Nicolas Thill
20 years ago
parent
e25d36a468
commit
87c8266371
@ -0,0 +1,16 @@ |
||||
system type : Broadcom BCM947XX |
||||
processor : 0 |
||||
cpu model : BCM4710 V0.0 |
||||
BogoMIPS : 82.94 |
||||
wait instruction : no |
||||
microsecond timers : yes |
||||
tlb_entries : 32 |
||||
extra interrupt vector : no |
||||
hardware watchpoint : no |
||||
VCED exceptions : not available |
||||
VCEI exceptions : not available |
||||
dcache hits : 2866936757 |
||||
dcache misses : 57830034 |
||||
icache hits : 1724839356 |
||||
icache misses : 431170605 |
||||
instructions : 2156850242 |
||||
@ -0,0 +1,96 @@ |
||||
CPU revision is: 00024000 |
||||
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. |
||||
Primary data cache 4kB, 2-way, linesize 16 bytes. |
||||
Linux version 2.4.29 (nthill@mr-grey) (gcc version 3.3.5) #1 Tue Mar 1 19:49:53 CET 2005 |
||||
Determined physical RAM map: |
||||
memory: 01000000 @ 00000000 (usable) |
||||
On node 0 totalpages: 4096 |
||||
zone(0): 4096 pages. |
||||
zone(1): 0 pages. |
||||
zone(2): 0 pages. |
||||
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 |
||||
CPU: BCM4710 rev 0 at 125 MHz |
||||
Using 62.400 MHz high precision timer. |
||||
!unable to setup serial console! |
||||
Calibrating delay loop... 82.94 BogoMIPS |
||||
Memory: 14044k/16384k available (1485k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) |
||||
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) |
||||
Inode cache hash table entries: 1024 (order: 1, 8192 bytes) |
||||
Mount cache hash table entries: 512 (order: 0, 4096 bytes) |
||||
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) |
||||
Page-cache hash table entries: 4096 (order: 2, 16384 bytes) |
||||
Checking for 'wait' instruction... unavailable. |
||||
POSIX conformance testing by UNIFIX |
||||
PCI: Fixing up bus 0 |
||||
PCI: Fixing up bridge |
||||
PCI: Setting latency timer of device 01:00.0 to 64 |
||||
PCI: Fixing up bus 1 |
||||
Linux NET4.0 for Linux 2.4 |
||||
Based upon Swansea University Computer Society NET3.039 |
||||
Initializing RT netlink socket |
||||
Starting kswapd |
||||
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) |
||||
devfs: boot_options: 0x1 |
||||
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. |
||||
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher |
||||
pty: 256 Unix98 ptys configured |
||||
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled |
||||
Software Watchdog Timer: 0.05, timer margin: 60 sec |
||||
loop: loaded (max 8 devices) |
||||
PPP generic driver version 2.4.2 |
||||
Amd/Fujitsu Extended Query Table v1.1 at 0x0040 |
||||
Physically mapped flash: Swapping erase regions for broken CFI table. |
||||
number of CFI chips: 1 |
||||
cfi_cmdset_0002: Disabling fast programming due to code brokenness. |
||||
Flash device: 0x400000 at 0x1fc00000 |
||||
Creating 5 MTD partitions on "Physically mapped flash": |
||||
0x00000000-0x00040000 : "pmon" |
||||
0x00040000-0x003f0000 : "linux" |
||||
0x000edd94-0x001fd000 : "rootfs" |
||||
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only |
||||
0x003f0000-0x00400000 : "nvram" |
||||
0x00200000-0x003f0000 : "OpenWrt" |
||||
sflash: chipcommon not found |
||||
Initializing Cryptographic API |
||||
NET4: Linux TCP/IP 1.0 for NET4.0 |
||||
IP Protocols: ICMP, UDP, TCP, IGMP |
||||
IP: routing cache hash table of 512 buckets, 4Kbytes |
||||
TCP: Hash tables configured (established 1024 bind 2048) |
||||
ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack |
||||
ip_tables: (C) 2000-2002 Netfilter core team |
||||
