Document the IPv6 connectivity with OpenWrt.

SVN-Revision: 9452
master
Florian Fainelli 17 years ago
parent da7afd8577
commit 773c31afdc
  1. 46
      docs/network.tex
  2. 2
      docs/wireless.tex

@ -114,3 +114,49 @@ config switch "eth0"
option vlan1 "0 5"
option vlan2 "4 5"
\end{Verbatim}
\subsubsection{Setting up IPv6 connectivity}
OpenWrt supports IPv6 connectivity using PPP, Tunnel brokers or static
assignment.
If you use PPP, IPv6 will be setup using IP6CP and there is nothing to
configure.
To setup an IPv6 tunnel to a tunnel broker, you have to edit the
\texttt{/etc/config/6tunnel} file and change the settings accordingly :
\begin{Verbatim}
config 6tunnel
option tnlifname 'sixbone'
option remoteip4 '1.0.0.1'
option localip4 '1.0.0.2'
option localip6 '2001::DEAD::BEEF::1'
option prefix '/64'
\end{Verbatim}
\begin{itemize}
\item{\texttt{'tnlifname'}:}
Set the interface name of the IPv6 in IPv4 tunnel
\item{\texttt{'remoteip4'}:}
IP address of the remote end to establish the 6in4 tunnel.
This address is given by the tunnel broker
\item{\texttt{'localip4'}:}
IP address of your router to establish the 6in4 tunnel.
It will usually match your WAN IP address.
\item{\texttt{'localip6'}:}
IPv6 address to setup on your tunnel side
This address is given by the tunnel broker
\item{\texttt{'prefix'}:}
IPv6 prefix to setup on the LAN.
\end{itemize}
IPv6 static addressing is also supported using a similar setup as
IPv4 but with the \texttt{ip6} prefixing (when applicable).
\begin{Verbatim}
config interface "lan"
option ifname "eth0"
option proto "static"
option ip6addr "fe80::200:ff:fe00:0/64"
\end{Verbatim}

@ -7,7 +7,7 @@ Each wireless driver has its own configuration script in \texttt{/lib/wifi/drive
driver specific options and configurations. This script is also calling driver specific binaries like wlc for
Broadcom, or hostapd and wpa\_supplicant for atheros.
The reason for using such architecture, is that it abstracts the driver configuration
The reason for using such architecture, is that it abstracts the driver configuration.
\paragraph{Generic Broadcom wireless config:}

Loading…
Cancel
Save