obj-$(CONFIG_IP_NF_MATCH_SET) += ipt_set.o

@ -477,7 +477,7 @@
+
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -117,6 +117,129 @@
@@ -117,6 +117,129 @@ config EQUALIZER
To compile this driver as a module, choose M here: the module
will be called eql. If unsure, say N.
@ -609,7 +609,7 @@
select CRC32
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -142,6 +142,7 @@
@@ -142,6 +142,7 @@ obj-$(CONFIG_SLHC) += slhc.o
obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
obj-$(CONFIG_DUMMY) += dummy.o
@ -653,7 +653,7 @@
+#endif /* _IP6T_IMQ_H */
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -300,6 +300,10 @@
@@ -300,6 +300,10 @@ struct sk_buff {
struct nf_conntrack *nfct;
struct sk_buff *nfct_reasm;
#endif
@ -664,7 +664,7 @@
#ifdef CONFIG_BRIDGE_NETFILTER
struct nf_bridge_info *nf_bridge;
#endif
@@ -1633,6 +1637,10 @@
@@ -1633,6 +1637,10 @@ static inline void __nf_copy(struct sk_b
dst->nfct_reasm = src->nfct_reasm;
nf_conntrack_get_reasm(src->nfct_reasm);
#endif
@ -687,7 +687,7 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/stat.h>
@@ -1569,7 +1572,11 @@
@@ -1569,7 +1572,11 @@ static int dev_gso_segment(struct sk_buf
int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
if (likely(!skb->next)) {
@ -774,7 +774,7 @@
+MODULE_LICENSE("GPL");
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -145,6 +145,17 @@
@@ -145,6 +145,17 @@ config IP_NF_FILTER
To compile it as a module, choose M here. If unsure, say N.
@ -794,7 +794,7 @@
depends on IP_NF_FILTER
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -58,6 +58,7 @@
@@ -58,6 +58,7 @@ obj-$(CONFIG_IP_NF_MATCH_IPP2P) += ipt_i
obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
@ -876,7 +876,7 @@
+MODULE_LICENSE("GPL");
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -179,6 +179,15 @@
@@ -179,6 +179,15 @@ config IP6_NF_MANGLE
To compile it as a module, choose M here. If unsure, say N.
@ -904,7 +904,7 @@
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -203,6 +203,7 @@
@@ -203,6 +203,7 @@ void __qdisc_run(struct net_device *dev)
clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
}

@ -95,7 +95,7 @@
+#define xt_request_find_match xt_request_find_match_lo
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -288,6 +288,14 @@
@@ -288,6 +288,14 @@ config NETFILTER_XTABLES
# alphabetically ordered list of targets
@ -110,7 +110,7 @@
config NETFILTER_XT_TARGET_CLASSIFY
tristate '"CLASSIFY" target support'
depends on NETFILTER_XTABLES
@@ -317,6 +325,14 @@
@@ -317,6 +325,14 @@ config NETFILTER_XT_TARGET_CONNMARK
<file:Documentation/kbuild/modules.txt>. The module will be called
ipt_CONNMARK.ko. If unsure, say `N'.
@ -125,7 +125,7 @@
config NETFILTER_XT_TARGET_DSCP
tristate '"DSCP" and "TOS" target support'
depends on NETFILTER_XTABLES
@@ -653,6 +669,14 @@
@@ -653,6 +669,14 @@ config NETFILTER_XT_MATCH_POLICY
To compile it as a module, choose M here. If unsure, say N.
@ -142,7 +142,7 @@
depends on NETFILTER_XTABLES
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -51,6 +51,8 @@
@@ -51,6 +51,8 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK
obj-$(CONFIG_NETFILTER_XT_TARGET_TCPMSS) += xt_TCPMSS.o
obj-$(CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP) += xt_TCPOPTSTRIP.o
obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o
@ -151,7 +151,7 @@
# matches
obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o
@@ -84,3 +86,4 @@
@@ -84,3 +86,4 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING)
obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o
obj-$(CONFIG_NETFILTER_XT_MATCH_U32) += xt_u32.o
@ -833,7 +833,7 @@
+MODULE_ALIAS("ipt_portscan");
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1554,6 +1554,8 @@
@@ -1554,6 +1554,8 @@ __u32 secure_tcp_sequence_number(__be32
return seq;
}

@ -1,6 +1,6 @@
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -449,6 +449,23 @@
@@ -449,6 +449,23 @@ config NETFILTER_XT_TARGET_CONNSECMARK
To compile it as a module, choose M here. If unsure, say N.
@ -26,7 +26,7 @@
depends on NETFILTER_XTABLES && (IPV6 || IPV6=n)
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -48,6 +48,7 @@
@@ -48,6 +48,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE
obj-$(CONFIG_NETFILTER_XT_TARGET_NOTRACK) += xt_NOTRACK.o
obj-$(CONFIG_NETFILTER_XT_TARGET_RATEEST) += xt_RATEEST.o
obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK) += xt_SECMARK.o

@ -1,6 +1,6 @@
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -157,7 +157,7 @@
@@ -157,7 +157,7 @@ config NF_CONNTRACK_FTP
config NF_CONNTRACK_H323
tristate "H.323 protocol support"
@ -9,7 +9,7 @@
depends on NETFILTER_ADVANCED
help
H.323 is a VoIP signalling protocol from ITU-T. As one of the most
@@ -468,7 +468,7 @@
@@ -468,7 +468,7 @@ config NETFILTER_XT_TARGET_TARPIT
config NETFILTER_XT_TARGET_TCPMSS
tristate '"TCPMSS" target support'

@ -294,7 +294,7 @@
+#endif /* _NETFILTER_MIME_H */
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -23,6 +23,7 @@
@@ -23,6 +23,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
@ -304,7 +304,7 @@
obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -270,6 +270,16 @@
@@ -270,6 +270,16 @@ config NF_CONNTRACK_TFTP
To compile it as a module, choose M here. If unsure, say N.
@ -323,7 +323,7 @@
depends on NF_CONNTRACK
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -33,6 +33,7 @@
@@ -33,6 +33,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
@ -333,7 +333,7 @@
obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -304,6 +304,11 @@
@@ -304,6 +304,11 @@ config NF_NAT_IRC
depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
default NF_NAT && NF_CONNTRACK_IRC

@ -1,6 +1,6 @@
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -162,8 +162,37 @@
@@ -162,8 +162,37 @@ struct tc_sfq_xstats
*
* The only reason for this is efficiency, it is possible
* to change these parameters in compile time.
@ -40,7 +40,7 @@
enum
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -128,6 +128,37 @@
@@ -128,6 +128,37 @@ config NET_SCH_SFQ
To compile this code as a module, choose M here: the
module will be called sch_sfq.
@ -80,7 +80,7 @@
---help---
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -23,6 +23,7 @@
@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_SCH_GRED) += sch_gred.o
obj-$(CONFIG_NET_SCH_INGRESS) += sch_ingress.o
obj-$(CONFIG_NET_SCH_DSMARK) += sch_dsmark.o
obj-$(CONFIG_NET_SCH_SFQ) += sch_sfq.o

@ -1,6 +1,6 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -597,6 +597,9 @@
@@ -597,6 +597,9 @@ core-$(CONFIG_TOSHIBA_RBTX4938) += arch/
cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000

@ -1,6 +1,6 @@
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -111,6 +111,17 @@
@@ -111,6 +111,17 @@ static int jffs2_build_filesystem(struct
dbg_fsbuild("scanned flash completely\n");
jffs2_dbg_dump_block_lists_nolock(c);
@ -20,7 +20,7 @@
/* Now scan the directory tree, increasing nlink according to every dirent found. */
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -72,7 +72,7 @@
@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
return ret;
if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
return ret;
@ -29,7 +29,7 @@
think it's recoverable now. */
jeb->dirty_size += jeb->wasted_size;
c->dirty_size += jeb->wasted_size;
@@ -144,8 +144,11 @@
@@ -144,8 +144,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
/* reset summary info for next eraseblock scan */
jffs2_sum_reset_collected(s);
@ -43,7 +43,7 @@
if (ret < 0)
goto out;
@@ -400,7 +403,7 @@
@@ -400,7 +403,7 @@ static int jffs2_scan_xref_node(struct j
if (!ref)
return -ENOMEM;
@ -52,7 +52,7 @@
* and AFTER xattr_ref is marked as a dead xref,
* ref->xid is used to store 32bit xid, xd is not used
* ref->ino is used to store 32bit inode-number, ic is not used
@@ -473,7 +476,7 @@
@@ -473,7 +476,7 @@ static int jffs2_scan_eraseblock (struct
struct jffs2_sum_marker *sm;
void *sumptr = NULL;
uint32_t sumlen;
@ -61,7 +61,7 @@
if (!buf_size) {
/* XIP case. Just look, point at the summary if it's there */
sm = (void *)buf + c->sector_size - sizeof(*sm);
@@ -489,9 +492,9 @@
@@ -489,9 +492,9 @@ static int jffs2_scan_eraseblock (struct
buf_len = sizeof(*sm);
/* Read as much as we want into the _end_ of the preallocated buffer */
@ -73,7 +73,7 @@
if (err)
return err;
@@ -510,9 +513,9 @@
@@ -510,9 +513,9 @@ static int jffs2_scan_eraseblock (struct
}
if (buf_len < sumlen) {
/* Need to read more so that the entire summary node is present */
@ -85,7 +85,7 @@
if (err)
return err;
}
@@ -525,7 +528,7 @@
@@ -525,7 +528,7 @@ static int jffs2_scan_eraseblock (struct
if (buf_size && sumlen > buf_size)
kfree(sumptr);
@ -94,7 +94,7 @@
If it returns positive, that's a block classification
(i.e. BLK_STATE_xxx) so return that too.
If it returns zero, fall through to full scan. */
@@ -546,6 +549,17 @@
@@ -546,6 +549,17 @@ static int jffs2_scan_eraseblock (struct
return err;
}
@ -112,7 +112,7 @@
/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
ofs = 0;
@@ -671,7 +685,7 @@
@@ -671,7 +685,7 @@ scan_more:
scan_end = buf_len;
goto more_empty;
}
@ -121,7 +121,7 @@
/* See how much more there is to read in this eraseblock... */
buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
if (!buf_len) {
@@ -907,7 +921,7 @@
@@ -907,7 +921,7 @@ scan_more:
D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));

