hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

define more SWITCH/MPMC constants

Browse Source 
SVN-Revision: 8704
master
Gabor Juhos 17 years ago
parent 1937e8382a
commit 6ea4ccc158
2 changed files with 177 additions and 40 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 7
      target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h
  2. 210
      target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h

7
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h
Unescape View File

@ -26,6 +26,11 @@
#ifndef _ADM5120_MPMC_H_
#define _ADM5120_MPMC_H_
#define MPMC_READ_REG(r) __raw_readl( \
(void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
#define MPMC_WRITE_REG(r, v) __raw_writel((v), \
(void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
#define MPMC_REG_CTRL 0x0000
#define MPMC_REG_STATUS 0x0004
#define MPMC_REG_CONF 0x0008
@ -46,7 +51,9 @@
#define MPMC_REG_SC2 0x0240
#define MPMC_REG_SC3 0x0260
/* Control register bits */
#define MPMC_CTRL_AM ( 1 << 1 )
#define MPMC_CTRL_DWB ( 1 << 3 )
/* Dynamic Control register bits */
#define MPMC_DC_CE ( 1 << 0 )

210
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
Unescape View File

@ -1,4 +1,6 @@
/*
* $Id$
*
* ADM5120 ethernet switch definitions
*
* This header file defines the hardware registers of the ADM5120 SoC
@ -23,45 +25,63 @@
* Boston, MA 02110-1301, USA.
*/
#ifndef _ADM5120_SWITCH_H
#define _ADM5120_SWITCH_H
#ifndef _ADM5120_SWITCH_H_
#define _ADM5120_SWITCH_H_
#define BIT(at) (1 << (at))
#define BITMASK(len) ((1 << (len))-1)
#define ONEBIT(at) (1 << (at))
#define SW_READ_REG(r) __raw_readl( \
(void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r)
#define SW_WRITE_REG(r, v) __raw_writel((v), \
(void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r)
/* Switch register offsets */
#define SWITCH_REG_CODE 0x0000
#define SWITCH_REG_SOFT_RESET 0x0004
#define SWITCH_REG_MEMCTRL 0x001C
#define SWITCH_REG_CPUP_CONF 0x0024
#define SWITCH_REG_PORT_CONF0 0x0028
#define SWITCH_REG_PORT_CONF1 0x002C
#define SWITCH_REG_PORT_CONF2 0x0030
#define SWITCH_REG_VLAN_G1 0x0040
#define SWITCH_REG_VLAN_G2 0x0044
#define SWITCH_REG_SEND_TRIG 0x0048
#define SWITCH_REG_MAC_WT0 0x0058
#define SWITCH_REG_MAC_WT1 0x005C
#define SWITCH_REG_PHY_CNTL0 0x0068
#define SWITCH_REG_PHY_CNTL1 0x006C
#define SWITCH_REG_PHY_CNTL2 0x007C
#define SWITCH_REG_PHY_CNTL3 0x0080
#define SWITCH_REG_PRI_CNTL 0x0084
#define SWITCH_REG_INT_STATUS 0x00B0
#define SWITCH_REG_INT_MASK 0x00B4
#define SWITCH_REG_GPIO_CONF0 0x00B8
#define SWITCH_REG_GPIO_CONF2 0x00BC
#define SWITCH_REG_WDOG0 0x00C0
#define SWITCH_REG_WDOG1 0x00C4
#define SWITCH_REG_PHY_CNTL4 0x00A0
#define SWITCH_REG_SEND_HBADDR 0x00D0
#define SWITCH_REG_SEND_LBADDR 0x00D4
#define SWITCH_REG_RECV_HBADDR 0x00D8
#define SWITCH_REG_RECV_LBADDR 0x00DC
#define SWITCH_REG_TIMER_INT 0x00F0
#define SWITCH_REG_TIMER 0x00F4
