kirkwood: reorganize target

SVN-Revision: 32053

target/linux/kirkwood/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2009-2011 OpenWrt.org
+# Copyright (C) 2009-2012 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.

target/linux/kirkwood/config-3.3

@@ -11,7 +11,7 @@ CONFIG_ARM=y
 # CONFIG_ARM_CPU_SUSPEND is not set
 CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
 # CONFIG_ARM_THUMB is not set
 # CONFIG_ARPD is not set
 CONFIG_BCMA_POSSIBLE=y
@@ -150,6 +150,7 @@ CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PCI=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
+CONFIG_PHYS_OFFSET=0x0
 CONFIG_PLAT_ORION=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_RTC_CLASS=y

target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c

@@ -0,0 +1,190 @@
+/*
+ * arch/arm/mach-kirkwood/iconnect-setup.c
+ *
+ * Iomega iConnect Wireless
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition iconnect_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_1M + SZ_2M
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_32M,
+	}, {
+		.name = "data",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct gpio_led iconnect_led_pins[] = {
+	{
+		.name			= "iconnect:blue:power",
+		.default_trigger	= "default-on",
+		.gpio			= 42,
+	},
+	{
+		.name			= "iconnect:red:power",
+		.gpio			= 43,
+	},
+	{
+		.name			= "iconnect:blue:usb1",
+		.gpio			= 44,
+	},
+	{
+		.name			= "iconnect:blue:usb2",
+		.gpio			= 45,
+	},
+	{
+		.name			= "iconnect:blue:usb3",
+		.gpio			= 46,
+	},
+	{
+		.name			= "iconnect:blue:usb4",
+		.gpio			= 47,
+	},
+	{
+		.name			= "iconnect:blue:otb",
+		.gpio			= 48,
+	},
+};
+
+static struct gpio_led_platform_data iconnect_led_data = {
+	.leds		= iconnect_led_pins,
+	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
+};
+
+static struct platform_device iconnect_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &iconnect_led_data,
+	}
+};
+
+#define ICONNECT_GPIO_KEY_RESET		12
+#define ICONNECT_GPIO_KEY_OTB		35
+
+#define ICONNECT_SW_RESET		0x00
+#define ICONNECT_SW_OTB			0x01
+
+static struct gpio_keys_button iconnect_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= ICONNECT_SW_RESET,
+		.gpio		= ICONNECT_GPIO_KEY_RESET,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	},
+	{
+		.type		= EV_SW,
+		.code		= ICONNECT_SW_OTB,
+		.gpio		= ICONNECT_GPIO_KEY_OTB,
+		.desc		= "OTB Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	},
+};
+
+static struct gpio_keys_platform_data iconnect_button_data = {
+	.buttons	= iconnect_buttons,
+	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
+};
+
+static struct platform_device iconnect_button_device = {
+	.name	   	= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev = {
+		.platform_data = &iconnect_button_data,
+	},
+};
+
+static unsigned int iconnect_mpp_config[] __initdata = {
+	MPP12_GPIO, /*Input for reset button*/
+	MPP35_GPIO, /*Input for OTB button*/
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	0
+};
+
+static void __init iconnect_init(void)
+{
+	u32 dev, rev;
+
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(iconnect_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&iconnect_ge00_data);
+	kirkwood_pcie_id(&dev, &rev);
+
+	kirkwood_uart0_init();
+	kirkwood_i2c_init();
+
+	platform_device_register(&iconnect_leds);
+	platform_device_register(&iconnect_button_device);
+}
+
+static int __init iconnect_pci_init(void)
+{
+	if (machine_is_iconnect())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(iconnect_pci_init);
+
+
+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
+	.atag_offset	= 0x100,
+	.init_machine	= iconnect_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
+MACHINE_END

