parent
2d989f9343
commit
7e0a17d829
@ -1,9 +1,53 @@ |
||||
include $(TOPDIR)/rules.mk |
||||
|
||||
include ./openwrt.mk |
||||
SHARED_INCLUDE:=${shell pwd}/include
|
||||
|
||||
source: openwrt-source |
||||
prepare: $(LINKSYS_SHARED_DIR)/.source |
||||
compile: $(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY) |
||||
install: compile openwrt |
||||
clean: openwrt-dirclean |
||||
libshared-compile libnvram-compile: |
||||
@$(MAKE) -C $(patsubst %-compile,%,$@) compile
|
||||
|
||||
libshared-install libnvram-install: |
||||
@$(MAKE) -C $(patsubst %-install,%,$@) install
|
||||
|
||||
libshared-clean libnvram-clean: |
||||
@$(MAKE) -C $(patsubst %-clean,%,$@) clean
|
||||
|
||||
$(TARGET_DIR)/sbin/mtd: mtd.c |
||||
$(TARGET_CC) -o $@ $<
|
||||
$(STRIP) $@
|
||||
|
||||
$(TARGET_DIR)/sbin/jffs2root: jffs2root.c |
||||
$(TARGET_CC) -o $@ $<
|
||||
$(STRIP) $@
|
||||
|
||||
# wlconf tool extracted from linksys firmware GPL.unpackedtree
|
||||
# WRT54GS_3_37_2_1109_US
|
||||
LINKSYS_TGZ_SITE=http://openwrt.openbsd-geek.de
|
||||
LINKSYS_WLCONF_TGZ=linksys-wlconf.tar.gz
|
||||
LINKSYS_WLCONF_DIR=$(BUILD_DIR)/linksys-wlconf
|
||||
LINKSYS_WLCONF_TARGET_BINARY:=usr/sbin/wlconf
|
||||
|
||||
$(DL_DIR)/$(LINKSYS_WLCONF_TGZ): |
||||
$(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_WLCONF_TGZ)
|
||||
|
||||
$(LINKSYS_WLCONF_DIR)/.unpacked: $(DL_DIR)/$(LINKSYS_WLCONF_TGZ) |
||||
zcat $(DL_DIR)/$(LINKSYS_WLCONF_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
touch $(LINKSYS_WLCONF_DIR)/.unpacked
|
||||
|
||||
$(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY): $(LINKSYS_WLCONF_DIR)/.unpacked |
||||
$(MAKE) -C $(LINKSYS_WLCONF_DIR) INSTALLDIR=$(TARGET_DIR) \
|
||||
CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
|
||||
CFLAGS="$(TARGET_CFLAGS) -I. -I$(SHARED_INCLUDE) \
|
||||
-Wall -DOPENWRT_WLCONF" \
|
||||
LDFLAGS="-lnvram -lshared" \
|
||||
install
|
||||
$(STRIP) $@
|
||||
|
||||
|
||||
source: |
||||
prepare: |
||||
compile: libnvram-compile libshared-compile |
||||
install: libnvram-install libshared-install $(TARGET_DIR)/sbin/mtd $(TARGET_DIR)/sbin/jffs2root $(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY) |
||||
clean: libnvram-clean libshared-clean |
||||
rm -rf $(LINKSYS_WLCONF_DIR)
|
||||
rm -f $(TARGET_DIR)/sbin/mtd
|
||||
rm -f $(TARGET_DIR)/sbin/jffs2root
|
||||
|
@ -0,0 +1,148 @@ |
||||
/*
|
||||
* NVRAM variable manipulation |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#ifndef _bcmnvram_h_ |
||||
#define _bcmnvram_h_ |
||||
|
||||
#ifndef _LANGUAGE_ASSEMBLY |
||||
|
||||
#include <typedefs.h> |
||||
|
||||
struct nvram_header { |
||||
uint32 magic; |
||||
uint32 len; |
||||
uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */ |
||||
uint32 config_refresh; /* 0:15 config, 16:31 refresh */ |
||||
uint32 config_ncdl; /* ncdl values for memc */ |
||||
}; |
||||
|
||||
struct nvram_tuple { |
||||
char *name; |
||||
char *value; |
||||
struct nvram_tuple *next; |
||||
}; |
||||
|
||||
/*
|
||||
* Initialize NVRAM access. May be unnecessary or undefined on certain |
||||
* platforms. |
||||
*/ |
||||
extern int nvram_init(void *sbh); |
||||
|
||||
/*
|
||||
* Disable NVRAM access. May be unnecessary or undefined on certain |
||||
* platforms. |
||||
*/ |
||||
extern void nvram_exit(void); |
||||
|
||||
/*
|
||||
* Get the value of an NVRAM variable. The pointer returned may be |
||||
* invalid after a set. |
||||
* @param name name of variable to get |
||||
* @return value of variable or NULL if undefined |
||||
*/ |
||||
extern char * nvram_get(const char *name); |
||||
|
||||
/*
|
||||
* Get the value of an NVRAM variable. |
||||
* @param name name of variable to get |
||||
* @return value of variable or NUL if undefined |
||||
*/ |
||||
#define nvram_safe_get(name) (nvram_get(name) ? : "") |
||||
|
||||
#define nvram_safe_unset(name) ({ \ |
||||
if(nvram_get(name)) \
|
||||
nvram_unset(name); \
|
||||
}) |
||||
|
||||
#define nvram_safe_set(name, value) ({ \ |
||||
if(!nvram_get(name) || strcmp(nvram_get(name), value)) \
|
||||
nvram_set(name, value); \
|
||||
}) |
||||
|
||||
/*
|
||||
* Match an NVRAM variable. |
||||
* @param name name of variable to match |
||||
* @param match value to compare against value of variable |
||||
* @return TRUE if variable is defined and its value is string equal |
||||
* to match or FALSE otherwise |
||||
*/ |
||||
static INLINE int |
||||
nvram_match(char *name, char *match) { |
||||
const char *value = nvram_get(name); |
||||
return (value && !strcmp(value, match)); |
||||
} |
||||
|
||||
/*
|
||||
* Inversely match an NVRAM variable. |
||||
* @param name name of variable to match |
||||
* @param match value to compare against value of variable |
||||
* @return TRUE if variable is defined and its value is not string |
||||
* equal to invmatch or FALSE otherwise |
||||
*/ |
||||
static INLINE int |
||||
nvram_invmatch(char *name, char *invmatch) { |
||||
const char *value = nvram_get(name); |
||||
return (value && strcmp(value, invmatch)); |
||||
} |
||||
|
||||
/*
|
||||
* Set the value of an NVRAM variable. The name and value strings are |
||||
* copied into private storage. Pointers to previously set values |
||||
* may become invalid. The new value may be immediately |
||||
* retrieved but will not be permanently stored until a commit. |
||||
* @param name name of variable to set |
||||
* @param value value of variable |
||||
* @return 0 on success and errno on failure |
||||
*/ |
||||
extern int nvram_set(const char *name, const char *value); |
||||
|
||||
/*
|
||||
* Unset an NVRAM variable. Pointers to previously set values |
||||
* remain valid until a set. |
||||
* @param name name of variable to unset |
||||
* @return 0 on success and errno on failure |
||||
* NOTE: use nvram_commit to commit this change to flash. |
||||
*/ |
||||
extern int nvram_unset(const char *name); |
||||
|
||||
/*
|
||||
* Commit NVRAM variables to permanent storage. All pointers to values |
||||
* may be invalid after a commit. |
||||
* NVRAM values are undefined after a commit. |
||||
* @return 0 on success and errno on failure |
||||
*/ |
||||
extern int nvram_commit(void); |
||||
|
||||
/*
|
||||
* Get all NVRAM variables (format name=value\0 ... \0\0). |
||||
* @param buf buffer to store variables |
||||
* @param count size of buffer in bytes |
||||
* @return 0 on success and errno on failure |
||||
*/ |
||||
extern int nvram_getall(char *buf, int count); |
||||
|
||||
extern int file2nvram(char *filename, char *varname); |
||||
extern int nvram2file(char *varname, char *filename); |
||||
|
||||
#endif /* _LANGUAGE_ASSEMBLY */ |
||||
|
||||
#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ |
||||
#define NVRAM_VERSION 1 |
||||
#define NVRAM_HEADER_SIZE 20 |
||||
#define NVRAM_SPACE 0x8000 |
||||
#define FLASH_BASE 0xbfc00000 /* Extif core */ |
||||
#define FLASH_MIN 0x00100000 /* Minimum flash size */ |
||||
#define FLASH_MAX 0x00400000 /* Maximum flash size with extif */ |
||||
|
||||
#endif /* _bcmnvram_h_ */ |
@ -0,0 +1,157 @@ |
||||
/*
|
||||
* Misc useful os-independent macros and functions. |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#ifndef _bcmutils_h_ |
||||
#define _bcmutils_h_ |
||||
|
||||
#ifndef MIN |
||||
#define MIN(a, b) (((a)<(b))?(a):(b)) |
||||
#endif |
||||
|
||||
#ifndef MAX |
||||
#define MAX(a, b) (((a)>(b))?(a):(b)) |
||||
#endif |
||||
|
||||
#define CEIL(x, y) (((x) + ((y)-1)) / (y)) |
||||
#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y)) |
||||
#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0) |
||||
#define ISPOWEROF2(x) ((((x)-1)&(x))==0) |
||||
#define OFFSETOF(type, member) ((uint) &((type *)0)->member) |
||||
#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) |
||||
|
||||
/* bit map related macros */ |
||||
#ifndef setbit |
||||
#define NBBY 8 /* 8 bits per byte */ |
||||
#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) |
||||
#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) |
||||
#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) |
||||
#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) |
||||
#endif |
||||
|
||||
#define NBITS(type) (sizeof (type) * 8) |
||||
|
||||
#define _BCM_U 0x01 /* upper */ |
||||
#define _BCM_L 0x02 /* lower */ |
||||
#define _BCM_D 0x04 /* digit */ |
||||
#define _BCM_C 0x08 /* cntrl */ |
||||
#define _BCM_P 0x10 /* punct */ |
||||
#define _BCM_S 0x20 /* white space (space/lf/tab) */ |
||||
#define _BCM_X 0x40 /* hex digit */ |
||||
#define _BCM_SP 0x80 /* hard space (0x20) */ |
||||
|
||||
extern unsigned char bcm_ctype[]; |
||||
#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) |
||||
|
||||
#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) |
||||
#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) |
||||
#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) |
||||
#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) |
||||
#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) |
||||
#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) |
||||
#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) |
||||
#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) |
||||
#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) |
||||
#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) |
||||
#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) |
||||
|
||||
/*
|
||||
* Spin at most 'us' microseconds while 'exp' is true. |
||||
* Caller should explicitly test 'exp' when this completes |
||||
* and take appropriate error action if 'exp' is still true. |
||||
*/ |
||||
#define SPINWAIT(exp, us) { \ |
||||
uint countdown = (us) + 9; \
|
||||
while ((exp) && (countdown >= 10)) {\
|
||||
OSL_DELAY(10); \
|
||||
countdown -= 10; \
|
||||
} \
|
||||
} |
||||
|
||||
/* generic osl packet queue */ |
||||
struct pktq { |
||||
void *head; /* first packet to dequeue */ |
||||
void *tail; /* last packet to dequeue */ |
||||
uint len; /* number of queued packets */ |
||||
uint maxlen; /* maximum number of queued packets */ |
||||
bool priority; /* enqueue by packet priority */ |
||||
}; |
||||
#define DEFAULT_QLEN 128 |
||||
|
||||
#define pktq_len(q) ((q)->len) |
||||
#define pktq_avail(q) ((q)->maxlen - (q)->len) |
||||
#define pktq_head(q) ((q)->head) |
||||
#define pktq_full(q) ((q)->len >= (q)->maxlen) |
||||
|
||||
/* crc defines */ |
||||
#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ |
||||
#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ |
||||
#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ |
||||
#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ |
||||
#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ |
||||
#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ |
||||
|
||||
/* tag_ID/length/value_buffer tuple */ |
||||
typedef struct bcm_tlv { |
||||
uint8 id; |
||||
uint8 len; |
||||
uint8 data[1]; |
||||
} bcm_tlv_t; |
||||
|
||||
/* Check that bcm_tlv_t fits into the given buflen */ |
||||
#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (buflen) >= 2 + (elt)->len) |
||||
|
||||
/* buffer length for ethernet address from bcm_ether_ntoa() */ |
||||
#define ETHER_ADDR_STR_LEN 18 |
||||
|
||||
/*
|
||||
* load 32-bit value from unaligned byte array |
||||
*/ |
||||
#ifdef IL_BIGENDIAN |
||||
#define load32_ua(a) ((((uint8 *)(a))[0] << 24) + (((uint8 *)(a))[1] << 16) + \ |
||||
(((uint8 *)(a))[2] << 8) + ((uint8 *)(a))[3]) |
||||
#else |
||||
#define load32_ua(a) ((((uint8 *)(a))[3] << 24) + (((uint8 *)(a))[2] << 16) + \ |
||||
(((uint8 *)(a))[1] << 8) + ((uint8 *)(a))[0]) |
||||
#endif |
||||
|
||||
/* externs */ |
||||
extern uint bcm_atoi(char *s); |
||||
extern uchar bcm_toupper(uchar c); |
||||
extern ulong bcm_strtoul(char *cp, char **endp, uint base); |
||||
extern void deadbeef(char *p, uint len); |
||||
extern void prhex(char *msg, uchar *buf, uint len); |
||||
extern void prpkt(char *msg, void *drv, void *p0); |
||||
extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf); |
||||
extern uint pkttotlen(void *drv, void *); |
||||
extern uchar *bcm_ether_ntoa(char *ea, char *buf); |
||||
extern int bcm_ether_atoe(char *p, char *ea); |
||||
extern void bcm_mdelay(uint ms); |
||||
extern char *getvar(char *vars, char *name); |
||||
extern int getintvar(char *vars, char *name); |
||||
extern char *bcmstrstr(char *haystack, char *needle); |
||||
|
||||
extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc); |
||||
extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc); |
||||
extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc); |
||||
extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); |
||||
extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); |
||||
extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); |
||||
extern void pktq_init(struct pktq *q, uint maxlen, bool priority); |
||||
extern bool pktenq(struct pktq *q, void *p, bool lifo); |
||||
extern void *pktdeq(struct pktq *q); |
||||
|
||||
#define bcmlog(fmt, a1, a2) |
||||
#define bcmdumplog(buf, size) *buf = '\0' |
||||
#define bcmdumplogent(buf, idx) -1 |
||||
|
||||
#endif /* _bcmutils_h_ */ |
@ -0,0 +1,69 @@ |
||||
|
||||
#define DNSMASQ_SUPPORT 1 |
||||
#define CONFIG_DNSMASQ y |
||||
#define UDHCPD_SUPPORT 1 |
||||
#define CONFIG_UDHCPD y |
||||
#define UDHCPC_SUPPORT 1 |
||||
#define CONFIG_UDHCPC y |
||||
#define PPPOE_SUPPORT 1 |
||||
#define CONFIG_PPPOE y |
||||
#define PPTP_SUPPORT 1 |
||||
#define CONFIG_PPTP y |
||||
#define L2TP_SUPPORT 1 |
||||
#define CONFIG_L2TP y |
||||
#define PPPD_SUPPORT 1 |
||||
#define CONFIG_PPPD y |
||||
#define ZEBRA_SUPPORT 1 |
||||
#define CONFIG_ZEBRA y |
||||
#define TFTPD_SUPPORT 1 |
||||
#define CONFIG_TFTPD y |
||||
#define DDNS_SUPPORT 1 |
||||
#define CONFIG_DDNS y |
||||
#define CRON_SUPPORT 1 |
||||
#define CONFIG_CRON y |
||||
#define HTTPD_SUPPORT 1 |
||||
#define CONFIG_HTTPD y |
||||
#define GET_POST_SUPPORT 1 |
||||
#define CONFIG_GET_POST y |
||||
|
||||
#if 1 |
||||
#define HEARTBEAT_SUPPORT 1 |
||||
#define CONFIG_HEARTBEAT y |
||||
#define MULTICAST_SUPPORT 1 |
||||
#define CONFIG_MULTICAST y |
||||
#define SETUP_WIZARD_SUPPORT 1 |
||||
#define CONFIG_SETUP_WIZARD y |
||||
#define PARENTAL_CONTROL_SUPPORT 1 |
||||
#define CONFIG_PARENTAL_CONTROL y |
||||
#define HTTPS_SUPPORT 1 |
||||
#define CONFIG_HTTPS y |
||||
#define EOU_SUPPORT 1 |
||||
#define CONFIG_EOU y |
||||
#define EZC_SUPPORT 1 |
||||
#define CONFIG_EZC y |
||||
#define WRITE_MAC_SUPPORT 1 |
||||
#define CONFIG_WRITE_MAC y |
||||
#define DIAG_SUPPORT 1 |
||||
#define CONFIG_DIAG y |
||||
#endif |
||||
|
||||
#define SPEED_BOOSTER_SUPPORT 1 |
||||
#define CONFIG_SPEED_BOOSTER y |
||||
#define XBOX_SUPPORT 1 |
||||
#define CONFIG_XBOX y |
||||
|
||||
#if 0 |
||||
#define MPPPOE_SUPPORT 1 |
||||
#define CONFIG_MPPPOE y |
||||
#define UNNUMBERIP_SUPPORT 1 |
||||
#define CONFIG_UNNUMBERIP y |
||||
#endif |
||||
|
||||
#define WL_STA_SUPPORT 1 |
||||
#define CONFIG_WL_STA y |
||||
#define BACKUP_RESTORE_SUPPORT 1 |
||||
#define CONFIG_BACKUP_RESTORE y |
||||
#define PORT_TRIGGER_SUPPORT 1 |
||||
#define CONFIG_PORT_TRIGGER y |
||||
#define HW_QOS_SUPPORT 1 |
||||
#define CONFIG_HW_QOS y |
@ -0,0 +1,69 @@ |
||||
/*
|
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
* |
||||
*/ |
||||
|
||||
#ifndef _epivers_h_ |
||||
#define _epivers_h_ |
||||
|
||||
#ifdef linux |
||||
#include <linux/config.h> |
||||
#endif |
||||
|
||||
/* Vendor Name, ASCII, 32 chars max */ |
||||
#ifdef COMPANYNAME |
||||
#define HPNA_VENDOR COMPANYNAME |
||||
#else |
||||
#define HPNA_VENDOR "Broadcom Corporation" |
||||
#endif |
||||
|
||||
/* Driver Date, ASCII, 32 chars max */ |
||||
#define HPNA_DRV_BUILD_DATE __DATE__ |
||||
|
||||
/* Hardware Manufacture Date, ASCII, 32 chars max */ |
||||
#define HPNA_HW_MFG_DATE "Not Specified" |
||||
|
||||
/* See documentation for Device Type values, 32 values max */ |
||||
#ifndef HPNA_DEV_TYPE |
||||
|
||||
#if defined(CONFIG_BRCM_VJ) |
||||
#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } |
||||
|
||||
#elif defined(CONFIG_BCRM_93725) |
||||
#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } |
||||
|
||||
#else |
||||
#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } |
||||
|
||||
#endif |
||||
|
||||
#endif /* !HPNA_DEV_TYPE */ |
||||
|
||||
|
||||
#define EPI_MAJOR_VERSION 3 |
||||
|
||||
#define EPI_MINOR_VERSION 60 |
||||
|
||||
#define EPI_RC_NUMBER 13 |
||||
|
||||
#define EPI_INCREMENTAL_NUMBER 0 |
||||
|
||||
#define EPI_BUILD_NUMBER 0 |
||||
|
||||
#define EPI_VERSION 3,60,13,0 |
||||
|
||||
#define EPI_VERSION_NUM 0x033c0d00 |
||||
|
||||
/* Driver Version String, ASCII, 32 chars max */ |
||||
#define EPI_VERSION_STR "3.60.13.0" |
||||
#define EPI_ROUTER_VERSION_STR "3.61.13.0" |
||||
|
||||
#endif /* _epivers_h_ */ |
@ -0,0 +1,852 @@ |
||||
/*
|
||||
* Copyright 2004, Broadcom Corporation
|
||||
* All Rights Reserved.