@ -1,6 +1,6 @@
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1539,7 +1539,7 @@
@@ -1539,7 +1539,7 @@ static const struct rtl_cfg_info {
.hw_start = rtl_hw_start_8169,
.region = 1,
.align = 0,
@ -9,7 +9,7 @@
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.msi = 0
@@ -1548,7 +1548,7 @@
@@ -1548,7 +1548,7 @@ static const struct rtl_cfg_info {
.hw_start = rtl_hw_start_8168,
.region = 2,
.align = 8,
@ -18,7 +18,7 @@
TxErr | TxOK | RxOK | RxErr,
.napi_event = TxErr | TxOK | RxOK | RxOverflow,
.msi = RTL_FEATURE_MSI
@@ -1557,7 +1557,7 @@
@@ -1557,7 +1557,7 @@ static const struct rtl_cfg_info {
.hw_start = rtl_hw_start_8101,
.region = 2,
.align = 8,
@ -27,7 +27,7 @@
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.msi = RTL_FEATURE_MSI
@@ -2905,10 +2905,12 @@
@@ -2905,10 +2905,12 @@ static irqreturn_t rtl8169_interrupt(int
break;
}

@ -1,6 +1,6 @@
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1477,6 +1477,9 @@
@@ -1477,6 +1477,9 @@ config VXFS_FS
To compile this as a module, choose M here: the module will be
called freevxfs. If unsure, say N.
@ -12,7 +12,7 @@
depends on BLOCK
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -77,6 +77,7 @@
@@ -77,6 +77,7 @@ obj-$(CONFIG_SQUASHFS) += squashfs/
obj-y += ramfs/
obj-$(CONFIG_HUGETLBFS) += hugetlbfs/
obj-$(CONFIG_CODA_FS) += coda/

@ -1,6 +1,6 @@
--- a/fs/mini_fo/main.c
+++ b/fs/mini_fo/main.c
@@ -79,6 +79,7 @@
@@ -79,6 +79,7 @@ mini_fo_tri_interpose(dentry_t *hidden_d
* of the new inode's fields
*/
@ -8,7 +8,7 @@
/*
* original: inode = iget(sb, hidden_inode->i_ino);
*/
@@ -87,6 +88,13 @@
@@ -87,6 +88,13 @@ mini_fo_tri_interpose(dentry_t *hidden_d
err = -EACCES; /* should be impossible??? */
goto out;
}
@ -22,7 +22,7 @@
/*
* interpose the inode if not already interposed
@@ -184,9 +192,9 @@
@@ -184,9 +192,9 @@ mini_fo_parse_options(super_block_t *sb,
hidden_root = ERR_PTR(err);
goto out;
}
@ -35,7 +35,7 @@
} else if(!strncmp("sto=", options, 4)) {
/* parse the storage dir */
@@ -204,9 +212,9 @@
@@ -204,9 +212,9 @@ mini_fo_parse_options(super_block_t *sb,
hidden_root2 = ERR_PTR(err);
goto out;
}
@ -50,7 +50,7 @@
/* validate storage dir, this is done in
--- a/fs/mini_fo/mini_fo.h
+++ b/fs/mini_fo/mini_fo.h
@@ -302,6 +302,10 @@
@@ -302,6 +302,10 @@ extern int mini_fo_tri_interpose(dentry_
extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
dentry_t *src_dentry, struct vfsmount *src_mnt);
@ -61,7 +61,7 @@
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
@@ -501,6 +505,29 @@
@@ -501,6 +505,29 @@ static inline void double_unlock(struct
#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
#endif /* __KERNEL__ */
@ -93,7 +93,7 @@
*/
--- a/fs/mini_fo/super.c
+++ b/fs/mini_fo/super.c
@@ -262,10 +262,31 @@
@@ -262,10 +262,31 @@ mini_fo_umount_begin(super_block_t *sb)
}
#endif
@ -127,7 +127,7 @@
#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
--- a/fs/mini_fo/aux.c
+++ b/fs/mini_fo/aux.c
@@ -164,11 +164,11 @@
@@ -164,11 +164,11 @@ dentry_t *bpath_walk(super_block_t *sb,
err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
/* validate */

@ -1,6 +1,6 @@
--- a/fs/mini_fo/meta.c
+++ b/fs/mini_fo/meta.c
@@ -442,6 +442,11 @@
@@ -442,6 +442,11 @@ int meta_write_d_entry(dentry_t *dentry,
S_IRUSR | S_IWUSR);
#endif
}
@ -12,7 +12,7 @@
/* open META-file for writing */
meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
if(!meta_file || IS_ERR(meta_file)) {
@@ -535,6 +540,11 @@
@@ -535,6 +540,11 @@ int meta_write_r_entry(dentry_t *dentry,
meta_dentry, S_IRUSR | S_IWUSR);
#endif
}
@ -24,7 +24,7 @@
/* open META-file for writing */
meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
if(!meta_file || IS_ERR(meta_file)) {
@@ -671,14 +681,16 @@
@@ -671,14 +681,16 @@ int meta_sync_d_list(dentry_t *dentry, i
}
}
@ -44,7 +44,7 @@
dput(meta_dentry);
err = -1;
goto out;
@@ -811,14 +823,16 @@
@@ -811,14 +823,16 @@ int meta_sync_r_list(dentry_t *dentry, i
}
}

@ -1,6 +1,6 @@
--- a/fs/mini_fo/super.c
+++ b/fs/mini_fo/super.c
@@ -84,6 +84,7 @@
@@ -84,6 +84,7 @@ mini_fo_write_inode(inode_t *inode, int
#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
@ -8,7 +8,7 @@
STATIC void
mini_fo_put_inode(inode_t *inode)
{
@@ -99,6 +100,7 @@
@@ -99,6 +100,7 @@ mini_fo_put_inode(inode_t *inode)
if (atomic_read(&inode->i_count) == 1)
inode->i_nlink = 0;
}
@ -16,7 +16,7 @@
#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
@@ -238,7 +240,7 @@
@@ -238,7 +240,7 @@ mini_fo_clear_inode(inode_t *inode)
* dies.
*/
STATIC void
@ -25,7 +25,7 @@
mini_fo_umount_begin(struct vfsmount *mnt, int flags)
{
struct vfsmount *hidden_mnt;
@@ -290,7 +292,9 @@
@@ -290,7 +292,9 @@ struct super_operations mini_fo_sops =
#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
write_inode: mini_fo_write_inode,
#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */

@ -1,6 +1,6 @@
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -29,7 +29,8 @@
@@ -29,7 +29,8 @@ u64 uevent_seqnum;
char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
static DEFINE_SPINLOCK(sequence_lock);
#if defined(CONFIG_NET)
@ -10,7 +10,7 @@
#endif
/* the strings here must match the enum in include/linux/kobject.h */
@@ -42,6 +43,18 @@
@@ -42,6 +43,18 @@ static const char *kobject_actions[] = {
[KOBJ_OFFLINE] = "offline",
};
@ -29,7 +29,7 @@
/**
* kobject_action_type - translate action string to numeric type
*
@@ -194,9 +207,7 @@
@@ -194,9 +207,7 @@ int kobject_uevent_env(struct kobject *k
kobj->state_remove_uevent_sent = 1;
/* we will send an event, so request a new sequence number */

@ -1,6 +1,6 @@
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -9,7 +9,7 @@
@@ -9,7 +9,7 @@ config SND_PCM
depends on SND
config SND_HWDEP

