ramips: add user-space support for the Planex MZK-W300NH2 Router

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926

target/linux/ramips/base-files/etc/diag.sh

@@ -122,6 +122,9 @@ get_status_led() {
 	wr512-3gn)
 		status_led="wr512:green:wps"
 		;;
+	mzk-w300nh2)
+		status_led="mzkw300nh2:green:power"
+		;;
 	ur-336un)
 		status_led="ur336:green:wps"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -88,6 +88,7 @@ case "$FIRMWARE" in
 	wli-tx4-ag300n | \
 	wr512-3gn | \
 	wr6202 | \
+	mzk-w300nh2 | \
 	ur-336un | \
 	xdxrn502j)
 		rt2x00_eeprom_extract "factory" 0 272

target/linux/ramips/base-files/etc/uci-defaults/leds

@@ -69,6 +69,9 @@ case $board in
 	mofi3500-3gn)
 		set_usb_led "mofi3500-3gn:green:usb"
 		;;
+	mzk-w300nh2)
+		set_wifi_led "mzkw300nh2:amber:wlan"
+		;;
 	nw718)
 		set_usb_led "nw718:amber:usb"
 		;;

target/linux/ramips/base-files/etc/uci-defaults/network

@@ -71,6 +71,13 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "2" "0 6t"
 		;;
 
+	mzk-w300nh2)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
+		ucidef_add_switch_vlan "switch0" "2" "4 6t"
+		;;
+
 	f5d8235-v1 | \
 	f5d8235-v2 | \
 	ur-336un)
@@ -145,6 +152,7 @@ ramips_setup_macs()
 	bc2 | \
 	broadway | \
 	f5d8235-v1 | \
+	mzk-w300nh2 | \
 	nw718 | \
 	psr-680w | \
 	rt-n15 | \

target/linux/ramips/base-files/lib/preinit/06_set_iface_mac

@@ -9,6 +9,7 @@ preinit_set_mac_address() {
 
 	case $(ramips_board_name) in
 	3g-6200n |\
+	mzk-w300nh2 |\
 	wl-330n |\
 	wl-330n3g)
 		mac=$(ramips_get_mac_binary factory 4)

target/linux/ramips/base-files/lib/ramips.sh

@@ -140,6 +140,9 @@ ramips_board_name() {
 	*"Petatel PSR-680W"*)
 		name="psr-680w"
 		;;
+	*"Planex MZK-W300NH2"*)
+		name="mzk-w300nh2"
+		;;
 	*"PWH2004")
 		name="pwh2004"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -35,6 +35,7 @@ platform_check_image() {
 	freestation5 | \
 	hw550-3g | \
 	mofi3500-3gn | \
+	mzk-w300nh2 | \
 	nbg-419n | \
 	nw718 | \
 	omni-emb | \