oxnas: move PCIe controller outside of simple-bus

Move PCIe controller outside down to SoC level to avoid resource
mapping problems.
Also add more detailed error handling when mapping registers.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
master
Daniel Golle 6 years ago
parent a18d41996e
commit 8ad0ba3a07
  1. 31
      target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
  2. 176
      target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch
  3. 6
      target/linux/oxnas/patches-4.14/500-oxnas-sata.patch

@ -420,34 +420,51 @@ oxnas_pcie_map_registers(struct platform_device *pdev,
u32 pcie_ctrl_offset;
ret = of_address_to_resource(np, 0, &regs);
if (ret)
if (ret) {
dev_err(&pdev->dev, "failed to parse base register space\n");
return -EINVAL;
}
pcie->base = devm_ioremap_resource(&pdev->dev, &regs);
if (!pcie->base)
if (!pcie->base) {
dev_err(&pdev->dev, "failed to map base register space\n");
return -ENOMEM;
}
ret = of_address_to_resource(np, 1, &regs);
if (ret)
if (ret) {
dev_err(&pdev->dev, "failed to parse inbound register space\n");
return -EINVAL;
}
pcie->inbound = devm_ioremap_resource(&pdev->dev, &regs);
if (!pcie->inbound)
if (!pcie->inbound) {
dev_err(&pdev->dev, "failed to map inbound register space\n");
return -ENOMEM;
}
pcie->phy = devm_of_phy_get(&pdev->dev, np, NULL);
if (IS_ERR(pcie->phy)) {
if (PTR_ERR(pcie->phy) == -EPROBE_DEFER)
if (PTR_ERR(pcie->phy) == -EPROBE_DEFER) {
dev_err(&pdev->dev, "failed to probe phy\n");
return PTR_ERR(pcie->phy);
}
dev_warn(&pdev->dev, "phy not attached\n");
pcie->phy = NULL;
}
if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
&outbound_ctrl_offset))
&outbound_ctrl_offset)) {
dev_err(&pdev->dev, "failed to parse outbound register offset\n");
return -EINVAL;
}
pcie->outbound_offset = outbound_ctrl_offset;
if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
&pcie_ctrl_offset))
&pcie_ctrl_offset)) {
dev_err(&pdev->dev, "failed to parse pcie-ctrl register offset\n");
return -EINVAL;
}
pcie->pcie_ctrl_offset = pcie_ctrl_offset;
return 0;