@ -1,6 +1,6 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -190,4 +190,8 @@
@@ -190,4 +190,8 @@ config LEDS_TRIGGER_DEFAULT_ON
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
@ -11,7 +11,7 @@
endif # NEW_LEDS
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -27,3 +27,4 @@
@@ -27,3 +27,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledt
obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o

@ -1,6 +1,6 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -77,6 +77,12 @@
@@ -77,6 +77,12 @@ config LEDS_WRAP
help
This option enables support for the PCEngines WRAP programmable LEDs.
@ -15,7 +15,7 @@
depends on LEDS_CLASS && ARCH_H1940
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -13,6 +13,7 @@
@@ -13,6 +13,7 @@ obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c2
obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o

@ -1,6 +1,6 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -200,4 +200,11 @@
@@ -200,4 +200,11 @@ config LEDS_TRIGGER_MORSE
tristate "LED Morse Trigger"
depends on LEDS_TRIGGERS
@ -14,7 +14,7 @@
endif # NEW_LEDS
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -29,3 +29,4 @@
@@ -29,3 +29,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += l
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o

@ -1,6 +1,6 @@
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -197,4 +197,20 @@
@@ -197,4 +197,20 @@ config HP_SDC_RTC
Say Y here if you want to support the built-in real time clock
of the HP SDC controller.
@ -23,7 +23,7 @@
endif
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -19,3 +19,4 @@
@@ -19,3 +19,4 @@ obj-$(CONFIG_INPUT_YEALINK) += yealink.
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o

@ -1,6 +1,6 @@
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1002,6 +1002,13 @@
@@ -1002,6 +1002,13 @@ config CS5535_GPIO
If compiled as a module, it will be called cs5535_gpio.
@ -16,7 +16,7 @@
depends on CPU_VR41XX
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -95,6 +95,7 @@
@@ -95,6 +95,7 @@ obj-$(CONFIG_SCx200_GPIO) += scx200_gpio
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o

@ -1,6 +1,6 @@
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -421,6 +421,7 @@
@@ -421,6 +421,7 @@ config FS_POSIX_ACL
source "fs/xfs/Kconfig"
source "fs/gfs2/Kconfig"
@ -10,7 +10,7 @@
tristate "OCFS2 file system support"
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -121,3 +121,4 @@
@@ -121,3 +121,4 @@ obj-$(CONFIG_HPPFS) += hppfs/
obj-$(CONFIG_DEBUG_FS) += debugfs/
obj-$(CONFIG_OCFS2_FS) += ocfs2/
obj-$(CONFIG_GFS2_FS) += gfs2/

@ -1,6 +1,6 @@
--- a/fs/yaffs2/yaffs_fs.c
+++ b/fs/yaffs2/yaffs_fs.c
@@ -181,7 +181,13 @@
@@ -181,7 +181,13 @@ static int yaffs_statfs(struct super_blo
#else
static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
#endif
@ -14,7 +14,7 @@
static void yaffs_put_inode(struct inode *inode);
static void yaffs_delete_inode(struct inode *);
@@ -284,7 +290,9 @@
@@ -284,7 +290,9 @@ static struct file_operations yaffs_dir_
static struct super_operations yaffs_super_ops = {
.statfs = yaffs_statfs,
@ -24,7 +24,7 @@
.put_inode = yaffs_put_inode,
.put_super = yaffs_put_super,
.delete_inode = yaffs_delete_inode,
@@ -844,11 +852,17 @@
@@ -844,11 +852,17 @@ struct inode *yaffs_get_inode(struct sup
T(YAFFS_TRACE_OS,
(KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
@ -42,7 +42,7 @@
return inode;
}
@@ -1427,6 +1441,39 @@
@@ -1427,6 +1441,39 @@ static int yaffs_sync_fs(struct super_bl
}
@ -82,7 +82,7 @@
static void yaffs_read_inode(struct inode *inode)
{
/* NB This is called as a side effect of other functions, but
@@ -1448,6 +1495,7 @@
@@ -1448,6 +1495,7 @@ static void yaffs_read_inode(struct inod
yaffs_GrossUnlock(dev);
}

@ -1,6 +1,6 @@
--- a/fs/yaffs2/yaffs_fs.c
+++ b/fs/yaffs2/yaffs_fs.c
@@ -76,6 +76,12 @@
@@ -76,6 +76,12 @@ extern const char *yaffs_guts_c_version;
#endif
@ -13,7 +13,7 @@
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
#define WRITE_SIZE_STR "writesize"
#define WRITE_SIZE(mtd) (mtd)->writesize
@@ -189,7 +195,9 @@
@@ -189,7 +195,9 @@ static void yaffs_read_inode(struct inod
#endif
@ -23,7 +23,7 @@
static void yaffs_delete_inode(struct inode *);
static void yaffs_clear_inode(struct inode *);
@@ -293,7 +301,9 @@
@@ -293,7 +301,9 @@ static struct super_operations yaffs_sup
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25))
.read_inode = yaffs_read_inode,
#endif
@ -33,7 +33,7 @@
.put_super = yaffs_put_super,
.delete_inode = yaffs_delete_inode,
.clear_inode = yaffs_clear_inode,
@@ -437,6 +447,7 @@
@@ -437,6 +447,7 @@ static struct dentry *yaffs_lookup(struc
}
@ -41,7 +41,7 @@
/* For now put inode is just for debugging
* Put inode is called when the inode **structure** is put.
*/
@@ -447,6 +458,7 @@
@@ -447,6 +458,7 @@ static void yaffs_put_inode(struct inode
atomic_read(&inode->i_count)));
}
@ -49,7 +49,7 @@
/* clear is called to tell the fs to release any per-inode data it holds */
static void yaffs_clear_inode(struct inode *inode)
@@ -2279,7 +2291,7 @@
@@ -2279,7 +2291,7 @@ static int __init init_yaffs_fs(void)
/* Install the proc_fs entry */
my_proc_entry = create_proc_entry("yaffs",
S_IRUGO | S_IFREG,
@ -58,7 +58,7 @@
if (my_proc_entry) {
my_proc_entry->write_proc = yaffs_proc_write;
@@ -2325,7 +2337,7 @@
@@ -2325,7 +2337,7 @@ static void __exit exit_yaffs_fs(void)
T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__
" removing. \n"));

@ -1,6 +1,6 @@
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -348,6 +348,50 @@
@@ -348,6 +348,50 @@ int phy_ethtool_gset(struct phy_device *
}
EXPORT_SYMBOL(phy_ethtool_gset);
@ -51,7 +51,7 @@
/**
* phy_mii_ioctl - generic PHY MII ioctl interface
* @phydev: the phy_device struct
@@ -403,8 +447,8 @@
@@ -403,8 +447,8 @@ int phy_mii_ioctl(struct phy_device *phy
}
phy_write(phydev, mii_data->reg_num, val);
@ -62,7 +62,7 @@
&& val & BMCR_RESET
&& phydev->drv->config_init) {
phy_scan_fixups(phydev);
@@ -524,7 +568,7 @@
@@ -524,7 +568,7 @@ static void phy_force_reduction(struct p
int idx;
idx = phy_find_setting(phydev->speed, phydev->duplex);
@ -73,7 +73,7 @@
idx = phy_find_valid(idx, phydev->supported);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -434,6 +434,7 @@
@@ -434,6 +434,7 @@ void phy_start_machine(struct phy_device
void phy_stop_machine(struct phy_device *phydev);
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);

@ -1,6 +1,6 @@
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -135,6 +135,9 @@
@@ -135,6 +135,9 @@ static int mdio_bus_match(struct device
struct phy_device *phydev = to_phy_device(dev);
struct phy_driver *phydrv = to_phy_driver(drv);
@ -12,7 +12,7 @@
}
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -339,6 +339,11 @@
@@ -339,6 +339,11 @@ struct phy_driver {
u32 features;
u32 flags;

@ -1,6 +1,6 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -65,6 +65,11 @@
@@ -65,6 +65,11 @@ config REALTEK_PHY
---help---
Supports the Realtek 821x PHY.
@ -14,7 +14,7 @@
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -12,6 +12,7 @@
@@ -12,6 +12,7 @@ obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o

@ -1,6 +1,6 @@
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -143,6 +143,18 @@
@@ -143,6 +143,18 @@ int phy_scan_fixups(struct phy_device *p
}
EXPORT_SYMBOL(phy_scan_fixups);
@ -19,7 +19,7 @@
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
{
struct phy_device *dev;
@@ -168,6 +180,8 @@
@@ -168,6 +180,8 @@ struct phy_device* phy_device_create(str
dev->bus = bus;
dev->state = PHY_DOWN;
@ -30,7 +30,7 @@
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -309,6 +309,20 @@
@@ -309,6 +309,20 @@ struct phy_device {
void (*adjust_link)(struct net_device *dev);
void (*adjust_state)(struct net_device *dev);
@ -53,7 +53,7 @@
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -613,6 +613,7 @@
@@ -613,6 +613,7 @@ struct net_device
void *ax25_ptr; /* AX.25 specific data */
struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data,
assign before registering */

