From a04c3e73a33f9effc77511076bdbf8a0013a9574 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 24 Nov 2015 18:30:19 +0000 Subject: [PATCH] ar71xx: add GL-AR300 support V3 This is the patch for GL-AR300 V3, tested against the latest trunk. Signed-off-by: alzhao SVN-Revision: 47621 --- .../ar71xx/base-files/etc/board.d/01_leds | 4 + .../ar71xx/base-files/etc/board.d/02_network | 6 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-4.1 | 1 + .../files/arch/mips/ath79/mach-gl-ar300.c | 103 ++++++++++++++++++ target/linux/ar71xx/generic/profiles/gli.mk | 11 ++ target/linux/ar71xx/image/Makefile | 9 ++ .../912-MIPS-ath79-add-gl_ar300.patch | 39 +++++++ 9 files changed, 177 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c create mode 100644 target/linux/ar71xx/patches-4.1/912-MIPS-ath79-add-gl_ar300.patch diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 16a875805d..da3e5614d8 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -221,6 +221,10 @@ gl-ar150) ucidef_set_led_wlan "wlan" "WLAN" "gl_ar150:wlan" "phy0tpt" ;; +gl-ar300) + ucidef_set_led_wlan "wlan" "WLAN" "gl_ar300:wlan" "phy0tpt" + ;; + gl-inet) ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1" ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index de86ba54c8..a5a40a177d 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -408,6 +408,12 @@ wpe72) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; +gl-ar300) + ucidef_set_interfaces_lan_wan "eth1" "eth0" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4" + ;; + wpj344) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 75a75a4fd4..8eb9266d4a 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -485,6 +485,9 @@ ar71xx_board_detect() { *"GL AR150") name="gl-ar150" ;; + *"GL AR300") + name="gl-ar300" + ;; *"EnGenius EPG5000") name="epg5000" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index d90f724e64..e68a05bfc0 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -221,6 +221,7 @@ platform_check_image() { ew-dorin | \ ew-dorin-router | \ gl-ar150 | \ + gl-ar300 | \ hiwifi-hc6361 | \ hornet-ub-x2 | \ mzk-w04nu | \ diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1 index 51aadb706f..b217a436ab 100644 --- a/target/linux/ar71xx/config-4.1 +++ b/target/linux/ar71xx/config-4.1 @@ -77,6 +77,7 @@ CONFIG_ATH79_MACH_ESR900=y CONFIG_ATH79_MACH_EW_DORIN=y CONFIG_ATH79_MACH_F9K1115V2=y CONFIG_ATH79_MACH_GL_AR150=y +CONFIG_ATH79_MACH_GL_AR300=y CONFIG_ATH79_MACH_GL_INET=y CONFIG_ATH79_MACH_GS_MINIBOX_V1=y CONFIG_ATH79_MACH_GS_OOLITE=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c new file mode 100644 index 0000000000..47db6de188 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c @@ -0,0 +1,103 @@ +/* + * Domino board support + * + * Copyright (C) 2011 dongyuqi <729650915@qq.com> + * Copyright (C) 2011-2012 Gabor Juhos + * Copyright (C) 2013 alzhao + * Copyright (C) 2014 Michel Stempin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define GL_AR300_GPIO_LED_WLAN 13 +#define GL_AR300_GPIO_LED_WAN 14 +#define GL_AR300_GPIO_BTN_RESET 16 + + +#define GL_AR300_KEYS_POLL_INTERVAL 20 /* msecs */ +#define GL_AR300_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR300_KEYS_POLL_INTERVAL) + +#define GL_AR300_MAC0_OFFSET 0x0000 +#define GL_AR300_MAC1_OFFSET 0x0000 +#define GL_AR300_CALDATA_OFFSET 0x1000 +#define GL_AR300_WMAC_MAC_OFFSET 0x0000 + +static struct gpio_led gl_ar300_leds_gpio[] __initdata = { + { + .name = "gl_ar300:wlan", + .gpio = GL_AR300_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "gl_ar300:wan", + .gpio = GL_AR300_GPIO_LED_WAN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button gl_ar300_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = GL_AR300_KEYS_DEBOUNCE_INTERVAL, + .gpio = GL_AR300_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static void __init gl_ar300_setup(void) +{ + + /* ART base address */ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + /* register flash. */ + ath79_register_m25p80(NULL); + + /* register gpio LEDs and keys */ + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300_leds_gpio), + gl_ar300_leds_gpio); + ath79_register_gpio_keys_polled(-1, GL_AR300_KEYS_POLL_INTERVAL, + ARRAY_SIZE(gl_ar300_gpio_keys), + gl_ar300_gpio_keys); + + /* enable usb */ + ath79_register_usb(); + ath79_register_mdio(1, 0x0); + + /* register eth0 as WAN, eth1 as LAN */ + ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR300_MAC0_OFFSET, 0); + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(4); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_register_eth(0); + + ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR300_MAC1_OFFSET, 0); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_register_eth(1); + + /* register wireless mac with cal data */ + ath79_register_wmac(art + GL_AR300_CALDATA_OFFSET, art + GL_AR300_WMAC_MAC_OFFSET); +} + +MIPS_MACHINE(ATH79_MACH_GL_AR300, "GL-AR300", "GL AR300",gl_ar300_setup); diff --git a/target/linux/ar71xx/generic/profiles/gli.mk b/target/linux/ar71xx/generic/profiles/gli.mk index a6ad661666..c5873760a5 100644 --- a/target/linux/ar71xx/generic/profiles/gli.mk +++ b/target/linux/ar71xx/generic/profiles/gli.mk @@ -25,3 +25,14 @@ define Profile/GL-AR150/Description endef $(eval $(call Profile,GL-AR150)) + +define Profile/GL-AR300 + NAME:=GL AR300 + PACKAGES:=kmod-usb-core kmod-usb2 +endef + +define Profile/GL-AR300/Description + Configuration of GL AR300. +endef + +$(eval $(call Profile,GL-AR300)) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index bb97764df2..e0eea98560 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -196,6 +196,15 @@ define Device/gl-ar150 endef TARGET_DEVICES += gl-ar150 +define Device/gl-ar300 + BOARDNAME = GL-AR300 + IMAGE_SIZE = 16000k + CONSOLE = ttyS0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += gl-ar300 + + define Device/wndr3700 BOARDNAME = WNDR3700 NETGEAR_KERNEL_MAGIC = 0x33373030 diff --git a/target/linux/ar71xx/patches-4.1/912-MIPS-ath79-add-gl_ar300.patch b/target/linux/ar71xx/patches-4.1/912-MIPS-ath79-add-gl_ar300.patch new file mode 100644 index 0000000000..6ca9913b2d --- /dev/null +++ b/target/linux/ar71xx/patches-4.1/912-MIPS-ath79-add-gl_ar300.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -587,6 +587,16 @@ config ATH79_MACH_GL_AR150 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_GL_AR300 ++ bool "GL_AR300 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_GL_INET + bool "GL-INET support" + select SOC_AR933X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -84,6 +84,7 @@ obj-$(CONFIG_ATH79_MACH_EPG5000) += mach + obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o + obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o + obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o ++obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o + obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o + obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o + obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -73,6 +73,7 @@ enum ath79_mach_type { + ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ + ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ + ATH79_MACH_GL_AR150, /* GL-AR150 support */ ++ ATH79_MACH_GL_AR300, /* GL-AR300 */ + ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ + ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */ + ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */