hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

lantiq: Add support for the BT Home Hub 5A

Browse Source 
u-boot support depends on the next "upstream" version ([0]) from
Daniel Schwierzeck.
Since the installation process is quite complicated a "how to" was
added to the wiki: [1]

[0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next
[1] http://wiki.openwrt.org/toh/bt/homehub_v5a

V2: Use the correct PCI interrupt (fixes 2.4GHz wifi)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46223
master
John Crispin 10 years ago
parent 2748df1c98
commit 6bdd209f15
7 changed files with 360 additions and 2 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 51
      target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
  2. 2
      target/linux/lantiq/base-files/etc/uci-defaults/01_leds
  3. 8
      target/linux/lantiq/base-files/etc/uci-defaults/02_network
  4. 2
      target/linux/lantiq/base-files/lib/upgrade/platform.sh
  5. 287
      target/linux/lantiq/dts/BTHOMEHUBV5A.dts
  6. 3
      target/linux/lantiq/image/Makefile
  7. 9
      target/linux/lantiq/xrx200/profiles/bt.mk

51
target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
Unescape View File

@ -0,0 +1,51 @@
#!/bin/sh
# Based on ar71xx 11-ath10k-caldata and 10-rt2x00-eeprom
ath10k_caldata_die() {
echo "ath10k caldata: " "$*"
exit 1
}
ath10k_caldata_extract() {
local part=$1
local offset=$2
local mtd
. /lib/functions.sh
mtd=$(find_mtd_part $part)
[ -n "$mtd" ] || \
ath10k_caldata_die "no mtd device found for partition $part"
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=2116 || \
ath10k_caldata_die "failed to extract from $mtd"
}
ath10k_caldata_set_macaddr() {
local macaddr=$1
macaddr_2bin $macaddr | dd of=/lib/firmware/$FIRMWARE \
conv=notrunc bs=1 seek=6 count=6
}
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions.sh
. /lib/functions/system.sh
. /lib/functions/lantiq.sh
case "$FIRMWARE" in
"ath10k/cal-pci-0000:02:00.0.bin")
local board=$(lantiq_board_name)
case $board in
BTHOMEHUBV5A)
local lan_mac=$(mtd_get_mac_binary caldata 4364)
local wifi_mac=$(macaddr_add "$lan_mac" 3)
ath10k_caldata_extract "caldata" 20480
ath10k_caldata_set_macaddr $wifi_mac
;;
*)
ath10k_caldata_die "board $board is not supported yet"
;;
esac
;;
esac

2
target/linux/lantiq/base-files/etc/uci-defaults/01_leds
Unescape View File

@ -25,7 +25,7 @@ BTHOMEHUBV2B)
ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
ucidef_set_led_usbdev "usb" "usb" "soc:blue:phone" "1-1"
;;
BTHOMEHUBV3A)
BTHOMEHUBV3A|BTHOMEHUBV5A)
ucidef_set_led_default "power" "power" "soc:blue:power" "1"
ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"

8
target/linux/lantiq/base-files/etc/uci-defaults/02_network
Unescape View File

@ -169,6 +169,14 @@ BTHOMEHUBV2B|BTHOMEHUBV3A)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
BTHOMEHUBV5A)
lan_mac=$(mtd_get_mac_binary caldata 4364)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0.1'
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 6t"
;;
VGV7519)
lan_mac=$(mtd_get_mac_binary board_config 22)
wan_mac=$(macaddr_add "$lan_mac" 1)

2
target/linux/lantiq/base-files/lib/upgrade/platform.sh
Unescape View File

@ -7,7 +7,7 @@ platform_check_image() {
local board=$(lantiq_board_name)
case "$board" in
BTHOMEHUBV2B|BTHOMEHUBV3A|P2812HNUF* )
BTHOMEHUBV2B|BTHOMEHUBV3A|BTHOMEHUBV5A|P2812HNUF* )
nand_do_platform_check $board $1
return $?;
;;