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. |
||||
NET4: Ethernet Bridge 008 for NET4.0 |
||||
Bridge firewalling registered |
||||
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> |
||||
All bugs added by David S. Miller <davem@redhat.com> |
||||
VFS: Mounted root (squashfs filesystem) readonly. |
||||
Mounted devfs on /dev |
||||
Freeing unused kernel memory: 100k freed |
||||
Warning: unable to open an initial console. |
||||
Algorithmics/MIPS FPU Emulator v1.5 |
||||
diag boardtype: 0000041a |
||||
using v1 hardware |
||||
jffs2.bbc: SIZE compression mode activated. |
||||
PCI: Setting latency timer of device 00:02.0 to 64 |
||||
5325E phy=FFFFFFFF |
||||
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 |
||||
PCI: Setting latency timer of device 00:08.0 to 64 |
||||
5325E phy=FFFFFFFF |
||||
eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 |
||||
PCI: Setting latency timer of device 01:08.0 to 64 |
||||
PCI: Enabling device 01:08.0 (0004 -> 0006) |
||||
eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 |
||||
device eth0 entered promiscuous mode |
||||
vlan2: add 01:00:5e:00:00:01 mcast address to master interface |
||||
device eth1 entered promiscuous mode |
||||
device eth2 entered promiscuous mode |
||||
br0: port 3(eth2) entering learning state |
||||
br0: port 2(eth1) entering learning state |
||||
br0: port 1(vlan2) entering learning state |
||||
br0: port 3(eth2) entering forwarding state |
||||
br0: topology change detected, propagating |
||||
br0: port 2(eth1) entering forwarding state |
||||
br0: topology change detected, propagating |
||||
br0: port 1(vlan2) entering forwarding state |
||||
br0: topology change detected, propagating |
||||
vlan1: add 01:00:5e:00:00:01 mcast address to master interface |
||||
@ -0,0 +1,54 @@ |
||||
br0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 |
||||
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 |
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 |
||||
RX packets:6022 errors:0 dropped:0 overruns:0 frame:0 |
||||
TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0 |
||||
collisions:0 txqueuelen:0 |
||||
RX bytes:356276 (347.9 KiB) TX bytes:457411 (446.6 KiB) |
||||
|
||||
eth0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 |
||||
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 |
||||
RX packets:6204 errors:0 dropped:0 overruns:0 frame:0 |
||||
TX packets:5774 errors:0 dropped:0 overruns:0 carrier:0 |
||||
collisions:0 txqueuelen:1000 |
||||
RX bytes:514297 (502.2 KiB) TX bytes:484047 (472.7 KiB) |
||||
Interrupt:3 Base address:0x2000 |
||||
|
||||
eth1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:56 |
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 |
||||
RX packets:0 errors:0 dropped:0 overruns:0 frame:0 |
||||
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 |
||||
collisions:0 txqueuelen:1000 |
||||
RX bytes:0 (0.0 B) TX bytes:7209 (7.0 KiB) |
||||
Interrupt:4 Base address:0x8000 |
||||
|
||||
eth2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:57 |
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 |
||||
RX packets:0 errors:0 dropped:0 overruns:0 frame:2202 |
||||
TX packets:93 errors:36 dropped:0 overruns:0 carrier:0 |
||||
collisions:0 txqueuelen:1000 |
||||
RX bytes:0 (0.0 B) TX bytes:11951 (11.6 KiB) |
||||
Interrupt:6 Base address:0x2000 |
||||
|
||||
lo Link encap:Local Loopback |
||||
inet addr:127.0.0.1 Mask:255.0.0.0 |
||||
UP LOOPBACK RUNNING MTU:16436 Metric:1 |
||||
RX packets:0 errors:0 dropped:0 overruns:0 frame:0 |
||||
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 |
||||