target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c

@@ -0,0 +1,189 @@
+/*
+ * arch/arm/mach-kirkwood/nas6210-setup.c
+ *
+ * Raidsonic ICYBOX NAS6210 Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NAS6210_GPIO_POWER_OFF	24
+
+static struct mtd_partition nas6210_nand_parts[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = SZ_512K
+	}, {
+		.name = "uboot_env",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_128K
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 3 * SZ_1M
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data nas6210_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data nas6210_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_led nas6210_led_pins[] = {
+	{
+		.name			= "status:green:power",
+		.default_trigger	= "default-on",
+		.gpio			= 25,
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:red:power",
+		.default_trigger	= "none",
+		.gpio			= 22,
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:red:usb_copy",
+		.default_trigger	= "none",
+		.gpio			= 27,
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data nas6210_led_data = {
+	.leds		= nas6210_led_pins,
+	.num_leds	= ARRAY_SIZE(nas6210_led_pins),
+};
+
+static struct platform_device nas6210_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &nas6210_led_data,
+	}
+};
+
+static struct gpio_keys_button nas6210_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 29,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 28,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data nas6210_button_data = {
+	.buttons	= nas6210_buttons,
+	.nbuttons	= ARRAY_SIZE(nas6210_buttons),
+};
+
+static struct platform_device nas6210_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &nas6210_button_data,
+	}
+};
+
+static unsigned int nas6210_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+ 	MPP22_GPIO,	/* Power LED red */
+	MPP24_GPIO,	/* Power off device */
+	MPP25_GPIO,	/* Power LED green */
+	MPP27_GPIO,	/* USB transfer LED */
+	MPP28_GPIO,	/* Reset button */
+	MPP29_GPIO,	/* USB Copy button */
+	0
+};
+
+static void nas6210_power_off(void)
+{
+	gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
+}
+
+static void __init nas6210_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(nas6210_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&nas6210_ge00_data);
+	kirkwood_sata_init(&nas6210_sata_data);
+	kirkwood_uart0_init();
+	platform_device_register(&nas6210_leds);
+	platform_device_register(&nas6210_button_device);
+	if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = nas6210_power_off;
+	else
+		pr_err("nas6210: failed to configure power-off GPIO\n");
+}
+
+static int __init nas6210_pci_init(void)
+{
+	if (machine_is_nas6210()) {
+		u32 dev, rev;
+
+		kirkwood_pcie_id(&dev, &rev);
+		if (dev == MV88F6282_DEV_ID)
+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+		else
+			kirkwood_pcie_init(KW_PCIE0);
+	}
+
+	return 0;
+}
+subsys_initcall(nas6210_pci_init);
+
+MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
+	/* Maintainer: <gmbnomis at gmail dot com> */
+	.atag_offset	= 0x100,
+	.init_machine	= nas6210_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END

