ipq40xx: Fix DTS status parameter values

The "Devicetree Specification, Release v0.2 - 2.3.4 status" [1] only allows
the "okay" value for an operational device. The "ok" value will be accepted
by the kernel but should be avoided.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts

@@ -60,7 +60,7 @@
 			compatible = "qcom,tcsr";
 			reg = <0x194b000 0x100>;
 			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "ok";
+			status = "okay";
 		};
 
 		tcsr@1949000 {
@@ -82,21 +82,21 @@
 		};
 
 		usb2: usb2@60f8800 {
-			status = "ok";
+			status = "okay";
 		};
 
 		serial@78af000 {
 			pinctrl-0 = <&serial_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		crypto@8e3a000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		watchdog@b017000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		ess-switch@c000000 {
@@ -183,13 +183,13 @@
 };
 
 &blsp_dma {
-	status = "ok";
+	status = "okay";
 };
 
 &spi_0 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	status = "ok";
+	status = "okay";
 	cs-gpios = <&tlmm 54 0>;
 
 	m25p80@0 {
@@ -203,7 +203,7 @@
 };
 
 &cryptobam {
-	status = "ok";
+	status = "okay";
 };
 
 &gmac0 {
@@ -223,7 +223,7 @@
 };
 
 &usb2_hs_phy {
-	status = "ok";
+	status = "okay";
 };
 
 &wifi0 {

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts

@@ -86,21 +86,21 @@
 		};
 
 		usb2@60f8800 {
-			status = "ok";
+			status = "okay";
 		};
 
 		serial@78af000 {
 			pinctrl-0 = <&serial_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		usb3@8af8800 {
-			status = "ok";
+			status = "okay";
 		};
 
 		crypto@8e3a000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		wifi@a000000 {
@@ -114,7 +114,7 @@
 		};
 
 		watchdog@b017000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		ess-switch@c000000 {
@@ -178,11 +178,11 @@
 };
 
 &cryptobam {
-	status = "ok";
+	status = "okay";
 };
 
 &blsp_dma {
-	status = "ok";
+	status = "okay";
 };
 
 &tlmm {
@@ -215,7 +215,7 @@
 &spi_0 { /* BLSP1 QUP1 */
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	status = "ok";
+	status = "okay";
 	cs-gpios = <&tlmm 54 0>,
 		   <&tlmm 59 0>;
 
@@ -302,13 +302,13 @@
 };
 
 &usb3_ss_phy {
-	status = "ok";
+	status = "okay";
 };
 
 &usb3_hs_phy {
-	status = "ok";
+	status = "okay";
 };
 
 &usb2_hs_phy {
-	status = "ok";
+	status = "okay";
 };

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi

@@ -94,13 +94,13 @@
 		};
 
 		blsp_dma: dma@7884000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		spi_0: spi@78b5000 {
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 			cs-gpios = <&tlmm 12 0>;
 
 			mx25l25635e@0 {
@@ -116,61 +116,61 @@
 			pinctrl-0 = <&i2c_0_pins>;
 			pinctrl-names = "default";
 
-			status = "ok";
+			status = "okay";
 		};
 
 		serial@78af000 {
 			pinctrl-0 = <&serial_0_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		serial@78b0000 {
 			pinctrl-0 = <&serial_1_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		usb3_ss_phy: ssphy@9a000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		usb3_hs_phy: hsphy@a6000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		usb3: usb3@8af8800 {
-			status = "ok";
+			status = "okay";
 		};
 
 		usb2_hs_phy: hsphy@a8000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		usb2: usb2@60f8800 {
-			status = "ok";
+			status = "okay";
 		};
 
 		cryptobam: dma@8e04000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		crypto@8e3a000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		watchdog@b017000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		qpic_bam: dma@7984000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		nand: qpic-nand@79b0000 {
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 	};
 };

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts

@@ -86,21 +86,21 @@
 		};
 
 		usb2@60f8800 {
-			status = "ok";
+			status = "okay";
 		};
 
 		serial@78af000 {
 			pinctrl-0 = <&serial_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		usb3@8af8800 {
-			status = "ok";
+			status = "okay";
 		};
 
 		crypto@8e3a000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		wifi@a000000 {
@@ -112,7 +112,7 @@
 		};
 
 		watchdog@b017000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		qca8075: ess-switch@c000000 {
@@ -214,17 +214,17 @@
 };
 
 &cryptobam {
-	status = "ok";
+	status = "okay";
 };
 
 &blsp_dma {
-	status = "ok";
+	status = "okay";
 };
 
 &spi_0 { /* BLSP1 QUP1 */
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	status = "ok";
+	status = "okay";
 	cs-gpios = <&tlmm 54 0>;
 
 	mx25l25635f@0 {
@@ -233,7 +233,7 @@
 		#size-cells = <0>;
 		reg = <0>;
 		spi-max-frequency = <24000000>;
-		status = "ok";
+		status = "okay";
 		m25p,fast-read;
 
 		partitions {
@@ -310,13 +310,13 @@
 };
 
 &usb3_ss_phy {
-	status = "ok";
+	status = "okay";
 };
 
 &usb3_hs_phy {
-	status = "ok";
+	status = "okay";
 };
 
 &usb2_hs_phy {
-	status = "ok";
+	status = "okay";
 };