|
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
|
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
|
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
|
||||
* |
||||
* Fundamental types and constants relating to 802.11
|
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#ifndef _802_11_H_ |
||||
#define _802_11_H_ |
||||
|
||||
#ifndef _TYPEDEFS_H_ |
||||
#include <typedefs.h> |
||||
#endif |
||||
|
||||
#ifndef _NET_ETHERNET_H_ |
||||
#include <proto/ethernet.h> |
||||
#endif |
||||
|
||||
/* enable structure packing */ |
||||
#if !defined(__GNUC__) |
||||
#pragma pack(1) |
||||
#endif |
||||
|
||||
/* some platforms require stronger medicine */ |
||||
#if defined(__GNUC__) |
||||
#define PACKED __attribute__((packed)) |
||||
#else |
||||
#define PACKED |
||||
#endif |
||||
|
||||
|
||||
#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */ |
||||
|
||||
/* Generic 802.11 frame constants */ |
||||
#define DOT11_A3_HDR_LEN 24 |
||||
#define DOT11_A4_HDR_LEN 30 |
||||
#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN |
||||
#define DOT11_FCS_LEN 4 |
||||
#define DOT11_ICV_LEN 4 |
||||
#define DOT11_ICV_AES_LEN 8 |
||||
#define DOT11_QOS_LEN 2 |
||||
|
||||
#define DOT11_KEY_INDEX_SHIFT 6 |
||||
#define DOT11_IV_LEN 4 |
||||
#define DOT11_IV_TKIP_LEN 8 |
||||
#define DOT11_IV_AES_OCB_LEN 4 |
||||
#define DOT11_IV_AES_CCM_LEN 8 |
||||
|
||||
/* Includes MIC */ |
||||
#define DOT11_MAX_MPDU_BODY_LEN 2304 |
||||
/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */ |
||||
#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \ |
||||
DOT11_QOS_LEN + \
|
||||
DOT11_IV_AES_CCM_LEN + \
|
||||
DOT11_MAX_MPDU_BODY_LEN + \
|
||||
DOT11_ICV_LEN + \
|
||||
DOT11_FCS_LEN) |
||||
|
||||
#define DOT11_MAX_SSID_LEN 32 |
||||
|
||||
/* dot11RTSThreshold */ |
||||
#define DOT11_DEFAULT_RTS_LEN 2347 |
||||
#define DOT11_MAX_RTS_LEN 2347 |
||||
|
||||
/* dot11FragmentationThreshold */ |
||||
#define DOT11_MIN_FRAG_LEN 256 |
||||
#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */ |
||||
#define DOT11_DEFAULT_FRAG_LEN 2346 |
||||
|
||||
/* dot11BeaconPeriod */ |
||||
#define DOT11_MIN_BEACON_PERIOD 1 |
||||
#define DOT11_MAX_BEACON_PERIOD 0xFFFF |
||||
|
||||
/* dot11DTIMPeriod */ |
||||
#define DOT11_MIN_DTIM_PERIOD 1 |
||||
#define DOT11_MAX_DTIM_PERIOD 0xFF |
||||
|
||||
/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */ |
||||
#define DOT11_LLC_SNAP_HDR_LEN 8 |
||||
#define DOT11_OUI_LEN 3 |
||||
struct dot11_llc_snap_header { |
||||
uint8 dsap; /* always 0xAA */ |
||||
uint8 ssap; /* always 0xAA */ |
||||
uint8 ctl; /* always 0x03 */ |
||||
uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00
|
||||
Bridge-Tunnel: 0x00 0x00 0xF8 */ |
||||
uint16 type; /* ethertype */ |
||||
} PACKED; |
||||
|
||||
/* RFC1042 header used by 802.11 per 802.1H */ |
||||
#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) |
||||
|
||||
/* Generic 802.11 MAC header */ |
||||
/*
|
||||
* N.B.: This struct reflects the full 4 address 802.11 MAC header. |
||||
* The fields are defined such that the shorter 1, 2, and 3 |
||||
* address headers just use the first k fields. |
||||
*/ |
||||
struct dot11_header { |
||||
uint16 fc; /* frame control */ |
||||
uint16 durid; /* duration/ID */ |
||||
struct ether_addr a1; /* address 1 */ |
||||
struct ether_addr a2; /* address 2 */ |
||||
struct ether_addr a3; /* address 3 */ |
||||
uint16 seq; /* sequence control */ |
||||
struct ether_addr a4; /* address 4 */ |
||||
} PACKED; |
||||
|
||||
/* Control frames */ |
||||
|
||||
struct dot11_rts_frame { |
||||
uint16 fc; /* frame control */ |
||||
uint16 durid; /* duration/ID */ |
||||
struct ether_addr ra; /* receiver address */ |
||||
struct ether_addr ta; /* transmitter address */ |
||||
} PACKED; |
||||
#define DOT11_RTS_LEN 16 |
||||
|
||||
struct dot11_cts_frame { |
||||
uint16 fc; /* frame control */ |
||||
uint16 durid; /* duration/ID */ |
||||
struct ether_addr ra; /* receiver address */ |
||||
} PACKED; |
||||
#define DOT11_CTS_LEN 10 |
||||
|
||||
struct dot11_ack_frame { |
||||
uint16 fc; /* frame control */ |
||||
uint16 durid; /* duration/ID */ |
||||
struct ether_addr ra; /* receiver address */ |
||||
} PACKED; |
||||
#define DOT11_ACK_LEN 10 |
||||
|
||||
struct dot11_ps_poll_frame { |
||||
uint16 fc; /* frame control */ |
||||
uint16 durid; /* AID */ |
||||
struct ether_addr bssid; /* receiver address, STA in AP */ |
||||
struct ether_addr ta; /* transmitter address */ |
||||
} PACKED; |
||||
#define DOT11_PS_POLL_LEN 16 |
||||
|
||||
struct dot11_cf_end_frame { |
||||
uint16 fc; /* frame control */ |
||||
uint16 durid; /* duration/ID */ |
||||
struct ether_addr ra; /* receiver address */ |
||||
struct ether_addr bssid; /* transmitter address, STA in AP */ |
||||
} PACKED; |
||||
#define DOT11_CS_END_LEN 16 |
||||
|
||||
/* Management frame header */ |
||||
struct dot11_management_header { |
||||
uint16 fc; /* frame control */ |
||||
uint16 durid; /* duration/ID */ |
||||
struct ether_addr da; /* receiver address */ |
||||
struct ether_addr sa; /* transmitter address */ |
||||
struct ether_addr bssid; /* BSS ID */ |
||||
uint16 seq; /* sequence control */ |
||||
} PACKED; |
||||
#define DOT11_MGMT_HDR_LEN 24 |
||||
|
||||
/* Management frame payloads */ |
||||
|
||||
struct dot11_bcn_prb { |
||||
uint32 timestamp[2]; |
||||
uint16 beacon_interval; |
||||
uint16 capability; |
||||
} PACKED; |
||||
#define DOT11_BCN_PRB_LEN 12 |
||||
|
||||
struct dot11_auth { |
||||
uint16 alg; /* algorithm */ |
||||
uint16 seq; /* sequence control */ |
||||
uint16 status; /* status code */ |
||||
} PACKED; |
||||
#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */ |
||||
|
||||
struct dot11_assoc_req { |
||||
uint16 capability; /* capability information */ |
||||
uint16 listen; /* listen interval */ |
||||
} PACKED; |
||||
|
||||
struct dot11_assoc_resp { |
||||
uint16 capability; /* capability information */ |
||||
uint16 status; /* status code */ |
||||
uint16 aid; /* association ID */ |
||||
} PACKED; |
||||
|
||||
struct dot11_action_measure { |
||||
uint8 category; |
||||
uint8 action; |
||||
uint8 token; |
||||
uint8 data[1]; |
||||
} PACKED; |
||||
#define DOT11_ACTION_MEASURE_LEN 3 |
||||
|
||||
/**************
|
||||
802.11h related definitions. |
||||
**************/ |
||||
typedef struct { |
||||
uint8 id; |
||||
uint8 len; |
||||
uint8 power; |
||||
} dot11_power_cnst_t; |
||||
|
||||
typedef struct { |
||||
uint8 min; |
||||
uint8 max; |
||||
} dot11_power_cap_t; |
||||
|
||||
typedef struct { |
||||
uint8 id; |
||||
uint8 len; |
||||
uint8 tx_pwr; |
||||
uint8 margin; |
||||
} dot11_tpc_rep_t; |
||||
#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */ |
||||
|
||||
typedef struct { |
||||
uint8 id; |
||||
uint8 len; |
||||
uint8 first_channel; |
||||
uint8 num_channels; |
||||
} dot11_supp_channels_t; |
||||
|
||||
struct dot11_channel_switch { |
||||
uint8 id; |
||||
uint8 len; |
||||
uint8 mode; |
||||
uint8 channel; |
||||
uint8 count; |
||||
} PACKED; |
||||
typedef struct dot11_channel_switch dot11_channel_switch_t; |
||||
|
||||
/* 802.11h Measurement Request/Report IEs */ |
||||
/* Measurement Type field */ |
||||
#define DOT11_MEASURE_TYPE_BASIC 0 |
||||
#define DOT11_MEASURE_TYPE_CCA 1 |
||||
#define DOT11_MEASURE_TYPE_RPI 2 |
||||
|
||||
/* Measurement Mode field */ |
||||
|
||||
/* Measurement Request Modes */ |
||||
#define DOT11_MEASURE_MODE_ENABLE (1<<1) |
||||
#define DOT11_MEASURE_MODE_REQUEST (1<<2) |
||||
#define DOT11_MEASURE_MODE_REPORT (1<<3) |
||||
/* Measurement Report Modes */ |
||||
#define DOT11_MEASURE_MODE_LATE (1<<0) |
||||
#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) |
||||
#define DOT11_MEASURE_MODE_REFUSED (1<<2) |
||||
/* Basic Measurement Map bits */ |
||||
#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) |
||||
#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) |
||||
#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) |
||||
#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) |
||||
#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) |
||||
|
||||
typedef struct { |
||||
uint8 id; |
||||
uint8 len; |
||||
uint8 token; |
||||
uint8 mode; |
||||
uint8 type; |
||||
uint8 channel; |
||||
uint8 start_time[8]; |
||||
uint16 duration; |
||||
} dot11_meas_req_t; |
||||
#define DOT11_MNG_IE_MREQ_LEN 14 |
||||
/* length of Measure Request IE data not including variable len */ |
||||
#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 |
||||
|
||||
struct dot11_meas_rep { |
||||
uint8 id; |
||||
uint8 len; |
||||
uint8 token; |
||||
uint8 mode; |
||||
uint8 type; |
||||
union
|
||||
{ |
||||
struct { |
||||
uint8 channel; |
||||
uint8 start_time[8]; |
||||
uint16 duration; |
||||
uint8 map; |
||||
} PACKED basic; |
||||
uint8 data[1]; |
||||
} PACKED rep; |
||||
} PACKED; |
||||
typedef struct dot11_meas_rep dot11_meas_rep_t; |
||||
|
||||
/* length of Measure Report IE data not including variable len */ |
||||
#define DOT11_MNG_IE_MREP_FIXED_LEN 3 |
||||
|
||||
struct dot11_meas_rep_basic { |
||||
uint8 channel; |
||||
uint8 start_time[8]; |
||||
uint16 duration; |
||||
uint8 map; |
||||
} PACKED; |
||||
typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t; |
||||
#define DOT11_MEASURE_BASIC_REP_LEN 12 |
||||
|
||||
struct dot11_quiet { |
||||
uint8 id; |
||||
uint8 len; |
||||
uint8 count; /* TBTTs until beacon interval in quiet starts */ |
||||
uint8 period; /* Beacon intervals between periodic quiet periods ? */ |
||||
uint16 duration;/* Length of quiet period, in TU's */ |
||||
uint16 offset; /* TU's offset from TBTT in Count field */ |
||||
} PACKED; |
||||
typedef struct dot11_quiet dot11_quiet_t; |
||||
|
||||
typedef struct { |
||||
uint8 channel; |
||||
uint8 map; |
||||
} chan_map_tuple_t; |
||||
|
||||
typedef struct { |
||||
uint8 id; |
||||
uint8 len; |
||||
uint8 eaddr[ETHER_ADDR_LEN]; |
||||
uint8 interval; |
||||
chan_map_tuple_t map[1]; |
||||
} dot11_ibss_dfs_t; |
||||
|
||||
/* WME Elements */ |
||||
#define WME_OUI "\x00\x50\xf2" |
||||
#define WME_VER 1 |
||||
#define WME_TYPE 2 |
||||
#define WME_SUBTYPE_IE 0 /* Information Element */ |
||||
#define WME_SUBTYPE_PARAM_IE 1 /* Parameter Element */ |
||||
#define WME_SUBTYPE_TSPEC 2 /* Traffic Specification */ |
||||
|
||||
/* WME Access Category Indices (ACIs) */ |
||||
#define AC_BE 0 /* Best Effort */ |
||||
#define AC_BK 1 /* Background */ |
||||
#define AC_VI 2 /* Video */ |
||||
#define AC_VO 3 /* Voice */ |
||||
#define AC_MAX 4 |
||||
|
||||
/* WME Information Element (IE) */ |
||||
struct wme_ie { |
||||
uint8 oui[3]; |
||||
uint8 type; |
||||
uint8 subtype; |
||||
uint8 version; |
||||
uint8 acinfo; |
||||
} PACKED; |
||||
typedef struct wme_ie wme_ie_t; |
||||
#define WME_IE_LEN 7 |
||||
|
||||
struct wme_acparam { |
||||
uint8 ACI; |
||||
uint8 ECW; |
||||
uint16 TXOP; /* stored in network order (ls octet first) */ |
||||
} PACKED; |
||||
typedef struct wme_acparam wme_acparam_t; |
||||
|
||||
/* WME Parameter Element (PE) */ |
||||
struct wme_params { |
||||
uint8 oui[3]; |
||||
uint8 type; |
||||
uint8 subtype; |
||||
uint8 version; |
||||
uint8 acinfo; |
||||
uint8 rsvd; |
||||
wme_acparam_t acparam[4]; |
||||
} PACKED; |
||||
typedef struct wme_params wme_params_t; |
||||
#define WME_PARAMS_IE_LEN 24 |
||||
|
||||
/* acinfo */ |
||||
#define WME_COUNT_MASK 0x0f |
||||
/* ACI */ |
||||
#define WME_AIFS_MASK 0x0f |
||||
#define WME_ACM_MASK 0x10 |
||||
#define WME_ACI_MASK 0x60 |
||||
#define WME_ACI_SHIFT 5 |
||||
/* ECW */ |
||||
#define WME_CWMIN_MASK 0x0f |
||||
#define WME_CWMAX_MASK 0xf0 |
||||
#define WME_CWMAX_SHIFT 4 |
||||
|
||||
#define WME_TXOP_UNITS 32 |
||||
|
||||
/* WME Traffic Specification (TSPEC) element */ |
||||
#define WME_SUBTYPE_TSPEC 2 |
||||
#define WME_TSPEC_HDR_LEN 2 |
||||
#define WME_TSPEC_BODY_OFF 2 |
||||
struct wme_tspec { |
||||
uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */ |
||||
uint8 type; /* WME_TYPE */ |
||||
uint8 subtype; /* WME_SUBTYPE_TSPEC */ |
||||
uint8 version; /* WME_VERSION */ |
||||
uint16 ts_info; /* TS Info */ |
||||
uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */ |
||||
uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */ |
||||
uint32 min_service_interval; /* Minimum Service Interval (us) */ |
||||
uint32 max_service_interval; /* Maximum Service Interval (us) */ |
||||
uint32 inactivity_interval; /* Inactivity Interval (us) */ |
||||
uint32 service_start; /* Service Start Time (us) */ |
||||
uint32 min_rate; /* Minimum Data Rate (bps) */ |
||||
uint32 mean_rate; /* Mean Data Rate (bps) */ |
||||
uint32 max_burst_size; /* Maximum Burst Size (bytes) */ |
||||
uint32 min_phy_rate; /* Minimum PHY Rate (bps) */ |
||||
uint32 peak_rate; /* Peak Data Rate (bps) */ |
||||
uint32 delay_bound; /* Delay Bound (us) */ |
||||
uint16 surplus_bandwidth; /* Surplus Bandwidth Allowance Factor */ |
||||
uint16 medium_time; /* Medium Time (32 us/s periods) */ |
||||
} PACKED; |
||||
typedef struct wme_tspec wme_tspec_t; |
||||
#define WME_TSPEC_LEN 56 /* not including 2-byte header */ |
||||
|
||||
/* ts_info */ |
||||
/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */ |
||||
#define TS_INFO_PRIO_SHIFT_HI 11 |
||||
#define TS_INFO_PRIO_MASK_HI (0x7 << TS_INFO_PRIO_SHIFT_HI) |
||||
#define TS_INFO_PRIO_SHIFT_LO 1 |
||||
#define TS_INFO_PRIO_MASK_LO (0x7 << TS_INFO_PRIO_SHIFT_LO) |
||||
#define TS_INFO_CONTENTION_SHIFT 7 |
||||
#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT) |
||||
#define TS_INFO_DIRECTION_SHIFT 5 |
||||
#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT) |
||||
#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT) |
||||
#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT) |
||||
#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT) |
||||
|
||||
/* nom_msdu_size */ |
||||
#define FIXED_MSDU_SIZE 0x8000 /* MSDU size is fixed */ |
||||
#define MSDU_SIZE_MASK 0x7fff /* (Nominal or fixed) MSDU size */ |
||||
|
||||
/* surplus_bandwidth */ |
||||
/* Represented as 3 bits of integer, binary point, 13 bits fraction */ |
||||
#define INTEGER_SHIFT 13 |
||||
#define FRACTION_MASK 0x1FFF |
||||
|
||||
/* Management Notification Frame */ |
||||
struct dot11_management_notification { |
||||
uint8 category; /* DOT11_ACTION_NOTIFICATION */ |
||||
uint8 action; |
||||
uint8 token; |
||||
uint8 status; |
||||
uint8 data[1]; /* Elements */ |
||||
} PACKED; |
||||
#define DOT11_MGMT_NOTIFICATION_LEN 4 /* Fixed length */ |
||||
|
||||
/* WME Action Codes */ |
||||
#define WME_SETUP_REQUEST 0 |
||||
#define WME_SETUP_RESPONSE 1 |
||||
#define WME_TEARDOWN 2 |
||||
|
||||
/* WME Setup Response Status Codes */ |
||||
#define WME_ADMISSION_ACCEPTED 0 |
||||
#define WME_INVALID_PARAMETERS 1 |
||||
#define WME_ADMISSION_REFUSED 3 |
||||
|
||||
/* Macro to take a pointer to a beacon or probe response
|
||||
* header and return the char* pointer to the SSID info element |
||||
*/ |
||||
#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN) |
||||
|
||||
/* Authentication frame payload constants */ |
||||
#define DOT11_OPEN_SYSTEM 0 |
||||
#define DOT11_SHARED_KEY 1 |
||||
#define DOT11_CHALLENGE_LEN 128 |
||||
|
||||
/* Frame control macros */ |
||||
#define FC_PVER_MASK 0x3 |
||||
#define FC_PVER_SHIFT 0 |
||||
#define FC_TYPE_MASK 0xC |
||||
#define FC_TYPE_SHIFT 2 |
||||
#define FC_SUBTYPE_MASK 0xF0 |
||||
#define FC_SUBTYPE_SHIFT 4 |
||||
#define FC_TODS 0x100 |
||||
#define FC_TODS_SHIFT 8 |
||||
#define FC_FROMDS 0x200 |
||||
#define FC_FROMDS_SHIFT 9 |
||||
#define FC_MOREFRAG 0x400 |
||||
#define FC_MOREFRAG_SHIFT 10 |
||||
#define FC_RETRY 0x800 |
||||
#define FC_RETRY_SHIFT 11 |
||||
#define FC_PM 0x1000 |
||||
#define FC_PM_SHIFT 12 |
||||
#define FC_MOREDATA 0x2000 |
||||
#define FC_MOREDATA_SHIFT 13 |
||||
#define FC_WEP 0x4000 |
||||
#define FC_WEP_SHIFT 14 |
||||
#define FC_ORDER 0x8000 |
||||
#define FC_ORDER_SHIFT 15 |
||||
|
||||
/* sequence control macros */ |
||||
#define SEQNUM_SHIFT 4 |
||||
#define FRAGNUM_MASK 0xF |
||||
|
||||
/* Frame Control type/subtype defs */ |
||||
|
||||
/* FC Types */ |
||||
#define FC_TYPE_MNG 0 |
||||
#define FC_TYPE_CTL 1 |
||||
#define FC_TYPE_DATA 2 |
||||
|
||||
/* Management Subtypes */ |
||||
#define FC_SUBTYPE_ASSOC_REQ 0 |
||||
#define FC_SUBTYPE_ASSOC_RESP 1 |
||||
#define FC_SUBTYPE_REASSOC_REQ 2 |
||||
#define FC_SUBTYPE_REASSOC_RESP 3 |
||||
#define FC_SUBTYPE_PROBE_REQ 4 |
||||
#define FC_SUBTYPE_PROBE_RESP 5 |
||||
#define FC_SUBTYPE_BEACON 8 |
||||
#define FC_SUBTYPE_ATIM 9 |
||||
#define FC_SUBTYPE_DISASSOC 10 |
||||
#define FC_SUBTYPE_AUTH 11 |
||||
#define FC_SUBTYPE_DEAUTH 12 |
||||
#define FC_SUBTYPE_ACTION 13 |
||||
|
||||
/* Control Subtypes */ |
||||
#define FC_SUBTYPE_PS_POLL 10 |
||||
#define FC_SUBTYPE_RTS 11 |
||||
#define FC_SUBTYPE_CTS 12 |
||||
#define FC_SUBTYPE_ACK 13 |
||||
#define FC_SUBTYPE_CF_END 14 |
||||
#define FC_SUBTYPE_CF_END_ACK 15 |
||||
|
||||
/* Data Subtypes */ |
||||
#define FC_SUBTYPE_DATA 0 |
||||
#define FC_SUBTYPE_DATA_CF_ACK 1 |
||||
#define FC_SUBTYPE_DATA_CF_POLL 2 |
||||
#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 |
||||
#define FC_SUBTYPE_NULL 4 |
||||
#define FC_SUBTYPE_CF_ACK 5 |
||||
#define FC_SUBTYPE_CF_POLL 6 |
||||
#define FC_SUBTYPE_CF_ACK_POLL 7 |
||||
#define FC_SUBTYPE_QOS_DATA 8 |
||||
#define FC_SUBTYPE_QOS_NULL 12 |
||||
|
||||
/* type-subtype combos */ |
||||
#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) |
||||
|
||||
#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) |
||||
|
||||
#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) |
||||
#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) |
||||
#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) |
||||
#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) |
||||
#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) |
||||
#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) |
||||
#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) |
||||
#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) |
||||
#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) |
||||
#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) |
||||
#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) |
||||
|
||||
#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) |
||||
#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) |
||||
#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) |
||||
#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) |
||||
#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) |
||||
#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) |
||||
|
||||
#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) |
||||
#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) |
||||
#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) |
||||
#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA) |
||||
#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL) |
||||
|
||||
/* QoS Control Field */ |
||||
|
||||
/* 802.1D Tag */ |
||||
#define QOS_PRIO_SHIFT 0 |
||||
#define QOS_PRIO_MASK 0x0007 |
||||
#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT) |
||||
|
||||
/* Ack Policy (0 means Acknowledge) */ |
||||
#define QOS_ACK_SHIFT 5 |
||||
#define QOS_ACK_MASK 0x0060 |
||||
#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT) |
||||
|
||||
/* Management Frames */ |
||||
|
||||
/* Management Frame Constants */ |
||||
|
||||
/* Fixed fields */ |
||||
#define DOT11_MNG_AUTH_ALGO_LEN 2 |
||||
#define DOT11_MNG_AUTH_SEQ_LEN 2 |
||||
#define DOT11_MNG_BEACON_INT_LEN 2 |
||||
#define DOT11_MNG_CAP_LEN 2 |
||||
#define DOT11_MNG_AP_ADDR_LEN 6 |
||||
#define DOT11_MNG_LISTEN_INT_LEN 2 |
||||
#define DOT11_MNG_REASON_LEN 2 |
||||
#define DOT11_MNG_AID_LEN 2 |
||||
#define DOT11_MNG_STATUS_LEN 2 |
||||
#define DOT11_MNG_TIMESTAMP_LEN 8 |
||||
|
||||
/* DUR/ID field in assoc resp is 0xc000 | AID */ |
||||
#define DOT11_AID_MASK 0x3fff |
||||
|
||||
/* Reason Codes */ |
||||
#define DOT11_RC_RESERVED 0 |
||||
#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */ |
||||
#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */ |
||||
#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is |
||||
leaving (or has left) IBSS or ESS */ |
||||
#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */ |
||||
#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle |
||||
all currently associated stations */ |
||||
#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from |
||||
nonauthenticated station */ |
||||
#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from |
||||
nonassociated station */ |
||||
#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is |
||||
leaving (or has left) BSS */ |
||||
#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is |
||||
not authenticated with responding station */ |
||||
#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */ |
||||
|
||||
/* Status Codes */ |
||||
#define DOT11_STATUS_SUCCESS 0 /* Successful */ |
||||
#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */ |
||||
#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities |
||||
in the Capability Information field */ |
||||
#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to |
||||
confirm that association exists */ |
||||
#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside |
||||
the scope of this standard */ |
||||
#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the |
||||
specified authentication algorithm */ |
||||
#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with |
||||
authentication transaction sequence number |
||||
out of expected sequence */ |
||||
#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */ |
||||
#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting |
||||
for next frame in sequence */ |
||||
#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to |
||||
handle additional associated stations */ |
||||
#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station |
||||
not supporting all of the data rates in the |
||||
BSSBasicRateSet parameter */ |
||||
#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station |
||||
not supporting the Short Preamble option */ |
||||
#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station |
||||
not supporting the PBCC Modulation option */ |
||||
#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station |
||||
not supporting the Channel Agility option */ |
||||
#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management |
||||
capability is required. */ |
||||
#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the |
||||
Power Cap element is unacceptable. */ |
||||
#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the |
||||
Supported Channel element is unacceptable */ |
||||
#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station |
||||
not supporting the Short Slot Time option */ |
||||
#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station |
||||
not supporting the ER-PBCC Modulation option */ |
||||
#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station |
||||
not supporting the DSS-OFDM option */ |
||||
|
||||
/* Info Elts, length of INFORMATION portion of Info Elts */ |
||||
#define DOT11_MNG_DS_PARAM_LEN 1 |
||||
#define DOT11_MNG_IBSS_PARAM_LEN 2 |
||||
|
||||
/* TIM Info element has 3 bytes fixed info in INFORMATION field,
|
||||
* followed by 1 to 251 bytes of Partial Virtual Bitmap */ |
||||
#define DOT11_MNG_TIM_FIXED_LEN 3 |
||||
#define DOT11_MNG_TIM_DTIM_COUNT 0 |
||||
#define DOT11_MNG_TIM_DTIM_PERIOD 1 |
||||
#define DOT11_MNG_TIM_BITMAP_CTL 2 |
||||
#define DOT11_MNG_TIM_PVB 3 |
||||
|
||||
/* TLV defines */ |
||||
#define TLV_TAG_OFF 0 |
||||
#define TLV_LEN_OFF 1 |
||||
#define TLV_HDR_LEN 2 |
||||
#define TLV_BODY_OFF 2 |
||||
|
||||
/* Management Frame Information Element IDs */ |
||||
#define DOT11_MNG_SSID_ID 0 |
||||
#define DOT11_MNG_RATES_ID 1 |
||||
#define DOT11_MNG_FH_PARMS_ID 2 |
||||
#define DOT11_MNG_DS_PARMS_ID 3 |
||||
#define DOT11_MNG_CF_PARMS_ID 4 |
||||
#define DOT11_MNG_TIM_ID 5 |
||||
#define DOT11_MNG_IBSS_PARMS_ID 6 |
||||
#define DOT11_MNG_COUNTRY_ID 7 |
||||
#define DOT11_MNG_HOPPING_PARMS_ID 8 |
||||
#define DOT11_MNG_HOPPING_TABLE_ID 9 |
||||
#define DOT11_MNG_REQUEST_ID 10 |
||||
#define DOT11_MNG_CHALLENGE_ID 16 |
||||
#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */ |
||||
#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */ |
||||
#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */ |
||||
#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */ |
||||
#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */ |
||||
#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/ |
||||
#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */ |
||||
#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */ |
||||
#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */ |
||||
#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */ |
||||
#define DOT11_MNG_ERP_ID 42 |
||||
#define DOT11_MNG_NONERP_ID 47 |
||||
#define DOT11_MNG_EXT_RATES_ID 50 |
||||
#define DOT11_MNG_WPA_ID 221 |
||||
#define DOT11_MNG_PROPR_ID 221 |
||||
|
||||
/* ERP info element bit values */ |
||||
#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */ |
||||
#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */ |
||||
#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */ |
||||
#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */ |
||||
|
||||
/* Capability Information Field */ |
||||
#define DOT11_CAP_ESS 0x0001 |
||||
#define DOT11_CAP_IBSS 0x0002 |
||||
#define DOT11_CAP_POLLABLE 0x0004 |
||||
#define DOT11_CAP_POLL_RQ 0x0008 |
||||
#define DOT11_CAP_PRIVACY 0x0010 |
||||
#define DOT11_CAP_SHORT 0x0020 |
||||
#define DOT11_CAP_PBCC 0x0040 |
||||
#define DOT11_CAP_AGILITY 0x0080 |
||||
#define DOT11_CAP_SPECTRUM 0x0100 |
||||
#define DOT11_CAP_SHORTSLOT 0x0400 |
||||
#define DOT11_CAP_CCK_OFDM 0x2000 |
||||
|
||||
/* Action Frame Constants */ |
||||
#define DOT11_ACTION_CAT_ERR_MASK 0x80 |
||||
#define DOT11_ACTION_CAT_SPECT_MNG 0x00 |
||||
#define DOT11_ACTION_NOTIFICATION 0x11 /* 17 */ |
||||
|
||||
#define DOT11_ACTION_ID_M_REQ 0 |
||||
#define DOT11_ACTION_ID_M_REP 1 |
||||
#define DOT11_ACTION_ID_TPC_REQ 2 |
||||
#define DOT11_ACTION_ID_TPC_REP 3 |
||||
#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 |
||||
|
||||
/* MLME Enumerations */ |
||||
#define DOT11_BSSTYPE_INFRASTRUCTURE 0 |
||||
#define DOT11_BSSTYPE_INDEPENDENT 1 |
||||
#define DOT11_BSSTYPE_ANY 2 |
||||
#define DOT11_SCANTYPE_ACTIVE 0 |
||||
#define DOT11_SCANTYPE_PASSIVE 1 |
||||
|
||||
/* 802.11 A PHY constants */ |
||||
#define APHY_SLOT_TIME 9 |
||||
#define APHY_SIFS_TIME 16 |
||||
#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) |
||||
#define APHY_PREAMBLE_TIME 16 |
||||
#define APHY_SIGNAL_TIME 4 |
||||
#define APHY_SYMBOL_TIME 4 |
||||
#define APHY_SERVICE_NBITS 16 |
||||
#define APHY_TAIL_NBITS 6 |
||||
#define APHY_CWMIN 15 |
||||
|
||||
/* 802.11 B PHY constants */ |
||||
#define BPHY_SLOT_TIME 20 |
||||
#define BPHY_SIFS_TIME 10 |
||||
#define BPHY_DIFS_TIME 50 |
||||
#define BPHY_PLCP_TIME 192 |
||||
#define BPHY_PLCP_SHORT_TIME 96 |
||||
#define BPHY_CWMIN 31 |
||||
|
||||
/* 802.11 G constants */ |
||||
#define DOT11_OFDM_SIGNAL_EXTENSION 6 |
||||
|
||||
#define PHY_CWMAX 1023 |
||||
|
||||
#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */ |
||||
|
||||
/* dot11Counters Table - 802.11 spec., Annex D */ |
||||
typedef struct d11cnt { |
||||
uint32 txfrag; /* dot11TransmittedFragmentCount */ |
||||
uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ |
||||
uint32 txfail; /* dot11FailedCount */ |
||||
uint32 txretry; /* dot11RetryCount */ |
||||
uint32 txretrie; /* dot11MultipleRetryCount */ |
||||
uint32 rxdup; /* dot11FrameduplicateCount */ |
||||
uint32 txrts; /* dot11RTSSuccessCount */ |
||||
uint32 txnocts; /* dot11RTSFailureCount */ |
||||
uint32 txnoack; /* dot11ACKFailureCount */ |
||||
uint32 rxfrag; /* dot11ReceivedFragmentCount */ |
||||
uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ |
||||
uint32 rxcrc; /* dot11FCSErrorCount */ |
||||
uint32 txfrmsnt; /* dot11TransmittedFrameCount */ |
||||
uint32 rxundec; /* dot11WEPUndecryptableCount */ |
||||
} d11cnt_t; |
||||
|
||||
/* BRCM OUI */ |
||||
#define BRCM_OUI "\x00\x10\x18" |
||||
|
||||
/* BRCM info element */ |
||||
struct brcm_ie { |
||||
uchar id;
|
||||
uchar len;
|
||||
uchar oui[3]; |
||||
uchar ver; |
||||
uchar assoc; /* # of assoc STAs */ |
||||
uchar flags; /* misc flags */ |
||||
} PACKED; |
||||
#define BRCM_IE_LEN 8 |
||||
typedef struct brcm_ie brcm_ie_t; |
||||
#define BRCM_IE_VER 1 |
||||
|
||||
/* brcm_ie flags */ |
||||
#define BRF_ABCAP 0x1 /* afterburner capable */ |
||||
#define BRF_ABRQRD 0x2 /* afterburner requested */ |
||||
|
||||
/* WPA definitions */ |
||||
#define WPA_VERSION 1 |
||||
#define WPA_OUI "\x00\x50\xF2" |
||||
|
||||
#define WPA_OUI_LEN 3 |
||||
|
||||
/* WPA authentication modes */ |
||||
#define WPA_AUTH_NONE 0 /* None */ |
||||
#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */ |
||||
#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */ |
||||
#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */ |
||||
|
||||
#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \ |
||||
(auth) == WPA_AUTH_UNSPECIFIED || \
|
||||
(auth) == WPA_AUTH_PSK) |
||||
|
||||
|
||||
/* Key related defines */ |
||||
#define DOT11_MAX_DEFAULT_KEYS 4 /* number of default keys */ |
||||
#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */ |
||||
#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */ |
||||
#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ |
||||
|
||||
#define WEP1_KEY_SIZE 5 /* max size of any WEP key */ |
||||
#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ |
||||
#define WEP128_KEY_SIZE 13 /* max size of any WEP key */ |
||||
#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ |
||||
#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */ |
||||
#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ |
||||
#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ |
||||
#define TKIP_KEY_SIZE 32 /* size of any TKIP key */ |
||||
#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ |
||||
#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ |
||||
#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ |
||||
#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ |
||||
#define AES_KEY_SIZE 16 /* size of AES key */ |
||||
|
||||
#undef PACKED |
||||
#if !defined(__GNUC__) |
||||
#pragma pack() |
||||
#endif |
||||
|
||||
#endif /* _802_11_H_ */ |
@ -0,0 +1,164 @@ |
||||
/*******************************************************************************
|
||||
* $Id$ |
||||
* Copyright 2004, Broadcom Corporation
|
||||
* All Rights Reserved.