target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c

@@ -0,0 +1,273 @@
+/*
+ * arch/arm/mach-kirkwood/nsa-310-setup.c
+ *
+ * ZyXEL NSA-310 Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NSA310_GPIO_LED_ESATA_GREEN	12
+#define NSA310_GPIO_LED_ESATA_RED	13
+#define NSA310_GPIO_LED_USB_GREEN	15
+#define NSA310_GPIO_LED_USB_RED		16
+#define NSA310_GPIO_USB_POWER_OFF	21
+#define NSA310_GPIO_LED_SYS_GREEN	28
+#define NSA310_GPIO_LED_SYS_RED		29
+#define NSA310_GPIO_KEY_RESTART		36
+#define NSA310_GPIO_KEY_COPY		37
+#define NSA310_GPIO_LED_COPY_GREEN	39
+#define NSA310_GPIO_LED_COPY_RED	40
+#define NSA310_GPIO_LED_HDD_GREEN	41
+#define NSA310_GPIO_LED_HDD_RED		42
+#define NSA310_GPIO_BUZZER		44
+#define NSA310_GPIO_KEY_POWER		46
+#define NSA310_GPIO_POWER_OFF		48
+
+
+static unsigned int nsa310_mpp_config[] __initdata = {
+	MPP12_GPIO,
+	MPP13_GPIO,
+	MPP15_GPIO,
+	MPP16_GPIO,
+	MPP21_GPIO,
+	MPP28_GPIO,
+	MPP29_GPIO,
+	MPP36_GPIO,
+	MPP37_GPIO,
+	MPP39_GPIO,
+	MPP40_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP44_GPIO,
+	MPP46_GPIO,
+	MPP48_GPIO,
+	0
+};
+
+static struct mtd_partition nsa310_mtd_parts[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0,
+		.size	= 0x100000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "uboot_env",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x80000,
+	}, {
+		.name	= "key_store",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x80000,
+	}, {
+		.name	= "info",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x80000,
+	}, {
+		.name	= "etc",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0xa00000,
+	}, {
+		.name	= "kernel_1",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0xa00000,
+	}, {
+		.name	= "rootfs1",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x2fc0000,
+	}, {
+		.name	= "kernel_2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0xa00000,
+	}, {
+		.name	= "rootfs2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x2fc0000,
+	},
+};
+
+static struct gpio_led nsa310_leds[] = {
+	{
+		.name	= "nsa310:green:sys",
+		.gpio	= NSA310_GPIO_LED_SYS_GREEN,
+	}, {
+		.name	= "nsa310:red:sys",
+		.gpio	= NSA310_GPIO_LED_SYS_RED,
+	}, {
+		.name	= "nsa310:green:hdd",
+		.gpio	= NSA310_GPIO_LED_HDD_GREEN,
+	}, {
+		.name	= "nsa310:red:hdd",
+		.gpio	= NSA310_GPIO_LED_HDD_RED,
+	}, {
+		.name	= "nsa310:green:esata",
+		.gpio	= NSA310_GPIO_LED_ESATA_GREEN,
+	}, {
+		.name	= "nsa310:red:esata",
+		.gpio	= NSA310_GPIO_LED_ESATA_RED,
+	}, {
+		.name	= "nsa310:green:usb",
+		.gpio	= NSA310_GPIO_LED_USB_GREEN,
+	}, {
+		.name	= "nsa310:red:usb",
+		.gpio	= NSA310_GPIO_LED_USB_RED,
+	}, {
+		.name	= "nsa310:green:copy",
+		.gpio	= NSA310_GPIO_LED_COPY_GREEN,
+	}, {
+		.name	= "nsa310:red:copy",
+		.gpio	= NSA310_GPIO_LED_COPY_RED,
+	},
+};
+
+static struct gpio_led_platform_data nsa310_leds_data = {
+	.leds		= nsa310_leds,
+	.num_leds	= ARRAY_SIZE(nsa310_leds),
+};
+
+static struct platform_device nsa310_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &nsa310_leds_data,
+	}
+};
+
+static struct gpio_keys_button nsa310_buttons[] = {
+	{
+		.desc		= "Power Button",
+		.code		= KEY_POWER,
+		.type		= EV_KEY,
+		.gpio		= NSA310_GPIO_KEY_POWER,
+		.debounce_interval = 1000,
+	}, {
+		.desc		= "Copy Button",
+		.code		= KEY_COPY,
+		.type		= EV_KEY,
+		.gpio		= NSA310_GPIO_KEY_COPY,
+		.active_low	= 1,
+		.debounce_interval = 1000,
+	}, {
+		.desc		= "Reset Button",
+		.code		= KEY_RESTART,
+		.type		= EV_KEY,
+		.gpio		= NSA310_GPIO_KEY_RESTART,
+		.active_low	= 1,
+		.debounce_interval = 1000,
+	},
+};
+
+static struct gpio_keys_platform_data nsa310_keys_data = {
+	.buttons	= nsa310_buttons,
+	.nbuttons	= ARRAY_SIZE(nsa310_buttons),
+};
+
+static struct platform_device nsa310_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev = {
+		.platform_data  = &nsa310_keys_data,
+	}
+};
+
+static struct i2c_board_info __initdata nsa310_i2c_info[] = {
+        { I2C_BOARD_INFO("adt7476", 0x2e) },
+};
+
+static struct mv_sata_platform_data nsa310_sata_data = {
+	.n_ports	= 2,
+};
+
+static void nsa310_power_off(void)
+{
+	gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
+}
+
+static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
+				       const char *label)
+{
+	int err;
+
+	err = gpio_request_one(gpio, flags, label);
+	if (err)
+		pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
+			gpio, label, err);
+
+	return err;
+}
+
+static void __init nsa310_gpio_init(void)
+{
+	int err;
+
+	err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
+				  "Power Off");
+	if (!err)
+		pm_power_off = nsa310_power_off;
+
+	nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
+			    "USB Power Off");
+}
+
+static void __init nsa310_init(void)
+{
+	u32 dev, rev;
+
+	kirkwood_init();
+	kirkwood_mpp_conf(nsa310_mpp_config);
+
+	nsa310_gpio_init();
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_mtd_parts), 35);
+	kirkwood_ehci_init();
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	kirkwood_sata_init(&nsa310_sata_data);
+	kirkwood_uart0_init();
+
+	i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
+	kirkwood_i2c_init();
+
+	platform_device_register(&nsa310_leds_device);
+	platform_device_register(&nsa310_keys_device);
+}
+
+static int __init nsa310_pci_init(void)
+{
+	if (machine_is_nsa310())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(nsa310_pci_init);
+
+MACHINE_START(NSA310, "ZyXEL NSA-310")
+	.atag_offset	= 0x100,
+	.init_machine	= nsa310_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
+MACHINE_END

