brcm47xx: BCMA - Broadcom 2011 SDK Updates

I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't
noticed any obvious changes in behavior with them applied; but thought I
should at least pass them on.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34670

target/linux/brcm47xx/patches-3.6/241-bcma-broadcom-2011-sdk-updates.patch

@@ -0,0 +1,50 @@
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -43,6 +43,7 @@ int bcma_core_enable(struct bcma_device
+ 	bcma_aread32(core, BCMA_IOCTL);
+ 
+ 	bcma_awrite32(core, BCMA_RESET_CTL, 0);
++	bcma_aread32(core, BCMA_RESET_CTL);
+ 	udelay(1);
+ 
+ 	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+--- a/include/linux/bcma/bcma_driver_pci.h
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -179,6 +179,8 @@ struct pci_dev;
+ #define BCMA_CORE_PCI_CFG_FUN_MASK		7	/* Function mask */
+ #define BCMA_CORE_PCI_CFG_OFF_MASK		0xfff	/* Register mask */
+ 
++#define BCMA_CORE_PCI_CFG_DEVCTRL		0xd8
++
+ /* PCIE Root Capability Register bits (Host mode only) */
+ #define BCMA_CORE_PCI_RC_CRS_VISIBILITY		0x0001
+ 
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -430,7 +430,7 @@ void __devinit bcma_core_pci_hostmode_in
+ 	/* Reset RC */
+ 	usleep_range(3000, 5000);
+ 	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
+-	usleep_range(1000, 2000);
++	msleep(50);
+ 	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
+ 			BCMA_CORE_PCI_CTL_RST_OE);
+ 
+@@ -492,6 +492,17 @@ void __devinit bcma_core_pci_hostmode_in
+ 
+ 	bcma_core_pci_enable_crs(pc);
+ 
++	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 ||
++	    bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) {
++		u16 val16;
++		bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++					&val16, sizeof(val16));
++		val16 |= (2 << 5);	/* Max payload size of 512 */
++		val16 |= (2 << 12);	/* MRRS 512 */
++		bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++					 &val16, sizeof(val16));
++	}
++
+ 	/* Enable PCI bridge BAR0 memory & master access */
+ 	tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ 	bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));