|
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
|
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
|
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
|
||||
* From FreeBSD 2.2.7: Fundamental constants relating to ethernet. |
||||
******************************************************************************/ |
||||
|
||||
#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */ |
||||
#define _NET_ETHERNET_H_ |
||||
|
||||
#ifndef _TYPEDEFS_H_ |
||||
#include "typedefs.h" |
||||
#endif |
||||
|
||||
#if defined(__GNUC__) |
||||
#define PACKED __attribute__((packed)) |
||||
#else |
||||
#define PACKED |
||||
#endif |
||||
|
||||
/*
|
||||
* The number of bytes in an ethernet (MAC) address. |
||||
*/ |
||||
#define ETHER_ADDR_LEN 6 |
||||
|
||||
/*
|
||||
* The number of bytes in the type field. |
||||
*/ |
||||
#define ETHER_TYPE_LEN 2 |
||||
|
||||
/*
|
||||
* The number of bytes in the trailing CRC field. |
||||
*/ |
||||
#define ETHER_CRC_LEN 4 |
||||
|
||||
/*
|
||||
* The length of the combined header. |
||||
*/ |
||||
#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) |
||||
|
||||
/*
|
||||
* The minimum packet length. |
||||
*/ |
||||
#define ETHER_MIN_LEN 64 |
||||
|
||||
/*
|
||||
* The minimum packet user data length. |
||||
*/ |
||||
#define ETHER_MIN_DATA 46 |
||||
|
||||
/*
|
||||
* The maximum packet length. |
||||
*/ |
||||
#define ETHER_MAX_LEN 1518 |
||||
|
||||
/*
|
||||
* The maximum packet user data length. |
||||
*/ |
||||
#define ETHER_MAX_DATA 1500 |
||||
|
||||
/*
|
||||
* Used to uniquely identify a 802.1q VLAN-tagged header. |
||||
*/ |
||||
#define VLAN_TAG 0x8100 |
||||
|
||||
/*
|
||||
* Located after dest & src address in ether header. |
||||
*/ |
||||
#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2) |
||||
|
||||
/*
|
||||
* 4 bytes of vlan field info. |
||||
*/ |
||||
#define VLAN_FIELDS_SIZE 4 |
||||
|
||||
/* location of bits in 16-bit vlan fields */ |
||||
#define VLAN_PRI_SHIFT 13 /* user priority */ |
||||
#define VLAN_CFI_SHIFT 12 /* canonical format indicator bit */ |
||||
|
||||
/* 3 bits of priority */ |
||||
#define VLAN_PRI_MASK 7 |
||||
/* 12 bits of vlan identfier (VID) */ |
||||
#define VLAN_VID_MASK 0xFFF /* VLAN identifier (VID) field */ |
||||
|
||||
struct vlan_tags { |
||||
uint16 tag_type; /* 0x8100 for VLAN */ |
||||
uint16 tag_control; /* prio | cfi | vid */ |
||||
} PACKED ; |
||||
|
||||
/* 802.1X ethertype */ |
||||
|
||||
#define ETHER_TYPE_IP 0x0800 /* IP */ |
||||
#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */ |
||||
#define ETHER_TYPE_802_1X 0x888e /* 802.1x */ |
||||
|
||||
#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4byte subtype follows ethertype */ |
||||
#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */ |
||||
|
||||
/*
|
||||
* A macro to validate a length with |
||||
*/ |
||||
#define ETHER_IS_VALID_LEN(foo) \ |
||||
((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) |
||||
|
||||
|
||||
#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ |
||||
/*
|
||||
* Structure of a 10Mb/s Ethernet header. |
||||
*/ |
||||
struct ether_header { |
||||
uint8 ether_dhost[ETHER_ADDR_LEN]; |
||||
uint8 ether_shost[ETHER_ADDR_LEN]; |
||||
uint16 ether_type; |
||||
} PACKED ; |
||||
|
||||
/*
|
||||
* Structure of a 48-bit Ethernet address. |
||||
*/ |
||||
struct ether_addr { |
||||
uint8 octet[ETHER_ADDR_LEN]; |
||||
} PACKED ; |
||||
#endif |
||||
|
||||
/*
|
||||
* Takes a pointer, returns true if a 48-bit multicast address |
||||
* (including broadcast, since it is all ones) |
||||
*/ |
||||
#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) |
||||
|
||||
/*
|
||||
* Takes a pointer, returns true if a 48-bit broadcast (all ones) |
||||
*/ |
||||
#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ |
||||
((uint8 *)(ea))[1] & \
|
||||
((uint8 *)(ea))[2] & \
|
||||
((uint8 *)(ea))[3] & \
|
||||
((uint8 *)(ea))[4] & \
|
||||
((uint8 *)(ea))[5]) == 0xff) |
||||
|
||||
static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; |
||||
|
||||
/*
|
||||
* Takes a pointer, returns true if a 48-bit null address (all zeros) |
||||
*/ |
||||
#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ |
||||
((uint8 *)(ea))[1] | \
|
||||
((uint8 *)(ea))[2] | \
|
||||
((uint8 *)(ea))[3] | \
|
||||
((uint8 *)(ea))[4] | \
|
||||
((uint8 *)(ea))[5]) == 0) |
||||
|
||||
/* Differentiated Services Codepoint - lower 6 bits of tos in iphdr */ |
||||
#define DSCP_PRI_MASK 0x3F /* bits 0-6 */ |
||||
#define DSCP_WME_PRI_MASK 0x38 /* bits 3-6 */ |
||||
#define DSCP_WME_PRI_SHIFT 3 |
||||
|
||||
#undef PACKED |
||||
|
||||
#endif /* _NET_ETHERNET_H_ */ |
@ -0,0 +1,200 @@ |
||||
/*
|
||||
* Shell-like utility functions |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#ifndef _shutils_h_ |
||||
#define _shutils_h_ |
||||
#include <string.h> |
||||
/*
|
||||
* Reads file and returns contents |
||||
* @param fd file descriptor |
||||
* @return contents of file or NULL if an error occurred |
||||
*/ |
||||
extern char * fd2str(int fd); |
||||
|
||||
/*
|
||||
* Reads file and returns contents |
||||
* @param path path to file |
||||
* @return contents of file or NULL if an error occurred |
||||
*/ |
||||
extern char * file2str(const char *path); |
||||
|
||||
/*
|
||||
* Waits for a file descriptor to become available for reading or unblocked signal |
||||
* @param fd file descriptor |
||||
* @param timeout seconds to wait before timing out or 0 for no timeout |
||||
* @return 1 if descriptor changed status or 0 if timed out or -1 on error |
||||
*/ |
||||
extern int waitfor(int fd, int timeout); |
||||
|
||||
/*
|
||||
* Concatenates NULL-terminated list of arguments into a single |
||||
* commmand and executes it |
||||
* @param argv argument list |
||||
* @param path NULL, ">output", or ">>output" |
||||
* @param timeout seconds to wait before timing out or 0 for no timeout |
||||
* @param ppid NULL to wait for child termination or pointer to pid |
||||
* @return return value of executed command or errno |
||||
*/ |
||||
extern int _eval(char *const argv[], char *path, int timeout, pid_t *ppid); |
||||
|
||||
/*
|
||||
* Concatenates NULL-terminated list of arguments into a single |
||||
* commmand and executes it |
||||
* @param argv argument list |
||||
* @return stdout of executed command or NULL if an error occurred |
||||
*/ |
||||
extern char * _backtick(char *const argv[]); |
||||
|
||||
/*
|
||||
* Kills process whose PID is stored in plaintext in pidfile |
||||
* @param pidfile PID file |
||||
* @return 0 on success and errno on failure |
||||
*/ |
||||
extern int kill_pidfile(char *pidfile); |
||||
|
||||
/*
|
||||
* fread() with automatic retry on syscall interrupt |
||||
* @param ptr location to store to |
||||
* @param size size of each element of data |
||||
* @param nmemb number of elements |
||||
* @param stream file stream |
||||
* @return number of items successfully read |
||||
*/ |
||||
extern int safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream); |
||||
|
||||
/*
|
||||
* fwrite() with automatic retry on syscall interrupt |
||||
* @param ptr location to read from |
||||
* @param size size of each element of data |
||||
* @param nmemb number of elements |
||||
* @param stream file stream |
||||
* @return number of items successfully written |
||||
*/ |
||||
extern int safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream); |
||||
|
||||
/*
|
||||
* Convert Ethernet address string representation to binary data |
||||
* @param a string in xx:xx:xx:xx:xx:xx notation |
||||
* @param e binary data |
||||
* @return TRUE if conversion was successful and FALSE otherwise |
||||
*/ |
||||
extern int ether_atoe(const char *a, unsigned char *e); |
||||
|
||||
/*
|
||||
* Convert Ethernet address binary data to string representation |
||||
* @param e binary data |
||||
* @param a string in xx:xx:xx:xx:xx:xx notation |
||||
* @return a |
||||
*/ |
||||
extern char * ether_etoa(const unsigned char *e, char *a); |
||||
|
||||
/*
|
||||
* Concatenate two strings together into a caller supplied buffer |
||||
* @param s1 first string |
||||
* @param s2 second string |
||||
* @param buf buffer large enough to hold both strings |
||||
* @return buf |
||||
*/ |
||||
static inline char * strcat_r(const char *s1, const char *s2, char *buf) |
||||
{ |
||||
strcpy(buf, s1); |
||||
strcat(buf, s2); |
||||
return buf; |
||||
}
|
||||
|
||||
/* Check for a blank character; that is, a space or a tab */ |
||||
#define isblank(c) ((c) == ' ' || (c) == '\t') |
||||
|
||||
/* Strip trailing CR/NL from string <s> */ |
||||
#define chomp(s) ({ \ |
||||
char *c = (s) + strlen((s)) - 1; \
|
||||
while ((c > (s)) && (*c == '\n' || *c == '\r' || *c == ' ')) \
|
||||
*c-- = '\0'; \
|
||||
s; \
|
||||
}) |
||||
|
||||
/* Simple version of _backtick() */ |
||||
#define backtick(cmd, args...) ({ \ |
||||
char *argv[] = { cmd, ## args, NULL }; \
|
||||
_backtick(argv); \
|
||||
}) |
||||
|
||||
/* Simple version of _eval() (no timeout and wait for child termination) */ |
||||
#define eval(cmd, args...) ({ \ |
||||
char *argv[] = { cmd, ## args, NULL }; \
|
||||
_eval(argv, ">/dev/console", 0, NULL); \
|
||||
}) |
||||
|
||||
/* Copy each token in wordlist delimited by space into word */ |
||||
#define foreach(word, wordlist, next) \ |
||||
for (next = &wordlist[strspn(wordlist, " ")], \
|
||||
strncpy(word, next, sizeof(word)), \
|
||||
word[strcspn(word, " ")] = '\0', \
|
||||
word[sizeof(word) - 1] = '\0', \
|
||||
next = strchr(next, ' '); \
|
||||
strlen(word); \
|
||||
next = next ? &next[strspn(next, " ")] : "", \
|
||||
strncpy(word, next, sizeof(word)), \
|
||||
word[strcspn(word, " ")] = '\0', \
|
||||
word[sizeof(word) - 1] = '\0', \
|
||||
next = strchr(next, ' ')) |
||||
|
||||
/* Return NUL instead of NULL if undefined */ |
||||
#define safe_getenv(s) (getenv(s) ? : "") |
||||
|
||||
/* Print directly to the console */ |
||||
#define cprintf(fmt, args...) do { \ |
||||
FILE *fp = fopen("/dev/console", "w"); \
|
||||
if (fp) { \
|
||||
fprintf(fp, fmt, ## args); \
|
||||
fclose(fp); \
|
||||
} \
|
||||
} while (0) |
||||
|
||||
/* Debug print */ |
||||
#ifdef DEBUG |
||||
#define dprintf(fmt, args...) cprintf("%s: " fmt, __FUNCTION__, ## args) |
||||
#else |
||||
#define dprintf(fmt, args...) |
||||
#endif |
||||
|
||||
#ifdef vxworks |
||||
|
||||
#include <inetLib.h> |
||||
#define inet_aton(a, n) ((inet_aton((a), (n)) == ERROR) ? 0 : 1) |
||||
#define inet_ntoa(n) ({ char a[INET_ADDR_LEN]; inet_ntoa_b ((n), a); a; }) |
||||
|
||||
#include <typedefs.h> |
||||
#include <bcmutils.h> |
||||
#define ether_atoe(a, e) bcm_ether_atoe((a), (e)) |
||||
#define ether_etoa(e, a) bcm_ether_ntoa((e), (a)) |
||||
|
||||
/* These declarations are not available where you would expect them */ |
||||
extern int vsnprintf (char *, size_t, const char *, va_list); |
||||
extern int snprintf(char *str, size_t count, const char *fmt, ...); |
||||
extern char *strdup(const char *); |
||||
extern char *strsep(char **stringp, char *delim); |
||||
extern int strcasecmp(const char *s1, const char *s2);
|
||||
extern int strncasecmp(const char *s1, const char *s2, size_t n);
|
||||
|
||||
/* Neither are socket() and connect() */ |
||||
#include <sockLib.h> |
||||
|
||||
#ifdef DEBUG |
||||
#undef dprintf |
||||
#define dprintf printf |
||||
#endif |
||||
#endif |
||||
|
||||
#endif /* _shutils_h_ */ |
@ -0,0 +1,293 @@ |
||||
/*
|
||||
* Copyright 2004, Broadcom Corporation
|
||||
* All Rights Reserved.
|
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
|
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
|
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
|
||||
* $Id$ |
||||
*/ |
||||
|
||||
#ifndef _TYPEDEFS_H_ |
||||
#define _TYPEDEFS_H_ |
||||
|
||||
|
||||
/* Define 'SITE_TYPEDEFS' in the compile to include a site specific
|
||||
* typedef file "site_typedefs.h". |
||||
* |
||||
* If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" |
||||
* section of this file makes inferences about the compile environment |
||||
* based on defined symbols and possibly compiler pragmas. |
||||
* |
||||
* Following these two sections is the "Default Typedefs" |
||||
* section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is |
||||
* defined. This section has a default set of typedefs and a few |
||||
* proprocessor symbols (TRUE, FALSE, NULL, ...). |
||||
*/ |
||||
|
||||
#ifdef SITE_TYPEDEFS |
||||
|
||||
/*******************************************************************************
|
||||
* Site Specific Typedefs |
||||
*******************************************************************************/ |
||||
|
||||
#include "site_typedefs.h" |
||||
|
||||
#else |
||||
|
||||
/*******************************************************************************
|
||||
* Inferred Typedefs |
||||
*******************************************************************************/ |
||||
|
||||
/* Infer the compile environment based on preprocessor symbols and pramas.
