parent
5177814ade
commit
78699c2e51
@ -0,0 +1,69 @@ |
||||
config interface loopback |
||||
option ifname lo |
||||
option proto static |
||||
option ipaddr 127.0.0.1 |
||||
option netmask 255.0.0.0 |
||||
|
||||
config interface lan |
||||
option ifname eth0.1 |
||||
option type bridge |
||||
option proto static |
||||
option ipaddr 192.168.1.1 |
||||
option netmask 255.255.255.0 |
||||
|
||||
config interface wan |
||||
option ifname eth1 |
||||
option proto dhcp |
||||
|
||||
config switch |
||||
option name rtl8366s |
||||
option reset 1 |
||||
option enable_vlan 1 |
||||
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms |
||||
option blinkrate 2 |
||||
|
||||
config switch_vlan |
||||
option device rtl8366s |
||||
option vlan 1 |
||||
option ports "0 1 2 3 5t" |
||||
|
||||
config switch_port |
||||
# Port 1 controls the GREEN configuration of LEDs for |
||||
# the switch and the section does not correspond to a real |
||||
# switch port. |
||||
# |
||||
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; |
||||
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; |
||||
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; |
||||
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); |
||||
# 14: Link (master); 15: separate register |
||||
|
||||
option device rtl8366s |
||||
option port 1 |
||||
option led 6 |
||||
|
||||
config switch_port |
||||
# Port 2 controls the ORANGE configuration of LEDs for |
||||
# the switch and the section does not correspond to a real |
||||
# switch port. |
||||
# |
||||
# See the key above for switch port 1 for the meaning of the |
||||
# 'led' setting below. |
||||
|
||||
option device rtl8366s |
||||
option port 2 |
||||
option led 9 |
||||
|
||||
config switch_port |
||||
# Port 5 controls the configuration of the WAN LED and the |
||||
# section does not correspond to a real switch port. |
||||
# |
||||
# To toggle the use of green or orange LEDs for the WAN port, |
||||
# see the LED setting for wndr3700:green:wan in /etc/config/system. |
||||
# |
||||
# See the key above for switch port 1 for the meaning of the |
||||
# 'led' setting below. |
||||
|
||||
option device rtl8366s |
||||
option port 5 |
||||
option led 2 |
Loading…
Reference in new issue