collisions:0 txqueuelen:0 |
||||
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) |
||||
|
||||
vlan1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 |
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 |
||||
RX packets:181 errors:0 dropped:0 overruns:0 frame:0 |
||||
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 |
||||
collisions:0 txqueuelen:0 |
||||
RX bytes:19634 (19.1 KiB) TX bytes:3564 (3.4 KiB) |
||||
|
||||
vlan2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 |
||||
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 |
||||
RX packets:6023 errors:0 dropped:0 overruns:0 frame:0 |
||||
TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0 |
||||
collisions:0 txqueuelen:0 |
||||
RX bytes:382991 (374.0 KiB) TX bytes:480483 (469.2 KiB) |
||||
|
||||
@ -0,0 +1,23 @@ |
||||
Linksys WRT54G v1.1 |
||||
|
||||
Online Description from Linksys: |
||||
http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 |
||||
|
||||
CPU: BCM4710 at 125 MHz |
||||
RAM: 16 MB |
||||
Flash: 4 MB (AMD AM29LV320DT 2 M x 16-Bit) |
||||
1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller |
||||
1 Broadcom BCM4320 802.11 Wireless Controller |
||||
1 Infineon-ADMtek ADM6996L 5-ports Ethernet swith |
||||
serial port possible (but not used) |
||||
JTAG interface available (but not used) |
||||
|
||||
List of files: |
||||
nvram.txt: contents of NVRAM after 'mtd erase' and OpenWRT upgrade |
||||
cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) |
||||
pci.txt: contents of /proc/pci (2.4.29) |
||||
dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 |
||||
lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported) |
||||
|
||||
-- |
||||
Nico |
||||
@ -0,0 +1,92 @@ |
||||
0000:00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803 |
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- |
||||
Interrupt: pin ? routed to IRQ 6 |
||||
Region 0: Memory at 18000000 (32-bit, non-prefetchable) [disabled] [size=4K] |
||||
Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=128M] |
||||
Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M] |
||||
Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=80000000] |
||||
Expansion ROM at <unassigned> [disabled] [size=2K] |
||||
|
||||
0000:00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0 |
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- |
||||
Interrupt: pin B routed to IRQ 5 |
||||
Region 0: Memory at 18001000 (32-bit, non-prefetchable) [disabled] [size=4K] |
||||
Expansion ROM at <unassigned> [disabled] [size=2K] |
||||
|
||||
0000:00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller |
||||
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- |
||||
Latency: 64 |
||||
Interrupt: pin A routed to IRQ 3 |
||||
Region 0: Memory at 18002000 (32-bit, non-prefetchable) [disabled] [size=4K] |
||||
Expansion ROM at <unassigned> [disabled] [size=2K] |
||||
|
||||
0000:00:03.0 Modem: Broadcom Corporation Sentry5 UART (prog-if 00 [Generic]) |
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- |
||||
Interrupt: pin C routed to IRQ 2 |
||||
Region 0: Memory at 18003000 (32-bit, non-prefetchable) [disabled] [size=4K] |
||||
Expansion ROM at <unassigned> [disabled] [size=2K] |
||||
|
||||
0000:00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (prog-if 10 [OHCI]) |
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- |
||||
Interrupt: pin D routed to IRQ 2 |
||||
Region 0: Memory at 18004000 (32-bit, non-prefetchable) [disabled] [size=4K] |
||||
Expansion ROM at <unassigned> [disabled] [size=2K] |
||||
|
||||