287
target/linux/lantiq/dts/BTHOMEHUBV5A.dts
Unescape View File

@ -0,0 +1,287 @@
/dts-v1/;
/include/ "vr9.dtsi"
/ {
model = "BTHOMEHUBV5A - BT Home Hub 5A";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nand-parts@0 {
compatible = "gen_nand", "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "uboot-env";
reg = <0x40000 0x40000>;
};
caldata: partition@80000 {
label = "caldata";
reg = <0x80000 0x20000>;
read-only;
};
partition@a0000 {
label = "kernel";
reg = <0xa0000 0x200000>;
};
partition@2a0000 {
label = "ubi";
reg = <0x2a0000 0x7d60000>;
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
interrupt-parent = <&icu0>;
interrupts = <166 135 66 40 41 42 38>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain;
};
pcie_rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
lantiq,open-drain;
};
usb_vbus {
lantiq,pins = "io33";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
};
};
eth@E108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xE108000 0x3000 /* switch */
0xE10B100 0x70 /* mdio */
0xE10B1D8 0x30 /* mii */
0xE10B308 0x30 >; /* pmac */
interrupt-parent = <&icu0>;
interrupts = <73 72>;
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&caldata 0x110c>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
wan: interface@1 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mtd-mac-address = <&caldata 0x110c>;
mtd-mac-address-increment = <4>;
lantiq,wan;
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 0>;
};
pci@E105400 {
status = "okay";
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
gpio-reset = <&gpio 21 0>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&caldata 0x1000>;
ath,mac-offset = <0x110c>;
ath,mac-increment = <2>;
ath,pci-slot = <0xe>; /* 14 */
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 2 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio 25 1>;
linux,code = <0x211>;
};
restart {
label = "restart";
gpios = <&gpio 39 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
broadband-red {
label = "soc:red:broadband";
gpios = <&gpio 0 1>;
};
broadband-green {
label = "soc:green:broadband";
gpios = <&gpio 3 1>;
};
broadband-blue {
label = "soc:blue:broadband";
gpios = <&gpio 8 1>;
};
wireless-red {
label = "soc:red:wireless";
gpios = <&gpio 9 1>;
};
wireless-green {
label = "soc:green:wireless";
gpios = <&gpio 10 1>;
};
wireless-blue {
label = "soc:blue:wireless";
gpios = <&gpio 11 1>;
};
power-red {
label = "soc:red:power";
gpios = <&gpio 12 1>;
};
power-green {
label = "soc:green:power";
gpios = <&gpio 14 1>;
};
power-blue {
label = "soc:blue:power";
gpios = <&gpio 15 1>;
};
dimmed {
label = "dimmed";
gpios = <&gpio 19 0>;
};
};
};

3
target/linux/lantiq/image/Makefile
Unescape View File

@ -414,6 +414,9 @@ Image/Build/Profile/P2812HNUF3=$(call Image/BuildNAND/$(1),$(1),P2812HNUF3)
Image/BuildKernel/Profile/ARV7519RW22=$(call Image/BuildKernel/Template,ARV7519RW22,$(1))
Image/Build/Profile/ARV7519RW22=$(call Image/Build/$(1),$(1),ARV7519RW22)
Image/BuildKernel/Profile/BTHOMEHUBV5A=$(call Image/BuildKernel/Template,BTHOMEHUBV5A)
Image/Build/Profile/BTHOMEHUBV5A=$(call Image/BuildNAND/$(1),$(1),BTHOMEHUBV5A)
Image/BuildKernel/Profile/EASY80920NAND=$(call Image/BuildKernel/Template,EASY80920NAND)
Image/Build/Profile/EASY80920NAND=$(call Image/Build/$(1),$(1),EASY80920NAND)

9
target/linux/lantiq/xrx200/profiles/bt.mk
Unescape View File

@ -0,0 +1,9 @@
define Profile/BTHOMEHUBV5A
NAME:=BT Home Hub 5A
PACKAGES:=kmod-ath9k kmod-ath10k wpad-mini kmod-usb-dwc2
endef
BTHOMEHUBV5A_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
BTHOMEHUBV5A_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
$(eval $(call Profile,BTHOMEHUBV5A))
Write Preview
Loading…
Cancel
Save