atheros: update macroses names

Use AR2315_ prefix for macroses specific to AR2315/AR2316/AR2317 chips,
use AR5312_ prefix for macroses specific to AR5312/AR2312/AR2313 chips,
and use AR231X_ prefix for common macroses.

This patch should not cause any functional changes, only make clear
which macros is common and which macros is specific.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41701
master
Felix Fietkau 10 years ago
parent 04f3012fba
commit 5e0bd41bbe
  1. 528
      target/linux/atheros/patches-3.10/100-board.patch
  2. 2
      target/linux/atheros/patches-3.10/101-early-printk-support.patch
  3. 22
      target/linux/atheros/patches-3.10/105-ar2315_pci.patch

@ -42,7 +42,7 @@
+++ b/arch/mips/ar231x/Platform
@@ -0,0 +1,6 @@
+#
+# Atheros AR5312/AR2312 WiSoC
+# Atheros AR531X/AR231X WiSoC
+#
+platform-$(CONFIG_ATHEROS_AR231X) += ar231x/
+cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
@ -131,7 +131,7 @@
+check_board_data(u8 *flash_limit, u8 *addr, bool broken)
+{
+ /* config magic found */
+ if (*((u32 *)addr) == AR531X_BD_MAGIC)
+ if (*((u32 *)addr) == AR231X_BD_MAGIC)
+ return 1;
+
+ if (!broken)
@ -362,7 +362,7 @@
+ */
+
+/*
+ * Prom setup file for ar531x
+ * Prom setup file for ar231x
+ */
+
+#include <linux/init.h>
@ -389,8 +389,8 @@
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
@@ -0,0 +1,83 @@
+#ifndef __AR531X_PLATFORM_H
+#define __AR531X_PLATFORM_H
+#ifndef __ASM_MACH_AR231X_PLATFORM_H
+#define __ASM_MACH_AR231X_PLATFORM_H
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
@ -400,7 +400,7 @@
+ */
+struct ar231x_boarddata {
+ u32 magic; /* board data is valid */
+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
+#define AR231X_BD_MAGIC 0x35333131 /* "5311", for all 531x/231x platforms */
+ u16 cksum; /* checksum (starting with BD_REV 2) */
+ u16 rev; /* revision of this struct */
+#define BD_REV 4
@ -471,12 +471,12 @@
+ char *macaddr;
+};
+
+#endif /* __AR531X_PLATFORM_H */
+#endif /* __ASM_MACH_AR231X_PLATFORM_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
@@ -0,0 +1,84 @@
+/*
+ * Atheros SoC specific CPU feature overrides
+ * Atheros AR231x/AR531x SoC specific CPU feature overrides
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
@ -489,11 +489,11 @@
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+#ifndef __ASM_MACH_AR231X_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_AR231X_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
+ * The Atheros AR531x/AR231x SoCs have MIPS 4Kc/4KEc core.
