ar71xx: add initial support for the TL-WR741ND v4 board

The ethernet port LEDs are not working yet.

SVN-Revision: 28706
master
Gabor Juhos 13 years ago
parent 21e651c9a1
commit 91f08d47c2
  1. 24
      target/linux/ar71xx/base-files/etc/defconfig/tl-wr741nd-v4/network
  2. 1
      target/linux/ar71xx/base-files/etc/diag.sh
  3. 1
      target/linux/ar71xx/base-files/etc/uci-defaults/leds
  4. 3
      target/linux/ar71xx/base-files/lib/ar71xx.sh
  5. 3
      target/linux/ar71xx/base-files/lib/upgrade/platform.sh
  6. 1
      target/linux/ar71xx/config-2.6.39
  7. 8
      target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
  8. 1
      target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
  9. 156
      target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd-v4.c

@ -0,0 +1,24 @@
config interface loopback
option ifname lo
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
config interface lan
option ifname eth0
option type bridge
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
config interface wan
option ifname eth1
option proto dhcp
config switch eth0
option enable_vlan 1
config switch_vlan
option device eth0
option vlan 1
option ports "0 1 2 3 4"

@ -91,6 +91,7 @@ get_status_led() {
tl-wa901nd-v2 | \
tl-wr1043nd | \
tl-wr741nd | \
tl-wr741nd-v4 | \
tl-wr841n-v1 | \
tl-wr941nd)
status_led="tp-link:green:system"

@ -104,6 +104,7 @@ tl-mr3420 )
set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
;;
tl-wr741nd-v4 | \
tl-wr941nd)
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;

@ -136,6 +136,9 @@ ar71xx_board_name() {
*TL-WR741ND)
name="tl-wr741nd"
;;
*"TL-WR741ND v4")
name="tl-wr741nd-v4"
;;
*"TL-WR841N v1")
name="tl-wr841n-v1"
;;

@ -87,7 +87,8 @@ platform_check_image() {
}
return 0
;;
tl-mr3220 | tl-mr3420 | tl-wa901nd | tl-wa901nd-v2 | tl-wr703n | tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
tl-mr3220 | tl-mr3420 | tl-wa901nd | tl-wa901nd-v2 | tl-wr703n | tl-wr741nd | tl-wr741nd-v4 | \
tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
[ "$magic" != "0100" ] && {
echo "Invalid image type."
return 1

@ -42,6 +42,7 @@ CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR703N=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR741ND_V4=y
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y

@ -284,6 +284,14 @@ config AR71XX_MACH_TL_WR741ND
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
config AR71XX_MACH_TL_WR741ND_V4
bool "TP-LINK TL-WR741ND v4 support"
select SOC_AR933X
select AR71XX_DEV_M25P80
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_AR9XXX_WMAC
config AR71XX_MACH_TL_WR841N_V1
bool "TP-LINK TL-WR841N v1 support"
select SOC_AR71XX

@ -55,6 +55,7 @@ obj-$(CONFIG_AR71XX_MACH_TL_MR3X20) += mach-tl-mr3x20.o
obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o

@ -0,0 +1,156 @@
/*
* TP-LINK TL-WR741ND v4 board support
*
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/flash.h>
#include <linux/gpio.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
#include "devices.h"
#include "dev-ar9xxx-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#define TL_WR741NDV4_GPIO_BTN_RESET 11
#define TL_WR741NDV4_GPIO_BTN_WPS 26
#define TL_WR741NDV4_GPIO_LED_WLAN 0
#define TL_WR741NDV4_GPIO_LED_QSS 1
#define TL_WR741NDV4_GPIO_LED_SYSTEM 27
#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */
#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL)
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition tl_wr741ndv4_parts[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x020000,
.size = 0x100000,
}, {
.name = "rootfs",
.offset = 0x120000,
.size = 0x2d0000,
}, {
.name = "art",
.offset = 0x3f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "firmware",
.offset = 0x020000,
.size = 0x3d0000,
}
};
#define tl_wr741ndv4_nr_parts ARRAY_SIZE(tl_wr741ndv4_parts)
#else
#define tl_wr741ndv4_parts NULL
#define tl_wr741ndv4_nr_parts 0
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data tl_wr741ndv4_flash_data = {
.parts = tl_wr741ndv4_parts,
.nr_parts = tl_wr741ndv4_nr_parts,
};
static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = {
{
.name = "tp-link:green:system",
.gpio = TL_WR741NDV4_GPIO_LED_SYSTEM,
.active_low = 1,
}, {
.name = "tp-link:green:qss",
.gpio = TL_WR741NDV4_GPIO_LED_QSS,
.active_low = 0,
}, {
.name = "tp-link:green:wlan",
.gpio = TL_WR741NDV4_GPIO_LED_WLAN,
.active_low = 0,
},
};
static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WR741NDV4_GPIO_BTN_RESET,
.active_low = 1,
} , {
.desc = "WPS",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WR741NDV4_GPIO_BTN_WPS,
.active_low = 1,
}
};
static void __init tl_wr741ndv4_gmac_setup(void)
{
void __iomem *base;
u32 t;
base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE);
t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
t |= (AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
__raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG);
iounmap(base);
}
static void __init tl_wr741ndv4_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
tl_wr741ndv4_gmac_setup();
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio),
tl_wr741ndv4_leds_gpio);
ar71xx_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
tl_wr741ndv4_gpio_keys);
ar71xx_add_device_m25p80(&tl_wr741ndv4_flash_data);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.phy_mask = BIT(4);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.has_ar7240_switch = 1;
ar71xx_add_device_mdio(0x0);
ar71xx_add_device_eth(1);
ar71xx_add_device_eth(0);
ar9xxx_add_device_wmac(ee, mac);
}
MIPS_MACHINE(AR71XX_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
"TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
Loading…
Cancel
Save