|
||||
* Override type definitions as needed, and include configuration dependent |
||||
* header files to define types. |
||||
*/ |
||||
|
||||
#ifdef __cplusplus |
||||
|
||||
#define TYPEDEF_BOOL |
||||
#ifndef FALSE |
||||
#define FALSE false |
||||
#endif |
||||
#ifndef TRUE |
||||
#define TRUE true |
||||
#endif |
||||
|
||||
#else /* ! __cplusplus */ |
||||
|
||||
/* for Windows build, define bool as a uchar instead of the default int */ |
||||
#if defined(_WIN32) |
||||
|
||||
#define TYPEDEF_BOOL |
||||
typedef unsigned char bool; |
||||
|
||||
#endif /* _WIN32 */ |
||||
|
||||
#endif /* ! __cplusplus */ |
||||
|
||||
#ifdef _MSC_VER /* Microsoft C */ |
||||
#define TYPEDEF_INT64 |
||||
#define TYPEDEF_UINT64 |
||||
typedef signed __int64 int64; |
||||
typedef unsigned __int64 uint64; |
||||
#endif |
||||
|
||||
#if defined(MACOSX) && defined(KERNEL) |
||||
#define TYPEDEF_BOOL |
||||
#endif |
||||
|
||||
|
||||
#if defined(linux) |
||||
#define TYPEDEF_UINT |
||||
#define TYPEDEF_USHORT |
||||
#define TYPEDEF_ULONG |
||||
#endif |
||||
|
||||
#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) |
||||
#define TYPEDEF_UINT |
||||
#define TYPEDEF_USHORT |
||||
#endif |
||||
|
||||
|
||||
/* Do not support the (u)int64 types with strict ansi for GNU C */ |
||||
#if defined(__GNUC__) && defined(__STRICT_ANSI__) |
||||
#define TYPEDEF_INT64 |
||||
#define TYPEDEF_UINT64 |
||||
#endif |
||||
|
||||
/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
|
||||
* for singned or unsigned */ |
||||
#if defined(__ICL) |
||||
|
||||
#define TYPEDEF_INT64 |
||||
|
||||
#if defined(__STDC__) |
||||
#define TYPEDEF_UINT64 |
||||
#endif |
||||
|
||||
#endif /* __ICL */ |
||||
|
||||
|
||||
#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) |
||||
|
||||
/* pick up ushort & uint from standard types.h */ |
||||
#if defined(linux) && defined(__KERNEL__) |
||||
|
||||
#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */ |
||||
|
||||
#else |
||||
|
||||
#include <sys/types.h> |
||||
|
||||
#endif |
||||
|
||||
#endif /* !_WIN32 && !PMON && !_CFE_ */ |
||||
|
||||
#if defined(MACOSX) && defined(KERNEL) |
||||
#include <IOKit/IOTypes.h> |
||||
#endif |
||||
|
||||
|
||||
/* use the default typedefs in the next section of this file */ |
||||
#define USE_TYPEDEF_DEFAULTS |
||||
|
||||
#endif /* SITE_TYPEDEFS */ |
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Default Typedefs |
||||
*******************************************************************************/ |
||||
|
||||
#ifdef USE_TYPEDEF_DEFAULTS |
||||
#undef USE_TYPEDEF_DEFAULTS |
||||
|
||||
#ifndef TYPEDEF_BOOL |
||||
typedef int bool; |
||||
#endif |
||||
|
||||
/*----------------------- define uchar, ushort, uint, ulong ----------------*/ |
||||
|
||||
#ifndef TYPEDEF_UCHAR |
||||
typedef unsigned char uchar; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_USHORT |
||||
typedef unsigned short ushort; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_UINT |
||||
typedef unsigned int uint; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_ULONG |
||||
typedef unsigned long ulong; |
||||
#endif |
||||
|
||||
/*----------------------- define [u]int8/16/32/64 --------------------------*/ |
||||
|
||||
#ifndef TYPEDEF_UINT8 |
||||
typedef unsigned char uint8; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_UINT16 |
||||
typedef unsigned short uint16; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_UINT32 |
||||
typedef unsigned int uint32; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_UINT64 |
||||
typedef unsigned long long uint64; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_INT8 |
||||
typedef signed char int8; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_INT16 |
||||
typedef signed short int16; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_INT32 |
||||
typedef signed int int32; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_INT64 |
||||
typedef signed long long int64; |
||||
#endif |
||||
|
||||
/*----------------------- define float32/64, float_t -----------------------*/ |
||||
|
||||
#ifndef TYPEDEF_FLOAT32 |
||||
typedef float float32; |
||||
#endif |
||||
|
||||
#ifndef TYPEDEF_FLOAT64 |
||||
typedef double float64; |
||||
#endif |
||||
|
||||
/*
|
||||
* abstracted floating point type allows for compile time selection of |
||||
* single or double precision arithmetic. Compiling with -DFLOAT32 |
||||
* selects single precision; the default is double precision. |
||||
*/ |
||||
|
||||
#ifndef TYPEDEF_FLOAT_T |
||||
|
||||
#if defined(FLOAT32) |
||||
typedef float32 float_t; |
||||
#else /* default to double precision floating point */ |
||||
typedef float64 float_t; |
||||
#endif |
||||
|
||||
#endif /* TYPEDEF_FLOAT_T */ |
||||
|
||||
/*----------------------- define macro values -----------------------------*/ |
||||
|
||||
#ifndef FALSE |
||||
#define FALSE 0 |
||||
#endif |
||||
|
||||
#ifndef TRUE |
||||
#define TRUE 1 |
||||
#endif |
||||
|
||||
#ifndef NULL |
||||
#define NULL 0 |
||||
#endif |
||||
|
||||
#ifndef OFF |
||||
#define OFF 0 |
||||
#endif |
||||
|
||||
#ifndef ON |
||||
#define ON 1 |
||||
#endif |
||||
|
||||
/*----------------------- define PTRSZ, INLINE ----------------------------*/ |
||||
|
||||
#ifndef PTRSZ |
||||
#define PTRSZ sizeof (char*) |
||||
#endif |
||||
|
||||
#ifndef INLINE |
||||
|
||||
#ifdef _MSC_VER |
||||
|
||||
#define INLINE __inline |
||||
|
||||
#elif __GNUC__ |
||||
|
||||
#define INLINE __inline__ |
||||
|
||||
#else |
||||
|
||||
#define INLINE |
||||
|
||||
#endif /* _MSC_VER */ |
||||
|
||||
#endif /* INLINE */ |
||||
|
||||
#undef TYPEDEF_BOOL |
||||
#undef TYPEDEF_UCHAR |
||||
#undef TYPEDEF_USHORT |
||||
#undef TYPEDEF_UINT |
||||
#undef TYPEDEF_ULONG |
||||
#undef TYPEDEF_UINT8 |
||||
#undef TYPEDEF_UINT16 |
||||
#undef TYPEDEF_UINT32 |
||||
#undef TYPEDEF_UINT64 |
||||
#undef TYPEDEF_INT8 |
||||
#undef TYPEDEF_INT16 |
||||
#undef TYPEDEF_INT32 |
||||
#undef TYPEDEF_INT64 |
||||
#undef TYPEDEF_FLOAT32 |
||||
#undef TYPEDEF_FLOAT64 |
||||
#undef TYPEDEF_FLOAT_T |
||||
|
||||
#endif /* USE_TYPEDEF_DEFAULTS */ |
||||
|
||||
#endif /* _TYPEDEFS_H_ */ |
@ -0,0 +1,131 @@ |
||||
#include <cy_conf.h> |
||||
|
||||
extern int diag_led(int type, int act); |
||||
extern int C_led(int i); |
||||
extern int get_single_ip(char *ipaddr, int which); |
||||
extern char *get_mac_from_ip(char *ip); |
||||
extern struct dns_lists *get_dns_list(int no); |
||||
extern int dns_to_resolv(void); |
||||
extern char *get_wan_face(void); |
||||
extern int check_wan_link(int num); |
||||
extern char *get_complete_lan_ip(char *ip); |
||||
extern int get_int_len(int num); |
||||
extern int file_to_buf(char *path, char *buf, int len); |
||||
extern int buf_to_file(char *path, char *buf); |
||||
extern pid_t* find_pid_by_name( char* pidName); |
||||
extern int find_pid_by_ps(char* pidName); |
||||
extern int *find_all_pid_by_ps(char* pidName); |
||||
extern char *find_name_by_proc(int pid); |
||||
extern int get_ppp_pid(char *file); |
||||
extern long convert_ver(char *ver); |
||||
extern int check_flash(void); |
||||
extern int check_action(void); |
||||
extern int check_now_boot(void); |
||||
extern int check_hw_type(void); |
||||
extern int is_exist(char *filename); |
||||
extern void set_ip_forward(char c); |
||||
struct mtu_lists *get_mtu(char *proto); |
||||
extern void set_host_domain_name(void); |
||||
|
||||
extern void encode(char *buf, int len); |
||||
extern void decode(char *buf, int len); |
||||
|
||||
extern int sys_netdev_ioctl(int family, int socket, char *if_name, int cmd, struct ifreq *ifr); |
||||
|
||||
int ct_openlog(const char *ident, int option, int facility, char *log_name); |
||||
void ct_syslog(int level, int enable, const char *fmt,...); |
||||
void ct_logger(int level, const char *fmt,...); |
||||
struct wl_assoc_mac * get_wl_assoc_mac(int *c); |
||||
|
||||
|
||||
|
||||
enum { DMZ, SESSION, DIAG , WL}; |
||||
|
||||
enum { START_LED, STOP_LED }; |
||||
|
||||
typedef enum { ACT_IDLE,
|
||||
ACT_TFTP_UPGRADE,
|
||||
ACT_WEB_UPGRADE,
|
||||
ACT_WEBS_UPGRADE,
|
||||
ACT_SW_RESTORE,
|
||||
ACT_HW_RESTORE } ACTION; |
||||
|
||||
enum { UNKNOWN_BOOT = -1, PMON_BOOT, CFE_BOOT }; |
||||
|
||||
enum { BCM4702_CHIP, BCM4712_CHIP, BCM5325E_CHIP }; |
||||
|
||||
enum { FIRST, SECOND }; |
||||
|
||||
enum { SYSLOG_LOG=1, SYSLOG_DEBUG, CONSOLE_ONLY, LOG_CONSOLE, DEBUG_CONSOLE }; |
||||
|
||||
#define ACTION(cmd) buf_to_file(ACTION_FILE, cmd) |
||||
|
||||
struct dns_lists { |
||||
int num_servers; |
||||
char dns_server[4][16]; |
||||
}; |
||||
|
||||
#define NOT_USING 0 |
||||
#define USING 1 |
||||
|
||||
struct wl_assoc_mac |
||||
{ |
||||
char mac[18]; |
||||
}; |
||||
|
||||
struct mtu_lists { |
||||
char *proto; /* protocol */ |
||||
char *min; /* min mtu */ |
||||
char *max; /* max mtu */ |
||||
}; |
||||
|
||||
|
||||
#define PPP_PSEUDO_IP "10.64.64.64" |
||||
#define PPP_PSEUDO_NM "255.255.255.255" |
||||
#define PPP_PSEUDO_GW "10.112.112.112" |
||||
|
||||
#define PING_TMP "/tmp/ping.log" |
||||
#define TRACEROUTE_TMP "/tmp/traceroute.log" |
||||
#define MAX_BUF_LEN 254 |
||||
|
||||
#define RESOLV_FILE "/tmp/resolv.conf" |
||||
#define HOSTS_FILE "/tmp/hosts" |
||||
|
||||
#define LOG_FILE "/var/log/mess" |
||||
|
||||
#define ACTION_FILE "/tmp/action" |
||||
|
||||
|
||||
#define split(word, wordlist, next, delim) \ |
||||
for (next = wordlist, \
|
||||
strncpy(word, next, sizeof(word)), \
|
||||
word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \
|
||||
next = next ? next + sizeof(delim) - 1 : NULL ; \
|
||||
strlen(word); \
|
||||
next = next ? : "", \
|
||||
strncpy(word, next, sizeof(word)), \
|
||||
word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \
|
||||
next = next ? next + sizeof(delim) - 1 : NULL) |
||||
|
||||
#define STRUCT_LEN(name) sizeof(name)/sizeof(name[0]) |
||||
|
||||
#define printHEX(str,len) { \ |
||||
int i; \
|
||||
for (i=0 ; i<len ; i++) { \
|
||||
printf("%02X ", (unsigned char)*(str+i)); \
|
||||
if(((i+1)%16) == 0) printf("- "); \
|
||||
if(((i+1)%32) == 0) printf("\n"); \
|
||||
} \
|
||||
printf("\n\n"); \
|
||||
} |
||||
|
||||
|
||||
#define printASC(str,len) { \ |
||||
int i; \
|
||||
for (i=0 ; i<len ; i++) { \
|
||||
printf("%c", (unsigned char)*(str+i)); \
|
||||
if(((i+1)%16) == 0) printf("- "); \
|
||||
if(((i+1)%32) == 0) printf("\n"); \
|
||||
} \
|
||||
printf("\n\n"); \
|
||||
} |
@ -0,0 +1,808 @@ |
||||
/*
|
||||
* Custom OID/ioctl definitions for |
||||
* Broadcom 802.11abg Networking Device Driver |
||||
* |
||||
* Definitions subject to change without notice. |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#ifndef _wlioctl_h_ |
||||
#define _wlioctl_h_ |
||||
|
||||
#include <typedefs.h> |
||||
#include <proto/ethernet.h> |
||||
#include <proto/802.11.h> |
||||
|
||||
#if defined(__GNUC__) |
||||
#define PACKED __attribute__((packed)) |
||||
#else |
||||
#define PACKED |
||||
#endif |
||||
|
||||
#define WL_NUMRATES 255 /* max # of rates in a rateset */ |
||||
|
||||
typedef struct wl_rateset { |
||||
uint32 count; /* # rates in this set */ |
||||
uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ |
||||
} wl_rateset_t; |
||||
|
||||
#define WL_CHANSPEC_CHAN_MASK 0x0fff |
||||
#define WL_CHANSPEC_BAND_MASK 0xf000 |
||||
#define WL_CHANSPEC_BAND_SHIFT 12 |
||||
#define WL_CHANSPEC_BAND_A 0x1000 |
||||
#define WL_CHANSPEC_BAND_B 0x2000 |
||||
|
||||
/*
|
||||
* Per-bss information structure. |
||||
*/ |
||||
|
||||
#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */ |
||||
#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */ |
||||
|
||||
typedef struct wl_bss_info106 { |
||||
uint version; /* version field */ |
||||
struct ether_addr BSSID; |
||||
uint8 SSID_len; |
||||
uint8 SSID[32]; |
||||
uint8 Privacy; /* 0=No WEP, 1=Use WEP */ |
||||
int16 RSSI; /* receive signal strength (in dBm) */ |
||||
uint16 beacon_period; /* units are Kusec */ |
||||
uint16 atim_window; /* units are Kusec */ |
||||
uint8 channel; /* Channel no. */ |
||||
int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */ |
||||
struct { |
||||
uint count; /* # rates in this set */ |
||||
uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */ |
||||
} rateset; /* supported rates */ |
||||
uint8 dtim_period; /* DTIM period */ |
||||
int8 phy_noise; /* noise right after tx (in dBm) */ |
||||
uint16 capability; /* Capability information */ |
||||
struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */ |
||||
uint16 prb_len; /* probe response frame length (ioctl na) */ |
||||
struct { |
||||
uint8 supported; /* wpa supported */ |
||||
uint8 multicast; /* multicast cipher */ |
||||
uint8 ucount; /* count of unicast ciphers */ |
||||
uint8 unicast[4]; /* unicast ciphers */ |
||||
uint8 acount; /* count of auth modes */ |
||||
uint8 auth[4]; /* Authentication modes */ |
||||
} wpa; |
||||
} wl_bss_info106_t; |
||||
|
||||
typedef struct wl_bss_info { |
||||
uint32 version; /* version field */ |
||||
uint32 length; /* byte length of data in this record, starting at version and including IEs */ |
||||
struct ether_addr BSSID; |
||||
uint16 beacon_period; /* units are Kusec */ |
||||
uint16 capability; /* Capability information */ |
||||
uint8 SSID_len; |
||||
uint8 SSID[32]; |
||||
struct { |
||||
uint count; /* # rates in this set */ |
||||
uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ |
||||
} rateset; /* supported rates */ |
||||
uint8 channel; /* Channel no. */ |
||||
uint16 atim_window; /* units are Kusec */ |
||||
uint8 dtim_period; /* DTIM period */ |
||||
int16 RSSI; /* receive signal strength (in dBm) */ |
||||
int8 phy_noise; /* noise (in dBm) */ |
||||
uint32 ie_length; /* byte length of Information Elements */ |
||||
/* variable length Information Elements */ |
||||
} wl_bss_info_t; |
||||
|
||||
typedef struct wlc_ssid { |
||||
uint32 SSID_len; |
||||
uchar SSID[32]; |
||||
} wlc_ssid_t; |
||||
|
||||
typedef struct wl_scan_params { |
||||
wlc_ssid_t ssid; /* default is {0, ""} */ |
||||
struct ether_addr bssid;/* default is bcast */ |
||||
int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ |
||||
int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */ |
||||
int32 nprobes; /* -1 use default, number of probes per channel */ |
||||
int32 active_time; /* -1 use default, dwell time per channel for active scanning */ |
||||
int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */ |
||||
int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */ |
||||
int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */ |
||||
uint16 channel_list[1]; /* list of chanspecs */ |
||||
} wl_scan_params_t; |
||||
/* size of wl_scan_params not including variable length array */ |
||||
#define WL_SCAN_PARAMS_FIXED_SIZE 64 |
||||
|
||||
typedef struct wl_scan_results { |
||||
uint32 buflen; |
||||
uint32 version; |
||||
uint32 count; |
||||
wl_bss_info_t bss_info[1]; |
||||
} wl_scan_results_t; |
||||
/* size of wl_scan_results not including variable length array */ |
||||
#define WL_SCAN_RESULTS_FIXED_SIZE 12 |
||||
|
||||
/* uint32 list */ |
||||
typedef struct wl_uint32_list { |
||||
/* in - # of elements, out - # of entries */ |
||||
uint32 count; |
||||
/* variable length uint32 list */ |
||||
uint32 element[1]; |
||||
} wl_uint32_list_t; |
||||
|
||||
#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ |
||||
|
||||
typedef struct wl_channels_in_country { |
||||
uint32 buflen; |
||||
uint32 band; |
||||
char country_abbrev[WLC_CNTRY_BUF_SZ]; |
||||
uint32 count; |
||||
uint32 channel[1]; |
||||
} wl_channels_in_country_t; |
||||
|
||||
typedef struct wl_country_list { |
||||
uint32 buflen; |
||||
uint32 band_set; |
||||
uint32 band; |
||||
uint32 count; |
||||
char country_abbrev[1]; |
||||
} wl_country_list_t; |
||||
|
||||
#define WL_RM_TYPE_BASIC 1 |
||||
#define WL_RM_TYPE_CCA 2 |
||||
#define WL_RM_TYPE_RPI 3 |
||||
|
||||
#define WL_RM_FLAG_PARALLEL (1<<0) |
||||
|
||||
#define WL_RM_FLAG_LATE (1<<1) |
||||
#define WL_RM_FLAG_INCAPABLE (1<<2) |
||||
#define WL_RM_FLAG_REFUSED (1<<3) |
||||
|
||||
typedef struct wl_rm_req_elt { |
||||
int8 type; |
||||
int8 flags; |
||||
uint16 chanspec; |
||||
uint32 token; /* token for this measurement */ |
||||
uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ |
||||
uint32 tsf_l; /* TSF low 32-bits */ |
||||
uint32 dur; /* TUs */ |
||||
} wl_rm_req_elt_t; |
||||
|
||||
typedef struct wl_rm_req { |
||||
uint32 token; /* overall measurement set token */ |
||||
uint32 count; /* number of measurement reqests */ |
||||
wl_rm_req_elt_t req[1]; /* variable length block of requests */ |
||||
} wl_rm_req_t; |
||||
#define WL_RM_REQ_FIXED_LEN 8 |
||||
|
||||
typedef struct wl_rm_rep_elt { |
||||
int8 type; |
||||
int8 flags; |
||||
uint16 chanspec; |
||||
uint32 token; /* token for this measurement */ |
||||
uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ |
||||
uint32 tsf_l; /* TSF low 32-bits */ |
||||
uint32 dur; /* TUs */ |
||||
uint32 len; /* byte length of data block */ |
||||
uint8 data[1]; /* variable length data block */ |
||||
} wl_rm_rep_elt_t; |
||||
#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ |
||||
|
||||
#define WL_RPI_REP_BIN_NUM 8 |
||||
typedef struct wl_rm_rpi_rep { |
||||
uint8 rpi[WL_RPI_REP_BIN_NUM]; |
||||
int8 rpi_max[WL_RPI_REP_BIN_NUM]; |
||||
} wl_rm_rpi_rep_t; |
||||
|
||||
typedef struct wl_rm_rep { |
||||
uint32 token; /* overall measurement set token */ |
||||
uint32 len; /* length of measurement report block */ |
||||
wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ |
||||
} wl_rm_rep_t; |
||||
#define WL_RM_REP_FIXED_LEN 8 |
||||
|
||||
|
||||
#if defined(WPAPSK) |
||||
typedef enum sup_auth_status { |
||||
WLC_SUP_DISCONNECTED = 0, |
||||
WLC_SUP_CONNECTING, |
||||
WLC_SUP_IDREQUIRED, |
||||
WLC_SUP_AUTHENTICATING, |
||||
WLC_SUP_AUTHENTICATED, |
||||
WLC_SUP_KEYXCHANGE, |
||||
WLC_SUP_KEYED |
||||
} sup_auth_status_t; |
||||
#endif /* CCX | WPAPSK */ |
||||
|
||||
/* Enumerate crypto algorithms */ |
||||
#define CRYPTO_ALGO_OFF 0 |
||||
#define CRYPTO_ALGO_WEP1 1 |
||||
#define CRYPTO_ALGO_TKIP 2 |
||||
#define CRYPTO_ALGO_WEP128 3 |
||||
#define CRYPTO_ALGO_AES_CCM 4 |
||||
#define CRYPTO_ALGO_AES_OCB_MSDU 5 |
||||
#define CRYPTO_ALGO_AES_OCB_MPDU 6 |
||||
#define CRYPTO_ALGO_NALG 7 |
||||
|
||||
#define WSEC_GEN_MIC_ERROR 0x0001 |
||||
#define WSEC_GEN_REPLAY 0x0002 |
||||
|
||||
#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ |
||||
#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ |
||||
#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ |
||||
#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ |
||||
|
||||
typedef struct wl_wsec_key { |
||||
uint32 index; /* key index */ |
||||
uint32 len; /* key length */ |
||||
uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ |
||||
uint32 pad_1[18]; |
||||
uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ |
||||
uint32 flags; /* misc flags */ |
||||
uint32 pad_2[2]; |
||||
int pad_3; |
||||
int iv_initialized; /* has IV been initialized already? */
|
||||
int pad_4; |
||||
/* Rx IV */ |
||||
struct { |
||||
uint32 hi; /* upper 32 bits of IV */ |
||||
uint16 lo; /* lower 16 bits of IV */ |
||||
} rxiv; |
||||
uint32 pad_5[2]; |
||||
struct ether_addr ea; /* per station */ |
||||
} wl_wsec_key_t; |
||||
|
||||
|
||||
#define WSEC_MIN_PSK_LEN 8 |
||||
#define WSEC_MAX_PSK_LEN 64 |
||||
|
||||
/* Flag for key material needing passhash'ing */ |
||||
#define WSEC_PASSPHRASE (1<<0) |
||||
|
||||
/* recepticle for WLC_SET_WSEC_PMK parameter */ |
||||
typedef struct { |
||||
ushort key_len; /* octets in key material */ |
||||
ushort flags; /* key handling qualification */ |
||||
uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ |
||||
} wsec_pmk_t; |
||||
|
||||
/* wireless security bitvec */ |
||||
#define WEP_ENABLED 1 |
||||
#define TKIP_ENABLED 2 |
||||
#define AES_ENABLED 4 |
||||
#define WSEC_SWFLAG 8 |
||||
|
||||
#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG) |
||||
#define WSEC_HW(wsec) (!WSEC_SW(wsec)) |
||||
#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) |
||||
#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) |
||||
#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) |
||||
#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) |
||||
|
||||
typedef struct wl_led_info { |
||||
uint32 index; /* led index */ |
||||
uint32 behavior; |
||||
bool activehi; |
||||
} wl_led_info_t; |
||||
|
||||
/*
|
||||
* definitions for driver messages passed from WL to NAS. |
||||
*/ |
||||
/* Use this to recognize wpa and 802.1x driver messages. */ |
||||
static const uint8 wl_wpa_snap_template[] = |
||||
{ 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; |
||||
|
||||
#define WL_WPA_MSG_IFNAME_MAX 16 |
||||
|
||||
/* WPA driver message */ |
||||
typedef struct wl_wpa_header { |
||||
struct ether_header eth; |
||||
struct dot11_llc_snap_header snap; |
||||
uint8 version; |
||||
uint8 type; |
||||
/* version 2 additions */ |
||||
char ifname[WL_WPA_MSG_IFNAME_MAX]; |
||||
/* version specific data */ |
||||
/* uint8 data[1]; */ |
||||
} wl_wpa_header_t PACKED; |
||||
|
||||
#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) |
||||
|
||||
/* WPA driver message ethertype - private between wlc and nas */ |
||||
#define WL_WPA_ETHER_TYPE 0x9999 |
||||
|
||||
/* WPA driver message current version */ |
||||
#define WL_WPA_MSG_VERSION 2 |
||||
|
||||
/* Type field values for the 802.2 driver messages for WPA. */ |
||||
#define WLC_ASSOC_MSG 1 |
||||
#define WLC_DISASSOC_MSG 2 |
||||
#define WLC_PTK_MIC_MSG 3 |
||||
#define WLC_GTK_MIC_MSG 4 |
||||
|
||||
/* 802.1x driver message */ |
||||
typedef struct wl_eapol_header { |
||||
struct ether_header eth; |
||||
struct dot11_llc_snap_header snap; |
||||
uint8 version; |
||||
uint8 reserved; |
||||
char ifname[WL_WPA_MSG_IFNAME_MAX]; |
||||
/* version specific data */ |
||||
/* uint8 802_1x_msg[1]; */ |
||||
} wl_eapol_header_t PACKED; |
||||
|
||||
#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) |
||||
|
||||
/* 802.1x driver message ethertype - private between wlc and nas */ |
||||
#define WL_EAPOL_ETHER_TYPE 0x999A |
||||
|
||||
/* 802.1x driver message current version */ |
||||
#define WL_EAPOL_MSG_VERSION 1 |
||||
|
||||
/* srom read/write struct passed through ioctl */ |
||||
typedef struct { |
||||
uint byteoff; /* byte offset */ |
||||
uint nbytes; /* number of bytes */ |
||||
uint16 buf[1]; |
||||
} srom_rw_t; |
||||
|
||||
/* R_REG and W_REG struct passed through ioctl */ |
||||
typedef struct { |
||||
uint32 byteoff; /* byte offset of the field in d11regs_t */ |
||||
uint32 val; /* read/write value of the field */ |
||||
uint32 size; /* sizeof the field */ |
||||
} rw_reg_t; |
||||
|
||||
/* Structure used by GET/SET_ATTEN ioctls */ |
||||
typedef struct { |
||||
uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */ |
||||
uint16 bb; /* Baseband attenuation */ |
||||
uint16 radio; /* Radio attenuation */ |
||||
uint16 txctl1; /* Radio TX_CTL1 value */ |
||||
} atten_t; |
||||
|
||||
/* Used to get specific STA parameters */
|
||||
typedef struct { |
||||
uint32 val; |
||||
struct ether_addr ea; |
||||
} scb_val_t; |
||||
|
||||
/* Event data type */ |
||||
typedef struct { |
||||
uint msg; /* Message (see below) */ |
||||
struct ether_addr *addr; /* Station address (if applicable) */ |
||||
uint status; /* Status code (see below) */ |
||||
uint reason; /* Reason code (if applicable) */ |
||||
uint auth_type; /* WLC_E_AUTH */ |
||||
bool link; /* WLC_E_LINK */ |
||||
bool group; /* WLC_E_MIC_ERROR */ |
||||
bool flush_txq; /* WLC_E_MIC_ERROR */ |
||||
} wlc_event_t; |
||||
|
||||
typedef struct { |
||||
uint16 ver; /* version of this struct */ |
||||
uint16 cap; /* sta's advertized capabilities */ |
||||
uint32 flags; /* flags defined below */ |
||||
uint32 idle; /* time since data pkt rx'd from sta */ |
||||
struct ether_addr ea; /* Station address */ |
||||
wl_rateset_t rateset; /* rateset in use */ |
||||
} sta_info_t; |
||||
|
||||
#define WL_STA_INFO_LEN 300 |
||||
#define WL_STA_VER 1 |
||||
|
||||
/* flags fields */ |
||||
#define WL_STA_BRCM 0x01 |
||||
#define WL_STA_WME 0x02 |
||||
#define WL_STA_ABCAP 0x04 |
||||
#define WL_STA_AUTHE 0x08 |
||||
#define WL_STA_ASSOC 0x10 |
||||
#define WL_STA_AUTHO 0x20 |
||||
|
||||
/* Event messages */ |
||||
#define WLC_E_SET_SSID 1 |
||||
#define WLC_E_JOIN 2 |
||||
#define WLC_E_START 3 |
||||
#define WLC_E_AUTH 4 |
||||
#define WLC_E_AUTH_IND 5 |
||||
#define WLC_E_DEAUTH 6 |
||||
#define WLC_E_DEAUTH_IND 7 |
||||
#define WLC_E_ASSOC 8 |
||||
#define WLC_E_ASSOC_IND 9 |
||||
#define WLC_E_REASSOC 10 |
||||
#define WLC_E_REASSOC_IND 11 |
||||
#define WLC_E_DISASSOC 12 |
||||
#define WLC_E_DISASSOC_IND 13 |
||||
#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */ |
||||
#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */ |
||||
#define WLC_E_GOT_BEACONS 16 |
||||
#define WLC_E_LINK 17 /* Link indication */ |
||||
#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */ |
||||
#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */ |
||||
#define WLC_E_ROAM 20 |
||||
#define WLC_E_LAST 21 |
||||
|
||||
/* Event status codes */ |
||||
#define WLC_E_STATUS_SUCCESS 0 |
||||
#define WLC_E_STATUS_FAIL 1 |
||||
#define WLC_E_STATUS_TIMEOUT 2 |
||||
#define WLC_E_STATUS_NO_NETWORKS 3 |
||||
#define WLC_E_STATUS_ABORT 4 |
||||
|
||||
typedef struct wlc_event_cb { |
||||
uint msg; /* Event message or 0 for all */ |
||||
void (*fn)(void *, wlc_event_t *); /* Callback function */ |
||||
void *context; /* Passed to callback function */ |
||||
struct wlc_event_cb *next; /* Next in the chain */ |
||||
} wlc_event_cb_t; |
||||
|
||||
/*
|
||||
* Country locale determines which channels are available to us. |
||||
*/ |
||||
typedef enum _wlc_locale { |
||||
WLC_WW = 0, /* Worldwide */ |
||||
WLC_THA, /* Thailand */ |
||||
WLC_ISR, /* Israel */ |
||||
WLC_JDN, /* Jordan */ |
||||
WLC_PRC, /* China */ |
||||
WLC_JPN, /* Japan */ |
||||
WLC_FCC, /* USA */ |
||||
WLC_EUR, /* Europe */ |
||||
WLC_USL, /* US Low Band only */ |
||||
WLC_JPH, /* Japan High Band only */ |
||||
WLC_ALL, /* All the channels in this band */ |
||||
WLC_11D, /* Represents locale recieved by 11d beacons */ |
||||
WLC_LAST_LOCALE, |
||||
WLC_UNDEFINED_LOCALE = 0xf |
||||
} wlc_locale_t; |
||||
|
||||
/* channel encoding */ |
||||
typedef struct channel_info { |
||||
int hw_channel; |
||||
int target_channel; |
||||
int scan_channel; |
||||
} channel_info_t; |
||||
|
||||
/* For ioctls that take a list of MAC addresses */ |
||||
struct maclist { |
||||
uint count; /* number of MAC addresses */ |
||||
struct ether_addr ea[1]; /* variable length array of MAC addresses */ |
||||
}; |
||||
|
||||
/* get pkt count struct passed through ioctl */ |
||||
typedef struct get_pktcnt { |
||||
uint rx_good_pkt; |
||||
uint rx_bad_pkt; |
||||
uint tx_good_pkt; |
||||
uint tx_bad_pkt; |
||||
} get_pktcnt_t; |
||||
|
||||
/* Linux network driver ioctl encoding */ |
||||
typedef struct wl_ioctl { |
||||
uint cmd; /* common ioctl definition */ |
||||
void *buf; /* pointer to user buffer */ |
||||
uint len; /* length of user buffer */ |
||||
bool set; /* get or set request (optional) */ |
||||
uint used; /* bytes read or written (optional) */ |
||||
uint needed; /* bytes needed (optional) */ |
||||
} wl_ioctl_t; |
||||
|
||||
/*
|
||||
* Structure for passing hardware and software
|
||||
* revision info up from the driver.
