mxs: remove 3.13

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42651
master
Zoltan Herpai 10 years ago
parent 5105e10608
commit 9c43ea9a8b
  1. 280
      target/linux/mxs/config-3.13
  2. 2842
      target/linux/mxs/patches-3.13/100-soc-audio-support.patch
  3. 39
      target/linux/mxs/patches-3.13/101-soc-audio-dts.patch
  4. 25
      target/linux/mxs/patches-3.13/105-dt-add-dcp.patch
  5. 14
      target/linux/mxs/patches-3.13/110-dt-add-lradc.patch
  6. 79
      target/linux/mxs/patches-3.13/120-dt-add-i2c.patch
  7. 53
      target/linux/mxs/patches-3.13/200-duckbill.patch

@ -1,280 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_AMBA_PL08X is not set
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_CPU_AUTO=y
# CONFIG_ARCH_MULTI_V4T is not set
CONFIG_ARCH_MULTI_V4_V5=y
CONFIG_ARCH_MULTI_V5=y
CONFIG_ARCH_MXS=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_ARCH_NR_GPIO=0
# CONFIG_ARCH_NSPIRE is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
# CONFIG_ARCH_WM8505 is not set
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_NR_BANKS=8
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_THUMB=y
CONFIG_ATAGS=y
CONFIG_AUTO_ZRELADDR=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
CONFIG_COMMON_CLK=y
CONFIG_COREDUMP=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_ARM926T=y
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_PM=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_USE_DOMAINS=y
CONFIG_CRC16=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_UART_PL01X is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DTC=y
# CONFIG_DW_DMAC_CORE is not set
CONFIG_EXT4_FS=y
CONFIG_FEC=y
CONFIG_FRAME_POINTER=y
CONFIG_FS_MBCACHE=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_MXS=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_BPF_JIT=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_MUX=y
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MXS=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_PERIODIC_RTC_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
CONFIG_IIO_TRIGGER=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INPUT=y
CONFIG_IOMMU_HELPER=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
# CONFIG_ISDN is not set
CONFIG_JBD2=y
CONFIG_KTIME_SCALAR=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_MXS=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MXS_DMA=y
# CONFIG_MXS_LRADC is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_NLS=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PCI_SYSCALL is not set
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX23=y
CONFIG_PINCTRL_IMX28=y
CONFIG_PINCTRL_MXS=y
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PL330_DMA is not set
CONFIG_PM=y
CONFIG_PM_CLK=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_RUNTIME=y
CONFIG_PPS=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_PTP_1588_CLOCK=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_STMP is not set
CONFIG_SCHED_HRTICK=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_MXS_AUART=y
CONFIG_SERIAL_MXS_AUART_CONSOLE=y
CONFIG_SMSC_PHY=y
CONFIG_SOC_BUS=y
CONFIG_SOC_IMX23=y
CONFIG_SOC_IMX28=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MXS is not set
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_STMP_DEVICE=y
CONFIG_SWIOTLB=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UID16=y
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_MXS_PHY is not set
CONFIG_USB_OTG=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_USBNET=y
CONFIG_USE_OF=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_VFP is not set
CONFIG_WATCHDOG_CORE=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
# CONFIG_ZBUD is not set
CONFIG_ZONE_DMA_FLAG=0

File diff suppressed because it is too large Load Diff

@ -1,39 +0,0 @@
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -88,6 +88,25 @@
usbphy0: usbphy@8007c000 {
status = "okay";
};
+
+ codec: mxs-builtin-codec {
+ compatible = "fsl,mxs-builtin-codec";
+ reg = <0x80048000 0x2000>, <0x8004c000 0x2000>,
+ <0x8005c000 0x2000>;
+ reg-names = "audioout", "audioin", "rtc";
+ clocks = <&clks 31>;
+ clock-names = "filt";
+ };
+
+ platform_dai: mxs-builtin-cpu-dai {
+ compatible = "fsl,mxs-builtin-cpu-dai";
+ reg = <0x80048000 0x2000>, <0x8004c000 0x2000>,
+ <0x8005c000 0x2000>;
+ reg-names = "audioout", "audioin", "rtc";
+ interrupts = <8 6 4>;
+ dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+ dma-names = "rx", "tx";
+ };
};
};
@@ -122,4 +141,10 @@
gpios = <&gpio2 1 1>;
};
};
+
+ mxs-builtin-audio {
+ compatible = "fsl,mxs-builtin-audio";
+ audio-codec = <&codec>;
+ cpu-dai = <&platform_dai>;
+ };
};