target/linux/kirkwood/patches-3.3/200-iconnect.patch

@@ -1,218 +0,0 @@
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheeva
- obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
- obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
- obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
-+obj-$(CONFIG_MACH_ICONNECT)		+= iconnect-setup.o
- obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -130,6 +130,12 @@ config MACH_T5325
- 	  Say 'Y' here if you want your kernel to support the
- 	  HP t5325 Thin Client.
- 
-+config MACH_ICONNECT
-+	bool "Iomega iConnect Wireless"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Iomega iConnect Wireless.
-+
- endmenu
- 
- endif
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/iconnect-setup.c
-@@ -0,0 +1,190 @@
-+/*
-+ * arch/arm/mach-kirkwood/iconnect-setup.c
-+ *
-+ * Iomega iConnect Wireless
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/ethtool.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <mach/kirkwood.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+static struct mtd_partition iconnect_nand_parts[] = {
-+	{
-+		.name = "u-boot",
-+		.offset = 0,
-+		.size = SZ_1M
-+	}, {
-+		.name = "uImage",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_1M + SZ_2M
-+	}, {
-+		.name = "rootfs",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_32M,
-+	}, {
-+		.name = "data",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = MTDPART_SIZ_FULL
-+	},
-+};
-+
-+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-+};
-+
-+static struct gpio_led iconnect_led_pins[] = {
-+	{
-+		.name			= "iconnect:blue:power",
-+		.default_trigger	= "default-on",
-+		.gpio			= 42,
-+	},
-+	{
-+		.name			= "iconnect:red:power",
-+		.gpio			= 43,
-+	},
-+	{
-+		.name			= "iconnect:blue:usb1",
-+		.gpio			= 44,
-+	},
-+	{
-+		.name			= "iconnect:blue:usb2",
-+		.gpio			= 45,
-+	},
-+	{
-+		.name			= "iconnect:blue:usb3",
-+		.gpio			= 46,
-+	},
-+	{
-+		.name			= "iconnect:blue:usb4",
-+		.gpio			= 47,
-+	},
-+	{
-+		.name			= "iconnect:blue:otb",
-+		.gpio			= 48,
-+	},
-+};
-+
-+static struct gpio_led_platform_data iconnect_led_data = {
-+	.leds		= iconnect_led_pins,
-+	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
-+};
-+
-+static struct platform_device iconnect_leds = {
-+	.name	= "leds-gpio",
-+	.id	= -1,
-+	.dev	= {
-+		.platform_data	= &iconnect_led_data,
-+	}
-+};
-+
-+#define ICONNECT_GPIO_KEY_RESET		12
-+#define ICONNECT_GPIO_KEY_OTB		35
-+
-+#define ICONNECT_SW_RESET		0x00
-+#define ICONNECT_SW_OTB			0x01
-+
-+static struct gpio_keys_button iconnect_buttons[] = {
-+	{
-+		.type		= EV_SW,
-+		.code		= ICONNECT_SW_RESET,
-+		.gpio		= ICONNECT_GPIO_KEY_RESET,
-+		.desc		= "Reset Button",
-+		.active_low	= 1,
-+		.debounce_interval = 100,
-+	},
-+	{
-+		.type		= EV_SW,
-+		.code		= ICONNECT_SW_OTB,
-+		.gpio		= ICONNECT_GPIO_KEY_OTB,
-+		.desc		= "OTB Button",
-+		.active_low	= 1,
-+		.debounce_interval = 100,
-+	},
-+};
-+
-+static struct gpio_keys_platform_data iconnect_button_data = {
-+	.buttons	= iconnect_buttons,
-+	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
-+};
-+
-+static struct platform_device iconnect_button_device = {
-+	.name	   	= "gpio-keys",
-+	.id		= -1,
-+	.num_resources	= 0,
-+	.dev = {
-+		.platform_data = &iconnect_button_data,
-+	},
-+};
-+
-+static unsigned int iconnect_mpp_config[] __initdata = {
-+	MPP12_GPIO, /*Input for reset button*/
-+	MPP35_GPIO, /*Input for OTB button*/
-+	MPP42_GPIO,
-+	MPP43_GPIO,
-+	MPP44_GPIO,
-+	MPP45_GPIO,
-+	MPP46_GPIO,
-+	MPP47_GPIO,
-+	MPP48_GPIO,
-+	0
-+};
-+
-+static void __init iconnect_init(void)
-+{
-+	u32 dev, rev;
-+
-+	/*
-+	 * Basic setup. Needs to be called early.
-+	 */
-+	kirkwood_init();
-+	kirkwood_mpp_conf(iconnect_mpp_config);
-+
-+	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
-+	kirkwood_ehci_init();
-+
-+	kirkwood_ge00_init(&iconnect_ge00_data);
-+	kirkwood_pcie_id(&dev, &rev);
-+
-+	kirkwood_uart0_init();
-+	kirkwood_i2c_init();
-+
-+	platform_device_register(&iconnect_leds);
-+	platform_device_register(&iconnect_button_device);
-+}
-+
-+static int __init iconnect_pci_init(void)
-+{
-+	if (machine_is_iconnect())
-+		kirkwood_pcie_init(KW_PCIE0);
-+
-+	return 0;
-+}
-+subsys_initcall(iconnect_pci_init);
-+
-+
-+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
-+	.atag_offset	= 0x100,
-+	.init_machine	= iconnect_init,
-+	.map_io		= kirkwood_map_io,
-+	.init_early	= kirkwood_init_early,
-+	.init_irq	= kirkwood_init_irq,
-+	.timer		= &kirkwood_timer,
-+	.restart	= kirkwood_restart,
-+MACHINE_END