@ -22,93 +22,99 @@
--- a/arch/arm/boot/dts/ox820.dtsi
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -316,6 +316,89 @@
reg = <0x1000 0x1000>,
@@ -288,7 +288,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- ranges = <0 0x47000000 0x1000000>;
+ ranges = <0 0x47000000 0x2000>;
scu: scu@0 {
compatible = "arm,arm11mp-scu";
@@ -317,5 +317,86 @@
<0x100 0x500>;
};
+
+ pcie0: pcie-controller@c00000 {
+ compatible = "plxtech,nas782x-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* flag & space bus address host address size */
+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000
+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000
+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000
+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>;
+
+ bus-range = <0x00 0x7f>;
+
+ /* cfg inbound translator */
+ reg = <0xc00000 0x1000>, <0xd00000 0x100>;
+
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+
+ #interrupt-cells = <1>;
+ /* wild card mask, match all bus address & interrupt specifier */
+ /* format: bus address mask, interrupt specifier mask */
+ /* each bit 1 means need match, 0 means ignored when match */
+ interrupt-map-mask = <0 0 0 0>;
+ /* format: a list of: bus address, interrupt specifier,
+ * parent interrupt controller & specifier */
+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>;
+
+ gpios = <&gpio1 12 0>;
+ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>;
+ clock-names = "pcie", "busclk";
+ resets = <&reset RESET_PCIEA>;
+ reset-names = "pcie";
+
+ plxtech,pcie-hcsl-bit = <2>;
+ plxtech,pcie-ctrl-offset = <0x120>;
+ plxtech,pcie-outbound-offset = <0x138>;
+ status = "disabled";
+ };
+
+ pcie1: pcie-controller@e00000 {
+ compatible = "plxtech,nas782x-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* flag & space bus address host address size */
+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000
+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000
+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000
+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>;
+
+ bus-range = <0x80 0xff>;
+
+ /* cfg inbound translator */
+ reg = <0xe00000 0x1000>, <0xf00000 0x100>;
+
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+
+ #interrupt-cells = <1>;
+ /* wild card mask, match all bus address & interrupt specifier */
+ /* format: bus address mask, interrupt specifier mask */
+ /* each bit 1 means need match, 0 means ignored when match */
+ interrupt-map-mask = <0 0 0 0>;
+ /* format: a list of: bus address, interrupt specifier,
+ * parent interrupt controller & specifier */
+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>;
+
+ /* gpios = <&gpio1 12 0>; */
+ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>;
+ clock-names = "pcie", "busclk";
+ resets = <&reset RESET_PCIEB>;
+ reset-names = "pcie";
+
+ plxtech,pcie-hcsl-bit = <3>;
+ plxtech,pcie-ctrl-offset = <0x124>;
+ plxtech,pcie-outbound-offset = <0x174>;
+ status = "disabled";
+ };
+
};
+
+ pcie0: pcie-controller@47c00000 {
+ compatible = "plxtech,nas782x-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* flag & space bus address host address size */
+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000
+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000
+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000
+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>;
+
+ bus-range = <0x00 0x7f>;
+
+ /* cfg inbound translator */
+ reg = <0x47c00000 0x1000>, <0x47d00000 0x100>;
+
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+
+ #interrupt-cells = <1>;
+ /* wild card mask, match all bus address & interrupt specifier */
+ /* format: bus address mask, interrupt specifier mask */
+ /* each bit 1 means need match, 0 means ignored when match */
+ interrupt-map-mask = <0 0 0 0>;
+ /* format: a list of: bus address, interrupt specifier,
+ * parent interrupt controller & specifier */
+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>;
+ gpios = <&gpio1 12 0>;
+ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>;
+ clock-names = "pcie", "busclk";
+ resets = <&reset RESET_PCIEA>;
+ reset-names = "pcie";
+
+ plxtech,pcie-hcsl-bit = <2>;
+ plxtech,pcie-ctrl-offset = <0x120>;
+ plxtech,pcie-outbound-offset = <0x138>;
+ status = "disabled";
+ };
+
+ pcie1: pcie-controller@47e00000 {
+ compatible = "plxtech,nas782x-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* flag & space bus address host address size */
+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000
+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000
+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000
+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>;
+
+ bus-range = <0x80 0xff>;
+
+ /* cfg inbound translator */
+ reg = <0x47e00000 0x1000>, <0x47f00000 0x100>;
+
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+
+ #interrupt-cells = <1>;
+ /* wild card mask, match all bus address & interrupt specifier */
+ /* format: bus address mask, interrupt specifier mask */
+ /* each bit 1 means need match, 0 means ignored when match */
+ interrupt-map-mask = <0 0 0 0>;
+ /* format: a list of: bus address, interrupt specifier,
+ * parent interrupt controller & specifier */
+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>;
+
+ /* gpios = <&gpio1 12 0>; */
+ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>;
+ clock-names = "pcie", "busclk";
+ resets = <&reset RESET_PCIEB>;
+ reset-names = "pcie";
+
+ plxtech,pcie-hcsl-bit = <3>;
+ plxtech,pcie-ctrl-offset = <0x124>;
+ plxtech,pcie-outbound-offset = <0x174>;
+ status = "disabled";
+ };
};
};

@ -26,9 +26,9 @@
obj-$(CONFIG_PATA_ALI) += pata_ali.o
--- a/arch/arm/boot/dts/ox820.dtsi
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -400,5 +400,20 @@
};
@@ -398,5 +398,20 @@
plxtech,pcie-outbound-offset = <0x174>;
status = "disabled";
};
+
+ sata: sata@45900000 {

Loading…
Cancel
Save