@ -1,6 +1,6 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -70,6 +70,12 @@
@@ -70,6 +70,12 @@ config ADM6996_PHY
---help---
Currently supports the ADM6996F switch
@ -15,7 +15,7 @@
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -13,6 +13,7 @@
@@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
@ -38,7 +38,7 @@
/**
* mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
* @bus: target mii_bus
@@ -85,6 +91,7 @@
@@ -85,6 +91,7 @@ int mdiobus_register(struct mii_bus *bus
phydev->dev.parent = bus->dev;
phydev->dev.bus = &mdio_bus_type;

@ -1,6 +1,6 @@
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -58,6 +58,7 @@
@@ -58,6 +58,7 @@ static struct usb_driver usb_serial_driv
drivers depend on it.
*/
@ -8,7 +8,7 @@
static int debug;
static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */
static DEFINE_MUTEX(table_lock);
@@ -814,7 +815,7 @@
@@ -814,7 +815,7 @@ int usb_serial_probe(struct usb_interfac
dev_err(&interface->dev, "No free urbs available\n");
goto probe_error;
}
@ -17,7 +17,7 @@
port->bulk_in_size = buffer_size;
port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
@@ -1228,3 +1229,5 @@
@@ -1228,3 +1229,5 @@ MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");

@ -1,6 +1,6 @@
--- a/init/main.c
+++ b/init/main.c
@@ -803,7 +803,7 @@
@@ -803,7 +803,7 @@ static int noinline init_post(void)
numa_default_policy();
if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)

@ -11,7 +11,7 @@
#include <linux/types.h>
#ifdef __KERNEL__
@@ -228,4 +232,6 @@
@@ -228,4 +232,6 @@ struct itimerval {
*/
#define TIMER_ABSTIME 0x01
@ -35,7 +35,7 @@
#ifdef __KERNEL__
#define DECLARE_BITMAP(name,bits) \
@@ -161,6 +169,8 @@
@@ -161,6 +169,8 @@ typedef unsigned long blkcnt_t;
#endif /* __KERNEL_STRICT_NAMES */

@ -62,7 +62,7 @@
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -93,6 +93,9 @@
@@ -93,6 +93,9 @@ check-lxdialog := $(srctree)/$(src)/lxd
# we really need to do so. (Do not call gcc as part of make mrproper)
HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -2397,13 +2397,13 @@
@@ -2397,13 +2397,13 @@ int prism2_ap_get_sta_qual(local_info_t
addr[count].sa_family = ARPHRD_ETHER;
memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
if (sta->last_rx_silence == 0)
@ -20,7 +20,7 @@
qual[count].updated = sta->last_rx_updated;
sta->last_rx_updated = IW_QUAL_DBM;
@@ -2468,13 +2468,13 @@
@@ -2468,13 +2468,13 @@ int prism2_ap_translate_scan(struct net_
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVQUAL;
if (sta->last_rx_silence == 0)
@ -54,7 +54,7 @@
#endif /* HOSTAP_CONFIG_H */
--- a/drivers/net/wireless/hostap/hostap.h
+++ b/drivers/net/wireless/hostap/hostap.h
@@ -89,6 +89,7 @@
@@ -89,6 +89,7 @@ extern const struct iw_handler_def hosta
extern const struct ethtool_ops prism2_ethtool_ops;
int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
@ -64,7 +64,7 @@
#endif /* HOSTAP_H */
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -933,6 +933,7 @@
@@ -933,6 +933,7 @@ static int hfa384x_set_rid(struct net_de
prism2_hw_reset(dev);
}
@ -74,7 +74,7 @@
--- a/drivers/net/wireless/hostap/hostap_info.c
+++ b/drivers/net/wireless/hostap/hostap_info.c
@@ -434,6 +434,11 @@
@@ -434,6 +434,11 @@ static void handle_info_queue_linkstatus
}
/* Get BSSID if we have a valid AP address */
@ -88,7 +88,7 @@
netif_carrier_on(local->ddev);
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -1500,23 +1500,20 @@
@@ -1500,23 +1500,20 @@ static int prism2_txpower_hfa386x_to_dBm
val = 255;
tmp = val;
@ -116,7 +116,7 @@
return (unsigned char) tmp;
}
@@ -4076,3 +4073,35 @@
@@ -4076,3 +4073,35 @@ int hostap_ioctl(struct net_device *dev,
return ret;
}

@ -1,6 +1,6 @@
--- a/include/linux/stddef.h
+++ b/include/linux/stddef.h
@@ -16,6 +16,7 @@
@@ -16,6 +16,7 @@ enum {
false = 0,
true = 1
};
@ -8,7 +8,7 @@
#undef offsetof
#ifdef __compiler_offsetof
@@ -23,6 +24,5 @@
@@ -23,6 +24,5 @@ enum {
#else
#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
#endif