target/linux/kirkwood/patches-3.3/201-raidsonic-IB-NAS62x0-support.patch

@@ -1,216 +0,0 @@
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/nas6210-setup.c
-@@ -0,0 +1,189 @@
-+/*
-+ * arch/arm/mach-kirkwood/nas6210-setup.c
-+ *
-+ * Raidsonic ICYBOX NAS6210 Board Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/ata_platform.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <mach/kirkwood.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+#define NAS6210_GPIO_POWER_OFF	24
-+
-+static struct mtd_partition nas6210_nand_parts[] = {
-+	{
-+		.name = "uboot",
-+		.offset = 0,
-+		.size = SZ_512K
-+	}, {
-+		.name = "uboot_env",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_128K
-+	}, {
-+		.name = "kernel",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = 3 * SZ_1M
-+	}, {
-+		.name = "rootfs",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = MTDPART_SIZ_FULL
-+	},
-+};
-+
-+static struct mv643xx_eth_platform_data nas6210_ge00_data = {
-+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-+};
-+
-+static struct mv_sata_platform_data nas6210_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+static struct gpio_led nas6210_led_pins[] = {
-+	{
-+		.name			= "status:green:power",
-+		.default_trigger	= "default-on",
-+		.gpio			= 25,
-+		.active_low		= 0,
-+	},
-+	{
-+		.name			= "status:red:power",
-+		.default_trigger	= "none",
-+		.gpio			= 22,
-+		.active_low		= 0,
-+	},
-+	{
-+		.name			= "status:red:usb_copy",
-+		.default_trigger	= "none",
-+		.gpio			= 27,
-+		.active_low		= 0,
-+	},
-+};
-+
-+static struct gpio_led_platform_data nas6210_led_data = {
-+	.leds		= nas6210_led_pins,
-+	.num_leds	= ARRAY_SIZE(nas6210_led_pins),
-+};
-+
-+static struct platform_device nas6210_leds = {
-+	.name	= "leds-gpio",
-+	.id	= -1,
-+	.dev	= {
-+		.platform_data	= &nas6210_led_data,
-+	}
-+};
-+
-+static struct gpio_keys_button nas6210_buttons[] = {
-+	{
-+		.code		= KEY_COPY,
-+		.gpio		= 29,
-+		.desc		= "USB Copy",
-+		.active_low	= 1,
-+	},
-+	{
-+		.code		= KEY_RESTART,
-+		.gpio		= 28,
-+		.desc		= "Reset",
-+		.active_low	= 1,
-+	},
-+};
-+
-+static struct gpio_keys_platform_data nas6210_button_data = {
-+	.buttons	= nas6210_buttons,
-+	.nbuttons	= ARRAY_SIZE(nas6210_buttons),
-+};
-+
-+static struct platform_device nas6210_button_device = {
-+	.name		= "gpio-keys",
-+	.id		= -1,
-+	.num_resources	= 0,
-+	.dev		= {
-+		.platform_data	= &nas6210_button_data,
-+	}
-+};
-+
-+static unsigned int nas6210_mpp_config[] __initdata = {
-+	MPP0_NF_IO2,
-+	MPP1_NF_IO3,
-+	MPP2_NF_IO4,
-+	MPP3_NF_IO5,
-+	MPP4_NF_IO6,
-+	MPP5_NF_IO7,
-+	MPP18_NF_IO0,
-+	MPP19_NF_IO1,
-+ 	MPP22_GPIO,	/* Power LED red */
-+	MPP24_GPIO,	/* Power off device */
-+	MPP25_GPIO,	/* Power LED green */
-+	MPP27_GPIO,	/* USB transfer LED */
-+	MPP28_GPIO,	/* Reset button */
-+	MPP29_GPIO,	/* USB Copy button */
-+	0
-+};
-+
-+static void nas6210_power_off(void)
-+{
-+	gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
-+}
-+
-+static void __init nas6210_init(void)
-+{
-+	/*
-+	 * Basic setup. Needs to be called early.
-+	 */
-+	kirkwood_init();
-+	kirkwood_mpp_conf(nas6210_mpp_config);
-+
-+	kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
-+	kirkwood_ehci_init();
-+	kirkwood_ge00_init(&nas6210_ge00_data);
-+	kirkwood_sata_init(&nas6210_sata_data);
-+	kirkwood_uart0_init();
-+	platform_device_register(&nas6210_leds);
-+	platform_device_register(&nas6210_button_device);
-+	if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
-+	    gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
-+		pm_power_off = nas6210_power_off;
-+	else
-+		pr_err("nas6210: failed to configure power-off GPIO\n");
-+}
-+
-+static int __init nas6210_pci_init(void)
-+{
-+	if (machine_is_nas6210()) {
-+		u32 dev, rev;
-+
-+		kirkwood_pcie_id(&dev, &rev);
-+		if (dev == MV88F6282_DEV_ID)
-+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-+		else
-+			kirkwood_pcie_init(KW_PCIE0);
-+	}
-+
-+	return 0;
-+}
-+subsys_initcall(nas6210_pci_init);
-+
-+MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
-+	/* Maintainer: <gmbnomis at gmail dot com> */
-+	.atag_offset	= 0x100,
-+	.init_machine	= nas6210_init,
-+	.map_io		= kirkwood_map_io,
-+	.init_early	= kirkwood_init_early,
-+	.init_irq	= kirkwood_init_irq,
-+	.timer		= &kirkwood_timer,
-+MACHINE_END
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -136,6 +136,12 @@ config MACH_ICONNECT
- 	  Say 'Y' here if you want your kernel to support the
- 	  Iomega iConnect Wireless.
- 
-+config MACH_NAS6210
-+	bool "RaidSonic ICY BOX IB-NAS6210"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  RaidSonic ICY BOX IB-NAS6210 device.
-+
- endmenu
- 
- endif
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -19,5 +19,6 @@ obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2
- obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
-+obj-$(CONFIG_MACH_NAS6210)		+= nas6210-setup.o
- 
- obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o