|
||||
*/ |
||||
typedef struct wlc_rev_info { |
||||
uint vendorid; /* PCI vendor id */ |
||||
uint deviceid; /* device id of chip */ |
||||
uint radiorev; /* radio revision */ |
||||
uint chiprev; /* chip revision */ |
||||
uint corerev; /* core revision */ |
||||
uint boardid; /* board identifier (usu. PCI sub-device id) */ |
||||
uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ |
||||
uint boardrev; /* board revision */ |
||||
uint driverrev; /* driver version */ |
||||
uint ucoderev; /* microcode version */ |
||||
uint bus; /* bus type */ |
||||
uint chipnum; /* chip number */ |
||||
} wlc_rev_info_t; |
||||
|
||||
/* check this magic number */ |
||||
#define WLC_IOCTL_MAGIC 0x14e46c77 |
||||
|
||||
/* bump this number if you change the ioctl interface */ |
||||
#define WLC_IOCTL_VERSION 1 |
||||
|
||||
/* maximum length buffer required */ |
||||
#define WLC_IOCTL_MAXLEN 8192 |
||||
|
||||
/* common ioctl definitions */ |
||||
#define WLC_GET_MAGIC 0 |
||||
#define WLC_GET_VERSION 1 |
||||
#define WLC_UP 2 |
||||
#define WLC_DOWN 3 |
||||
#define WLC_DUMP 6 |
||||
#define WLC_GET_MSGLEVEL 7 |
||||
#define WLC_SET_MSGLEVEL 8 |
||||
#define WLC_GET_PROMISC 9 |
||||
#define WLC_SET_PROMISC 10 |
||||
#define WLC_GET_RATE 12 |
||||
#define WLC_SET_RATE 13 |
||||
#define WLC_GET_INSTANCE 14 |
||||
#define WLC_GET_FRAG 15 |
||||
#define WLC_SET_FRAG 16 |
||||
#define WLC_GET_RTS 17 |
||||
#define WLC_SET_RTS 18 |
||||
#define WLC_GET_INFRA 19 |
||||
#define WLC_SET_INFRA 20 |
||||
#define WLC_GET_AUTH 21 |
||||
#define WLC_SET_AUTH 22 |
||||
#define WLC_GET_BSSID 23 |
||||
#define WLC_SET_BSSID 24 |
||||
#define WLC_GET_SSID 25 |
||||
#define WLC_SET_SSID 26 |
||||
#define WLC_RESTART 27 |
||||
#define WLC_GET_CHANNEL 29 |
||||
#define WLC_SET_CHANNEL 30 |
||||
#define WLC_GET_SRL 31 |
||||
#define WLC_SET_SRL 32 |
||||
#define WLC_GET_LRL 33 |
||||
#define WLC_SET_LRL 34 |
||||
#define WLC_GET_PLCPHDR 35 |
||||
#define WLC_SET_PLCPHDR 36 |
||||
#define WLC_GET_RADIO 37 |
||||
#define WLC_SET_RADIO 38 |
||||
#define WLC_GET_PHYTYPE 39 |
||||
#define WLC_GET_WEP 42 |
||||
#define WLC_SET_WEP 43 |
||||
#define WLC_GET_KEY 44 |
||||
#define WLC_SET_KEY 45 |
||||
#define WLC_SCAN 50 |
||||
#define WLC_SCAN_RESULTS 51 |
||||
#define WLC_DISASSOC 52 |
||||
#define WLC_REASSOC 53 |
||||
#define WLC_GET_ROAM_TRIGGER 54 |
||||
#define WLC_SET_ROAM_TRIGGER 55 |
||||
#define WLC_GET_TXANT 61 |
||||
#define WLC_SET_TXANT 62 |
||||
#define WLC_GET_ANTDIV 63 |
||||
#define WLC_SET_ANTDIV 64 |
||||
#define WLC_GET_TXPWR 65 |
||||
#define WLC_SET_TXPWR 66 |
||||
#define WLC_GET_CLOSED 67 |
||||
#define WLC_SET_CLOSED 68 |
||||
#define WLC_GET_MACLIST 69 |
||||
#define WLC_SET_MACLIST 70 |
||||
#define WLC_GET_RATESET 71 |
||||
#define WLC_SET_RATESET 72 |
||||
#define WLC_GET_LOCALE 73 |
||||
#define WLC_SET_LOCALE 74 |
||||
#define WLC_GET_BCNPRD 75 |
||||
#define WLC_SET_BCNPRD 76 |
||||
#define WLC_GET_DTIMPRD 77 |
||||
#define WLC_SET_DTIMPRD 78 |
||||
#define WLC_GET_SROM 79 |
||||
#define WLC_SET_SROM 80 |
||||
#define WLC_GET_WEP_RESTRICT 81 |
||||
#define WLC_SET_WEP_RESTRICT 82 |
||||
#define WLC_GET_COUNTRY 83 |
||||
#define WLC_SET_COUNTRY 84 |
||||
#define WLC_GET_REVINFO 98 |
||||
#define WLC_GET_MACMODE 105 |
||||
#define WLC_SET_MACMODE 106 |
||||
#define WLC_GET_GMODE 109 |
||||
#define WLC_SET_GMODE 110 |
||||
#define WLC_GET_CURR_RATESET 114 /* current rateset */ |
||||
#define WLC_GET_SCANSUPPRESS 115 |
||||
#define WLC_SET_SCANSUPPRESS 116 |
||||
#define WLC_GET_AP 117 |
||||
#define WLC_SET_AP 118 |
||||
#define WLC_GET_EAP_RESTRICT 119 |
||||
#define WLC_SET_EAP_RESTRICT 120 |
||||
#define WLC_GET_WDSLIST 123 |
||||
#define WLC_SET_WDSLIST 124 |
||||
#define WLC_GET_RSSI 127 |
||||
#define WLC_GET_WSEC 133 |
||||
#define WLC_SET_WSEC 134 |
||||
#define WLC_GET_BSS_INFO 136 |
||||
#define WLC_GET_LAZYWDS 138 |
||||
#define WLC_SET_LAZYWDS 139 |
||||
#define WLC_GET_BANDLIST 140 |
||||
#define WLC_GET_BAND 141 |
||||
#define WLC_SET_BAND 142 |
||||
#define WLC_GET_SHORTSLOT 144 |
||||
#define WLC_GET_SHORTSLOT_OVERRIDE 145 |
||||
#define WLC_SET_SHORTSLOT_OVERRIDE 146 |
||||
#define WLC_GET_SHORTSLOT_RESTRICT 147 |
||||
#define WLC_SET_SHORTSLOT_RESTRICT 148 |
||||
#define WLC_GET_GMODE_PROTECTION 149 |
||||
#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 |
||||
#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 |
||||
#define WLC_UPGRADE 152 |
||||
#define WLC_GET_MRATE 153 |
||||
#define WLC_SET_MRATE 154 |
||||
#define WLC_GET_ASSOCLIST 159 |
||||
#define WLC_GET_CLK 160 |
||||
#define WLC_SET_CLK 161 |
||||
#define WLC_GET_UP 162 |
||||
#define WLC_OUT 163 |
||||
#define WLC_GET_WPA_AUTH 164 |
||||
#define WLC_SET_WPA_AUTH 165 |
||||
#define WLC_GET_GMODE_PROTECTION_CONTROL 178 |
||||
#define WLC_SET_GMODE_PROTECTION_CONTROL 179 |
||||
#define WLC_GET_PHYLIST 180 |
||||
#define WLC_GET_KEY_SEQ 183 |
||||
#define WLC_GET_GMODE_PROTECTION_CTS 198 |
||||
#define WLC_SET_GMODE_PROTECTION_CTS 199 |
||||
#define WLC_GET_PIOMODE 203 |
||||
#define WLC_SET_PIOMODE 204 |
||||
#define WLC_SET_LED 209 |
||||
#define WLC_GET_LED 210 |
||||
#define WLC_GET_CHANNEL_SEL 215 |
||||
#define WLC_START_CHANNEL_SEL 216 |
||||
#define WLC_GET_VALID_CHANNELS 217 |
||||
#define WLC_GET_FAKEFRAG 218 |
||||
#define WLC_SET_FAKEFRAG 219 |
||||
#define WLC_GET_WET 230 |
||||
#define WLC_SET_WET 231 |
||||
#define WLC_GET_KEY_PRIMARY 235 |
||||
#define WLC_SET_KEY_PRIMARY 236 |
||||
#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */ |
||||
#define WLC_SET_CS_SCAN_TIMER 248 |
||||
#define WLC_GET_CS_SCAN_TIMER 249 |
||||
#define WLC_CURRENT_PWR 256 |
||||
#define WLC_GET_CHANNELS_IN_COUNTRY 260 |
||||
#define WLC_GET_COUNTRY_LIST 261 |
||||
#define WLC_GET_VAR 262 /* get value of named variable */ |
||||
#define WLC_SET_VAR 263 /* set named variable to value */ |
||||
#define WLC_NVRAM_GET 264 |
||||
#define WLC_NVRAM_SET 265 |
||||
#define WLC_SET_WSEC_PMK 268 |
||||
#define WLC_GET_AUTH_MODE 269 |
||||
#define WLC_SET_AUTH_MODE 270 |
||||
#define WLC_LAST 273 /* do not change - use get_var/set_var */ |
||||
|
||||
/*
|
||||
* Minor kludge alert: |
||||
* Duplicate a few definitions that irelay requires from epiioctl.h here |
||||
* so caller doesn't have to include this file and epiioctl.h . |
||||
* If this grows any more, it would be time to move these irelay-specific |
||||
* definitions out of the epiioctl.h and into a separate driver common file. |
||||
*/ |
||||
#ifndef EPICTRL_COOKIE |
||||
#define EPICTRL_COOKIE 0xABADCEDE |
||||
#endif |
||||
|
||||
/* vx wlc ioctl's offset */ |
||||
#define CMN_IOCTL_OFF 0x180 |
||||
|
||||
/*
|
||||
* custom OID support |
||||
* |
||||
* 0xFF - implementation specific OID |
||||
* 0xE4 - first byte of Broadcom PCI vendor ID |
||||
* 0x14 - second byte of Broadcom PCI vendor ID |
||||
* 0xXX - the custom OID number |
||||
*/ |
||||
|
||||
/* begin 0x1f values beyond the start of the ET driver range. */ |
||||
#define WL_OID_BASE 0xFFE41420 |
||||
|
||||
/* NDIS overrides */ |
||||
#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) |
||||
|
||||
#define WL_DECRYPT_STATUS_SUCCESS 1 |
||||
#define WL_DECRYPT_STATUS_FAILURE 2 |
||||
#define WL_DECRYPT_STATUS_UNKNOWN 3 |
||||
|
||||
/* allows user-mode app to poll the status of USB image upgrade */ |
||||
#define WLC_UPGRADE_SUCCESS 0 |
||||
#define WLC_UPGRADE_PENDING 1 |
||||
|
||||
/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ |
||||
#define WL_RADIO_SW_DISABLE (1<<0) |
||||
#define WL_RADIO_HW_DISABLE (1<<1) |
||||
|
||||
/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ |
||||
#define WL_TXPWR_OVERRIDE (1<<31) |
||||
|
||||
|
||||
/* Bus types */ |
||||
#define WL_SB_BUS 0 /* Silicon Backplane */ |
||||
#define WL_PCI_BUS 1 /* PCI target */ |
||||
#define WL_PCMCIA_BUS 2 /* PCMCIA target */ |
||||
|
||||
/* band types */ |
||||
#define WLC_BAND_AUTO 0 /* auto-select */ |
||||
#define WLC_BAND_A 1 /* "a" band (5 Ghz) */ |
||||
#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */ |
||||
|
||||
/* MAC list modes */ |
||||
#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ |
||||
#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ |
||||
#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ |
||||
|
||||
/*
|
||||
* |
||||
*/ |
||||
#define GMODE_LEGACY_B 0 |
||||
#define GMODE_AUTO 1 |
||||
#define GMODE_ONLY 2 |
||||
#define GMODE_B_DEFERRED 3 |
||||
#define GMODE_PERFORMANCE 4 |
||||
#define GMODE_LRS 5 |
||||
#define GMODE_MAX 6 |
||||
|
||||
/* values for PLCPHdr_override */ |
||||
#define WLC_PLCP_AUTO -1 |
||||
#define WLC_PLCP_SHORT 0 |
||||
#define WLC_PLCP_LONG 1 |
||||
|
||||
/* values for g_protection_override */ |
||||
#define WLC_G_PROTECTION_AUTO -1 |
||||
#define WLC_G_PROTECTION_OFF 0 |
||||
#define WLC_G_PROTECTION_ON 1 |
||||
|
||||
/* values for g_protection_control */ |
||||
#define WLC_G_PROTECTION_CTL_OFF 0 |
||||
#define WLC_G_PROTECTION_CTL_LOCAL 1 |
||||
#define WLC_G_PROTECTION_CTL_OVERLAP 2 |
||||
|
||||
/* Values for PM */ |
||||
#define PM_OFF 0 |
||||
#define PM_MAX 1 |
||||
#define PM_FAST 2 |
||||
|
||||
|
||||
|
||||
|
||||
|
||||
/* 802.11h enforcement levels */ |
||||
#define SPECT_MNGMT_OFF 0 /* 11h disabled */ |
||||
#define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */ |
||||
/* when 11h is enabled */ |
||||
#define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */ |
||||
|
||||
|
||||
|
||||
/* max # of leds supported by GPIO (gpio pin# == led index#) */ |
||||
#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ |
||||
|
||||
/* led per-pin behaviors */ |
||||
#define WL_LED_OFF 0 /* always off */ |
||||
#define WL_LED_ON 1 /* always on */ |
||||
#define WL_LED_ACTIVITY 2 /* activity */ |
||||
#define WL_LED_RADIO 3 /* radio enabled */ |
||||
#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ |
||||
#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ |
||||
#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ |
||||
#define WL_LED_WI1 7 |
||||
#define WL_LED_WI2 8 |
||||
#define WL_LED_WI3 9 |
||||
#define WL_LED_ASSOC 10 /* associated state indicator */ |
||||
#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ |
||||
#define WL_LED_NUMBEHAVIOR 12 |
||||
|
||||
/* led behavior numeric value format */ |
||||
#define WL_LED_BEH_MASK 0x7f /* behavior mask */ |
||||
#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ |
||||
|
||||
|
||||
/* WDS link local endpoint WPA role */ |
||||
#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ |
||||
#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ |
||||
#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ |
||||
|
||||
/* afterburner_override */ |
||||
#define ABO_AUTO -1 /* auto - no override */ |
||||
#define ABO_OFF 0 /* force afterburner off */ |
||||
#define ABO_ON 1 /* force afterburner on */ |
||||
|
||||
#undef PACKED |
||||
|
||||
#endif /* _wlioctl_h_ */ |
@ -0,0 +1,59 @@ |
||||
/*
|
||||
* Broadcom wireless network adapter utility functions |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#ifndef _wlutils_h_ |