0000:00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (prog-if 00 [Normal decode]) |
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+ |
||||
Region 0: Memory at 18005000 (32-bit, non-prefetchable) [disabled] [size=4K] |
||||
Region 1: Memory at 08000000 (32-bit, non-prefetchable) [disabled] [size=128M] |
||||
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 |
||||
I/O behind bridge: 00000000-00000fff |
||||
Memory behind bridge: 00000000-000fffff |
||||
Prefetchable memory behind bridge: 00000000-000fffff |
||||
Expansion ROM at <unassigned> [disabled] [size=2K] |
||||
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- |
||||
|
||||
0000:00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU |
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- |
||||
Interrupt: pin ? routed to IRQ 6 |
||||
Region 0: Memory at 18006000 (32-bit, non-prefetchable) [disabled] [size=4K] |
||||
Region 1: Memory at ff200000 (32-bit, non-prefetchable) [disabled] [size=2M] |
||||
Expansion ROM at <unassigned> [disabled] [size=2K] |
||||
|
||||
0000:00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core |
||||
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- |
||||
Interrupt: pin E routed to IRQ 2 |
||||
Region 0: Memory at 18007000 (32-bit, non-prefetchable) [disabled] [size=4K] |
||||
Region 1: Memory at 1f000000 (32-bit, non-prefetchable) [disabled] [size=16M] |
||||
Expansion ROM at <unassigned> [disabled] [size=2K] |
||||
|
||||
0000:00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller |
||||
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- |
||||
Latency: 64 |
||||
Interrupt: pin F routed to IRQ 4 |
||||
Region 0: Memory at 18008000 (32-bit, non-prefetchable) [disabled] [size=4K] |
||||
Expansion ROM at <unassigned> [disabled] [size=2K] |
||||
|
||||
0000:01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01) |
||||
Subsystem: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge |
||||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- |
||||
Latency: 64 |
||||
Interrupt: pin A routed to IRQ 6 |
||||
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=8K] |
||||
Region 1: Memory at <unassigned> (32-bit, prefetchable) [size=128M] |
||||
|
||||
0000:01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) |
||||
Subsystem: Tekram Technology Co.,Ltd.: Unknown device 1603 |
||||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
||||
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- |
||||
Latency: 64 |
||||
Interrupt: pin A routed to IRQ 6 |
||||
Region 0: Memory at 40002000 (32-bit, non-prefetchable) [size=8K] |
||||
|
||||
@ -0,0 +1,88 @@ |
||||
Intel_firmware_version=v1.41.8 |
||||
boardnum=42 |
||||
boardtype=bcm94710dev |
||||
boot_date=Fri Sep 26 00:34:47 2003 |
||||
boot_ver=v1.5 |
||||
boot_wait=on |
||||
clkfreq=125 |
||||
dl_ram_addr=a0001000 |
||||
et0macaddr=00:0C:41:B3:3C:55 |
||||
et0mdcport=0 |
||||
et0phyaddr=30 |
||||
et1macaddr=00:0C:41:B3:3C:56 |
||||
et1mdcport=1 |
||||
et1phyaddr=30 |
||||
firmware_version=v1.42.2 |
||||
flash_type=AMD 29lv320DT 2Mx16 TopB |
||||
lan_ipaddr=192.168.1.1 |
||||
lan_netmask=255.255.255.0 |
||||
os_flash_addr=bfc40000 |
||||
os_ram_addr=80001000 |
||||
pmon_ver=PMON 3.31.15.0 |
||||
scratch=a0180000 |
||||
sdram_config=0x0000 |
||||
sdram_init=0x0419 |
||||
sdram_ncdl=0x00000000 |
||||
sdram_refresh=0x8040 |
||||
watchdog=5000 |
||||
wl0_active_mac= |
||||
wl0_afterburner=auto |
||||
wl0_afterburner_override=-1 |
||||
wl0_antdiv=-1 |
||||
wl0_ap_ip= |
||||
wl0_ap_isolate=0 |
||||
wl0_ap_ssid= |
||||
wl0_auth=0 |
||||
wl0_auth_mode=disabled |
||||
wl0_bcn=100 |