@ -1,6 +1,6 @@
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -65,6 +65,7 @@
@@ -65,6 +65,7 @@ config CRYPTO_NULL
config CRYPTO_CRYPTD
tristate "Software async crypto daemon"
select CRYPTO_BLKCIPHER
@ -8,7 +8,7 @@
select CRYPTO_MANAGER
help
This is a generic software asynchronous crypto daemon that
@@ -212,7 +213,7 @@
@@ -212,7 +213,7 @@ comment "Digest"
config CRYPTO_CRC32C
tristate "CRC32c CRC algorithm"
@ -17,7 +17,7 @@
select LIBCRC32C
help
Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used
@@ -241,6 +242,57 @@
@@ -241,6 +242,57 @@ config CRYPTO_MICHAEL_MIC
should not be used for other purposes because of the weakness
of the algorithm.
@ -75,7 +75,7 @@
config CRYPTO_SHA1
tristate "SHA1 digest algorithm"
select CRYPTO_ALGAPI
@@ -614,6 +666,15 @@
@@ -614,6 +666,15 @@ config CRYPTO_LZO
help
This is the LZO algorithm.
@ -93,7 +93,7 @@
endif # if CRYPTO
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -19,6 +19,7 @@
@@ -19,6 +19,7 @@ obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto
obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
crypto_hash-objs := hash.o
@ -101,7 +101,7 @@
obj-$(CONFIG_CRYPTO_HASH) += crypto_hash.o
obj-$(CONFIG_CRYPTO_MANAGER) += cryptomgr.o
@@ -27,6 +28,10 @@
@@ -27,6 +28,10 @@ obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o
obj-$(CONFIG_CRYPTO_NULL) += crypto_null.o
obj-$(CONFIG_CRYPTO_MD4) += md4.o
obj-$(CONFIG_CRYPTO_MD5) += md5.o
@ -112,7 +112,7 @@
obj-$(CONFIG_CRYPTO_SHA1) += sha1_generic.o
obj-$(CONFIG_CRYPTO_SHA256) += sha256_generic.o
obj-$(CONFIG_CRYPTO_SHA512) += sha512_generic.o
@@ -64,7 +69,7 @@
@@ -64,7 +69,7 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += mich
obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o
obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o
obj-$(CONFIG_CRYPTO_LZO) += lzo.o
@ -320,7 +320,7 @@
+MODULE_DESCRIPTION("Asynchronous cryptographic hash type");
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -235,8 +235,12 @@
@@ -235,8 +235,12 @@ static int crypto_init_ops(struct crypto
return crypto_init_cipher_ops(tfm);
case CRYPTO_ALG_TYPE_DIGEST:
@ -346,7 +346,7 @@
static const u32 camellia_sp1110[256] = {
0x70707000,0x82828200,0x2c2c2c00,0xececec00,
@@ -335,20 +337,6 @@
@@ -335,20 +337,6 @@ static const u32 camellia_sp4404[256] =
/*
* macros
*/
@ -367,7 +367,7 @@
#define ROLDQ(ll, lr, rl, rr, w0, w1, bits) \
do { \
w0 = ll; \
@@ -383,7 +371,7 @@
@@ -383,7 +371,7 @@ static const u32 camellia_sp4404[256] =
^ camellia_sp3033[(u8)(il >> 8)] \
^ camellia_sp4404[(u8)(il )]; \
yl ^= yr; \
@ -376,7 +376,7 @@
yr ^= yl; \
} while(0)
@@ -405,7 +393,7 @@
@@ -405,7 +393,7 @@ static void camellia_setup_tail(u32 *sub
subL[7] ^= subL[1]; subR[7] ^= subR[1];
subL[1] ^= subR[1] & ~subR[9];
dw = subL[1] & subL[9],
@ -385,7 +385,7 @@
/* round 8 */
subL[11] ^= subL[1]; subR[11] ^= subR[1];
/* round 10 */
@@ -414,7 +402,7 @@
@@ -414,7 +402,7 @@ static void camellia_setup_tail(u32 *sub
subL[15] ^= subL[1]; subR[15] ^= subR[1];
subL[1] ^= subR[1] & ~subR[17];
dw = subL[1] & subL[17],
@ -394,7 +394,7 @@
/* round 14 */
subL[19] ^= subL[1]; subR[19] ^= subR[1];
/* round 16 */
@@ -430,7 +418,7 @@
@@ -430,7 +418,7 @@ static void camellia_setup_tail(u32 *sub
} else {
subL[1] ^= subR[1] & ~subR[25];
dw = subL[1] & subL[25],
@ -403,7 +403,7 @@
/* round 20 */
subL[27] ^= subL[1]; subR[27] ^= subR[1];
/* round 22 */
@@ -450,7 +438,7 @@
@@ -450,7 +438,7 @@ static void camellia_setup_tail(u32 *sub
subL[26] ^= kw4l; subR[26] ^= kw4r;
kw4l ^= kw4r & ~subR[24];
dw = kw4l & subL[24],
@ -412,7 +412,7 @@
}
/* round 17 */
subL[22] ^= kw4l; subR[22] ^= kw4r;
@@ -460,7 +448,7 @@
@@ -460,7 +448,7 @@ static void camellia_setup_tail(u32 *sub
subL[18] ^= kw4l; subR[18] ^= kw4r;
kw4l ^= kw4r & ~subR[16];
dw = kw4l & subL[16],
@ -421,7 +421,7 @@
/* round 11 */
subL[14] ^= kw4l; subR[14] ^= kw4r;
/* round 9 */
@@ -469,7 +457,7 @@
@@ -469,7 +457,7 @@ static void camellia_setup_tail(u32 *sub
subL[10] ^= kw4l; subR[10] ^= kw4r;
kw4l ^= kw4r & ~subR[8];
dw = kw4l & subL[8],
@ -430,7 +430,7 @@
/* round 5 */
subL[6] ^= kw4l; subR[6] ^= kw4r;
/* round 3 */
@@ -494,7 +482,7 @@
@@ -494,7 +482,7 @@ static void camellia_setup_tail(u32 *sub
SUBKEY_R(6) = subR[5] ^ subR[7];
tl = subL[10] ^ (subR[10] & ~subR[8]);
dw = tl & subL[8], /* FL(kl1) */
@ -439,7 +439,7 @@
SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */
SUBKEY_R(7) = subR[6] ^ tr;
SUBKEY_L(8) = subL[8]; /* FL(kl1) */
@@ -503,7 +491,7 @@
@@ -503,7 +491,7 @@ static void camellia_setup_tail(u32 *sub
SUBKEY_R(9) = subR[9];
tl = subL[7] ^ (subR[7] & ~subR[9]);
dw = tl & subL[9], /* FLinv(kl2) */
@ -448,7 +448,7 @@
SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */
SUBKEY_R(10) = tr ^ subR[11];
SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */
@@ -516,7 +504,7 @@
@@ -516,7 +504,7 @@ static void camellia_setup_tail(u32 *sub
SUBKEY_R(14) = subR[13] ^ subR[15];
tl = subL[18] ^ (subR[18] & ~subR[16]);
dw = tl & subL[16], /* FL(kl3) */
@ -457,7 +457,7 @@
SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */
SUBKEY_R(15) = subR[14] ^ tr;
SUBKEY_L(16) = subL[16]; /* FL(kl3) */
@@ -525,7 +513,7 @@
@@ -525,7 +513,7 @@ static void camellia_setup_tail(u32 *sub
SUBKEY_R(17) = subR[17];
tl = subL[15] ^ (subR[15] & ~subR[17]);
dw = tl & subL[17], /* FLinv(kl4) */
@ -466,7 +466,7 @@
SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */
SUBKEY_R(18) = tr ^ subR[19];
SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */
@@ -544,7 +532,7 @@
@@ -544,7 +532,7 @@ static void camellia_setup_tail(u32 *sub
} else {
tl = subL[26] ^ (subR[26] & ~subR[24]);
dw = tl & subL[24], /* FL(kl5) */
@ -475,7 +475,7 @@
SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */
SUBKEY_R(23) = subR[22] ^ tr;
SUBKEY_L(24) = subL[24]; /* FL(kl5) */
@@ -553,7 +541,7 @@
@@ -553,7 +541,7 @@ static void camellia_setup_tail(u32 *sub
SUBKEY_R(25) = subR[25];
tl = subL[23] ^ (subR[23] & ~subR[25]);
dw = tl & subL[25], /* FLinv(kl6) */
@ -484,7 +484,7 @@
SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */
SUBKEY_R(26) = tr ^ subR[27];
SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */
@@ -573,17 +561,17 @@
@@ -573,17 +561,17 @@ static void camellia_setup_tail(u32 *sub
/* apply the inverse of the last half of P-function */
i = 2;
do {
@ -508,7 +508,7 @@
SUBKEY_R(i + 5) = SUBKEY_L(i + 5) ^ dw; SUBKEY_L(i + 5) = dw;
i += 8;
} while (i < max);
@@ -599,10 +587,10 @@
@@ -599,10 +587,10 @@ static void camellia_setup128(const unsi
/**
* k == kll || klr || krl || krr (|| is concatenation)
*/
@ -523,7 +523,7 @@
/* generate KL dependent subkeys */
/* kw1 */
@@ -707,14 +695,14 @@
@@ -707,14 +695,14 @@ static void camellia_setup256(const unsi
* key = (kll || klr || krl || krr || krll || krlr || krrl || krrr)
* (|| is concatenation)
*/
@ -546,7 +546,7 @@
/* generate KL dependent subkeys */
/* kw1 */