||||
#define _wlutils_h_ |
||||
|
||||
#include <typedefs.h> |
||||
#include <wlioctl.h> |
||||
|
||||
/*
|
||||
* Pass a wlioctl request to the specified interface. |
||||
* @param name interface name |
||||
* @param cmd WLC_GET_MAGIC <= cmd < WLC_LAST |
||||
* @param buf buffer for passing in and/or receiving data |
||||
* @param len length of buf |
||||
* @return >= 0 if successful or < 0 otherwise |
||||
*/ |
||||
extern int wl_ioctl(char *name, int cmd, void *buf, int len); |
||||
|
||||
/*
|
||||
* Get the MAC (hardware) address of the specified interface. |
||||
* @param name interface name |
||||
* @param hwaddr 6-byte buffer for receiving address |
||||
* @return >= 0 if successful or < 0 otherwise |
||||
*/ |
||||
extern int wl_hwaddr(char *name, unsigned char *hwaddr); |
||||
|
||||
/*
|
||||
* Probe the specified interface. |
||||
* @param name interface name |
||||
* @return >= 0 if a Broadcom wireless device or < 0 otherwise |
||||
*/ |
||||
extern int wl_probe(char *name); |
||||
|
||||
/*
|
||||
* Set/Get named variable. |
||||
* @param name interface name |
||||
* @param var variable name |
||||
* @param val variable value/buffer |
||||
* @param len variable value/buffer length |
||||
* @return success == 0, failure != 0 |
||||
*/ |
||||
extern int wl_set_val(char *name, char *var, void *val, int len); |
||||
extern int wl_get_val(char *name, char *var, void *val, int len); |
||||
extern int wl_set_int(char *name, char *var, int val); |
||||
extern int wl_get_int(char *name, char *var, int *val); |
||||
|
||||
#endif /* _wlutils_h_ */ |
@ -0,0 +1,54 @@ |
||||
#
|
||||
# Linux router shared code Makefile
|
||||
#
|
||||
# Copyright 2001-2003, Broadcom Corporation
|
||||
# All Rights Reserved.
|
||||
#
|
||||
# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
|
||||
# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
|
||||
# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||
# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
|
||||
#
|
||||
# $Id$
|
||||
include $(TOPDIR)/rules.mk |
||||
|
||||
PKG_NAME:=libnvram
|
||||
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
|
||||
|
||||
EXTRA_CFLAGS := -c -I. -I../include
|
||||
|
||||
all: compile |
||||
|
||||
define OBJ_template |
||||
$(PKG_BUILD_DIR)/$(1): $(PKG_BUILD_DIR) |
||||
$(TARGET_CC) $(TARGET_CFLAGS) $(EXTRA_CFLAGS) -o $$@ $$(patsubst %.o,%.c,$(1))
|
||||
endef |
||||
|
||||
OBJS := nvram_linux.o nvram_convert.o main.o
|
||||
LIBNVRAM_OBJS:= $(PKG_BUILD_DIR)/nvram_linux.o $(PKG_BUILD_DIR)/nvram_convert.o
|
||||
$(foreach obj,$(OBJS),$(eval $(call OBJ_template,$(obj)))) |
||||
|
||||
$(PKG_BUILD_DIR): |
||||
mkdir -p $(PKG_BUILD_DIR)
|
||||
|
||||
$(PKG_BUILD_DIR)/nvram: $(PKG_BUILD_DIR)/main.o |
||||
$(TARGET_CC) $(TARGET_CFLAGS) -o $@ $^ -L$(PKG_BUILD_DIR) -lnvram
|
||||
|
||||
$(PKG_BUILD_DIR)/libnvram.so: $(LIBNVRAM_OBJS) |
||||
$(TARGET_CC) -shared -o $@ $^
|
||||
|
||||
$(TARGET_DIR)/usr/lib/libnvram.so: $(PKG_BUILD_DIR)/libnvram.so |
||||
install -m 644 $< $@
|
||||
install -m 644 $< $(STAGING_DIR)/lib/libnvram.so
|
||||
$(STRIP) $@
|
||||
|
||||
$(TARGET_DIR)/usr/sbin/nvram: $(PKG_BUILD_DIR)/nvram |
||||
mkdir -p $(TARGET_DIR)/usr/sbin
|
||||
install -m 644 $< $@
|
||||
$(STRIP) $@
|
||||
|
||||
compile: $(PKG_BUILD_DIR)/libnvram.so $(PKG_BUILD_DIR)/nvram |
||||
install: $(TARGET_DIR)/usr/lib/libnvram.so $(TARGET_DIR)/usr/sbin/nvram |
||||
|
||||
clean: |
||||
rm -rf $(PKG_BUILD_DIR)
|
@ -0,0 +1,78 @@ |
||||
/*
|
||||
* Frontend command-line utility for Linux NVRAM layer |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#include <stdio.h> |
||||
#include <stdlib.h> |
||||
#include <string.h> |
||||
|
||||
#include <typedefs.h> |
||||
#include <bcmnvram.h> |
||||
|
||||
static void |
||||
usage(void) |
||||
{ |
||||
fprintf(stderr, "usage: nvram [get name] [set name=value] [unset name] [show]\n"); |
||||
exit(0); |
||||
} |
||||
|
||||
/* NVRAM utility */ |
||||
int |
||||
main(int argc, char **argv) |
||||
{ |
||||
char *name, *value, buf[NVRAM_SPACE]; |
||||
int size; |
||||
|
||||
/* Skip program name */ |
||||
--argc; |
||||
++argv; |
||||
|
||||
if (!*argv)
|
||||
usage(); |
||||
|
||||
/* Process the remaining arguments. */ |
||||
for (; *argv; argv++) { |
||||
if (!strncmp(*argv, "get", 3)) { |
||||
if (*++argv) { |
||||
if ((value = nvram_get(*argv))) |
||||
puts(value); |
||||
} |
||||
} |
||||
else if (!strncmp(*argv, "set", 3)) { |
||||
if (*++argv) { |
||||
strncpy(value = buf, *argv, sizeof(buf)); |
||||
name = strsep(&value, "="); |
||||
nvram_set(name, value); |
||||
} |
||||
} |
||||
else if (!strncmp(*argv, "unset", 5)) { |
||||
if (*++argv) |
||||
nvram_unset(*argv); |
||||
} |
||||
else if (!strncmp(*argv, "commit", 5)) { |
||||
nvram_commit(); |
||||
} |
||||
else if (!strncmp(*argv, "show", 4) || |
||||
!strncmp(*argv, "getall", 6)) { |
||||
nvram_getall(buf, sizeof(buf)); |
||||
for (name = buf; *name; name += strlen(name) + 1) |
||||
puts(name); |
||||
size = sizeof(struct nvram_header) + (int) name - (int) buf; |
||||
fprintf(stderr, "size: %d bytes (%d left)\n", size, NVRAM_SPACE - size); |
||||
} |
||||
if (!*argv) |
||||
break; |
||||
} |
||||
|
||||
return 0; |
||||
}
|
@ -0,0 +1,77 @@ |
||||
|
||||
#define WL(a) "wl_"a |
||||
#define WL0(a) "wl0_"a |
||||
#define D11G(a) "d11g_"a |
||||
|
||||
#define PPP(a) "ppp_"a |
||||
#define PPPOE(a) "pppoe_"a |
||||
|
||||
struct nvram_convert { |
||||
char *name; // for WEB
|
||||
char *wl0_name; // for driver
|
||||
char *d11g_name; // for old nv name
|
||||
}; |
||||
|
||||
struct nvram_convert nvram_converts[] = { |
||||
// Bellow change from 3.11.48.7
|
||||
{ WL("ssid"), WL0("ssid"), ""}, |
||||
{ WL("radio"), WL0("mode"), ""}, |
||||
{ WL("mode"), WL0("mode"), ""}, |
||||
{ WL("wds"), WL0("wds"), ""}, |
||||
{ WL("auth"), WL0("auth"), ""}, |
||||
{ WL("key"), WL0("key"), ""}, |
||||
{ WL("key1"), WL0("key1"), ""}, |
||||
{ WL("key2"), WL0("key2"), ""}, |
||||
{ WL("key3"), WL0("key3"), ""}, |
||||
{ WL("key4"), WL0("key4"), ""}, |
||||
{ WL("maclist"), WL0("maclist"), ""}, |
||||
{ WL("channel"), WL0("channel"), D11G("channel")}, |
||||
{ WL("rateset"), WL0("rateset"), D11G("rateset")}, |
||||
{ WL("rts"), WL0("rts"), D11G("rts")}, |
||||
{ WL("bcn"), WL0("bcn"), D11G("bcn")}, |
||||
{ WL("gmode"), WL0("gmode"), "d11g_mode"}, |
||||
{ WL("unit"), WL0("unit"), ""}, |
||||
{ WL("ifname"), WL0("ifname"), ""}, |
||||
{ WL("phytype"), WL0("phytype"), ""}, |
||||
{ WL("country"), WL0("country"), ""}, |
||||
{ WL("closed"), WL0("closed"), ""}, |
||||
{ WL("lazywds"), WL0("lazywds"), ""}, |
||||
{ WL("wep"), WL0("wep"), ""}, |
||||
{ WL("macmode"), WL0("macmode"), ""}, |
||||
{ WL("rate"), WL0("rate"), D11G("rate")}, |
||||
{ WL("frag"), WL0("frag"), D11G("frag")}, |
||||
{ WL("dtim"), WL0("dtim"), D11G("dtim")}, |
||||
{ WL("plcphdr"), WL0("plcphdr"), ""}, |
||||
{ WL("gmode_protection"), WL0("gmode_protection"), ""}, |
||||
{ WL("radio"), WL0("radio"), ""}, |
||||
// Bellow change from 3.21.9.0
|
||||
{ WL("auth_mode"), WL0("auth_mode"), ""}, |
||||
{ WL("radius_ipaddr"), WL0("radius_ipaddr"), ""}, |
||||
{ WL("radius_port"), WL0("radius_port"), ""}, |
||||
{ WL("radius_key"), WL0("radius_key"), ""}, |
||||
{ WL("wpa_psk"), WL0("wpa_psk"), ""}, |
||||
{ WL("wpa_gtk_rekey"), WL0("wpa_gtk_rekey"), ""}, |
||||
{ WL("frameburst"), WL0("frameburst"), ""}, |
||||
{ WL("crypto"), WL0("crypto"), ""}, |
||||
{ WL("ap_isolate"), WL0("ap_isolate"), ""}, |
||||
{ WL("afterburner"), WL0("afterburner"), ""}, |
||||
// for PPPoE
|
||||
{ PPP("username"), PPPOE("username"), ""}, |
||||
{ PPP("passwd"), PPPOE("passwd"), ""}, |
||||
{ PPP("idletime"), PPPOE("idletime"), ""}, |
||||
{ PPP("keepalive"), PPPOE("keepalive"), ""}, |
||||
{ PPP("demand"), PPPOE("demand"), ""}, |
||||
{ PPP("service"), PPPOE("service"), ""}, |
||||
{ PPP("ac"), PPPOE("ac"), ""}, |
||||
{ PPP("static"), PPPOE("static"), ""}, |
||||
{ PPP("static_ip"), PPPOE("static_ip"), ""}, |
||||
{ PPP("username_1"), PPPOE("username_1"), ""}, |
||||
{ PPP("passwd_1"), PPPOE("passwd_1"), ""}, |
||||
{ PPP("idletime_1"), PPPOE("idletime_1"), ""}, |
||||
{ PPP("keepalive_1"), PPPOE("keepalive_1"), ""}, |
||||
{ PPP("demand_1"), PPPOE("demand_1"), ""}, |
||||
{ PPP("service_1"), PPPOE("service_1"), ""}, |
||||
{ PPP("ac_1"), PPPOE("ac_1"), ""}, |
||||
|
||||
{ 0, 0, 0}, |
||||
}; |
@ -0,0 +1,7 @@ |
||||
|
||||
struct nvram_convert { |
||||
char *name; |
||||
char *wl0_name; |
||||
char *d11g_name; |
||||
}; |
||||
|
@ -0,0 +1,320 @@ |
||||
/*
|
||||
* NVRAM variable manipulation (Linux user mode half) |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#include <stdio.h> |
||||
#include <stdlib.h> |
||||
#include <unistd.h> |
||||
#include <errno.h> |
||||
#include <error.h> |
||||
#include <string.h> |
||||
#include <sys/ioctl.h> |
||||
#include <sys/types.h> |
||||
#include <sys/stat.h> |
||||
#include <fcntl.h> |
||||
#include <sys/mman.h> |
||||
|
||||
#include <typedefs.h> |
||||
#include <bcmnvram.h> |
||||
#include <nvram_convert.h> |
||||
#include <shutils.h> |
||||
#include <utils.h> |
||||
|
||||
#define PATH_DEV_NVRAM "/dev/nvram" |
||||
|
||||
/* Globals */ |
||||
static int nvram_fd = -1; |
||||
static char *nvram_buf = NULL; |
||||
int check_action(void); |
||||
int file_to_buf(char *path, char *buf, int len); |
||||
|
||||
int |
||||
nvram_init(void *unused) |
||||
{ |
||||
if ((nvram_fd = open(PATH_DEV_NVRAM, O_RDWR)) < 0) |
||||
goto err; |
||||
|
||||
/* Map kernel string buffer into user space */ |
||||
if ((nvram_buf = mmap(NULL, NVRAM_SPACE, PROT_READ, MAP_SHARED, nvram_fd, 0)) == MAP_FAILED) { |
||||
close(nvram_fd); |
||||
nvram_fd = -1; |
||||
goto err; |
||||
} |
||||
|
||||
return 0; |
||||
|
||||
err: |
||||
perror(PATH_DEV_NVRAM); |
||||
return errno; |
||||
} |
||||
|
||||
char * |
||||
nvram_get(const char *name) |
||||
{ |
||||
size_t count = strlen(name) + 1; |
||||
char tmp[100], *value; |
||||
unsigned long *off = (unsigned long *) tmp; |
||||
|
||||
if (nvram_fd < 0) |
||||
if (nvram_init(NULL)) |
||||
return NULL; |
||||
|
||||
if (count > sizeof(tmp)) { |
||||
if (!(off = malloc(count))) |
||||
return NULL; |
||||
} |
||||
|
||||
/* Get offset into mmap() space */ |
||||
strcpy((char *) off, name); |
||||
|
||||
count = read(nvram_fd, off, count); |
||||
|
||||
if (count == sizeof(unsigned long)) |
||||
value = &nvram_buf[*off]; |
||||
else |
||||
value = NULL; |
||||
|
||||
if (count < 0) |
||||
perror(PATH_DEV_NVRAM); |
||||
|
||||
if (off != (unsigned long *) tmp) |
||||
free(off); |
||||
|
||||
return value; |
||||
} |
||||
|
||||
int |
||||
nvram_getall(char *buf, int count) |
||||
{ |
||||
int ret; |
||||
|
||||
if (nvram_fd < 0) |
||||
if ((ret = nvram_init(NULL))) |
||||
return ret; |
||||
|
||||
if (count == 0) |
||||
return 0; |
||||
|
||||
/* Get all variables */ |
||||
*buf = '\0'; |
||||
|
||||
ret = read(nvram_fd, buf, count); |
||||
|
||||
if (ret < 0) |
||||
perror(PATH_DEV_NVRAM); |
||||
|
||||
return (ret == count) ? 0 : ret; |
||||
} |
||||
|
||||
static int |
||||
_nvram_set(const char *name, const char *value) |
||||
{ |
||||
size_t count = strlen(name) + 1; |
||||
char tmp[100], *buf = tmp; |
||||
int ret; |
||||
|
||||
if (nvram_fd < 0) |
||||
if ((ret = nvram_init(NULL))) |
||||
return ret; |
||||
|
||||
/* Unset if value is NULL */ |
||||
if (value) |
||||
count += strlen(value) + 1; |
||||
|
||||
if (count > sizeof(tmp)) { |
||||
if (!(buf = malloc(count))) |
||||
return -ENOMEM; |
||||
} |
||||
|
||||
if (value) |
||||
sprintf(buf, "%s=%s", name, value); |
||||
else |
||||
strcpy(buf, name); |
||||
|
||||
ret = write(nvram_fd, buf, count); |
||||
|
||||
if (ret < 0) |
||||
perror(PATH_DEV_NVRAM); |
||||
|
||||
if (buf != tmp) |
||||
free(buf); |
||||
|
||||
return (ret == count) ? 0 : ret; |
||||
} |
||||
|
||||
int |
||||
nvram_set(const char *name, const char *value) |
||||
{ |
||||
extern struct nvram_convert nvram_converts[]; |
||||
struct nvram_convert *v; |
||||
int ret; |
||||
|
||||
ret = _nvram_set(name, value); |
||||
|
||||
for(v = nvram_converts ; v->name ; v++) { |
||||
if(!strcmp(v->name, name)){ |
||||
if(strcmp(v->wl0_name,"")) _nvram_set(v->wl0_name, value); |
||||
if(strcmp(v->d11g_name,"")) _nvram_set(v->d11g_name, value); |
||||
} |
||||
} |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
int |
||||
nvram_unset(const char *name) |
||||
{ |
||||
return _nvram_set(name, NULL); |
||||
} |
||||
|
||||
int |
||||
nvram_commit(void) |
||||
{ |
||||
int ret; |
||||
|
||||
cprintf("nvram_commit(): start\n");
|
||||
|
||||
if((check_action() == ACT_IDLE) ||
|
||||
(check_action() == ACT_SW_RESTORE) ||
|
||||
(check_action() == ACT_HW_RESTORE)){ |
||||
if (nvram_fd < 0) |
||||
if ((ret = nvram_init(NULL))) |
||||
return ret; |
||||
|
||||
ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL); |
||||
|
||||
if (ret < 0) |
||||
perror(PATH_DEV_NVRAM); |
||||
|
||||
cprintf("nvram_commit(): end\n");
|
||||
} |
||||
else |
||||
cprintf("nvram_commit(): nothing to do...\n"); |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
int file2nvram(char *filename, char *varname) { |
||||
FILE *fp; |
||||
int c,count; |
||||
int i=0,j=0; |
||||
char mem[10000],buf[30000]; |
||||
|
||||
if ( !(fp=fopen(filename,"rb") )) |
||||
return 0; |
||||
|
||||
count=fread(mem,1,sizeof(mem),fp); |
||||
fclose(fp); |
||||
for (j=0;j<count;j++) { |
||||
if (i > sizeof(buf)-3 ) |
||||
break; |
||||
c=mem[j]; |
||||
if (c >= 32 && c <= 126 && c != '\\' && c != '~') { |
||||
buf[i++]=(unsigned char) c; |
||||
} else if (c==0) { |
||||
buf[i++]='~'; |
||||
} else { |
||||
buf[i++]='\\'; |
||||
sprintf(buf+i,"%02X",c); |
||||
i+=2; |
||||
} |
||||
} |
||||
if (i==0) return 0; |
||||
buf[i]=0; |
||||
//fprintf(stderr,"================ > file2nvram %s = [%s] \n",varname,buf);
|
||||
nvram_set(varname,buf); |
||||
//nvram_commit(); //Barry adds for test
|
||||
} |
||||
|
||||
int nvram2file(char *varname, char *filename) { |
||||
FILE *fp; |
||||
int c,tmp; |
||||
int i=0,j=0; |
||||
char *buf; |
||||
char mem[10000]; |
||||
|
||||
if ( !(fp=fopen(filename,"wb") )) |
||||
return 0; |
||||
|
||||
buf=strdup(nvram_safe_get(varname)); |
||||
//fprintf(stderr,"=================> nvram2file %s = [%s] \n",varname,buf);
|
||||
while ( buf[i] && j < sizeof(mem)-3 ) { |
||||
if (buf[i] == '\\') { |
||||
i++; |
||||
tmp=buf[i+2]; |
||||
buf[i+2]=0; |
||||
sscanf(buf+i,"%02X",&c); |
||||
buf[i+2]=tmp; |
||||
i+=2; |
||||
mem[j]=c;j++; |
||||
} else if (buf[i] == '~') { |
||||
mem[j]=0;j++; |
||||
i++; |
||||
} else { |
||||
mem[j]=buf[i];j++; |
||||
i++; |
||||
}
|
||||
} |
||||
if (j<=0) return j; |
||||
j=fwrite(mem,1,j,fp); |
||||
fclose(fp); |
||||
free(buf); |
||||
return j; |
||||
}
|
||||
|
||||
int |
||||
check_action(void) |
||||
{ |
||||
char buf[80] = ""; |
||||
|
||||
if(file_to_buf(ACTION_FILE, buf, sizeof(buf))){ |
||||
if(!strcmp(buf, "ACT_TFTP_UPGRADE")){ |
||||
cprintf("Upgrading from tftp now, quiet exit....\n"); |
||||
return ACT_TFTP_UPGRADE; |
||||
} |
||||
else if(!strcmp(buf, "ACT_WEBS_UPGRADE")){ |
||||
cprintf("Upgrading from web (https) now, quiet exit....\n"); |
||||
return ACT_WEBS_UPGRADE; |
||||
} |
||||
else if(!strcmp(buf, "ACT_WEB_UPGRADE")){ |
||||
cprintf("Upgrading from web (http) now, quiet exit....\n"); |
||||
return ACT_WEB_UPGRADE; |
||||
} |
||||
else if(!strcmp(buf, "ACT_SW_RESTORE")){ |
||||
cprintf("Receive restore command from web, quiet exit....\n"); |
||||
return ACT_SW_RESTORE; |
||||
} |
||||
else if(!strcmp(buf, "ACT_HW_RESTORE")){ |
||||
cprintf("Receive restore commond from resetbutton, quiet exit....\n"); |
||||
return ACT_HW_RESTORE; |
||||
} |
||||
} |
||||
//fprintf(stderr, "Waiting for upgrading....\n");
|
||||
return ACT_IDLE; |
||||
} |
||||
|
||||
int |
||||
file_to_buf(char *path, char *buf, int len) |
||||
{ |
||||
FILE *fp; |
||||
|
||||
memset(buf, 0 , len); |
||||
|
||||
if ((fp = fopen(path, "r"))) { |
||||
fgets(buf, len, fp); |
||||
fclose(fp); |
||||
return 1; |
||||
} |
||||
|
||||
return 0; |
||||
} |
@ -0,0 +1,48 @@ |
||||
#
|
||||
# Linux router shared code Makefile
|
||||
#
|
||||
# Copyright 2001-2003, Broadcom Corporation
|
||||
# All Rights Reserved.
|
||||
#
|
||||
# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
|
||||
# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
|
||||
# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||
# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
|
||||
#
|
||||
# $Id$
|
||||
include $(TOPDIR)/rules.mk |
||||
|
||||
PKG_NAME:=libshared
|
||||
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
|
||||
|
||||
EXTRA_CFLAGS := -c -I. -I../include
|
||||
|
||||
all: compile |
||||
|
||||
LIBSHARED_OBJS:=
|
||||
define OBJ_template |
||||
$(PKG_BUILD_DIR)/$(1): $(PKG_BUILD_DIR) |
||||
$(TARGET_CC) $(TARGET_CFLAGS) $(EXTRA_CFLAGS) -o $$@ $$(patsubst %.o,%.c,$(1))
|
||||
LIBSHARED_OBJS += $(PKG_BUILD_DIR)/$(1)
|
||||
endef |
||||
|
||||
OBJS := shutils.o wl.o wl_linux.o defaults.o linux_timer.o
|
||||
$(foreach obj,$(OBJS),$(eval $(call OBJ_template,$(obj)))) |
||||
|
||||
|
||||
$(PKG_BUILD_DIR): |
||||
mkdir -p $(PKG_BUILD_DIR)
|
||||
|
||||
$(PKG_BUILD_DIR)/libshared.so: $(LIBSHARED_OBJS) |
||||
$(TARGET_CC) -shared -o $@ $^
|
||||
|
||||
$(TARGET_DIR)/usr/lib/libshared.so: $(PKG_BUILD_DIR)/libshared.so |
||||
install -m 644 $^ $@
|
||||
install -m 644 $^ $(STAGING_DIR)/lib/libshared.so
|
||||
$(STRIP) $@
|
||||
|
||||
compile: $(PKG_BUILD_DIR)/libshared.so |
||||
install: $(TARGET_DIR)/usr/lib/libshared.so |
||||
|
||||
clean: |
||||
rm -rf $(PKG_BUILD_DIR)
|
@ -0,0 +1,40 @@ |
||||
/*
|
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* Low resolution timer interface. Timer handlers may be called
|
||||
* in a deferred manner in a different task context after the
|
||||
* timer expires or in the task context from which the timer |
||||
* was created, depending on the implementation. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
#ifndef __bcmtimer_h__ |
||||
#define __bcmtimer_h__ |
||||
|
||||
/* ANSI headers */ |
||||
#include <time.h> |
||||
|
||||
/* timer ID */ |
||||
typedef unsigned int bcm_timer_module_id; |
||||
typedef unsigned int bcm_timer_id; |
||||
|
||||
/* timer callback */ |
||||
typedef void (*bcm_timer_cb)(bcm_timer_id id, int data); |
||||
|
||||
/* OS-independant interfaces, applications should call these functions only */ |
||||
int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id); |
||||
int bcm_timer_module_cleanup(bcm_timer_module_id module_id); |
||||
int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id); |
||||
int bcm_timer_delete(bcm_timer_id timer_id); |
||||
int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *value); |
||||
int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *value); |
||||
int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data); |
||||
int bcm_timer_cancel(bcm_timer_id timer_id); |
||||
|
||||
#endif /* #ifndef __bcmtimer_h__ */ |
@ -0,0 +1,179 @@ |
||||
/*
|
||||
* Router default NVRAM values |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#include <epivers.h> |
||||
#include <string.h> |
||||
#include <bcmnvram.h> |
||||
#include <typedefs.h> |
||||
#include <wlioctl.h> |
||||
|
||||
#define XSTR(s) STR(s) |
||||
#define STR(s) #s |
||||
|
||||
struct nvram_tuple router_defaults[] = { |
||||
/* OS parameters */ |
||||
{ "os_name", "", 0 }, /* OS name string */ |
||||
{ "os_version", EPI_VERSION_STR, 0 }, /* OS revision */ |
||||
{ "os_date", __DATE__, 0 }, /* OS date */ |
||||
|
||||
/* Miscellaneous parameters */ |
||||
{ "timer_interval", "3600", 0 }, /* Timer interval in seconds */ |
||||
{ "ntp_server", "192.5.41.40 192.5.41.41 133.100.9.2", 0 }, /* NTP server */ |
||||
{ "time_zone", "PST8PDT", 0 }, /* Time zone (GNU TZ format) */ |
||||
{ "log_level", "0", 0 }, /* Bitmask 0:off 1:denied 2:accepted */ |
||||
{ "upnp_enable", "0", 0 }, /* Start UPnP */ |
||||
{ "ezc_enable", "1", 0 }, /* Enable EZConfig updates */ |
||||
{ "ezc_version", "1", 0 }, /* EZConfig version */ |
||||
{ "is_default", "1", 0 }, /* is it default setting: 1:yes 0:no*/ |
||||
{ "os_server", "", 0 }, /* URL for getting upgrades */ |
||||
{ "stats_server", "", 0 }, /* URL for posting stats */ |
||||
{ "console_loglevel", "1", 0 }, /* Kernel panics only */ |
||||
|
||||
/* Big switches */ |
||||
{ "router_disable", "0", 0 }, /* lan_proto=static lan_stp=0 wan_proto=disabled */ |
||||
{ "fw_disable", "0", 0 }, /* Disable firewall (allow new connections from the WAN) */ |
||||
|
||||
{ "log_ipaddr", "", 0 }, /* syslog recipient */ |
||||
|
||||
/* LAN H/W parameters */ |
||||
{ "lan_ifname", "", 0 }, /* LAN interface name */ |
||||
{ "lan_ifnames", "", 0 }, /* Enslaved LAN interfaces */ |
||||
{ "lan_hwnames", "", 0 }, /* LAN driver names (e.g. et0) */ |
||||
{ "lan_hwaddr", "", 0 }, /* LAN interface MAC address */ |
||||
|
||||
/* LAN TCP/IP parameters */ |
||||
{ "lan_proto", "dhcp", 0 }, /* [static|dhcp] */ |
||||
{ "lan_ipaddr", "192.168.1.1", 0 }, /* LAN IP address */ |
||||
{ "lan_netmask", "255.255.255.0", 0 }, /* LAN netmask */ |
||||
{ "lan_stp", "0", 0 }, /* LAN spanning tree protocol */ |
||||
{ "lan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ |
||||
{ "lan_domain", "", 0 }, /* LAN domain name */ |
||||
{ "lan_lease", "86400", 0 }, /* LAN lease time in seconds */ |
||||
|
||||
/* WAN H/W parameters */ |
||||
{ "wan_ifname", "", 0 }, /* WAN interface name */ |
||||
{ "wan_ifnames", "", 0 }, /* WAN interface names */ |
||||
{ "wan_hwname", "", 0 }, /* WAN driver name (e.g. et1) */ |
||||
{ "wan_hwaddr", "", 0 }, /* WAN interface MAC address */ |
||||
|
||||
/* WAN TCP/IP parameters */ |
||||
{ "wan_proto", "dhcp", 0 }, /* [static|dhcp|pppoe|disabled] */ |
||||
{ "wan_ipaddr", "0.0.0.0", 0 }, /* WAN IP address */ |
||||
{ "wan_netmask", "0.0.0.0", 0 }, /* WAN netmask */ |
||||
{ "wan_gateway", "0.0.0.0", 0 }, /* WAN gateway */ |
||||
{ "wan_dns", "", 0 }, /* x.x.x.x x.x.x.x ... */ |
||||
{ "wan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ |
||||
{ "wan_hostname", "", 0 }, /* WAN hostname */ |
||||
{ "wan_domain", "", 0 }, /* WAN domain name */ |
||||
{ "wan_lease", "86400", 0 }, /* WAN lease time in seconds */ |
||||
|
||||
/* PPPoE parameters */ |
||||
{ "wan_pppoe_ifname", "", 0 }, /* PPPoE enslaved interface */ |
||||
{ "wan_pppoe_username", "", 0 }, /* PPP username */ |
||||
{ "wan_pppoe_passwd", "", 0 }, /* PPP password */ |
||||
{ "wan_pppoe_idletime", "60", 0 }, /* Dial on demand max idle time (seconds) */ |
||||
{ "wan_pppoe_keepalive", "0", 0 }, /* Restore link automatically */ |
||||
{ "wan_pppoe_demand", "0", 0 }, /* Dial on demand */ |
||||
{ "wan_pppoe_mru", "1492", 0 }, /* Negotiate MRU to this value */ |
||||
{ "wan_pppoe_mtu", "1492", 0 }, /* Negotiate MTU to the smaller of this value or the peer MRU */ |
||||
{ "wan_pppoe_service", "", 0 }, /* PPPoE service name */ |
||||
{ "wan_pppoe_ac", "", 0 }, /* PPPoE access concentrator name */ |
||||
|
||||
/* Misc WAN parameters */ |
||||
{ "wan_desc", "", 0 }, /* WAN connection description */ |
||||
{ "wan_route", "", 0 }, /* Static routes (ipaddr:netmask:gateway:metric:ifname ...) */ |
||||
{ "wan_primary", "0", 0 }, /* Primary wan connection */ |
||||
|
||||
{ "wan_unit", "0", 0 }, /* Last configured connection */ |
||||
|
||||
/* Filters */ |
||||
{ "filter_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ |
||||
{ "filter_macmode", "deny", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ |
||||
{ "filter_client0", "", 0 }, /* [lan_ipaddr0-lan_ipaddr1|*]:lan_port0-lan_port1,proto,enable,day_start-day_end,sec_start-sec_end,desc */ |
||||
|
||||
/* Port forwards */ |
||||
{ "dmz_ipaddr", "", 0 }, /* x.x.x.x (equivalent to 0-60999>dmz_ipaddr:0-60999) */ |
||||
{ "forward_port0", "", 0 }, /* wan_port0-wan_port1>lan_ipaddr:lan_port0-lan_port1[:,]proto[:,]enable[:,]desc */ |
||||
{ "autofw_port0", "", 0 }, /* out_proto:out_port,in_proto:in_port0-in_port1>to_port0-to_port1,enable,desc */ |
||||
|
||||
/* DHCP server parameters */ |
||||
{ "dhcp_start", "192.168.1.100", 0 }, /* First assignable DHCP address */ |
||||
{ "dhcp_end", "192.168.1.150", 0 }, /* Last assignable DHCP address */ |
||||
{ "dhcp_domain", "wan", 0 }, /* Use WAN domain name first if available (wan|lan) */ |
||||
{ "dhcp_wins", "wan", 0 }, /* Use WAN WINS first if available (wan|lan) */ |
||||
|
||||
/* Web server parameters */ |
||||
{ "http_username", "", 0 }, /* Username */ |
||||
{ "http_passwd", "admin", 0 }, /* Password */ |
||||
{ "http_wanport", "", 0 }, /* WAN port to listen on */ |
||||
{ "http_lanport", "80", 0 }, /* LAN port to listen on */ |
||||
|
||||
/* Wireless parameters */ |
||||
{ "wl_ifname", "", 0 }, /* Interface name */ |
||||
{ "wl_hwaddr", "", 0 }, /* MAC address */ |
||||
{ "wl_phytype", "g", 0 }, /* Current wireless band ("a" (5 GHz), "b" (2.4 GHz), or "g" (2.4 GHz)) */ |
||||
{ "wl_corerev", "", 0 }, /* Current core revision */ |
||||
{ "wl_phytypes", "", 0 }, /* List of supported wireless bands (e.g. "ga") */ |
||||
{ "wl_radioids", "", 0 }, /* List of radio IDs */ |
||||
{ "wl_ssid", "linksys", 0 }, /* Service set ID (network name) */ |
||||
{ "wl_country", "", 0 }, /* Country (default obtained from driver) */ |
||||
{ "wl_radio", "1", 0 }, /* Enable (1) or disable (0) radio */ |
||||
{ "wl_closed", "0", 0 }, /* Closed (hidden) network */ |
||||
{ "wl_ap_isolate", "0", 0 }, /* AP isolate mode */ |
||||
{ "wl_mode", "ap", 0 }, /* AP mode (ap|sta|wds) */ |
||||
{ "wl_lazywds", "1", 0 }, /* Enable "lazy" WDS mode (0|1) */ |
||||
{ "wl_wds", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ |
||||
{ "wl_wep", "disabled", 0 }, /* WEP data encryption (enabled|disabled) */ |
||||
{ "wl_auth", "0", 0 }, /* Shared key authentication optional (0) or required (1) */ |
||||
{ "wl_key", "1", 0 }, /* Current WEP key */ |
||||
{ "wl_key1", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ |
||||
{ "wl_key2", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ |
||||
{ "wl_key3", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ |
||||
{ "wl_key4", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ |
||||
{ "wl_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ |
||||
{ "wl_macmode", "disabled", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ |
||||
{ "wl_channel", "11", 0 }, /* Channel number */ |
||||
{ "wl_rate", "0", 0 }, /* Rate (bps, 0 for auto) */ |
||||
{ "wl_rateset", "default", 0 }, /* "default" or "all" or "12" */ |
||||
{ "wl_frag", "2346", 0 }, /* Fragmentation threshold */ |
||||
{ "wl_rts", "2347", 0 }, /* RTS threshold */ |
||||
{ "wl_dtim", "1", 0 }, /* DTIM period */ |
||||
{ "wl_bcn", "100", 0 }, /* Beacon interval */ |
||||
{ "wl_plcphdr", "long", 0 }, /* 802.11b PLCP preamble type */ |
||||
{ "wl_net_mode", "mixed", 0 }, /* 54g mode */ |
||||
{ "wl_gmode", "6", 0 }, /* 54g mode */ |
||||
{ "wl_gmode_protection", "auto", 0 }, /* 802.11g RTS/CTS protection (off|auto) */ |
||||
{ "wl_afterburner", "auto", 0 }, /* AfterBurner */ |
||||
{ "wl_frameburst", "off", 0 }, /* BRCM Frambursting mode (off|on) */ |
||||
{ "wl_antdiv", "-1", 0 }, /* Antenna Diversity (-1|0|1|3) */ |
||||
{ "wl_infra", "1", 0 }, /* Network Type (BSS/IBSS) */ |
||||
|
||||
/* WPA parameters */ |
||||
{ "security_mode", "open", 0 }, |
||||
{ "wl_auth_mode", "open", 0 }, /* Network authentication mode (open|shared|radius|wpa|psk) */ |
||||
{ "wl_wpa_psk", "", 0 }, /* WPA pre-shared key */ |
||||
{ "wl_wpa_gtk_rekey", "3600", 0 }, /* GTK rotation interval */ |
||||
{ "wl_radius_ipaddr", "", 0 }, /* RADIUS server IP address */ |
||||
{ "wl_radius_key", "", 0 }, /* RADIUS shared secret */ |
||||
{ "wl_radius_port", "1812", 0 }, /* RADIUS server UDP port */ |
||||
{ "wl_crypto", "tkip", 0 }, /* WPA data encryption */ |
||||
|
||||
|
||||
{ "wl_unit", "0", 0 }, /* Last configured interface */ |
||||
|
||||
/* Restore defaults */ |
||||
{ "restore_defaults", "0", 0 }, /* Set to 0 to not restore defaults on boot */ |
||||
|
||||
{ 0, 0, 0 } |
||||
}; |
@ -0,0 +1,707 @@ |
||||
/*
|
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* Low resolution timer interface linux specific implementation. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
/*
|
||||
* debug facilities |
||||
*/ |
||||
#define TIMER_DEBUG 0 |
||||
#if TIMER_DEBUG |
||||
#define TIMERDBG(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args) |
||||
#else |
||||
#define TIMERDBG(fmt, args...) |
||||
#endif |
||||
|
||||
|
||||
/*
|
||||
* POSIX timer support for Linux. Taken from linux_timer.c in upnp |
||||
*/ |
||||
|
||||
#define __USE_GNU |
||||
|
||||
|
||||
#include <stdlib.h> // for malloc, free, etc. |
||||
#include <string.h> // for memset, strncasecmp, etc. |
||||
#include <assert.h> // for assert, of course. |
||||
#include <signal.h> // for sigemptyset, etc. |
||||
#include <stdio.h> // for printf, etc. |
||||
#include <sys/time.h> |
||||
#include <time.h> |
||||
|
||||
/* define TIMER_PROFILE to enable code which guages how accurate the timer functions are.