target/linux/kirkwood/patches-3.3/202-zyxel-nsa-310.patch

@@ -1,300 +0,0 @@
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -142,6 +142,12 @@ config MACH_NAS6210
- 	  Say 'Y' here if you want your kernel to support the
- 	  RaidSonic ICY BOX IB-NAS6210 device.
- 
-+config MACH_NSA310
-+	bool "ZyXEL NSA-310"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  ZyXEL NSA-310 board.
-+
- endmenu
- 
- endif
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -20,5 +20,6 @@ obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbi
- obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
- obj-$(CONFIG_MACH_NAS6210)		+= nas6210-setup.o
-+obj-$(CONFIG_MACH_NSA310)		+= nsa-310-setup.o
- 
- obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/nsa-310-setup.c
-@@ -0,0 +1,273 @@
-+/*
-+ * arch/arm/mach-kirkwood/nsa-310-setup.c
-+ *
-+ * ZyXEL NSA-310 Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/ata_platform.h>
-+#include <linux/i2c.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/leds.h>
-+#include <linux/delay.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <mach/kirkwood.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+#define NSA310_GPIO_LED_ESATA_GREEN	12
-+#define NSA310_GPIO_LED_ESATA_RED	13
-+#define NSA310_GPIO_LED_USB_GREEN	15
-+#define NSA310_GPIO_LED_USB_RED		16
-+#define NSA310_GPIO_USB_POWER_OFF	21
-+#define NSA310_GPIO_LED_SYS_GREEN	28
-+#define NSA310_GPIO_LED_SYS_RED		29
-+#define NSA310_GPIO_KEY_RESTART		36
-+#define NSA310_GPIO_KEY_COPY		37
-+#define NSA310_GPIO_LED_COPY_GREEN	39
-+#define NSA310_GPIO_LED_COPY_RED	40
-+#define NSA310_GPIO_LED_HDD_GREEN	41
-+#define NSA310_GPIO_LED_HDD_RED		42
-+#define NSA310_GPIO_BUZZER		44
-+#define NSA310_GPIO_KEY_POWER		46
-+#define NSA310_GPIO_POWER_OFF		48
-+
-+
-+static unsigned int nsa310_mpp_config[] __initdata = {
-+	MPP12_GPIO,
-+	MPP13_GPIO,
-+	MPP15_GPIO,
-+	MPP16_GPIO,
-+	MPP21_GPIO,
-+	MPP28_GPIO,
-+	MPP29_GPIO,
-+	MPP36_GPIO,
-+	MPP37_GPIO,
-+	MPP39_GPIO,
-+	MPP40_GPIO,
-+	MPP41_GPIO,
-+	MPP42_GPIO,
-+	MPP44_GPIO,
-+	MPP46_GPIO,
-+	MPP48_GPIO,
-+	0
-+};
-+
-+static struct mtd_partition nsa310_mtd_parts[] = {
-+	{
-+		.name	= "uboot",
-+		.offset	= 0,
-+		.size	= 0x100000,
-+		.mask_flags = MTD_WRITEABLE,
-+	}, {
-+		.name	= "uboot_env",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 0x80000,
-+	}, {
-+		.name	= "key_store",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 0x80000,
-+	}, {
-+		.name	= "info",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 0x80000,
-+	}, {
-+		.name	= "etc",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 0xa00000,
-+	}, {
-+		.name	= "kernel_1",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 0xa00000,
-+	}, {
-+		.name	= "rootfs1",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 0x2fc0000,
-+	}, {
-+		.name	= "kernel_2",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 0xa00000,
-+	}, {
-+		.name	= "rootfs2",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 0x2fc0000,
-+	},
-+};
-+
-+static struct gpio_led nsa310_leds[] = {
-+	{
-+		.name	= "nsa310:green:sys",
-+		.gpio	= NSA310_GPIO_LED_SYS_GREEN,
-+	}, {
-+		.name	= "nsa310:red:sys",
-+		.gpio	= NSA310_GPIO_LED_SYS_RED,
-+	}, {
-+		.name	= "nsa310:green:hdd",
-+		.gpio	= NSA310_GPIO_LED_HDD_GREEN,
-+	}, {
-+		.name	= "nsa310:red:hdd",
-+		.gpio	= NSA310_GPIO_LED_HDD_RED,
-+	}, {
-+		.name	= "nsa310:green:esata",
-+		.gpio	= NSA310_GPIO_LED_ESATA_GREEN,
-+	}, {