@@ -870,13 +858,13 @@
@@ -870,13 +858,13 @@ static void camellia_setup192(const unsi
t0 &= ll; \
t2 |= rr; \
rl ^= t2; \
@ -562,7 +562,7 @@
} while(0)
#define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir) \
@@ -892,7 +880,7 @@
@@ -892,7 +880,7 @@ static void camellia_setup192(const unsi
il ^= kl; \
ir ^= il ^ kr; \
yl ^= ir; \
@ -605,7 +605,7 @@
#define CHKSUM_DIGEST_SIZE 4
struct chksum_ctx {
@@ -27,7 +30,7 @@
@@ -27,7 +30,7 @@ struct chksum_ctx {
};
/*
@ -614,7 +614,7 @@
* crc using table.
*/
@@ -67,11 +70,11 @@
@@ -67,11 +70,11 @@ static void chksum_update(struct crypto_
static void chksum_final(struct crypto_tfm *tfm, u8 *out)
{
struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
@ -628,7 +628,7 @@
{
struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
@@ -79,14 +82,14 @@
@@ -79,14 +82,14 @@ static int crc32c_cra_init(struct crypto
return 0;
}
@ -646,7 +646,7 @@
.cra_u = {
.digest = {
.dia_digestsize= CHKSUM_DIGEST_SIZE,
@@ -98,14 +101,125 @@
@@ -98,14 +101,125 @@ static struct crypto_alg alg = {
}
};
@ -783,7 +783,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -45,6 +46,13 @@
@@ -45,6 +46,13 @@ struct cryptd_blkcipher_request_ctx {
crypto_completion_t complete;
};
@ -797,7 +797,7 @@
static inline struct cryptd_state *cryptd_get_state(struct crypto_tfm *tfm)
{
@@ -82,10 +90,8 @@
@@ -82,10 +90,8 @@ static void cryptd_blkcipher_crypt(struc
rctx = ablkcipher_request_ctx(req);
@ -810,7 +810,7 @@
desc.tfm = child;
desc.info = req->info;
@@ -95,8 +101,9 @@
@@ -95,8 +101,9 @@ static void cryptd_blkcipher_crypt(struc
req->base.complete = rctx->complete;
@ -821,7 +821,7 @@
local_bh_enable();
}
@@ -261,6 +268,240 @@
@@ -261,6 +268,240 @@ out_put_alg:
return inst;
}
@ -1062,7 +1062,7 @@
static struct cryptd_state state;
static struct crypto_instance *cryptd_alloc(struct rtattr **tb)
@@ -274,6 +515,8 @@
@@ -274,6 +515,8 @@ static struct crypto_instance *cryptd_al
switch (algt->type & algt->mask & CRYPTO_ALG_TYPE_MASK) {
case CRYPTO_ALG_TYPE_BLKCIPHER:
return cryptd_alloc_blkcipher(tb, &state);
@ -1081,7 +1081,7 @@
#include <crypto/scatterwalk.h>
#include <linux/mm.h>
#include <linux/errno.h>
@@ -141,7 +142,7 @@
@@ -141,7 +142,7 @@ int crypto_init_digest_ops(struct crypto
struct hash_tfm *ops = &tfm->crt_hash;
struct digest_alg *dalg = &tfm->__crt_alg->cra_digest;
@ -1090,7 +1090,7 @@
return -EINVAL;
ops->init = init;
@@ -157,3 +158,83 @@
@@ -157,3 +158,83 @@ int crypto_init_digest_ops(struct crypto
void crypto_exit_digest_ops(struct crypto_tfm *tfm)
{
}
@ -1184,7 +1184,7 @@
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -59,24 +60,107 @@
@@ -59,24 +60,107 @@ static int hash_setkey(struct crypto_has
return alg->setkey(crt, key, keylen);
}
@ -1303,7 +1303,7 @@
static void crypto_hash_show(struct seq_file *m, struct crypto_alg *alg)
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -226,6 +226,7 @@
@@ -226,6 +226,7 @@ static struct crypto_instance *hmac_allo
struct crypto_instance *inst;
struct crypto_alg *alg;
int err;
@ -1311,7 +1311,7 @@
err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_HASH);
if (err)
@@ -236,6 +237,13 @@
@@ -236,6 +237,13 @@ static struct crypto_instance *hmac_allo
if (IS_ERR(alg))
return ERR_CAST(alg);
@ -1325,7 +1325,7 @@
inst = crypto_alloc_instance("hmac", alg);
if (IS_ERR(inst))
goto out_put_alg;
@@ -246,14 +254,10 @@
@@ -246,14 +254,10 @@ static struct crypto_instance *hmac_allo
inst->alg.cra_alignmask = alg->cra_alignmask;
inst->alg.cra_type = &crypto_hash_type;
@ -1344,7 +1344,7 @@
inst->alg.cra_init = hmac_init_tfm;
--- a/crypto/internal.h
+++ b/crypto/internal.h
@@ -86,6 +86,7 @@
@@ -86,6 +86,7 @@ struct crypto_alg *__crypto_alg_lookup(c
struct crypto_alg *crypto_alg_mod_lookup(const char *name, u32 type, u32 mask);
int crypto_init_digest_ops(struct crypto_tfm *tfm);
@ -3329,7 +3329,7 @@
#define IDX2 32400
#define IDX3 1
#define IDX4 8193
@@ -83,7 +76,8 @@
@@ -83,7 +76,8 @@ static char *check[] = {
"blowfish", "twofish", "serpent", "sha384", "sha512", "md4", "aes",
"cast6", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea",
"khazad", "wp512", "wp384", "wp256", "tnepres", "xeta", "fcrypt",
@ -3339,7 +3339,7 @@
};
static void hexdump(unsigned char *buf, unsigned int len)
@@ -110,22 +104,30 @@
@@ -110,22 +104,30 @@ static void test_hash(char *algo, struct
unsigned int i, j, k, temp;
struct scatterlist sg[8];
char result[64];
@ -3375,7 +3375,7 @@
for (i = 0; i < tcount; i++) {
printk("test %u:\n", i + 1);
@@ -139,8 +141,9 @@
@@ -139,8 +141,9 @@ static void test_hash(char *algo, struct
sg_init_one(&sg[0], hash_buff, template[i].psize);
if (template[i].ksize) {
@ -3387,7 +3387,7 @@
if (ret) {
printk("setkey() failed ret=%d\n", ret);
kfree(hash_buff);
@@ -148,17 +151,30 @@
@@ -148,17 +151,30 @@ static void test_hash(char *algo, struct
}
}
@ -3422,7 +3422,7 @@
"fail" : "pass");
kfree(hash_buff);
}
@@ -187,8 +203,9 @@
@@ -187,8 +203,9 @@ static void test_hash(char *algo, struct
}
if (template[i].ksize) {
@ -3434,7 +3434,7 @@
if (ret) {
printk("setkey() failed ret=%d\n", ret);
@@ -196,29 +213,44 @@
@@ -196,29 +213,44 @@ static void test_hash(char *algo, struct
}
}
@ -3486,7 +3486,7 @@
char *q;
struct crypto_aead *tfm;
char *key;
@@ -344,13 +376,12 @@
@@ -344,13 +376,12 @@ static void test_aead(char *algo, int en
goto next_one;
}
@ -3501,7 +3501,7 @@
next_one:
if (!template[i].key)
kfree(key);
@@ -360,7 +391,6 @@
@@ -360,7 +391,6 @@ next_one:
}
printk(KERN_INFO "\ntesting %s %s across pages (chunking)\n", algo, e);
@ -3509,7 +3509,7 @@
memset(axbuf, 0, XBUFSIZE);
for (i = 0, j = 0; i < tcount; i++) {
@@ -388,6 +418,7 @@
@@ -388,6 +418,7 @@ next_one:
goto out;
}
@ -3517,7 +3517,7 @@
sg_init_table(sg, template[i].np);
for (k = 0, temp = 0; k < template[i].np; k++) {
memcpy(&xbuf[IDX[k]],
@@ -450,7 +481,7 @@
@@ -450,7 +481,7 @@ next_one:
for (k = 0, temp = 0; k < template[i].np; k++) {
printk(KERN_INFO "page %u\n", k);
@ -3526,7 +3526,7 @@
hexdump(q, template[i].tap[k]);
printk(KERN_INFO "%s\n",
memcmp(q, template[i].result + temp,
@@ -459,8 +490,15 @@
@@ -459,8 +490,15 @@ next_one:
0 : authsize)) ?
"fail" : "pass");
@ -3543,7 +3543,7 @@
}
}
}
@@ -473,7 +511,7 @@
@@ -473,7 +511,7 @@ out:
static void test_cipher(char *algo, int enc,
struct cipher_testvec *template, unsigned int tcount)
{
@ -3552,7 +3552,7 @@
char *q;
struct crypto_ablkcipher *tfm;
struct ablkcipher_request *req;
@@ -569,19 +607,17 @@
@@ -569,19 +607,17 @@ static void test_cipher(char *algo, int
goto out;
}
@ -3573,7 +3573,7 @@
j = 0;
for (i = 0; i < tcount; i++) {
@@ -596,6 +632,7 @@
@@ -596,6 +632,7 @@ static void test_cipher(char *algo, int
printk("test %u (%d bit key):\n",
j, template[i].klen * 8);
@ -3581,7 +3581,7 @@
crypto_ablkcipher_clear_flags(tfm, ~0);
if (template[i].wk)
crypto_ablkcipher_set_flags(
@@ -649,14 +686,21 @@