#define SWITCH_REG_SOFT_RESET 0x0004 /* Soft Reset */
#define SWITCH_REG_BOOT_DONE 0x0008 /* Boot Done */
#define SWITCH_REG_SW_RESET 0x000C /* Switch Reset */
#define SWITCH_REG_PHY_STATUS 0x0014 /* PHY Status */
#define SWITCH_REG_MEMCTRL 0x001C /* Memory Control */
#define SWITCH_REG_CPUP_CONF 0x0024 /* CPU Port Configuration */
#define SWITCH_REG_PORT_CONF0 0x0028 /* Port Configuration 0 */
#define SWITCH_REG_PORT_CONF1 0x002C /* Port Configuration 1 */
#define SWITCH_REG_PORT_CONF2 0x0030 /* Port Configuration 2 */
#define SWITCH_REG_VLAN_G1 0x0040 /* VLAN group 1 */
#define SWITCH_REG_VLAN_G2 0x0044 /* VLAN group 2 */
#define SWITCH_REG_SEND_TRIG 0x0048 /* Send Trigger */
#define SWITCH_REG_MAC_WT0 0x0058 /* MAC Write Address 0 */
#define SWITCH_REG_MAC_WT1 0x005C /* MAC Write Address 1 */
#define SWITCH_REG_BW_CNTL0 0x0060 /* Bandwidth Control 0 */
#define SWITCH_REG_BW_CNTL1 0x0064 /* Bandwidth Control 1 */
#define SWITCH_REG_PHY_CNTL0 0x0068 /* PHY Control 0 */
#define SWITCH_REG_PHY_CNTL1 0x006C /* PHY Control 1 */
#define SWITCH_REG_PORT_TH 0x0078 /* Port Threshold */
#define SWITCH_REG_PHY_CNTL2 0x007C /* PHY Control 2 */
#define SWITCH_REG_PHY_CNTL3 0x0080 /* PHY Control 3 */
#define SWITCH_REG_PRI_CNTL 0x0084 /* Priority Control */
#define SWITCH_REG_PHY_CNTL4 0x00A0 /* PHY Control 4 */
#define SWITCH_REG_EMPTY_CNT 0x00A4 /* Empty Count */
#define SWITCH_REG_PORT_CNTLS 0x00A8 /* Port Control Select */
#define SWITCH_REG_PORT_CNTL 0x00AC /* Port Control */
#define SWITCH_REG_INT_STATUS 0x00B0 /* Interrupt Status */
#define SWITCH_REG_INT_MASK 0x00B4 /* Interrupt Mask */
#define SWITCH_REG_GPIO_CONF0 0x00B8 /* GPIO Configuration 0 */
#define SWITCH_REG_GPIO_CONF2 0x00BC /* GPIO Configuration 1 */
#define SWITCH_REG_WDOG0 0x00C0 /* Watchdog 0 */
#define SWITCH_REG_WDOG1 0x00C4 /* Watchdog 1 */
#define SWITCH_REG_SHDA 0x00D0 /* Send High Descriptors Address */
#define SWITCH_REG_SLDA 0x00D4 /* Send Low Descriptors Address */
#define SWITCH_REG_RHDA 0x00D8 /* Receive High Descriptor Address */
#define SWITCH_REG_RLDA 0x00DC /* Receive Low Descriptor Address */
#define SWITCH_REG_SHWA 0x00E0 /* Send High Working Address */
#define SWITCH_REG_SLWA 0x00E4 /* Send Low Working Address */
#define SWITCH_REG_RHWA 0x00E8 /* Receive High Working Address */
#define SWITCH_REG_RLWA 0x00EC /* Receive Low Working Address */
#define SWITCH_REG_TIMER_INT 0x00F0 /* Timer */
#define SWITCH_REG_TIMER 0x00F4 /* Timer Interrupt */
#define SWITCH_REG_PORT0_LED 0x0100
#define SWITCH_REG_PORT1_LED 0x0104
@ -79,7 +99,7 @@
#define CODE_CLKS_200 1 /* 200 MHz */
#define CODE_CLKS_225 2 /* 225 MHz */
#define CODE_CLKS_250 3 /* 250 MHz */
#define CODE_NAB ONEBIT(24) /* NAND boot */
#define CODE_NAB BIT(24) /* NAND boot */
#define CODE_PK_MASK BITMASK(1) /* Package type */
#define CODE_PK_SHIFT 29
#define CODE_PK_BGA 0 /* BGA package */