+ */
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
@ -558,7 +558,7 @@
+/* #define cpu_dcache_line_size() ? */
+/* #define cpu_icache_line_size() ? */
+
+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
+#endif /* __ASM_MACH_AR231X_CPU_FEATURE_OVERRIDES_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
@@ -0,0 +1,79 @@
@ -571,8 +571,8 @@
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ */
+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
+#ifndef __ASM_MACH_AR231X_DMA_COHERENCE_H
+#define __ASM_MACH_AR231X_DMA_COHERENCE_H
+
+#define PCI_DMA_OFFSET 0x20000000
+
@ -640,12 +640,12 @@
+#endif
+}
+
+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
+#endif /* __ASM_MACH_AR231X_DMA_COHERENCE_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
@@ -0,0 +1,30 @@
+#ifndef _ATHEROS_GPIO_H_
+#define _ATHEROS_GPIO_H_
+#ifndef __ASM_MACH_AR231X_GPIO_H
+#define __ASM_MACH_AR231X_GPIO_H
+
+#include <ar231x.h>
+
@ -662,27 +662,27 @@
+/* Returns IRQ to attach for gpio. Unchecked function */
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return AR531X_GPIO_IRQ(gpio);
+ return AR231X_GPIO_IRQ(gpio);
+}
+
+/* Returns gpio for IRQ attached. Unchecked function */
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq - AR531X_GPIO_IRQ(0);
+ return irq - AR231X_GPIO_IRQ(0);
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#endif
+#endif /* __ASM_MACH_AR231X_GPIO_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/reset.h
@@ -0,0 +1,6 @@
+#ifndef __AR531X_RESET_H
+#define __AR531X_RESET_H
+#ifndef __ASM_MACH_AR231X_RESET_H
+#define __ASM_MACH_AR231X_RESET_H
+
+void ar531x_disable_reset_button(void);
+void ar231x_disable_reset_button(void);
+
+#endif /* __AR531X_RESET_H */
+#endif /* __ASM_MACH_AR231X_RESET_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/war.h
@@ -0,0 +1,25 @@
@ -693,8 +693,8 @@
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
+#ifndef __ASM_MACH_AR231X_WAR_H
+#define __ASM_MACH_AR231X_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
@ -710,7 +710,7 @@
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
+#endif /* __ASM_MACH_AR231X_WAR_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
@@ -0,0 +1,617 @@
@ -727,8 +727,8 @@
+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef __AR2315_REG_H
+#define __AR2315_REG_H
+#ifndef __ASM_MACH_AR231X_AR2315_REGS_H
+#define __ASM_MACH_AR231X_AR2315_REGS_H
+
+/*
+ * IRQs
@ -743,16 +743,16 @@
+/*
+ * Miscellaneous interrupts, which share IP2.
+ */
+#define AR2315_MISC_IRQ_NONE (AR531X_MISC_IRQ_BASE+0)
+#define AR2315_MISC_IRQ_UART0 (AR531X_MISC_IRQ_BASE+1)
+#define AR2315_MISC_IRQ_I2C_RSVD (AR531X_MISC_IRQ_BASE+2)
+#define AR2315_MISC_IRQ_SPI (AR531X_MISC_IRQ_BASE+3)
+#define AR2315_MISC_IRQ_AHB (AR531X_MISC_IRQ_BASE+4)
+#define AR2315_MISC_IRQ_APB (AR531X_MISC_IRQ_BASE+5)
+#define AR2315_MISC_IRQ_TIMER (AR531X_MISC_IRQ_BASE+6)
+#define AR2315_MISC_IRQ_GPIO (AR531X_MISC_IRQ_BASE+7)
+#define AR2315_MISC_IRQ_WATCHDOG (AR531X_MISC_IRQ_BASE+8)
+#define AR2315_MISC_IRQ_IR_RSVD (AR531X_MISC_IRQ_BASE+9)
+#define AR2315_MISC_IRQ_NONE (AR231X_MISC_IRQ_BASE+0)
+#define AR2315_MISC_IRQ_UART0 (AR231X_MISC_IRQ_BASE+1)
+#define AR2315_MISC_IRQ_I2C_RSVD (AR231X_MISC_IRQ_BASE+2)
+#define AR2315_MISC_IRQ_SPI (AR231X_MISC_IRQ_BASE+3)
+#define AR2315_MISC_IRQ_AHB (AR231X_MISC_IRQ_BASE+4)
+#define AR2315_MISC_IRQ_APB (AR231X_MISC_IRQ_BASE+5)
+#define AR2315_MISC_IRQ_TIMER (AR231X_MISC_IRQ_BASE+6)
+#define AR2315_MISC_IRQ_GPIO (AR231X_MISC_IRQ_BASE+7)
+#define AR2315_MISC_IRQ_WATCHDOG (AR231X_MISC_IRQ_BASE+8)
+#define AR2315_MISC_IRQ_IR_RSVD (AR231X_MISC_IRQ_BASE+9)
+#define AR2315_MISC_IRQ_COUNT 10
+
+
@ -878,7 +878,7 @@
+#define AR2315_NMI_EN 1
+
+/*
+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0).