@@ -649,14 +686,21 @@ static void test_cipher(char *algo, int
temp = 0;
for (k = 0; k < template[i].np; k++) {
printk("page %u\n", k);
@ -3605,7 +3605,7 @@
}
}
}
@@ -1172,6 +1216,14 @@
@@ -1172,6 +1216,14 @@ static void do_test(void)
test_cipher("ecb(des3_ede)", DECRYPT, des3_ede_dec_tv_template,
DES3_EDE_DEC_TEST_VECTORS);
@ -3620,7 +3620,7 @@
test_hash("md4", md4_tv_template, MD4_TEST_VECTORS);
test_hash("sha224", sha224_tv_template, SHA224_TEST_VECTORS);
@@ -1382,6 +1434,14 @@
@@ -1382,6 +1434,14 @@ static void do_test(void)
DES3_EDE_ENC_TEST_VECTORS);
test_cipher("ecb(des3_ede)", DECRYPT, des3_ede_dec_tv_template,
DES3_EDE_DEC_TEST_VECTORS);
@ -3635,7 +3635,7 @@
break;
case 5:
@@ -1550,7 +1610,7 @@
@@ -1550,7 +1610,7 @@ static void do_test(void)
case 29:
test_hash("tgr128", tgr128_tv_template, TGR128_TEST_VECTORS);
break;
@ -3644,7 +3644,7 @@
case 30:
test_cipher("ecb(xeta)", ENCRYPT, xeta_enc_tv_template,
XETA_ENC_TEST_VECTORS);
@@ -1615,6 +1675,22 @@
@@ -1615,6 +1675,22 @@ static void do_test(void)
CTS_MODE_DEC_TEST_VECTORS);
break;
@ -3667,7 +3667,7 @@
case 100:
test_hash("hmac(md5)", hmac_md5_tv_template,
HMAC_MD5_TEST_VECTORS);
@@ -1650,6 +1726,16 @@
@@ -1650,6 +1726,16 @@ static void do_test(void)
XCBC_AES_TEST_VECTORS);
break;
@ -3684,7 +3684,7 @@
case 200:
test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0,
speed_template_16_24_32);
@@ -1788,6 +1874,22 @@
@@ -1788,6 +1874,22 @@ static void do_test(void)
test_hash_speed("sha224", sec, generic_hash_speed_template);
if (mode > 300 && mode < 400) break;
@ -3722,7 +3722,7 @@
*/
#ifndef _CRYPTO_TCRYPT_H
#define _CRYPTO_TCRYPT_H
@@ -168,6 +162,271 @@
@@ -168,6 +162,271 @@ static struct hash_testvec md5_tv_templa
.digest = "\x57\xed\xf4\xa2\x2b\xe3\xc9\x55"
"\xac\x49\xda\x2e\x21\x07\xb6\x7a",
}
@ -3994,7 +3994,7 @@
};
/*
@@ -817,6 +1076,168 @@
@@ -817,6 +1076,168 @@ static struct hash_testvec hmac_md5_tv_t
};
/*
@ -4163,7 +4163,7 @@
* HMAC-SHA1 test vectors from RFC2202
*/
#define HMAC_SHA1_TEST_VECTORS 7
@@ -1442,6 +1863,8 @@
@@ -1442,6 +1863,8 @@ static struct hash_testvec hmac_sha512_t
#define DES_CBC_DEC_TEST_VECTORS 4
#define DES3_EDE_ENC_TEST_VECTORS 3
#define DES3_EDE_DEC_TEST_VECTORS 3
@ -4172,7 +4172,7 @@
static struct cipher_testvec des_enc_tv_template[] = {
{ /* From Applied Cryptography */
@@ -1680,9 +2103,6 @@
@@ -1680,9 +2103,6 @@ static struct cipher_testvec des_cbc_dec
},
};
@ -4182,7 +4182,7 @@
static struct cipher_testvec des3_ede_enc_tv_template[] = {
{ /* These are from openssl */
.key = "\x01\x23\x45\x67\x89\xab\xcd\xef"
@@ -1745,6 +2165,94 @@
@@ -1745,6 +2165,94 @@ static struct cipher_testvec des3_ede_de
},
};
@ -4279,7 +4279,7 @@
*/
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -174,4 +174,30 @@
@@ -174,4 +174,30 @@ config CRYPTO_DEV_HIFN_795X_RNG
Select this option if you want to enable the random number generator
on the HIFN 795x crypto adapters.
@ -4312,7 +4312,7 @@
endif # CRYPTO_HW
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -2,3 +2,5 @@
@@ -2,3 +2,5 @@ obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) +=
obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
@ -4328,7 +4328,7 @@
#include <linux/crypto.h>
#include <linux/hw_random.h>
#include <linux/ktime.h>
@@ -369,7 +368,9 @@
@@ -369,7 +368,9 @@ static atomic_t hifn_dev_number;
#define HIFN_D_DST_RSIZE 80*4
#define HIFN_D_RES_RSIZE 24*4
@ -4339,7 +4339,7 @@
#define AES_MIN_KEY_SIZE 16
#define AES_MAX_KEY_SIZE 32
@@ -535,10 +536,10 @@
@@ -535,10 +536,10 @@ struct hifn_crypt_command
*/
struct hifn_mac_command
{
@ -4354,7 +4354,7 @@
};
#define HIFN_MAC_CMD_ALG_MASK 0x0001
@@ -564,10 +565,10 @@
@@ -564,10 +565,10 @@ struct hifn_mac_command
struct hifn_comp_command
{
@ -4369,7 +4369,7 @@
};
#define HIFN_COMP_CMD_SRCLEN_M 0xc000
@@ -583,10 +584,10 @@
@@ -583,10 +584,10 @@ struct hifn_comp_command
struct hifn_base_result
{
@ -4384,7 +4384,7 @@
};
#define HIFN_BASE_RES_DSTOVERRUN 0x0200 /* destination overrun */
@@ -597,8 +598,8 @@
@@ -597,8 +598,8 @@ struct hifn_base_result
struct hifn_comp_result
{
@ -4395,7 +4395,7 @@
};
#define HIFN_COMP_RES_LCB_M 0xff00 /* longitudinal check byte */
@@ -609,8 +610,8 @@
@@ -609,8 +610,8 @@ struct hifn_comp_result
struct hifn_mac_result
{
@ -4406,7 +4406,7 @@
/* followed by 0, 6, 8, or 10 u16's of the MAC, then crypt */
};
@@ -619,8 +620,8 @@
@@ -619,8 +620,8 @@ struct hifn_mac_result
struct hifn_crypt_result
{
@ -4417,7 +4417,7 @@
};
#define HIFN_CRYPT_RES_SRC_NOTZERO 0x0001 /* source expired */
@@ -686,12 +687,12 @@
@@ -686,12 +687,12 @@ static inline u32 hifn_read_1(struct hif
static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
{
@ -4432,7 +4432,7 @@
}
static void hifn_wait_puc(struct hifn_device *dev)
@@ -894,7 +895,7 @@
@@ -894,7 +895,7 @@ static int hifn_enable_crypto(struct hif
char *offtbl = NULL;
int i;
@ -4441,7 +4441,7 @@
if (pci2id[i].pci_vendor == dev->pdev->vendor &&
pci2id[i].pci_prod == dev->pdev->device) {
offtbl = pci2id[i].card_id;
@@ -1037,14 +1038,14 @@
@@ -1037,14 +1038,14 @@ static void hifn_init_registers(struct h
hifn_write_0(dev, HIFN_0_PUIER, HIFN_PUIER_DSTOVER);
/* write all 4 ring address registers */
@ -4464,7 +4464,7 @@
mdelay(2);
#if 0
@@ -1166,109 +1167,15 @@
@@ -1166,109 +1167,15 @@ static int hifn_setup_crypto_command(str
return cmd_len;
}
@ -4577,7 +4577,7 @@
buf_pos = buf = dma->command_bufs[dma->cmdi];
mask = 0;
@@ -1370,16 +1277,113 @@
@@ -1370,16 +1277,113 @@ static int hifn_setup_dma(struct hifn_de
hifn_write_1(dev, HIFN_1_DMA_CSR, HIFN_DMACSR_C_CTRL_ENA);
dev->flags |= HIFN_FLAG_CMD_BUSY;
}
@ -4695,7 +4695,7 @@
static int ablkcipher_walk_init(struct ablkcipher_walk *w,
int num, gfp_t gfp_flags)
{
@@ -1431,7 +1435,7 @@
@@ -1431,7 +1435,7 @@ static int ablkcipher_add(void *daddr, u
return -EINVAL;
while (size) {
@ -4704,7 +4704,7 @@
saddr = kmap_atomic(sg_page(src), KM_SOFTIRQ1);
memcpy(daddr, saddr + src->offset, copy);
@@ -1458,10 +1462,6 @@
@@ -1458,10 +1462,6 @@ static int ablkcipher_add(void *daddr, u
static int ablkcipher_walk(struct ablkcipher_request *req,
struct ablkcipher_walk *w)
{
@ -4715,7 +4715,7 @@
struct scatterlist *src, *dst, *t;
void *daddr;
unsigned int nbytes = req->nbytes, offset, copy, diff;
@@ -1477,16 +1477,14 @@
@@ -1477,16 +1477,14 @@ static int ablkcipher_walk(struct ablkci
dst = &req->dst[idx];
dprintk("\n%s: slen: %u, dlen: %u, soff: %u, doff: %u, offset: %u, "
@ -4738,7 +4738,7 @@
unsigned dlen = PAGE_SIZE;
t = &w->cache[idx];
@@ -1498,8 +1496,8 @@
@@ -1498,8 +1496,8 @@ static int ablkcipher_walk(struct ablkci
idx += err;
@ -4749,7 +4749,7 @@
if (dlen < nbytes) {
/*
@@ -1507,7 +1505,7 @@
@@ -1507,7 +1505,7 @@ static int ablkcipher_walk(struct ablkci
* to put there additional blocksized chunk,
* so we mark that page as containing only
* blocksize aligned chunks:
@ -4758,7 +4758,7 @@
* and increase number of bytes to be processed