|
||||
For each expiring timer the code will print the expected time interval and the actual time interval. |
||||
#define TIMER_PROFILE |
||||
*/ |
||||
#undef TIMER_PROFILE |
||||
|
||||
/*
|
||||
timer_cancel( ) - cancel a timer |
||||
timer_connect( ) - connect a user routine to the timer signal |
||||
timer_create( ) - allocate a timer using the specified clock for a timing base (POSIX) |
||||
timer_delete( ) - remove a previously created timer (POSIX) |
||||
timer_gettime( ) - get the remaining time before expiration and the reload value (POSIX) |
||||
timer_getoverrun( ) - return the timer expiration overrun (POSIX) |
||||
timer_settime( ) - set the time until the next expiration and arm timer (POSIX) |
||||
nanosleep( ) - suspend the current task until the time interval elapses (POSIX) |
||||
*/ |
||||
|
||||
#define MS_PER_SEC 1000 |
||||
#define US_PER_SEC 1000000 |
||||
#define US_PER_MS 1000 |
||||
#define UCLOCKS_PER_SEC 1000000 |
||||
|
||||
typedef void (*event_callback_t)(timer_t, int); |
||||
|
||||
#ifndef TIMESPEC_TO_TIMEVAL |
||||
# define TIMESPEC_TO_TIMEVAL(tv, ts) { \ |
||||
(tv)->tv_sec = (ts)->tv_sec; \
|
||||
(tv)->tv_usec = (ts)->tv_nsec / 1000; \
|
||||
} |
||||
#endif |
||||
|
||||
#ifndef TIMEVAL_TO_TIMESPEC |
||||
# define TIMEVAL_TO_TIMESPEC(tv, ts) { \ |
||||
(ts)->tv_sec = (tv)->tv_sec; \
|
||||
(ts)->tv_nsec = (tv)->tv_usec * 1000; \
|
||||
} |
||||
#endif |
||||
|
||||
#define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y)) |
||||
|
||||
#define timerroundup(t,g) \ |
||||
do { \
|
||||
if (!timerisset(t)) (t)->tv_usec=1; \
|
||||
if ((t)->tv_sec == 0) (t)->tv_usec=ROUNDUP((t)->tv_usec, g); \
|
||||
} while (0) |
||||
|
||||
typedef long uclock_t; |
||||
|
||||
#define TFLAG_NONE 0 |
||||
#define TFLAG_CANCELLED (1<<0) |
||||
#define TFLAG_DELETED (1<<1) |
||||
|
||||
struct event { |
||||
struct timeval it_interval; |
||||
struct timeval it_value; |
||||
event_callback_t func; |
||||
int arg; |
||||
unsigned short flags; |
||||
struct event *next; |
||||
#ifdef TIMER_PROFILE |
||||
uint expected_ms; |
||||
uclock_t start; |
||||
#endif |
||||
}; |
||||
|
||||
void timer_cancel(timer_t timerid); |
||||
|
||||
static void alarm_handler(int i); |
||||
static void check_event_queue(); |
||||
static void print_event_queue(); |
||||
static void check_timer(); |
||||
#if THIS_FINDS_USE |
||||
static int count_queue(struct event *); |
||||
#endif |
||||
|
||||
void block_timer(); |
||||
void unblock_timer(); |
||||
|
||||
static struct event *event_queue = NULL; |
||||
static struct event *event_freelist; |
||||
static uint g_granularity; |
||||
static int g_maxevents = 0; |
||||
|
||||
uclock_t uclock() |
||||
{ |
||||
struct timeval tv; |
||||
|
||||
gettimeofday(&tv, NULL); |
||||
return ((tv.tv_sec * US_PER_SEC) + tv.tv_usec); |
||||
} |
||||
|
||||
|
||||
void init_event_queue(int n) |
||||
{ |
||||
int i; |
||||
struct itimerval tv; |
||||
|
||||
g_maxevents = n; |
||||
event_freelist = (struct event *) malloc(n * sizeof(struct event)); |
||||
memset(event_freelist, 0, n * sizeof(struct event)); |
||||
|
||||
for (i = 0; i < (n-1); i++)
|
||||
event_freelist[i].next = &event_freelist[i+1]; |
||||
|
||||
event_freelist[i].next = NULL; |
||||
|
||||
tv.it_interval.tv_sec = 0; |
||||
tv.it_interval.tv_usec = 1; |
||||
tv.it_value.tv_sec = 0; |
||||
tv.it_value.tv_usec = 0; |
||||
setitimer (ITIMER_REAL, &tv, 0); |
||||
setitimer (ITIMER_REAL, 0, &tv); |
||||
g_granularity = tv.it_interval.tv_usec; |
||||
|
||||
signal(SIGALRM, alarm_handler); |
||||
} |
||||
|
||||
|
||||
int clock_gettime( |
||||
clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ |
||||
struct timespec * tp /* where to store current time */ |
||||
) |
||||
{ |
||||
struct timeval tv; |
||||
int n; |
||||
|
||||
|
||||
n = gettimeofday(&tv, NULL); |
||||
TIMEVAL_TO_TIMESPEC(&tv, tp); |
||||
|
||||
return n; |
||||
} |
||||
|
||||
|
||||
int timer_create( |
||||
clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ |
||||
struct sigevent * evp, /* user event handler */ |
||||
timer_t * pTimer /* ptr to return value */ |
||||
) |
||||
{ |
||||
struct event *event; |
||||
|
||||
if (clock_id != CLOCK_REALTIME) { |
||||
TIMERDBG("timer_create can only support clock id CLOCK_REALTIME"); |
||||
exit(1); |
||||
} |
||||
|
||||
if (evp != NULL) { |
||||
if (evp->sigev_notify != SIGEV_SIGNAL || evp->sigev_signo != SIGALRM) { |
||||
TIMERDBG("timer_create can only support signalled alarms using SIGALRM"); |
||||
exit(1); |
||||
} |
||||
} |
||||
|
||||
event = event_freelist; |
||||
if (event == NULL) { |
||||
print_event_queue(); |
||||
} |
||||
assert(event != NULL); |
||||
|
||||
event->flags = TFLAG_NONE; |
||||
|
||||
event_freelist = event->next; |
||||
event->next = NULL; |
||||
|
||||
check_event_queue(); |
||||
|
||||
*pTimer = (timer_t) event; |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
int timer_delete( |
||||
timer_t timerid /* timer ID */ |
||||
) |
||||
{ |
||||
struct event *event = (struct event *) timerid; |
||||
|
||||
if (event->flags & TFLAG_DELETED) { |
||||
TIMERDBG("Cannot delete a deleted event"); |
||||
return 1; |
||||
} |
||||
|
||||
timer_cancel(timerid); |
||||
|
||||
event->flags |= TFLAG_DELETED; |
||||
|
||||
event->next = event_freelist; |
||||
event_freelist = event; |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
int timer_connect |
||||
( |
||||
timer_t timerid, /* timer ID */ |
||||
void (*routine)(timer_t, int), /* user routine */ |
||||
int arg /* user argument */ |
||||
) |
||||
{ |
||||
struct event *event = (struct event *) timerid; |
||||
|
||||
assert(routine != NULL); |
||||
event->func = routine; |
||||
event->arg = arg; |
||||
|
||||
return 0; |
||||
}
|
||||
|
||||
|
||||
int timer_settime |
||||
( |
||||
timer_t timerid, /* timer ID */ |
||||
int flags, /* absolute or relative */ |
||||
const struct itimerspec * value, /* time to be set */ |
||||
struct itimerspec * ovalue /* previous time set (NULL=no result) */ |
||||
) |
||||
{ |
||||
struct itimerval itimer; |
||||
struct event *event = (struct event *) timerid; |
||||
struct event **ppevent; |
||||
|
||||
TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval); |
||||
TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value); |
||||
|
||||
/* if .it_value is zero, the timer is disarmed */ |
||||
if (!timerisset(&event->it_value)) { |
||||
timer_cancel(timerid); |
||||
return 0; |
||||
} |
||||
|
||||
block_timer(); |
||||
|
||||
#ifdef TIMER_PROFILE |
||||
event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); |
||||
event->start = uclock(); |
||||
#endif |
||||
if (event->next) { |
||||
TIMERDBG("calling timer_settime with a timer that is already on the queue."); |
||||
} |
||||
|
||||
|
||||
/* We always want to make sure that the event at the head of the
|
||||
queue has a timeout greater than the itimer granularity. |
||||
Otherwise we end up with the situation that the time remaining |
||||
on an itimer is greater than the time at the head of the queue |
||||
in the first place. */ |
||||
timerroundup(&event->it_value, g_granularity); |
||||
|
||||
timerclear(&itimer.it_value); |
||||
getitimer(ITIMER_REAL, &itimer); |
||||
if (timerisset(&itimer.it_value)) { |
||||
// reset the top timer to have an interval equal to the remaining interval
|
||||
// when the timer was cancelled.
|
||||
if (event_queue) { |
||||
if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { |
||||
// it is an error if the amount of time remaining is more than the amount of time
|
||||
// requested by the top event.
|
||||
//
|
||||
TIMERDBG("timer_settime: TIMER ERROR!"); |
||||
|
||||
} else { |
||||
// some portion of the top event has already expired.
|
||||
// Reset the interval of the top event to remaining
|
||||
// time left in that interval.
|
||||
//
|
||||
event_queue->it_value = itimer.it_value; |
||||
|
||||
// if we were the earliest timer before now, we are still the earliest timer now.
|
||||
// we do not need to reorder the list.
|
||||
} |
||||
} |
||||
} |
||||
|
||||
// Now, march down the list, decrementing the new timer by the
|
||||
// current it_value of each event on the queue.
|
||||
ppevent = &event_queue; |
||||
while (*ppevent) { |
||||
if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { |
||||
// if the proposed event will trigger sooner than the next event
|
||||
// in the queue, we will insert the new event just before the next one.
|
||||
//
|
||||
// we also need to adjust the delta value to the next event.
|
||||
timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); |
||||
break; |
||||
} |
||||
// subtract the interval of the next event from the proposed interval.
|
||||
timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); |
||||
|
||||
ppevent = &((*ppevent)->next); |
||||
} |
||||
|
||||
// we have found our proper place in the queue,
|
||||
// link our new event into the pending event queue.
|
||||
event->next = *ppevent; |
||||
*ppevent = event; |
||||
|
||||
check_event_queue(); |
||||
|
||||
// if our new event ended up at the front of the queue, reissue the timer.
|
||||
if (event == event_queue) { |
||||
timerroundup(&event_queue->it_value, g_granularity); |
||||
timerclear(&itimer.it_interval); |
||||
itimer.it_value = event_queue->it_value; |
||||
|
||||
// we want to be sure to never turn off the timer completely,
|
||||
// so if the next interval is zero, set it to some small value.
|
||||
if (!timerisset(&(itimer.it_value))) |
||||
itimer.it_value = (struct timeval) { 0, 1 }; |
||||
|
||||
assert(!timerisset(&itimer.it_interval)); |
||||
assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); |
||||
assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); |
||||
setitimer(ITIMER_REAL, &itimer, NULL); |
||||
check_timer(); |
||||
} |
||||
|
||||
event->flags &= ~TFLAG_CANCELLED; |
||||
|
||||
unblock_timer(); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
static void check_timer() |
||||
{ |
||||
struct itimerval itimer; |
||||
|
||||
getitimer(ITIMER_REAL, &itimer); |
||||
if (timerisset(&itimer.it_interval)) { |
||||
TIMERDBG("ERROR timer interval is set."); |
||||
} |
||||
if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { |
||||
TIMERDBG("ERROR timer expires later than top event."); |
||||
} |
||||
} |
||||
|
||||
|
||||
static void check_event_queue() |
||||
{ |
||||
struct timeval sum; |
||||
struct event *event; |
||||
int i = 0; |
||||
|
||||
#ifdef notdef |
||||
int nfree = 0; |
||||
struct event *p; |
||||
for (p = event_freelist; p; p = p->next) |
||||
nfree++; |
||||
printf("%d free events\n", nfree); |
||||
#endif |
||||
|
||||
timerclear(&sum); |
||||
for (event = event_queue; event; event = event->next) { |
||||
if (i > g_maxevents) { |
||||
TIMERDBG("timer queue looks like it loops back on itself!"); |
||||
print_event_queue(); |
||||
exit(1); |
||||
} |
||||
i++; |
||||
} |
||||
} |
||||
|
||||
#if THIS_FINDS_USE |
||||
/* The original upnp version has this unused function, so I left it in
|
||||
to maintain the resemblance. */ |
||||
static int count_queue(struct event *event_queue) |
||||
{ |
||||
struct event *event; |
||||
int i = 0; |
||||
for (event = event_queue; event; event = event->next)
|
||||
i++; |
||||
return i; |
||||
} |
||||
#endif |
||||
|
||||
static void print_event_queue() |
||||
{ |
||||
struct event *event; |
||||
int i = 0; |
||||
|
||||
for (event = event_queue; event; event = event->next) { |
||||
printf("#%d (0x%x)->0x%x: \t%d sec %d usec\t%p\n",
|
||||
i++, (unsigned int) event, (unsigned int) event->next, (int) event->it_value.tv_sec, (int) event->it_value.tv_usec, event->func); |
||||
if (i > g_maxevents) { |
||||
printf("...(giving up)\n"); |
||||
break; |
||||
} |
||||
} |
||||
} |
||||
|
||||
// The top element of the event queue must have expired.
|
||||
// Remove that element, run its function, and reset the timer.
|
||||
// if there is no interval, recycle the event structure.
|
||||
static void alarm_handler(int i) |
||||
{ |
||||
struct event *event, **ppevent; |
||||
struct itimerval itimer; |
||||
struct timeval small_interval = { 0, g_granularity/2 }; |
||||
#ifdef TIMER_PROFILE |
||||
uint junk; |
||||
uclock_t end; |
||||
uint actual; |
||||
#endif |
||||
|
||||
block_timer(); |
||||
|
||||
// Loop through the event queue and remove the first event plus any
|
||||
// subsequent events that will expire very soon thereafter (within 'small_interval'}.
|
||||
//
|
||||
do { |
||||
// remove the top event.
|
||||
event = event_queue; |
||||
event_queue = event_queue->next; |
||||
event->next = NULL; |
||||
|
||||
#ifdef TIMER_PROFILE |
||||
end = uclock(); |
||||
actual = ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000)); |
||||
if (actual < 0) |
||||
junk = end; |
||||
TIMERDBG("expected %d ms actual %d ms", event->expected_ms, ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000))); |
||||
#endif |
||||
|
||||
// call the event callback function
|
||||
(*(event->func))((timer_t) event, (int)event->arg); |
||||
|
||||
/* If the event has been cancelled, do NOT put it back on the queue. */ |
||||
if ( !(event->flags & TFLAG_CANCELLED) ) { |
||||
|
||||
// if the event is a recurring event, reset the timer and
|
||||
// find its correct place in the sorted list of events.
|
||||
//
|
||||
if (timerisset(&event->it_interval)) { |
||||
// event is recurring...
|
||||
//
|
||||
event->it_value = event->it_interval; |
||||
#ifdef TIMER_PROFILE |
||||
event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); |
||||
event->start = uclock(); |
||||
#endif |
||||
timerroundup(&event->it_value, g_granularity); |
||||
|
||||
// Now, march down the list, decrementing the new timer by the
|
||||
// current delta of each event on the queue.
|
||||
ppevent = &event_queue; |
||||
while (*ppevent) { |
||||
if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { |
||||
// if the proposed event will trigger sooner than the next event
|
||||
// in the queue, we will insert the new event just before the next one.
|
||||
//
|
||||
// we also need to adjust the delta value to the next event.
|
||||
timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); |
||||
break; |
||||
} |
||||
timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); |
||||
ppevent = &((*ppevent)->next); |
||||
} |
||||
|
||||
// we have found our proper place in the queue,
|
||||
// link our new event into the pending event queue.
|
||||
event->next = *ppevent; |
||||
*ppevent = event; |
||||
} else { |
||||
// there is no interval, so recycle the event structure.
|
||||
//timer_delete((timer_t) event);
|
||||
} |
||||
} |
||||
|
||||
check_event_queue(); |
||||
|
||||
} while (event_queue && timercmp(&event_queue->it_value, &small_interval, <)); |
||||
|
||||
// re-issue the timer...
|
||||
if (event_queue) { |
||||
timerroundup(&event_queue->it_value, g_granularity); |
||||
|
||||
timerclear(&itimer.it_interval); |
||||
itimer.it_value = event_queue->it_value; |
||||
// we want to be sure to never turn off the timer completely,
|
||||
// so if the next interval is zero, set it to some small value.
