diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
deleted file mode 100644
index 3aa5de4d60..0000000000
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/bin/sh
-# based on gabors ralink wisoc implementation
-
-rt2x00_eeprom_die() {
-	echo "rt2x00 eeprom: " "$*"
-	exit 1
-}
-
-rt2x00_eeprom_extract() {
-	local part=$1
-	local offset=$2
-	local count=$3
-	local swab=$4
-	local mtd
-
-	. /lib/functions.sh
-
-	mtd=$(find_mtd_part $part)
-	[ -n "$mtd" ] || \
-		rt2x00_eeprom_die "no mtd device found for partition $part"
-
-	if [ $swab -gt 0 ]; then
-		dd if=$mtd of=/lib/firmware/$FIRMWARE bs=2 skip=$offset count=$count conv=swab || \
-			rt2x00_eeprom_die "failed to extract from $mtd"
-	else
-		dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
-			rt2x00_eeprom_die "failed to extract from $mtd"
-	fi
-}
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions/lantiq.sh
-
-case "$FIRMWARE" in
-"RT2860.eeprom" )
-	board=$(lantiq_board_name)
-	case $board in
-	ARV7506PW11|ARV7510PW22|ARV7519PW|ARV752DPW|ARV752DPW22|VGV7519)
-		rt2x00_eeprom_extract "board_config" 520 256 1
-		;;
-	ARV7525PW)
-		rt2x00_eeprom_extract "board_config" 1040 512 0
-		;;
-	*)
-		rt2x00_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-"RT3062.eeprom" )
-	board=$(lantiq_board_name)
-	case $board in
-	VGV7510KW22)
-		rt2x00_eeprom_extract "board_config" 520 256 1
-		;;
-	*)
-		rt2x00_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-esac
diff --git a/target/linux/lantiq/dts/ARV7506PW11.dts b/target/linux/lantiq/dts/ARV7506PW11.dts
index 676c0b898b..5c8b0fe3a3 100644
--- a/target/linux/lantiq/dts/ARV7506PW11.dts
+++ b/target/linux/lantiq/dts/ARV7506PW11.dts
@@ -80,17 +80,6 @@
 			phy-mode = "rmii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -152,3 +141,18 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7510PW22.dts b/target/linux/lantiq/dts/ARV7510PW22.dts
index f288511c7c..079c856308 100644
--- a/target/linux/lantiq/dts/ARV7510PW22.dts
+++ b/target/linux/lantiq/dts/ARV7510PW22.dts
@@ -121,24 +121,6 @@
 			phy-mode = "mii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			interrupt-map = <
-				0x7000 0 0 1 &icu0 30
-				0x7800 0 0 1 &icu0 135
-				0x7800 0 0 2 &icu0 135
-				0x7800 0 0 3 &icu0 135
-			>;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0x3>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -189,3 +171,23 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	interrupt-map = <
+		0x7000 0 0 1 &icu0 30
+		0x7800 0 0 1 &icu0 135
+		0x7800 0 0 2 &icu0 135
+		0x7800 0 0 3 &icu0 135
+	>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0x3>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7519PW.dts b/target/linux/lantiq/dts/ARV7519PW.dts
index 9c29c8c9c9..1fa52c3d90 100644
--- a/target/linux/lantiq/dts/ARV7519PW.dts
+++ b/target/linux/lantiq/dts/ARV7519PW.dts
@@ -113,18 +113,6 @@
 		ifxhcd@E101000 {
 			status = "okay";
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0xf>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -222,3 +210,17 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0xf>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7525PW.dts b/target/linux/lantiq/dts/ARV7525PW.dts
index aeba079a48..f259c17d26 100644
--- a/target/linux/lantiq/dts/ARV7525PW.dts
+++ b/target/linux/lantiq/dts/ARV7525PW.dts
@@ -68,12 +68,6 @@
 					};
 				};
 			};
-
-			ralink_eep {
-				compatible = "ralink,eeprom";
-				ralink,eeprom = "RT2860.eeprom";
-				reg = <0 0x3f0410 0x110>;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -96,11 +90,6 @@
 			phy-mode = "mii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
-		};
 	};
 
 	gpio-keys-polled {
@@ -150,3 +139,14 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV752DPW.dts b/target/linux/lantiq/dts/ARV752DPW.dts