@ -92,7 +112,7 @@
#define MEMCTRL_SDRS_16M 0x03
#define MEMCTRL_SDRS_64M 0x04
#define MEMCTRL_SDRS_128M 0x05
#define MEMCTRL_SDR1_ENABLE ONEBIT(5) /* enable SDRAM bank 1 */
#define MEMCTRL_SDR1_ENABLE BIT(5) /* enable SDRAM bank 1 */
#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */
#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */
@ -103,6 +123,91 @@
#define MEMCTRL_SRS_2M 0x03 /* 2MB */
#define MEMCTRL_SRS_4M 0x04 /* 4MB */
/* Port bits used in various registers */
#define SWITCH_PORT_PHY0 BIT(0)
#define SWITCH_PORT_PHY1 BIT(1)
#define SWITCH_PORT_PHY2 BIT(2)
#define SWITCH_PORT_PHY3 BIT(3)
#define SWITCH_PORT_PHY4 BIT(4)
#define SWITCH_PORT_MII BIT(5)
#define SWITCH_PORT_CPU BIT(6)
/* Port bit shorthands */
#define SWITCH_PORTS_PHY 0x1F /* phy ports */
#define SWITCH_PORTS_NOCPU 0x3F /* physical ports */
#define SWITCH_PORTS_ALL 0x7F /* all ports */
/* CPUP_CONF register bits */
#define CPUP_CONF_DCPUP BIT(0) /* Disable CPU port */
#define CPUP_CONF_CRCP BIT(1) /* CRC padding from CPU */
#define CPUP_CONF_BTM BIT(2) /* Bridge Testing Mode */
/* PORT_CONF0 register bits */
#define PORT_CONF0_DP_SHIFT 0 /* Disable Port */
#define PORT_CONF0_EMCP_SHIFT 8 /* Enable All MC Packets */
#define PORT_CONF0_BP_SHIFT 16 /* Enable Back Pressure */
/* PORT_CONF1 register bits */
#define PORT_CONF1_DISL_SHIFT 0 /* Disable Learning */
#define PORT_CONF1_BS_SHIFT 6 /* Blocking State */
#define PORT_CONF1_BM_SHIFT 12 /* Blocking Mode */
/* SEND_TRIG register bits */
#define SEND_TRIG_STL BIT(0) /* Send Trigger Low */
#define SEND_TRIG_STH BIT(1) /* Send Trigger High */
/* BW_CNTL0/BW_CNTL1 register bits */
#define BW_CNTL_DISABLE 0x00
#define BW_CNTL_64K 0x01
#define BW_CNTL_128K 0x02
#define BW_CNTL_256K 0x03
#define BW_CNTL_512K 0x04
#define BW_CNTL_1M 0x05
#define BW_CNTL_4M 0x06
#define BW_CNTL_10M 0x07
#define P4TBC_SHIFT 0
#define P4RBC_SHIFT 4
#define P5TBC_SHIFT 8
#define P5RBC_SHIFT 12
/* PHY_CNTL0 register bits */
#define PHY_CNTL0_PHYA_MASK BITMASK(5)
#define PHY_CNTL0_PHYR_MASK BITMASK(5)
#define PHY_CNTL0_PHYR_SHIFT 8
#define PHY_CNTL0_WC BIT(13) /* Write Command */
#define PHY_CNTL0_RC BIT(14) /* Read Command */
#define PHY_CNTL0_WTD_MASK BIT(16) /* Read Command */
#define PHY_CNTL0_WTD_SHIFT 16
/* PHY_CNTL1 register bits */
#define PHY_CNTL1_WOD BIT(0) /* Write Operation Done */
#define PHY_CNTL1_ROD BIT(1) /* Read Operation Done */
#define PHY_CNTL1_RD_MASK BITMASK(16)
#define PHY_CNTL1_RD_SHIFT 16
/* PHY_CNTL2 register bits */
#define PHY_CNTL2_ANE_SHIFT 0 /* Auto Negotiation Enable */
#define PHY_CNTL2_SC_SHIFT 5 /* Speed Control */
#define PHY_CNTL2_DC_SHIFT 10 /* Duplex Control */
#define PHY_CNTL2_FNCV_SHIFT 15 /* Recommended FC Value */
#define PHY_CNTL2_PHYR_SHIFT 20 /* PHY reset */
#define PHY_CNTL2_AMDIX_SHIFT 25 /* Auto MDIX enable */
/* PHY_CNTL2_RMAE is bad in datasheet */
