hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ar71xx: fix MAC addresses on the DIR-825-B1 board

Browse Source 
Patch-by: Lukas Kuna

SVN-Revision: 28295
master
Gabor Juhos 13 years ago
parent e45d7d7006
commit 6ac4156136
1 changed files with 23 additions and 10 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 33
      target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c

33
target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
Unescape View File

@ -1,7 +1,7 @@
/*
* D-Link DIR-825 rev. B1 board support
*
* Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
* Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
*
* based on mach-wndr3700.c
*
@ -45,8 +45,8 @@
#define DIR825B1_CAL_LOCATION_0 0x1f661000
#define DIR825B1_CAL_LOCATION_1 0x1f665000
#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8
#define DIR825B1_MAC_LOCATION_1 0x2ffa8370
#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0
#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition dir825b1_partitions[] = {
@ -150,20 +150,35 @@ static struct platform_device dir825b1_rtl8366s_device = {
}
};
static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr)
{
int ret;
u8 *src = (u8 *)KSEG1ADDR(src_addr);
ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
&dest[0], &dest[1], &dest[2],
&dest[3], &dest[4], &dest[5]);
if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN);
}
static void __init dir825b1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1);
u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0);
dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1);
ar71xx_add_device_mdio(0x0);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 2);
ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2);
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac1, 3);
ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
@ -188,10 +203,8 @@ static void __init dir825b1_setup(void)
ap94_pci_setup_wmac_led_pin(0, 5);
ap94_pci_setup_wmac_led_pin(1, 5);
ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
(u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_0),
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
(u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1));
ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1,
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2);
}
MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",

Write Preview
Loading…
Cancel
Save