-+		.name	= "nsa310:red:esata",
-+		.gpio	= NSA310_GPIO_LED_ESATA_RED,
-+	}, {
-+		.name	= "nsa310:green:usb",
-+		.gpio	= NSA310_GPIO_LED_USB_GREEN,
-+	}, {
-+		.name	= "nsa310:red:usb",
-+		.gpio	= NSA310_GPIO_LED_USB_RED,
-+	}, {
-+		.name	= "nsa310:green:copy",
-+		.gpio	= NSA310_GPIO_LED_COPY_GREEN,
-+	}, {
-+		.name	= "nsa310:red:copy",
-+		.gpio	= NSA310_GPIO_LED_COPY_RED,
-+	},
-+};
-+
-+static struct gpio_led_platform_data nsa310_leds_data = {
-+	.leds		= nsa310_leds,
-+	.num_leds	= ARRAY_SIZE(nsa310_leds),
-+};
-+
-+static struct platform_device nsa310_leds_device = {
-+	.name	= "leds-gpio",
-+	.id	= -1,
-+	.dev	= {
-+		.platform_data	= &nsa310_leds_data,
-+	}
-+};
-+
-+static struct gpio_keys_button nsa310_buttons[] = {
-+	{
-+		.desc		= "Power Button",
-+		.code		= KEY_POWER,
-+		.type		= EV_KEY,
-+		.gpio		= NSA310_GPIO_KEY_POWER,
-+		.debounce_interval = 1000,
-+	}, {
-+		.desc		= "Copy Button",
-+		.code		= KEY_COPY,
-+		.type		= EV_KEY,
-+		.gpio		= NSA310_GPIO_KEY_COPY,
-+		.active_low	= 1,
-+		.debounce_interval = 1000,
-+	}, {
-+		.desc		= "Reset Button",
-+		.code		= KEY_RESTART,
-+		.type		= EV_KEY,
-+		.gpio		= NSA310_GPIO_KEY_RESTART,
-+		.active_low	= 1,
-+		.debounce_interval = 1000,
-+	},
-+};
-+
-+static struct gpio_keys_platform_data nsa310_keys_data = {
-+	.buttons	= nsa310_buttons,
-+	.nbuttons	= ARRAY_SIZE(nsa310_buttons),
-+};
-+
-+static struct platform_device nsa310_keys_device = {
-+	.name	= "gpio-keys",
-+	.id	= -1,
-+	.dev = {
-+		.platform_data  = &nsa310_keys_data,
-+	}
-+};
-+
-+static struct i2c_board_info __initdata nsa310_i2c_info[] = {
-+        { I2C_BOARD_INFO("adt7476", 0x2e) },
-+};
-+
-+static struct mv_sata_platform_data nsa310_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+static void nsa310_power_off(void)
-+{
-+	gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
-+}
-+
-+static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
-+				       const char *label)
-+{
-+	int err;
-+
-+	err = gpio_request_one(gpio, flags, label);
-+	if (err)
-+		pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
-+			gpio, label, err);
-+
-+	return err;
-+}
-+
-+static void __init nsa310_gpio_init(void)
-+{
-+	int err;
-+
-+	err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
-+				  "Power Off");
-+	if (!err)
-+		pm_power_off = nsa310_power_off;
-+
-+	nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
-+			    "USB Power Off");
-+}
-+
-+static void __init nsa310_init(void)
-+{
-+	u32 dev, rev;
-+
-+	kirkwood_init();
-+	kirkwood_mpp_conf(nsa310_mpp_config);
-+
-+	nsa310_gpio_init();
-+
-+	kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_mtd_parts), 35);
-+	kirkwood_ehci_init();
-+
-+	kirkwood_pcie_id(&dev, &rev);
-+
-+	kirkwood_sata_init(&nsa310_sata_data);
-+	kirkwood_uart0_init();
-+
-+	i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
-+	kirkwood_i2c_init();
-+
-+	platform_device_register(&nsa310_leds_device);
-+	platform_device_register(&nsa310_keys_device);
-+}
-+
-+static int __init nsa310_pci_init(void)
-+{
-+	if (machine_is_nsa310())
-+		kirkwood_pcie_init(KW_PCIE0);
-+
-+	return 0;
-+}
-+subsys_initcall(nsa310_pci_init);
-+
-+MACHINE_START(NSA310, "ZyXEL NSA-310")
-+	.atag_offset	= 0x100,
-+	.init_machine	= nsa310_init,
-+	.map_io		= kirkwood_map_io,
-+	.init_early	= kirkwood_init_early,
-+	.init_irq	= kirkwood_init_irq,
-+	.timer		= &kirkwood_timer,
-+	.restart	= kirkwood_restart,
-+MACHINE_END

