Add generic wpa_supplicant calls and use them for mac80211 and madwifi.

SVN-Revision: 12289
master
Florian Fainelli 17 years ago
parent 89a9d76c8b
commit 8c8b85b54c
  1. 33
      package/mac80211/files/lib/wifi/mac80211.sh
  2. 84
      package/madwifi/files/lib/wifi/madwifi.sh
  3. 2
      package/wpa_supplicant/Makefile
  4. 78
      package/wpa_supplicant/files/wpa_supplicant.sh

@ -55,6 +55,7 @@ enable_mac80211() {
for vif in $vifs; do
config_get ifname "$vif" ifname
config_get enc "$vif" encryption
config_get eap_type "$vif" eap_type
config_get mode "$vif" mode
config_get ifname "$vif" ifname
@ -145,30 +146,14 @@ enable_mac80211() {
fi
;;
sta)
case "$enc" in
PSK|psk|PSK2|psk2)
case "$enc" in
PSK|psk)
proto='proto=WPA';;
PSK2|psk2)
proto='proto=RSN';;
esac
cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
ctrl_interface=/var/run/wpa_supplicant
network={
scan_ssid=1
ssid="$ssid"
key_mgmt=WPA-PSK
$proto
psk="$key"
}
EOF
;;
WPA|wpa|WPA2|wpa2)
#add wpa_supplicant calls here
;;
esac
[ -z "$proto" ] || wpa_supplicant ${bridge:+ -b $bridge} -B -D wext -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
wpa_supplicant_setup_vif "$vif" wext || {
echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
# make sure this wifi interface won't accidentally stay open without encryption
ifconfig "$ifname" down
continue
}
fi
;;
esac
first=0

@ -262,7 +262,7 @@ enable_atheros() {
if eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
hostapd_setup_vif "$vif" madwifi || {
echo "enable_atheros($device): Failed to set up wpa for interface $ifname" >&2
echo "enable_atheros($device): Failed to set up hostapd for interface $ifname" >&2
# make sure this wifi interface won't accidentally stay open without encryption
ifconfig "$ifname" down
wlanconfig "$ifname" destroy
@ -271,80 +271,14 @@ enable_atheros() {
fi
;;
wds|sta)
config_get_bool usepassphrase "$vif" passphrase 1
case "$enc" in
PSK|psk|PSK2|psk2)
case "$enc" in
PSK|psk)
proto='proto=WPA'
if [ "$usepassphrase" = "1" ]; then
passphrase="psk=\"${key}\""
else
passphrase="psk=${key}"
fi
;;
PSK2|psk2)
proto='proto=RSN'
if [ "$usepassphrase" = "1" ]; then
passphrase="psk=\"${key}\""
else
passphrase="psk=${key}"
fi
;;
esac
cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
network={
scan_ssid=1
ssid="$ssid"
key_mgmt=WPA-PSK
$proto
$passphrase
}
EOF
;;
WPA|wpa|WPA2|wpa2i|8021x|8021X)
config_get ca_cert "$vif" ca_cert
eap_type=$(echo $eap_type | tr 'a-z' 'A-Z')
case "$eap_type" in
tls|TLS)
proto='proto=WPA2'
pairwise='pairwise=CCMP'
group='group=CCMP'
config_get priv_key "$vif" priv_key
config_get priv_key_pwd "$vif" priv_key_pwd
priv_key="private_key=\"$priv_key\""
priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
;;
peap|PEAP|ttls|TTLS)
proto='proto=WPA2'
config_get auth "$vif" auth
config_get identity "$vif" identity
config_get password "$vif" password
phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
identity="identity=\"$identity\""
password="password=\"$password\""
;;
esac
cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
network={
scan_ssid=1
ssid="$ssid"
key_mgmt=WPA-EAP
$proto
$pairwise
$group
eap=$eap_type
ca_cert="$ca_cert"
$priv_key
$priv_key_pwd
$phase2
$identity
$password
}
EOF
;;
esac
[ -z "$proto" ] || wpa_supplicant ${bridge:+ -b $bridge} -B -D madwifi -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
wpa_supplicant_setup_vif "$vif" madwifi || {
echo "enable_atheros($device): Failed to set up wpa_supplicant for interface $ifname" >&2
ifconfig "$ifname" down
wlanconfig "$ifname" destroy
continue
}
fi
;;
esac
first=0

@ -75,6 +75,8 @@ define Package/wpa-supplicant/install
$(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant \
$(PKG_BUILD_DIR)/wpa_supplicant/wpa_passphrase \
$(1)/usr/sbin/
$(INSTALL_DIR) $(1)/lib/wifi
$(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh
endef
define Package/wpa-cli/install

@ -0,0 +1,78 @@
wpa_supplicant_setup_vif() {
local vif="$1"
local driver="$2"
# wpa_supplicant should use wext for mac80211 cards
[ "$driver" = "mac80211" ] && driver='wext'
case "$enc" in
PSK|psk|psk2|PSK2)
key_mgmt='WPA-PSK'
config_get_bool usepassphrase "$vif" passphrase 1
case "$enc" in
psk|PSK)
proto='WPA'
if [ "$usepassphrase" = "1" ]; then
passphrase="psk=\"${key}\""
else
passphrase="psk=${key}"
fi
;;
psk2|PSK2)
proto='RSN'
if [ "$usepassphrase" = "1" ]; then
passphrase="psk=\"${key}\""
else
passphrase="psk=${key}"
fi
;;
esac
;;
WPA|wpa|WPA2|wpa2i|8021x|8021X)
proto='WPA2'
key_mgmt='WPA-EAP'
config_get ca_cert "$vif" ca_cert
case "$eap_type" in
tls|TLS)
pairwise='pairwise=CCMP'
group='group=CCMP'
config_get priv_key "$vif" priv_key
config_get priv_key_pwd "$vif" priv_key_pwd
priv_key="private_key=\"$priv_key\""
priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
;;
peap|PEAP|ttls|TTLS)
config_get auth "$vif" auth
config_get identity "$vif" identity
config_get password "$vif" password
phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
identity="identity=\"$identity\""
password="password=\"$password\""
;;
esac
;;
esac
config_get ifname "$vif" ifname
config_get bridge "$vif" bridge
config_get ssid "$vif" ssid
eap_type=$(echo $eap_type | tr 'a-z' 'A-Z')
cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
network={
scan_ssid=1
ssid="$ssid"
key_mgmt=$key_mgmt
proto=$proto
$passphrase
$pairwise
$group
eap=$eap_type
ca_cert="$ca_cert"
$priv_key
$priv_key_pwd
$phase2
$identity
$password
}
EOF
[ -z "$proto" ] || wpa_supplicant ${bridge:+ -b $bridge} -B -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
}
Loading…
Cancel
Save