ramips: Add support for ZBT-CPE102

- CPU: MT7620N 580MHz
- Flash: 8MB
- RAM: 64MB
- build-in minipcie slot for modem 3G/4G
- one ethernet port 10/100Mbps

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
master
Cezary Jackiewicz 8 years ago committed by John Crispin
parent 875cddd94c
commit 66aae9a271
  1. 3
      target/linux/ramips/base-files/etc/board.d/01_leds
  2. 1
      target/linux/ramips/base-files/etc/board.d/02_network
  3. 3
      target/linux/ramips/base-files/etc/diag.sh
  4. 3
      target/linux/ramips/base-files/lib/ramips.sh
  5. 1
      target/linux/ramips/base-files/lib/upgrade/platform.sh
  6. 118
      target/linux/ramips/dts/ZBT-CPE102.dts
  7. 7
      target/linux/ramips/image/mt7620.mk

@ -318,6 +318,9 @@ zbt-ape522ii)
ucidef_set_led_netdev "sys1" "wlan1" "$board:green:sys1" "wlan1" "tx rx"
ucidef_set_led_netdev "sys2" "wlan0" "$board:green:sys2" "wlan0" "tx rx"
;;
zbt-cpe102)
ucidef_set_led_default "power" "power" "$board:green:4g-0" "0"
;;
zbt-wa05)
ucidef_set_led_default "power" "power" "$board:blue:power" "1"
set_wifi_led "$board:blue:air"

@ -53,6 +53,7 @@ ramips_setup_interfaces()
w150m|\
widora-neo|\
wnce2001|\
zbt-cpe102|\
zte-q7)
ucidef_add_switch "switch0"
ucidef_add_switch_attr "switch0" "enable" "false"

@ -208,6 +208,9 @@ get_status_led() {
wrtnode)
status_led="wrtnode:blue:indicator"
;;
zbt-cpe102)
status_led="$board:green:4g-0"
;;
esac
}

@ -541,6 +541,9 @@ ramips_board_detect() {
*"ZBT-APE522II")
name="zbt-ape522ii"
;;
*"ZBT-CPE102")
name="zbt-cpe102"
;;
*"ZBT-WA05")
name="zbt-wa05"
;;

@ -160,6 +160,7 @@ platform_check_image() {
y1|\
y1s|\
zbt-ape522ii|\
zbt-cpe102|\
zbt-wa05|\
zbt-we826|\
zbt-wg2626|\

@ -0,0 +1,118 @@
/dts-v1/;
#include "mt7620n.dtsi"
/ {
compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc";
model = "Zbtlink ZBT-CPE102";
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
4g-0 {
label = "zbt-cpe102:green:4g-0";
gpios = <&gpio1 14 1>;
};
4g-1 {
label = "zbt-cpe102:green:4g-1";
gpios = <&gpio0 2 1>;
};
4g-2 {
label = "zbt-cpe102:green:4g-2";
gpios = <&gpio1 15 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
en25q64@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x760000>;
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "wllll";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "spi refclk", "wled";
ralink,function = "gpio";
};
};
};

@ -358,6 +358,13 @@ define Device/zbt-ape522ii
endef
TARGET_DEVICES += zbt-ape522ii
define Device/zbt-cpe102
DTS := ZBT-CPE102
DEVICE_TITLE := Zbtlink ZBT-CPE102
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += zbt-cpe102
define Device/zbt-wa05
DTS := ZBT-WA05
DEVICE_TITLE := Zbtlink ZBT-WA05

Loading…
Cancel
Save