@ -1,25 +0,0 @@
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -338,6 +338,7 @@
dcp@80028000 {
reg = <0x80028000 0x2000>;
+ interrupts = <52 53 54>;
status = "disabled";
};
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -66,6 +66,12 @@
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
};
+
+ dcp@80028000 {
+ status = "okay";
+ compatible = "fsl-dcp";
+ };
+
};
apbx@80040000 {

@ -1,14 +0,0 @@
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -113,6 +113,11 @@
dmas = <&dma_apbx 0>, <&dma_apbx 1>;
dma-names = "rx", "tx";
};
+
+ lradc@80050000 {
+ status = "okay";
+ fsl,lradc-touchscreen-wires = <4>;
+ };
};
};

@ -1,79 +0,0 @@
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -146,6 +146,39 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ i2c0_pins_a: i2c0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x01e0 /* MX23_PAD_I2C_SCL__I2C_SCL */
+ 0x01f0 /* MX23_PAD_I2C_SDA__I2C_SDA */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1171 /* MX23_PAD_LCD_ENABLE__I2C_SCL */
+ 0x1181 /* MX23_PAD_LCD_HSYNC__I2C_SDA */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2031 /* MX23_PAD_SSP1_DATA1__I2C_SCL */
+ 0x2041 /* MX23_PAD_SSP1_DATA2__I2C_SDA */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
auart0_pins_a: auart0@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -443,7 +476,12 @@
};
i2c@80058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx23-i2c";
reg = <0x80058000 0x2000>;
+ interrupts = <27>;
+ clock-frequency = <100000>;
dmas = <&dma_apbx 3>;
dma-names = "rx-tx";
status = "disabled";
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -79,6 +79,12 @@
status = "okay";
};
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
@@ -94,7 +100,7 @@
usbphy0: usbphy@8007c000 {
status = "okay";
};
-
+
codec: mxs-builtin-codec {
compatible = "fsl,mxs-builtin-codec";
reg = <0x80048000 0x2000>, <0x8004c000 0x2000>,

@ -1,53 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -164,6 +164,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb
imx28-cfa10057.dtb \
imx28-cfa10058.dtb \
imx28-evk.dtb \
+ imx28-duckbill.dtb \
imx28-m28cu3.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -157,6 +157,7 @@ enum mac_oui {
OUI_FSL,
OUI_DENX,
OUI_CRYSTALFONTZ,
+ OUI_I2SE,
};
static void __init update_fec_mac_prop(enum mac_oui oui)
@@ -211,6 +212,11 @@ static void __init update_fec_mac_prop(e
macaddr[1] = 0xb9;
macaddr[2] = 0xe1;
break;
+ case OUI_I2SE:
+ macaddr[0] = 0x00;
+ macaddr[1] = 0x01;
+ macaddr[2] = 0x87;
+ break;
}
val = ocotp[i];
macaddr[3] = (val >> 16) & 0xff;
@@ -426,6 +432,11 @@ static int __init mxs_restart_init(void)
return 0;
}
+static void __init duckbill_init(void)
+{
+ update_fec_mac_prop(OUI_I2SE);
+}
+
static void __init mxs_machine_init(void)
{
struct device_node *root;
@@ -464,6 +475,8 @@ static void __init mxs_machine_init(void
crystalfontz_init();
else if (of_machine_is_compatible("msr,m28cu3"))
m28cu3_init();
+ else if (of_machine_is_compatible("i2se,duckbill"))
+ duckbill_init();
of_platform_populate(NULL, of_default_bus_match_table,
NULL, parent);
Loading…
Cancel
Save