This is based on a patch from armbian: https://github.com/armbian/build/blob/master/patch/kernel/sunxi-next/sunxi-add-orangepi-zero-plus.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>master
parent
718e5cd1cf
commit
6be73c07db
@ -0,0 +1,193 @@ |
||||
--- a/arch/arm64/boot/dts/allwinner/Makefile
|
||||
+++ b/arch/arm64/boot/dts/allwinner/Makefile
|
||||
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-s
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
|
||||
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
|
||||
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
|
||||
@@ -0,0 +1,180 @@
|
||||
+/*
|
||||
+ * Copyright (C) 2016 ARM Ltd.
|
||||
+ *
|
||||
+ * This file is dual-licensed: you can use it either under the terms
|
||||
+ * of the GPL or the X11 license, at your option. Note that this dual
|
||||
+ * licensing only applies to this file, and not this project as a
|
||||
+ * whole.
|
||||
+ *
|
||||
+ * a) This file is free software; you can redistribute it and/or
|
||||
+ * modify it under the terms of the GNU General Public License as
|
||||
+ * published by the Free Software Foundation; either version 2 of the
|
||||
+ * License, or (at your option) any later version.
|
||||
+ *
|
||||
+ * This file is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ * Or, alternatively,
|
||||
+ *
|
||||
+ * b) Permission is hereby granted, free of charge, to any person
|
||||
+ * obtaining a copy of this software and associated documentation
|
||||
+ * files (the "Software"), to deal in the Software without
|
||||
+ * restriction, including without limitation the rights to use,
|
||||
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
+ * sell copies of the Software, and to permit persons to whom the
|
||||
+ * Software is furnished to do so, subject to the following
|
||||
+ * conditions:
|
||||
+ *
|
||||
+ * The above copyright notice and this permission notice shall be
|
||||
+ * included in all copies or substantial portions of the Software.
|
||||
+ *
|
||||
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
+ * OTHER DEALINGS IN THE SOFTWARE.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include "sun50i-h5.dtsi"
|
||||
+
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+#include <dt-bindings/pinctrl/sun4i-a10.h>
|
||||
+
|
||||
+/ {
|
||||
+ model = "Xunlong Orange Pi Zero Plus";
|
||||
+ compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
|
||||
+
|
||||
+ reg_vcc3v3: vcc3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ };
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &emac;
|
||||
+ ethernet1 = &rtl8189ftv;
|
||||
+ serial0 = &uart0;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ pwr {
|
||||
+ label = "orangepi:green:pwr";
|
||||
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
|
||||
+ default-state = "on";
|
||||
+ };
|
||||
+
|
||||
+ status {
|
||||
+ label = "orangepi:red:status";
|
||||
+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ reg_gmac_3v3: gmac-3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "gmac-3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ startup-delay-us = <100000>;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ reg_usb0_vbus: usb0-vbus {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "usb0-vbus";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&ehci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&emac {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emac_rgmii_pins>;
|
||||
+ phy-supply = <®_gmac_3v3>;
|
||||
+ phy-handle = <&ext_rgmii_phy>;
|
||||
+ phy-mode = "rgmii";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&external_mdio {
|
||||
+ ext_rgmii_phy: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mmc0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ bus-width = <4>;
|
||||
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mmc1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc1_pins_a>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ /*
|
||||
+ * Explicitly define the sdio device, so that we can add an ethernet
|
||||
+ * alias for it (which e.g. makes u-boot set a mac-address).
|
||||
+ */
|
||||
+ rtl8189ftv: sdio_wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&ohci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart0_pins_a>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_otg {
|
||||
+ dr_mode = "peripheral";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbphy {
|
||||
+ /* USB Type-A ports' VBUS is always on */
|
||||
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
|
||||
+ status = "okay";
|
||||
+};
|
Loading…
Reference in new issue