#define PHY_CNTL2_RMAE BIT(31) /* Recommended MCC Average enable */
/* PORT_TH register bits */
#define PORT_TH_PPT_MASK BITMASK(8) /* Per Port Threshold */
#define PORT_TH_CPUT_SHIFT 8 /* CPU Port Buffer Threshold */
#define PORT_TH_CPUT_MASK BITMASK(8)
#define PORT_TH_CPUHT_SHIFT 16 /* CPU Hold Threshold */
#define PORT_TH_CPUHT_MASK BITMASK(8)
#define PORT_TH_CPURT_SHIFT 24 /* CPU Release Threshold */
#define PORT_TH_CPURT_MASK BITMASK(8)
/* EMPTY_CNT register bits */
#define EMPTY_CNT_EBGB_MASK BITMASK(9) /* Empty Blocks in the Global Buffer */
/* GPIO_CONF0 register bits */
#define GPIO_CONF0_MASK BITMASK(8)
#define GPIO_CONF0_IM_SHIFT 0
@ -114,14 +219,39 @@
#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT)
#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT)
/* INT_STATUS/INT_MASK register bits */
#define SWITCH_INT_SHD BIT(0) /* Send High Done */
#define SWITCH_INT_SLD BIT(1) /* Send Low Done */
#define SWITCH_INT_RHD BIT(2) /* Receive High Done */
#define SWITCH_INT_RLD BIT(3) /* Receive Low Done */
#define SWITCH_INT_HDF BIT(4) /* High Descriptor Full */
#define SWITCH_INT_LDF BIT(5) /* Low Descriptor Full */
#define SWITCH_INT_P0QF BIT(6) /* Port0 Queue Full */
#define SWITCH_INT_P1QF BIT(7) /* Port1 Queue Full */
#define SWITCH_INT_P2QF BIT(8) /* Port2 Queue Full */
#define SWITCH_INT_P3QF BIT(9) /* Port3 Queue Full */
#define SWITCH_INT_P4QF BIT(10) /* Port4 Queue Full */
#define SWITCH_INT_P5QF BIT(11) /* Port5 Queue Full */
#define SWITCH_INT_CPQF BIT(13) /* CPU Queue Full */
#define SWITCH_INT_GQF BIT(14) /* Global Queue Full */
#define SWITCH_INT_MD BIT(15) /* Must Drop */
#define SWITCH_INT_BCS BIT(16) /* BC Storm */
#define SWITCH_INT_PSC BIT(18) /* Port Status Change */
#define SWITCH_INT_ID BIT(19) /* Intruder Detected */
#define SWITCH_INT_W0TE BIT(20) /* Watchdog 0 Timer Expired */
#define SWITCH_INT_W1TE BIT(21) /* Watchdog 1 Timer Expired */
#define SWITCH_INT_RDE BIT(22) /* Receive Descriptor Error */
#define SWITCH_INT_SDE BIT(23) /* Send Descriptor Error */
#define SWITCH_INT_CPUH BIT(24) /* CPU Hold */
/* TIMER_INT register bits */
#define TIMER_INT_TOS ONEBIT(1) /* time-out status */
#define TIMER_INT_TOM ONEBIT(16) /* mask time-out interrupt */
#define TIMER_INT_TOS BIT(0) /* time-out status */
#define TIMER_INT_TOM BIT(16) /* mask time-out interrupt */
/* TIMER register bits */
#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */
#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */
#define TIMER_TE ONEBIT(16) /* timer enable bit */
#define TIMER_TE BIT(16) /* timer enable bit */
/* PORTx_LED register bits */
#define LED_MODE_MASK BITMASK(4)
@ -145,4 +275,4 @@
#define LED1_IV_SHIFT 13 /* LED1 input value shift */
#define LED2_IV_SHIFT 14 /* LED2 input value shift */
#endif /* _ADM5120_SWITCH_H */
#endif /* _ADM5120_SWITCH_H_ */

Write Preview
Loading…
Cancel
Save