|
||||
if (!timerisset(&(itimer.it_value))) |
||||
itimer.it_value = (struct timeval) { 0, 1 }; |
||||
|
||||
setitimer(ITIMER_REAL, &itimer, NULL); |
||||
check_timer(); |
||||
} else { |
||||
TIMERDBG("There are no events in the queue - timer not reset."); |
||||
} |
||||
|
||||
unblock_timer(); |
||||
} |
||||
|
||||
static int block_count = 0; |
||||
|
||||
void block_timer() |
||||
{ |
||||
sigset_t set; |
||||
|
||||
if (block_count++ == 0) { |
||||
sigemptyset(&set); |
||||
sigaddset(&set, SIGALRM); |
||||
sigprocmask(SIG_BLOCK, &set, NULL); |
||||
} |
||||
} |
||||
|
||||
void unblock_timer() |
||||
{ |
||||
sigset_t set; |
||||
|
||||
if (--block_count == 0) { |
||||
sigemptyset(&set); |
||||
sigaddset(&set, SIGALRM); |
||||
sigprocmask(SIG_UNBLOCK, &set, NULL); |
||||
} |
||||
} |
||||
|
||||
void timer_cancel_all() |
||||
{ |
||||
struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; |
||||
struct event *event; |
||||
struct event **ppevent; |
||||
|
||||
setitimer(ITIMER_REAL, &timeroff, NULL); |
||||
|
||||
ppevent = &event_queue; |
||||
while (*ppevent) { |
||||
event = *ppevent; |
||||
*ppevent = event->next; |
||||
event->next = NULL; |
||||
} |
||||
} |
||||
|
||||
|
||||
|
||||
void timer_cancel(timer_t timerid) |
||||
{ |
||||
struct itimerval itimer; |
||||
struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; |
||||
struct event *event = (struct event *) timerid; |
||||
struct event **ppevent; |
||||
|
||||
if (event->flags & TFLAG_CANCELLED) { |
||||
TIMERDBG("Cannot cancel a cancelled event"); |
||||
return; |
||||
} |
||||
|
||||
block_timer(); |
||||
|
||||
ppevent = &event_queue; |
||||
while (*ppevent) { |
||||
if ( *ppevent == event ) { |
||||
|
||||
/* RACE CONDITION - if the alarm goes off while we are in
|
||||
this loop, and if the timer we want to cancel is the |
||||
next to expire, the alarm will end up firing |
||||
after this routine is complete, causing it to go off early. */ |
||||
|
||||
/* If the cancelled timer is the next to expire,
|
||||
we need to do something special to clean up correctly. */ |
||||
if (event == event_queue && event->next != NULL) { |
||||
timerclear(&itimer.it_value); |
||||
getitimer(ITIMER_REAL, &itimer); |
||||
|
||||
/* subtract the time that has already passed while waiting for this timer... */ |
||||
timersub(&(event->it_value), &(itimer.it_value), &(event->it_value)); |
||||
|
||||
/* and add any remainder to the next timer in the list */ |
||||
timeradd(&(event->next->it_value), &(event->it_value), &(event->next->it_value)); |
||||
} |
||||
|
||||
*ppevent = event->next; |
||||
event->next = NULL; |
||||
|
||||
if (event_queue) { |
||||
timerroundup(&event_queue->it_value, g_granularity); |
||||
timerclear(&itimer.it_interval); |
||||
itimer.it_value = event_queue->it_value; |
||||
|
||||
/* We want to be sure to never turn off the timer
|
||||
completely if there are more events on the queue, |
||||
so if the next interval is zero, set it to some |
||||
small value. */ |
||||
|
||||
if (!timerisset(&(itimer.it_value))) |
||||
itimer.it_value = (struct timeval) { 0, 1 }; |
||||
|
||||
assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); |
||||
assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); |
||||
setitimer(ITIMER_REAL, &itimer, NULL); |
||||
check_timer(); |
||||
} else { |
||||
setitimer(ITIMER_REAL, &timeroff, NULL); |
||||
} |
||||
break; |
||||
} |
||||
ppevent = &((*ppevent)->next); |
||||
} |
||||
|
||||
event->flags |= TFLAG_CANCELLED; |
||||
|
||||
unblock_timer(); |
||||
} |
||||
|
||||
/*
|
||||
* timer related headers |
||||
*/ |
||||
#include "bcmtimer.h" |
||||
|
||||
/*
|
||||
* locally used global variables and constants |
||||
*/ |
||||
|
||||
/*
|
||||
* Initialize internal resources used in the timer module. It must be called |
||||
* before any other timer function calls. The param 'timer_entries' is used |
||||
* to pre-allocate fixed number of timer entries. |
||||
*/ |
||||
int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id) |
||||
{ |
||||
init_event_queue(timer_entries); |
||||
*module_id = (bcm_timer_module_id)event_freelist; |
||||
return 0; |
||||
} |
||||
|
||||
/*
|
||||
* Cleanup internal resources used by this timer module. It deletes all |
||||
* pending timer entries from the backend timer system as well. |
||||
*/ |
||||
int bcm_timer_module_cleanup(bcm_timer_module_id module_id) |
||||
{ |
||||
module_id = 0; |
||||
return 0; |
||||
} |
||||
|
||||
int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id) |
||||
{ |
||||
module_id = 0; |
||||
return timer_create(CLOCK_REALTIME, NULL, (timer_t *)timer_id); |
||||
} |
||||
|
||||
int bcm_timer_delete(bcm_timer_id timer_id) |
||||
{ |
||||
return timer_delete((timer_t)timer_id); |
||||
} |
||||
|
||||
int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *timer_spec) |
||||
{ |
||||
return -1; |
||||
} |
||||
|
||||
int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *timer_spec) |
||||
{ |
||||
return timer_settime((timer_t)timer_id, 0, timer_spec, NULL); |
||||
} |
||||
|
||||
int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data) |
||||
{ |
||||
return timer_connect((timer_t)timer_id, (void *)func, data); |
||||
} |
||||
|
||||
int bcm_timer_cancel(bcm_timer_id timer_id) |
||||
{ |
||||
timer_cancel((timer_t)timer_id); |
||||
return 0; |
||||
} |
||||
|
@ -0,0 +1,329 @@ |
||||
/*
|
||||
* Shell-like utility functions |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#include <stdio.h> |
||||
#include <stdlib.h> |
||||
#include <stdarg.h> |
||||
#include <errno.h> |
||||
#include <error.h> |
||||
#include <fcntl.h> |
||||
#include <limits.h> |
||||
#include <unistd.h> |
||||
#include <signal.h> |
||||
#include <string.h> |
||||
#include <sys/types.h> |
||||
#include <sys/stat.h> |
||||
#include <sys/wait.h> |
||||
#include <termios.h> |
||||
#include <sys/ioctl.h> |
||||
#include <sys/time.h> |
||||
#include <net/ethernet.h> |
||||
|
||||
#include <shutils.h> |
||||
|
||||
/*
|
||||
* Reads file and returns contents |
||||
* @param fd file descriptor |
||||
* @return contents of file or NULL if an error occurred |
||||
*/ |
||||
char * |
||||
fd2str(int fd) |
||||
{ |
||||
char *buf = NULL; |
||||
size_t count = 0, n; |
||||
|
||||
do { |
||||
buf = realloc(buf, count + 512); |
||||
n = read(fd, buf + count, 512); |
||||
if (n < 0) { |
||||
free(buf); |
||||
buf = NULL; |
||||
} |
||||
count += n; |
||||
} while (n == 512); |
||||
|
||||
close(fd); |
||||
if (buf) |
||||
buf[count] = '\0'; |
||||
return buf; |
||||
} |
||||
|
||||
/*
|
||||
* Reads file and returns contents |
||||
* @param path path to file |
||||
* @return contents of file or NULL if an error occurred |
||||
*/ |
||||
char * |
||||
file2str(const char *path) |
||||
{ |
||||
int fd; |
||||
|
||||
if ((fd = open(path, O_RDONLY)) == -1) { |
||||
perror(path); |
||||
return NULL; |
||||
} |
||||
|
||||
return fd2str(fd); |
||||
} |
||||
|
||||
/*
|
||||
* Waits for a file descriptor to change status or unblocked signal |
||||
* @param fd file descriptor |
||||
* @param timeout seconds to wait before timing out or 0 for no timeout |
||||
* @return 1 if descriptor changed status or 0 if timed out or -1 on error |
||||
*/ |
||||
int |
||||
waitfor(int fd, int timeout) |
||||
{ |
||||
fd_set rfds; |
||||
struct timeval tv = { timeout, 0 }; |
||||
|
||||
FD_ZERO(&rfds); |
||||
FD_SET(fd, &rfds); |
||||
return select(fd + 1, &rfds, NULL, NULL, (timeout > 0) ? &tv : NULL); |
||||
} |
||||
|
||||
/*
|
||||
* Concatenates NULL-terminated list of arguments into a single |
||||
* commmand and executes it |
||||
* @param argv argument list |
||||
* @param path NULL, ">output", or ">>output" |
||||
* @param timeout seconds to wait before timing out or 0 for no timeout |
||||
* @param ppid NULL to wait for child termination or pointer to pid |
||||
* @return return value of executed command or errno |
||||
*/ |
||||
int |
||||
_eval(char *const argv[], char *path, int timeout, int *ppid) |
||||
{ |
||||
pid_t pid; |
||||
int status; |
||||
int fd; |
||||
int flags; |
||||
int sig; |
||||
char buf[254]=""; |
||||
int i; |
||||
|
||||
switch (pid = fork()) { |
||||
case -1: /* error */ |
||||
perror("fork"); |
||||
return errno; |
||||
case 0: /* child */ |
||||
/* Reset signal handlers set for parent process */ |
||||
for (sig = 0; sig < (_NSIG-1); sig++) |
||||
signal(sig, SIG_DFL); |
||||
|
||||
/* Clean up */ |
||||
ioctl(0, TIOCNOTTY, 0); |
||||
close(STDIN_FILENO); |
||||
close(STDOUT_FILENO); |
||||
close(STDERR_FILENO); |
||||
setsid(); |
||||
|
||||
/* We want to check the board if exist UART? , add by honor 2003-12-04 */ |
||||
if ((fd = open("/dev/console", O_RDWR)) < 0) { |
||||
(void) open("/dev/null", O_RDONLY); |
||||
(void) open("/dev/null", O_WRONLY); |
||||
(void) open("/dev/null", O_WRONLY); |
||||
} |
||||
else{ |
||||
close(fd); |
||||
(void) open("/dev/console", O_RDONLY); |
||||
(void) open("/dev/console", O_WRONLY); |
||||
(void) open("/dev/console", O_WRONLY); |
||||
} |
||||
|
||||
/* Redirect stdout to <path> */ |
||||
if (path) { |
||||
flags = O_WRONLY | O_CREAT; |
||||
if (!strncmp(path, ">>", 2)) { |
||||
/* append to <path> */ |
||||
flags |= O_APPEND; |
||||
path += 2; |
||||
} else if (!strncmp(path, ">", 1)) { |
||||
/* overwrite <path> */ |
||||
flags |= O_TRUNC; |
||||
path += 1; |
||||
} |
||||
if ((fd = open(path, flags, 0644)) < 0) |
||||
perror(path); |
||||
else { |
||||
dup2(fd, STDOUT_FILENO); |
||||
close(fd); |
||||
} |
||||
} |
||||
|
||||
/* execute command */ |
||||
for(i=0 ; argv[i] ; i++) |
||||
snprintf(buf+strlen(buf), sizeof(buf), "%s ", argv[i]); |
||||
dprintf("cmd=[%s]\n", buf); |
||||
setenv("PATH", "/sbin:/bin:/usr/sbin:/usr/bin", 1); |
||||
alarm(timeout); |
||||
execvp(argv[0], argv); |
||||
perror(argv[0]); |
||||
exit(errno); |
||||
default: /* parent */ |
||||
if (ppid) { |
||||
*ppid = pid; |
||||
return 0; |
||||
} else { |
||||
waitpid(pid, &status, 0); |
||||
if (WIFEXITED(status)) |
||||
return WEXITSTATUS(status); |
||||
else |
||||
return status; |
||||
} |
||||
} |
||||
} |
||||
|
||||
/*
|
||||
* Concatenates NULL-terminated list of arguments into a single |
||||
* commmand and executes it |
||||
* @param argv argument list |
||||
* @return stdout of executed command or NULL if an error occurred |
||||
*/ |
||||
char * |
||||
_backtick(char *const argv[]) |
||||
{ |
||||
int filedes[2]; |
||||
pid_t pid; |
||||
int status; |
||||
char *buf = NULL; |
||||
|
||||
/* create pipe */ |
||||
if (pipe(filedes) == -1) { |
||||
perror(argv[0]); |
||||
return NULL; |
||||
} |
||||
|
||||
switch (pid = fork()) { |
||||
case -1: /* error */ |
||||
return NULL; |
||||
case 0: /* child */ |
||||
close(filedes[0]); /* close read end of pipe */ |
||||
dup2(filedes[1], 1); /* redirect stdout to write end of pipe */ |
||||
close(filedes[1]); /* close write end of pipe */ |
||||
execvp(argv[0], argv); |
||||
exit(errno); |
||||
break; |
||||
default: /* parent */ |
||||
close(filedes[1]); /* close write end of pipe */ |
||||
buf = fd2str(filedes[0]); |
||||
waitpid(pid, &status, 0); |
||||
break; |
||||
} |
||||
|
||||
return buf; |
||||
} |
||||
|
||||
/*
|
||||
* Kills process whose PID is stored in plaintext in pidfile |
||||
* @param pidfile PID file |
||||
* @return 0 on success and errno on failure |
||||
*/ |
||||
int |
||||
kill_pidfile(char *pidfile) |
||||
{ |
||||
FILE *fp = fopen(pidfile, "r"); |
||||
char buf[256]; |
||||
|
||||
if (fp && fgets(buf, sizeof(buf), fp)) { |
||||
pid_t pid = strtoul(buf, NULL, 0); |
||||
fclose(fp); |
||||
return kill(pid, SIGTERM); |
||||
} else |
||||
return errno; |
||||
} |
||||
|
||||
/*
|
||||
* fread() with automatic retry on syscall interrupt |
||||
* @param ptr location to store to |
||||
* @param size size of each element of data |
||||
* @param nmemb number of elements |
||||
* @param stream file stream |
||||
* @return number of items successfully read |
||||
*/ |
||||
int |
||||
safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream) |
||||
{ |
||||
size_t ret = 0; |
||||
|
||||
do { |
||||
clearerr(stream); |
||||
ret += fread((char *)ptr + (ret * size), size, nmemb - ret, stream); |
||||
} while (ret < nmemb && ferror(stream) && errno == EINTR); |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
/*
|
||||
* fwrite() with automatic retry on syscall interrupt |
||||
* @param ptr location to read from |
||||
* @param size size of each element of data |
||||
* @param nmemb number of elements |
||||
* @param stream file stream |
||||
* @return number of items successfully written |
||||
*/ |
||||
int |
||||
safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream) |
||||
{ |
||||
size_t ret = 0; |
||||
|
||||
do { |
||||
clearerr(stream); |
||||
ret += fwrite((char *)ptr + (ret * size), size, nmemb - ret, stream); |
||||
} while (ret < nmemb && ferror(stream) && errno == EINTR); |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
/*
|
||||
* Convert Ethernet address string representation to binary data |
||||
* @param a string in xx:xx:xx:xx:xx:xx notation |
||||
* @param e binary data |
||||
* @return TRUE if conversion was successful and FALSE otherwise |
||||
*/ |
||||
int |
||||
ether_atoe(const char *a, unsigned char *e) |
||||
{ |
||||
char *c = (char *) a; |
||||
int i = 0; |
||||
|
||||
memset(e, 0, ETHER_ADDR_LEN); |
||||
for (;;) { |
||||
e[i++] = (unsigned char) strtoul(c, &c, 16); |
||||
if (!*c++ || i == ETHER_ADDR_LEN) |
||||
break; |
||||
} |
||||
return (i == ETHER_ADDR_LEN); |
||||
} |
||||
|
||||
/*
|
||||
* Convert Ethernet address binary data to string representation |
||||
* @param e binary data |
||||
* @param a string in xx:xx:xx:xx:xx:xx notation |
||||
* @return a |
||||
*/ |
||||
char * |
||||
ether_etoa(const unsigned char *e, char *a) |
||||
{ |
||||
char *c = a; |
||||
int i; |
||||
|
||||
for (i = 0; i < ETHER_ADDR_LEN; i++) { |
||||
if (i) |
||||
*c++ = ':'; |
||||
c += sprintf(c, "%02X", e[i] & 0xff); |
||||
} |
||||
return a; |
||||
} |
@ -0,0 +1,86 @@ |
||||
/*
|
||||
* Wireless network adapter utilities |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
#include <string.h> |
||||
|
||||
#include <typedefs.h> |
||||
#include <wlutils.h> |
||||
|
||||
int |
||||
wl_probe(char *name) |
||||
{ |
||||
int ret, val; |
||||
|
||||
/* Check interface */ |
||||
if ((ret = wl_ioctl(name, WLC_GET_MAGIC, &val, sizeof(val)))) |
||||
return ret; |
||||
if (val != WLC_IOCTL_MAGIC) |
||||
return -1; |
||||
if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val)))) |
||||
return ret; |
||||
if (val > WLC_IOCTL_VERSION) |
||||
return -1; |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
int |
||||
wl_set_val(char *name, char *var, void *val, int len) |
||||
{ |
||||
char buf[128]; |
||||
int buf_len; |
||||
|
||||
/* check for overflow */ |
||||
if ((buf_len = strlen(var)) + 1 + len > sizeof(buf)) |
||||
return -1; |
||||
|
||||
strcpy(buf, var); |
||||
buf_len += 1; |
||||
|
||||
/* append int value onto the end of the name string */ |
||||
memcpy(&buf[buf_len], val, len); |
||||
buf_len += len; |
||||
|
||||
return wl_ioctl(name, WLC_SET_VAR, buf, buf_len); |
||||
} |
||||
|
||||
int |
||||
wl_get_val(char *name, char *var, void *val, int len) |
||||
{ |
||||
char buf[128]; |
||||
int ret; |
||||
|
||||
/* check for overflow */ |
||||
if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf)) |
||||
return -1; |
||||
|
||||
strcpy(buf, var); |
||||
if ((ret = wl_ioctl(name, WLC_GET_VAR, buf, sizeof(buf)))) |
||||
return ret; |
||||
|
||||
memcpy(val, buf, len); |
||||
return 0; |
||||
} |
||||
|
||||
int |
||||
wl_set_int(char *name, char *var, int val) |
||||
{ |
||||
return wl_set_val(name, var, &val, sizeof(val)); |
||||
} |
||||
|
||||
int |
||||
wl_get_int(char *name, char *var, int *val) |
||||
{ |
||||
return wl_get_val(name, var, val, sizeof(*val)); |
||||
} |
||||
|
@ -0,0 +1,77 @@ |
||||
/*
|
||||
* Wireless network adapter utilities (linux-specific) |
||||
* |
||||
* Copyright 2004, Broadcom Corporation |
||||
* All Rights Reserved. |
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY |
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM |
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS |
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. |
||||
* |
||||
* $Id$ |
||||
*/ |
||||
|
||||
#include <stdio.h> |
||||
#include <unistd.h> |
||||
#include <string.h> |
||||
#include <errno.h> |
||||
#include <sys/ioctl.h> |
||||
#include <net/if.h> |
||||
|
||||
#include <typedefs.h> |
||||
#include <wlioctl.h> |
||||
#include <wlutils.h> |
||||
|
||||
int |
||||
wl_ioctl(char *name, int cmd, void *buf, int len) |
||||
{ |
||||
struct ifreq ifr; |
||||
wl_ioctl_t ioc; |
||||
int ret = 0; |
||||
int s; |
||||
|
||||
/* open socket to kernel */ |
||||
if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { |
||||
perror("socket"); |
||||
return errno; |
||||
} |
||||
|
||||
/* do it */ |
||||
ioc.cmd = cmd; |
||||
ioc.buf = buf; |
||||
ioc.len = len; |
||||
strncpy(ifr.ifr_name, name, IFNAMSIZ); |
||||
ifr.ifr_data = (caddr_t) &ioc; |
||||
if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0) |
||||
if (cmd != WLC_GET_MAGIC) |
||||
perror(ifr.ifr_name); |
||||
|
||||
/* cleanup */ |
||||
close(s); |
||||
return ret; |
||||
} |
||||
|
||||
int |
||||
wl_hwaddr(char *name, unsigned char *hwaddr) |
||||
{ |
||||
struct ifreq ifr; |
||||
int ret = 0; |
||||
int s; |
||||
|
||||
/* open socket to kernel */ |
||||
if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { |
||||
perror("socket"); |
||||
return errno; |
||||
} |
||||
|
||||
/* do it */ |
||||
strncpy(ifr.ifr_name, name, IFNAMSIZ); |
||||
if ((ret = ioctl(s, SIOCGIFHWADDR, &ifr)) == 0) |
||||
memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN); |
||||
|
||||
/* cleanup */ |
||||
close(s); |
||||
return ret; |
||||
}
|
||||
|
@ -1,132 +0,0 @@ |
||||
#############################################################
|
||||
#
|
||||
# linksys and openwrt tools
|
||||
#
|
||||
#############################################################
|
||||
|
||||
LINKSYS_TGZ_SITE=http://openwrt.openbsd-geek.de
|
||||
LINKSYS_KERNEL_INCLUDE=$(BUILD_DIR)/linksys-kernel
|
||||
|
||||
# shared library stuff extracted from linksys firmware GPL sourcetree
|
||||
# WRT54GS_3_37_2_1109_US
|
||||
LINKSYS_SHARED_TGZ=linksys-shared.tar.gz
|
||||
LINKSYS_SHARED_DIR=$(BUILD_DIR)/linksys-shared
|
||||
LINKSYS_SHARED_TARGET_BINARY:=usr/lib/libshared.so
|
||||
|
||||
$(DL_DIR)/$(LINKSYS_SHARED_TGZ): |
||||
$(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_SHARED_TGZ)
|
||||
|
||||
$(LINKSYS_SHARED_DIR)/.source: $(DL_DIR)/$(LINKSYS_SHARED_TGZ) |
||||
zcat $(DL_DIR)/$(LINKSYS_SHARED_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
touch $(LINKSYS_SHARED_DIR)/.source
|
||||
|
||||
$(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY): $(LINKSYS_SHARED_DIR)/.source |
||||
$(SED) 's/#include.*/#include <cy_conf.h>/g;' $(LINKSYS_SHARED_DIR)/utils.h
|
||||
$(MAKE) -C $(LINKSYS_SHARED_DIR) -f Makefile-openwrt \
|
||||
INSTALLDIR=$(TARGET_DIR) \
|
||||
CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
|
||||
CFLAGS="$(TARGET_CFLAGS) -I$(LINKSYS_KERNEL_INCLUDE)/include \
|
||||
-I$(LINKSYS_KERNEL_INCLUDE) -Wall -I." \
|
||||
install
|
||||
|
||||
linksys-shared: $(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY) |
||||
|
||||
linksys-shared-clean: |
||||
-$(MAKE) -C $(LINKSYS_SHARED_DIR) clean
|
||||
|
||||
linksys-shared-dirclean: |
||||
rm -rf $(LINKSYS_SHARED_DIR)
|
||||
|
||||
# nvram tool extracted from linksys firmware GPL sourcetree
|
||||
# WRT54GS_3_37_2_1109_US
|
||||
LINKSYS_NVRAM_TGZ=linksys-nvram.tar.gz
|
||||
LINKSYS_NVRAM_DIR=$(BUILD_DIR)/linksys-nvram
|
||||
LINKSYS_NVRAM_TARGET_BINARY:=usr/sbin/nvram
|
||||
|
||||
$(DL_DIR)/$(LINKSYS_NVRAM_TGZ): |
||||
$(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_NVRAM_TGZ)
|
||||
|
||||
$(LINKSYS_NVRAM_DIR)/.source: $(DL_DIR)/$(LINKSYS_NVRAM_TGZ) |
||||
zcat $(DL_DIR)/$(LINKSYS_NVRAM_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
touch $(LINKSYS_NVRAM_DIR)/.source
|
||||
|
||||
$(TARGET_DIR)/$(LINKSYS_NVRAM_TARGET_BINARY): $(LINKSYS_NVRAM_DIR)/.source |
||||
$(MAKE) -C $(LINKSYS_NVRAM_DIR) INSTALLDIR=$(TARGET_DIR) \
|
||||
CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
|
||||
CFLAGS="$(TARGET_CFLAGS) -I. -I$(LINKSYS_KERNEL_INCLUDE)/include \
|
||||
-I$(LINKSYS_KERNEL_INCLUDE) -I$(LINKSYS_SHARED_DIR) -Wall" install
|
||||
|
||||
linksys-nvram: $(TARGET_DIR)/$(LINKSYS_NVRAM_TARGET_BINARY) |
||||
|
||||
linksys-nvram-clean: |
||||
-$(MAKE) -C $(LINKSYS_NVRAM_BUILD_DIR) clean
|
||||
|
||||
linksys-nvram-dirclean: |
||||
rm -rf $(LINKSYS_NVRAM_DIR)
|
||||
|
||||
# wlconf tool extracted from linksys firmware GPL sourcetree
|
||||
# WRT54GS_3_37_2_1109_US
|
||||
LINKSYS_WLCONF_TGZ=linksys-wlconf.tar.gz
|
||||
LINKSYS_WLCONF_DIR=$(BUILD_DIR)/linksys-wlconf
|
||||
LINKSYS_WLCONF_TARGET_BINARY:=usr/sbin/wlconf
|
||||
|
||||
$(DL_DIR)/$(LINKSYS_WLCONF_TGZ): |
||||
$(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_WLCONF_TGZ)
|
||||
|
||||
$(LINKSYS_WLCONF_DIR)/.source: $(DL_DIR)/$(LINKSYS_WLCONF_TGZ) |
||||
zcat $(DL_DIR)/$(LINKSYS_WLCONF_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
touch $(LINKSYS_WLCONF_DIR)/.source
|
||||
|
||||
$(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY): $(LINKSYS_WLCONF_DIR)/.source |
||||
$(MAKE) -C $(LINKSYS_WLCONF_DIR) INSTALLDIR=$(TARGET_DIR) \
|
||||
CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
|
||||
CFLAGS="$(TARGET_CFLAGS) -I. -I$(LINKSYS_KERNEL_INCLUDE)/include \
|
||||
-I$(LINKSYS_KERNEL_INCLUDE) \
|
||||
-I$(LINKSYS_SHARED_DIR) \
|
||||
-I$(LINKSYS_NVRAM_DIR) \
|
||||
-Wall -DOPENWRT_WLCONF" \
|
||||
LDFLAGS="-lnvram -lshared -L$(BUILD_DIR)/linksys-shared -L$(BUILD_DIR)/linksys-nvram" \
|
||||
install
|
||||
|
||||
linksys-wlconf: $(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY) |
||||
|
||||
linksys-wlconf-clean: |
||||
-$(MAKE) -C $(LINKSYS_WLCONF_BUILD_DIR) clean
|
||||
|
||||
linksys-wlconf-dirclean: |
||||
rm -rf $(LINKSYS_WLCONF_DIR)
|
||||
|
||||
# mtd tool
|
||||
OPENWRT_MTD_SOURCE=./mtd.c
|
||||
OPENWRT_MTD_TARGET_BINARY:=sbin/mtd
|
||||
|
||||
$(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY): |
||||
$(TARGET_CC) -o $@ $(OPENWRT_MTD_SOURCE)
|
||||
$(STRIP) $@
|
||||
|
||||
|
||||
openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY) |
||||
|
||||
openwrt-mtd-clean: |
||||
rm $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY)
|
||||
|
||||
# jffs2root tool
|
||||
OPENWRT_JFFS2ROOT_SOURCE=./jffs2root.c
|
||||
OPENWRT_JFFS2ROOT_TARGET_BINARY:=sbin/jffs2root
|
||||
|
||||
$(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY): |
||||
$(TARGET_CC) -o $@ $(OPENWRT_JFFS2ROOT_SOURCE)
|
||||
$(STRIP) $@
|
||||
|
||||
openwrt-jffs2root: $(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY) |
||||
|
||||
openwrt-jffs2root-clean: |
||||
rm $(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY)
|
||||
|
||||
|
||||
linksys: linksys-shared linksys-nvram linksys-wlconf |
||||
|
||||
openwrt: linksys openwrt-mtd openwrt-jffs2root |
||||
|
||||
openwrt-dirclean: linksys-shared-dirclean linksys-nvram-dirclean linksys-wlconf-dirclean |
||||
|
Loading…
Reference in new issue