* in next chunk:
* nbytes += diff;
@@ -1544,7 +1542,7 @@
@@ -1544,7 +1542,7 @@ static int ablkcipher_walk(struct ablkci
kunmap_atomic(daddr, KM_SOFTIRQ0);
} else {
@ -4767,7 +4767,7 @@
idx++;
}
@@ -1563,14 +1561,10 @@
@@ -1563,14 +1561,10 @@ static int hifn_setup_session(struct abl
struct hifn_context *ctx = crypto_tfm_ctx(req->base.tfm);
struct hifn_device *dev = ctx->dev;
struct page *spage, *dpage;
@ -4783,7 +4783,7 @@
if (ctx->iv && !ctx->ivsize && ctx->mode != ACRYPTO_MODE_ECB)
goto err_out_exit;
@@ -1578,17 +1572,14 @@
@@ -1578,17 +1572,14 @@ static int hifn_setup_session(struct abl
ctx->walk.flags = 0;
while (nbytes) {
@ -4805,7 +4805,7 @@
idx++;
}
@@ -1602,7 +1593,10 @@
@@ -1602,7 +1593,10 @@ static int hifn_setup_session(struct abl
idx = 0;
sg_num = ablkcipher_walk(req, &ctx->walk);
@ -4817,7 +4817,7 @@
atomic_set(&ctx->sg_num, sg_num);
spin_lock_irqsave(&dev->lock, flags);
@@ -1640,7 +1634,7 @@
@@ -1640,7 +1634,7 @@ static int hifn_setup_session(struct abl
if (err)
goto err_out;
@ -4826,7 +4826,7 @@
}
dev->active = HIFN_DEFAULT_ACTIVE_NUM;
@@ -1651,7 +1645,7 @@
@@ -1651,7 +1645,7 @@ static int hifn_setup_session(struct abl
err_out:
spin_unlock_irqrestore(&dev->lock, flags);
err_out_exit:
@ -4835,7 +4835,7 @@
dprintk("%s: iv: %p [%d], key: %p [%d], mode: %u, op: %u, "
"type: %u, err: %d.\n",
dev->name, ctx->iv, ctx->ivsize,
@@ -1745,8 +1739,7 @@
@@ -1745,8 +1739,7 @@ static int ablkcipher_get(void *saddr, u
return -EINVAL;
while (size) {
@ -4845,7 +4845,7 @@
daddr = kmap_atomic(sg_page(dst), KM_IRQ0);
memcpy(daddr + dst->offset + offset, saddr, copy);
@@ -1803,7 +1796,7 @@
@@ -1803,7 +1796,7 @@ static void hifn_process_ready(struct ab
sg_page(dst), dst->length, nbytes);
if (!t->length) {
@ -4854,7 +4854,7 @@
idx++;
continue;
}
@@ -2202,9 +2195,9 @@
@@ -2202,9 +2195,9 @@ static int hifn_setup_crypto(struct ablk
return err;
if (dev->started < HIFN_QUEUE_LENGTH && dev->queue.qlen)
@ -4866,7 +4866,7 @@
}
/*
@@ -2364,7 +2357,7 @@
@@ -2364,7 +2357,7 @@ static struct hifn_alg_template hifn_alg
* 3DES ECB, CBC, CFB and OFB modes.
*/
{
@ -4875,7 +4875,7 @@
.ablkcipher = {
.min_keysize = HIFN_3DES_KEY_LENGTH,
.max_keysize = HIFN_3DES_KEY_LENGTH,
@@ -2374,7 +2367,7 @@
@@ -2374,7 +2367,7 @@ static struct hifn_alg_template hifn_alg
},
},
{
@ -4884,7 +4884,7 @@
.ablkcipher = {
.min_keysize = HIFN_3DES_KEY_LENGTH,
.max_keysize = HIFN_3DES_KEY_LENGTH,
@@ -2384,8 +2377,9 @@
@@ -2384,8 +2377,9 @@ static struct hifn_alg_template hifn_alg
},
},
{
@ -4895,7 +4895,7 @@
.min_keysize = HIFN_3DES_KEY_LENGTH,
.max_keysize = HIFN_3DES_KEY_LENGTH,
.setkey = hifn_setkey,
@@ -2394,7 +2388,7 @@
@@ -2394,7 +2388,7 @@ static struct hifn_alg_template hifn_alg
},
},
{
@ -4904,7 +4904,7 @@
.ablkcipher = {
.min_keysize = HIFN_3DES_KEY_LENGTH,
.max_keysize = HIFN_3DES_KEY_LENGTH,
@@ -2408,7 +2402,7 @@
@@ -2408,7 +2402,7 @@ static struct hifn_alg_template hifn_alg
* DES ECB, CBC, CFB and OFB modes.
*/
{
@ -4913,7 +4913,7 @@
.ablkcipher = {
.min_keysize = HIFN_DES_KEY_LENGTH,
.max_keysize = HIFN_DES_KEY_LENGTH,
@@ -2418,7 +2412,7 @@
@@ -2418,7 +2412,7 @@ static struct hifn_alg_template hifn_alg
},
},
{
@ -4922,7 +4922,7 @@
.ablkcipher = {
.min_keysize = HIFN_DES_KEY_LENGTH,
.max_keysize = HIFN_DES_KEY_LENGTH,
@@ -2428,8 +2422,9 @@
@@ -2428,8 +2422,9 @@ static struct hifn_alg_template hifn_alg
},
},
{
@ -4933,7 +4933,7 @@
.min_keysize = HIFN_DES_KEY_LENGTH,
.max_keysize = HIFN_DES_KEY_LENGTH,
.setkey = hifn_setkey,
@@ -2438,7 +2433,7 @@
@@ -2438,7 +2433,7 @@ static struct hifn_alg_template hifn_alg
},
},
{
@ -4942,7 +4942,7 @@
.ablkcipher = {
.min_keysize = HIFN_DES_KEY_LENGTH,
.max_keysize = HIFN_DES_KEY_LENGTH,
@@ -2452,7 +2447,7 @@
@@ -2452,7 +2447,7 @@ static struct hifn_alg_template hifn_alg
* AES ECB, CBC, CFB and OFB modes.
*/
{
@ -4951,7 +4951,7 @@
.ablkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
@@ -2462,8 +2457,9 @@
@@ -2462,8 +2457,9 @@ static struct hifn_alg_template hifn_alg
},
},
{
@ -4962,7 +4962,7 @@
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.setkey = hifn_setkey,
@@ -2472,7 +2468,7 @@
@@ -2472,7 +2468,7 @@ static struct hifn_alg_template hifn_alg
},
},
{
@ -4971,7 +4971,7 @@
.ablkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
@@ -2482,7 +2478,7 @@
@@ -2482,7 +2478,7 @@ static struct hifn_alg_template hifn_alg
},
},
{
@ -4980,7 +4980,7 @@
.ablkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
@@ -2514,15 +2510,14 @@
@@ -2514,15 +2510,14 @@ static int hifn_alg_alloc(struct hifn_de
return -ENOMEM;
snprintf(alg->alg.cra_name, CRYPTO_MAX_ALG_NAME, "%s", t->name);
@ -6510,7 +6510,7 @@
+
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -411,12 +411,12 @@
@@ -411,12 +411,12 @@ static int __init padlock_init(void)
int ret;
if (!cpu_has_xcrypt) {
@ -6527,7 +6527,7 @@
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -263,12 +263,12 @@
@@ -263,12 +263,12 @@ static int __init padlock_init(void)
int rc = -ENODEV;
if (!cpu_has_phe) {
@ -8606,7 +8606,7 @@
#define CRYPTO_ALG_TYPE_BLKCIPHER_MASK 0x0000000c
#define CRYPTO_ALG_LARVAL 0x00000010
@@ -102,6 +104,7 @@
@@ -102,6 +104,7 @@ struct crypto_async_request;
struct crypto_aead;
struct crypto_blkcipher;
struct crypto_hash;
@ -8614,7 +8614,7 @@
struct crypto_tfm;
struct crypto_type;
struct aead_givcrypt_request;
@@ -131,6 +134,16 @@
@@ -131,6 +134,16 @@ struct ablkcipher_request {
void *__ctx[] CRYPTO_MINALIGN_ATTR;
};
@ -8631,7 +8631,7 @@
/**
* struct aead_request - AEAD request
* @base: Common attributes for async crypto requests
@@ -195,6 +208,17 @@
@@ -195,6 +208,17 @@ struct ablkcipher_alg {
unsigned int ivsize;
};
@ -8649,7 +8649,7 @@
struct aead_alg {
int (*setkey)(struct crypto_aead *tfm, const u8 *key,
unsigned int keylen);
@@ -272,6 +296,7 @@
@@ -272,6 +296,7 @@ struct compress_alg {
#define cra_cipher cra_u.cipher
#define cra_digest cra_u.digest
#define cra_hash cra_u.hash
@ -8657,7 +8657,7 @@
#define cra_compress cra_u.compress
struct crypto_alg {
@@ -298,6 +323,7 @@
@@ -298,6 +323,7 @@ struct crypto_alg {
struct cipher_alg cipher;
struct digest_alg digest;
struct hash_alg hash;
@ -8665,7 +8665,7 @@
struct compress_alg compress;
} cra_u;
@@ -383,6 +409,18 @@
@@ -383,6 +409,18 @@ struct hash_tfm {
unsigned int digestsize;
};
@ -8684,7 +8684,7 @@
struct compress_tfm {
int (*cot_compress)(struct crypto_tfm *tfm,
const u8 *src, unsigned int slen,
@@ -397,6 +435,7 @@
@@ -397,6 +435,7 @@ struct compress_tfm {
#define crt_blkcipher crt_u.blkcipher
#define crt_cipher crt_u.cipher
#define crt_hash crt_u.hash
@ -8692,7 +8692,7 @@
#define crt_compress crt_u.compress
struct crypto_tfm {
@@ -409,6 +448,7 @@
@@ -409,6 +448,7 @@ struct crypto_tfm {
struct blkcipher_tfm blkcipher;
struct cipher_tfm cipher;
struct hash_tfm hash;

Some files were not shown because too many files have changed in this diff Show More

Loading…
Cancel
Save