target/linux/kirkwood/patches/000-boards.patch

@@ -0,0 +1,38 @@
+--- a/arch/arm/mach-kirkwood/Makefile
++++ b/arch/arm/mach-kirkwood/Makefile
+@@ -18,5 +18,8 @@ obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2
+ obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
+ obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
+ obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
++obj-$(CONFIG_MACH_ICONNECT)		+= iconnect-setup.o
++obj-$(CONFIG_MACH_NAS6210)		+= nas6210-setup.o
++obj-$(CONFIG_MACH_NSA310)              += nsa-310-setup.o
+ 
+ obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -130,6 +130,24 @@ config MACH_T5325
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  HP t5325 Thin Client.
+ 
++config MACH_ICONNECT
++	bool "Iomega iConnect Wireless"
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Iomega iConnect Wireless.
++
++config MACH_NAS6210
++	bool "RaidSonic ICY BOX IB-NAS6210"
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  RaidSonic ICY BOX IB-NAS6210 device.
++
++config MACH_NSA310
++	bool "ZyXEL NSA-310"
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  ZyXEL NSA-310 board.
++
+ endmenu
+ 
+ endif

target/linux/kirkwood/profiles/100-Sheevaplug.mk

@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Sheevaplug
-  NAME:=Globalscale Sheevaplug
-  PACKAGES:=
-endef
-
-define Profile/Sheevaplug/Description
-        Globalscale Sheevaplug Profile
-endef
-
-$(eval $(call Profile,Sheevaplug))

target/linux/kirkwood/profiles/200-Dockstar.mk

@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Dockstar
-  NAME:=Seagate Dockstar
-  PACKAGES:=
-endef
-
-define Profile/Dockstar/Description
-        Seagate Dockstar Profile
-endef
-
-$(eval $(call Profile,Dockstar))

target/linux/kirkwood/profiles/300-Iconnect.mk

@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Iconnect
-  NAME:=Iomega iConnect Wireless
-  PACKAGES:=kmod-i2c-mv64xxx kmod-hwmon-core kmod-hwmon-lm63
-endef
-
-define Profile/Iconnect/Description
-        Iomega iConnect Wireless
-endef
-
-$(eval $(call Profile,Iconnect))