index d6de881fae..d51a70a593 100644
--- a/target/linux/lantiq/dts/ARV752DPW.dts
+++ b/target/linux/lantiq/dts/ARV752DPW.dts
@@ -135,19 +135,6 @@
 			phy-mode = "rmii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			interrupt-map = <0x7000 0 0 1 &icu0 135>;
-			req-mask = <0x3>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -231,3 +218,18 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	interrupt-map = <0x7000 0 0 1 &icu0 135>;
+	req-mask = <0x3>;
+
+	wifi@1814,0601 {
+		compatible = "pci1814,0601";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV752DPW22.dts b/target/linux/lantiq/dts/ARV752DPW22.dts
index 0b0fddbd82..7343a5d2ff 100644
--- a/target/linux/lantiq/dts/ARV752DPW22.dts
+++ b/target/linux/lantiq/dts/ARV752DPW22.dts
@@ -134,24 +134,6 @@
 			phy-mode = "mii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			interrupt-map = <
-				0x7000 0 0 1 &icu0 30
-				0x7800 0 0 1 &icu0 135
-				0x7800 0 0 2 &icu0 135
-				0x7800 0 0 3 &icu0 135
-			>;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0x3>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -251,3 +233,23 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	interrupt-map = <
+		0x7000 0 0 1 &icu0 30
+		0x7800 0 0 1 &icu0 135
+		0x7800 0 0 2 &icu0 135
+		0x7800 0 0 3 &icu0 135
+	>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0x3>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/P2812HNUF1.dts b/target/linux/lantiq/dts/P2812HNUF1.dts
index 53ffbdd56c..b1d9eedb35 100644
--- a/target/linux/lantiq/dts/P2812HNUF1.dts
+++ b/target/linux/lantiq/dts/P2812HNUF1.dts
@@ -50,11 +50,6 @@
 		};
 	};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT3062.eeprom";
-	};
-
 	gpio-leds {
 		usb1: usb1 {
 			label = "p2812hnuf1:green:usb1";
@@ -66,3 +61,11 @@
 		};
 	};
 };
+
+&pci0 {
+	wifi@1814,3062 {
+		compatible = "pci1814,3062";
+		reg = <0x7000 0 0 0 0>;
+		ralink,eeprom = "RT3062.eeprom";
+	};
+};
diff --git a/target/linux/lantiq/dts/P2812HNUF3.dts b/target/linux/lantiq/dts/P2812HNUF3.dts
index 54795a334d..366d034670 100644
--- a/target/linux/lantiq/dts/P2812HNUF3.dts
+++ b/target/linux/lantiq/dts/P2812HNUF3.dts
@@ -54,9 +54,12 @@
 			};
 		};
 	};
+};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
+&pci0 {
+	wifi@1814,3092 {
+		compatible = "pci1814,3092";
+		reg = <0x7000 0 0 0 0>;
 		ralink,eeprom = "RT3092.eeprom";
 	};
 };
diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi
index 8af1db70c3..5ca2844d08 100644
--- a/target/linux/lantiq/dts/VGV7510KW22.dtsi
+++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi
@@ -75,11 +75,6 @@
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-
 		pcie@d900000 {
 			status = "disabled";
 		};
@@ -92,11 +87,6 @@
 		phys = [ 00 01 ];
 	};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT3062.eeprom";
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -167,6 +157,20 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
+
 &eth0 {
 	lan: interface@0 {
 		compatible = "lantiq,xrx200-pdi";
diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi
index a2242bb54d..a7b421fff9 100644
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -102,11 +102,6 @@
 			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 		};
 
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-
 		pcie@d900000 {
 			status = "disabled";
 		};
@@ -119,11 +114,6 @@
 		phys = [ 00 01 ];
 	};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -214,6 +204,20 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3091 {
+		compatible = "pci1814,3091";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
+
 &eth0 {
 	lan: interface@0 {
 		compatible = "lantiq,xrx200-pdi";