add config file support for the adm5120 switch

SVN-Revision: 10529
master
Travis Kemen 17 years ago
parent 3390dcc8d2
commit 66340c40ff
  1. 4
      package/admswconfig/Makefile
  2. 67
      package/admswconfig/files/admswconfig
  3. 25
      package/admswconfig/files/admswswitch.sh

@ -43,6 +43,10 @@ endef
define Package/admswconfig/install
$(INSTALL_DIR) $(1)/sbin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/admswconfig $(1)/sbin/
$(INSTALL_DIR) $(1)/lib/network/
$(INSTALL_DATA) ./files/admswswitch.sh $(1)/lib/network/admswswitch.sh
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/admswconfig $(1)/etc/init.d/admswconfig
endef
$(eval $(call BuildPackage,admswconfig))

@ -0,0 +1,67 @@
#!/bin/sh /etc/rc.common
# Copyright (C) 2006 OpenWrt.org
START=05
start() {
[ -e /etc/config/network ] && exit 0
mkdir -p /etc/config
adm5120_detect() {
board_name=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /system type/ {print $2}' /proc/cpuinfo)
case "$board_name" in
"Compex WP54"*)
board="WP54";;
*)
;;
esac
}
adm5120_detect
BEGIN {
FS="="
c["lan_ifname"]="eth0"
c["wan_ifname"]="eth1"
c["eth0ports"]="12345"
c["eth1ports"]="0"
}
END {
if (model == "Compex WP54") {
c["vlan0ports"]="0"
c["vlan1ports"]="1"
}
print "#### VLAN configuration "
print "config switch"
p("eth0", "eth0ports")
p("eth1", "eth1ports")
print ""
print ""
print "#### Loopback configuration"
print "config interface loopback"
print " option ifname \"lo\""
print " option proto static"
print " option ipaddr 127.0.0.1"
print " option netmask 255.0.0.0"
print ""
print ""
print "#### LAN configuration"
print "config interface lan"
print " option type bridge"
p("ifname", "lan_ifname")
p("macaddr", "lan_macaddr")
print " option proto static"
print " option ipaddr 192.168.1.1"
print " option netmask 255.255.255.0"
print ""
print ""
print "#### WAN configuration"
print "config interface wan"
p("ifname", "wan_ifname")
p("macaddr", "wan_macaddr")
print " option proto dhcp"
}' > /etc/config/network
}

@ -0,0 +1,25 @@
#!/bin/sh
# Copyright (C) 2006 OpenWrt.org
setup_switch_vlan() {
config_get ports "$CONFIG_SECTION" "eth$1"
admswconfig eth$1 ${ports}c
}
setup_switch() {
config_cb() {
case "$1" in
switch)
option_cb() {
case "$1" in
eth*) setup_switch_vlan "${1##eth}";;
esac
}
;;
*)
option_cb() { return 0; }
;;
esac
}
config_load network
}
Loading…
Cancel
Save