||||
wl0_channel=6 |
||||
wl0_closed=0 |
||||
wl0_corerev=5 |
||||
wl0_country=Worldwide |
||||
wl0_country_code=AU |
||||
wl0_crypto=tkip |
||||
wl0_dtim=1 |
||||
wl0_frag=2346 |
||||
wl0_frameburst=on |
||||
wl0_gmode=1 |
||||
wl0_gmode_protection=auto |
||||
wl0_hwaddr=00:0C:41:B3:3C:57 |
||||
wl0_ifname=eth2 |
||||
wl0_infra=1 |
||||
wl0_key1= |
||||
wl0_key2= |
||||
wl0_key3= |
||||
wl0_key4= |
||||
wl0_key=1 |
||||
wl0_lazywds=1 |
||||
wl0_mac_deny= |
||||
wl0_mac_list= |
||||
wl0_maclist= |
||||
wl0_macmode1=disabled |
||||
wl0_macmode=disabled |
||||
wl0_mode=ap |
||||
wl0_mrate=0 |
||||
wl0_net_mode=mixed |
||||
wl0_passphrase= |
||||
wl0_phytype=g |
||||
wl0_phytypes=g |
||||
wl0_plcphdr=long |
||||
wl0_radio=1 |
||||
wl0_radioids=BCM2050 |
||||
wl0_radius_ipaddr= |
||||
wl0_radius_key= |
||||
wl0_radius_port=1812 |
||||
wl0_rate=0 |
||||
wl0_rateset=default |
||||
wl0_rts=2347 |
||||
wl0_ssid=linksys |
||||
wl0_unit=0 |
||||
wl0_wds= |
||||
wl0_wep=off |
||||
wl0_wep_bit=64 |
||||
wl0_wep_buf= |
||||
wl0_wep_gen= |
||||
wl0_wep_last= |
||||
wl0_wpa_gtk_rekey=3600 |
||||
wl0_wpa_psk= |
||||
wl_country_code=AU |
||||
@ -0,0 +1,56 @@ |
||||
PCI devices found: |
||||
Bus 0, device 0, function 0: |
||||
Class 0500: PCI device 14e4:0803 (rev 0). |
||||
IRQ 6. |
||||
Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. |
||||
Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. |
||||
Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. |
||||
Non-prefetchable 32 bit memory at 0x80000000 [0xffffffff]. |
||||
Bus 0, device 1, function 0: |
||||
Class 0200: PCI device 14e4:4711 (rev 0). |
||||
IRQ 5. |
||||
Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. |
||||
Bus 0, device 2, function 0: |
||||
Class 0200: PCI device 14e4:4713 (rev 0). |
||||
IRQ 3. |
||||
Master Capable. Latency=64. |
||||
Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. |
||||
Bus 0, device 3, function 0: |
||||
Class 0703: PCI device 14e4:4712 (rev 0). |
||||
IRQ 2. |
||||
Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. |
||||
Bus 0, device 4, function 0: |
||||
Class 0c03: PCI device 14e4:4715 (rev 0). |
||||
IRQ 2. |
||||
Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. |
||||
Bus 0, device 5, function 0: |
||||
Class 0604: PCI device 14e4:0804 (rev 0). |
||||
IRQ 6. |
||||
Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. |
||||
Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff]. |
||||
Bus 0, device 6, function 0: |
||||
Class 0b30: PCI device 14e4:0805 (rev 0). |
||||
IRQ 6. |
||||
Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. |
||||
Non-prefetchable 32 bit memory at 0xff200000 [0xff3fffff]. |
||||
Bus 0, device 7, function 0: |
||||
Class 0501: PCI device 14e4:0811 (rev 0). |
||||
IRQ 2. |
||||
Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff]. |
||||
Non-prefetchable 32 bit memory at 0x1f000000 [0x1fffffff]. |
||||
Bus 0, device 8, function 0: |
||||
Class 0200: PCI device 14e4:4713 (rev 0). |
||||
IRQ 4. |
||||
Master Capable. Latency=64. |
||||
Non-prefetchable 32 bit memory at 0x18008000 [0x18008fff]. |
||||
Bus 1, device 0, function 0: |
||||
Class 0600: PCI device 14e4:4710 (rev 1). |
||||
IRQ 6. |
||||
Master Capable. Latency=64. |
||||
Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff]. |
||||
Prefetchable 32 bit memory at 0x0 [0x7ffffff]. |
||||
Bus 1, device 8, function 0: |
||||
Class 0280: PCI device 14e4:4320 (rev 3). |
||||
IRQ 6. |
||||
Master Capable. Latency=64. |
||||
Non-prefetchable 32 bit memory at 0x40002000 [0x40003fff]. |
||||
Loading…
Reference in new issue