+ */
+#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
+
@ -1065,7 +1065,7 @@
+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
+
+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for
+ * AR5313_GPIO_INT_* macros */
+ * AR2315_GPIO_INT_* macros */
+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
@ -1330,7 +1330,7 @@
+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
+#define PCI_DEVICE_MEM_SPACE 0x800000
+
+#endif /* __AR2315_REG_H */
+#endif /* __ASM_MACH_AR231X_AR2315_REGS_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
@@ -0,0 +1,253 @@
@ -1344,8 +1344,8 @@
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef AR5312_H
+#define AR5312_H
+#ifndef __ASM_MACH_AR231X_AR5312_REGS_H
+#define __ASM_MACH_AR231X_AR5312_REGS_H
+
+#include <asm/addrspace.h>
+
@ -1363,118 +1363,118 @@
+/*
+ * Miscellaneous interrupts, which share IP6.
+ */
+#define AR531X_MISC_IRQ_NONE (AR531X_MISC_IRQ_BASE+0)
+#define AR531X_MISC_IRQ_TIMER (AR531X_MISC_IRQ_BASE+1)
+#define AR531X_MISC_IRQ_AHB_PROC (AR531X_MISC_IRQ_BASE+2)
+#define AR531X_MISC_IRQ_AHB_DMA (AR531X_MISC_IRQ_BASE+3)
+#define AR531X_MISC_IRQ_GPIO (AR531X_MISC_IRQ_BASE+4)
+#define AR531X_MISC_IRQ_UART0 (AR531X_MISC_IRQ_BASE+5)
+#define AR531X_MISC_IRQ_UART0_DMA (AR531X_MISC_IRQ_BASE+6)
+#define AR531X_MISC_IRQ_WATCHDOG (AR531X_MISC_IRQ_BASE+7)
+#define AR531X_MISC_IRQ_LOCAL (AR531X_MISC_IRQ_BASE+8)
+#define AR531X_MISC_IRQ_SPI (AR531X_MISC_IRQ_BASE+9)
+#define AR531X_MISC_IRQ_COUNT 10
+#define AR5312_MISC_IRQ_NONE (AR231X_MISC_IRQ_BASE+0)
+#define AR5312_MISC_IRQ_TIMER (AR231X_MISC_IRQ_BASE+1)
+#define AR5312_MISC_IRQ_AHB_PROC (AR231X_MISC_IRQ_BASE+2)
+#define AR5312_MISC_IRQ_AHB_DMA (AR231X_MISC_IRQ_BASE+3)
+#define AR5312_MISC_IRQ_GPIO (AR231X_MISC_IRQ_BASE+4)
+#define AR5312_MISC_IRQ_UART0 (AR231X_MISC_IRQ_BASE+5)
+#define AR5312_MISC_IRQ_UART0_DMA (AR231X_MISC_IRQ_BASE+6)
+#define AR5312_MISC_IRQ_WATCHDOG (AR231X_MISC_IRQ_BASE+7)
+#define AR5312_MISC_IRQ_LOCAL (AR231X_MISC_IRQ_BASE+8)
+#define AR5312_MISC_IRQ_SPI (AR231X_MISC_IRQ_BASE+9)
+#define AR5312_MISC_IRQ_COUNT 10
+
+
+/* Address Map */
+#define AR531X_WLAN0 0x18000000
+#define AR531X_WLAN1 0x18500000
+#define AR531X_ENET0 0x18100000
+#define AR531X_ENET1 0x18200000
+#define AR531X_SDRAMCTL 0x18300000
+#define AR531X_FLASHCTL 0x18400000
+#define AR531X_APBBASE 0x1c000000
+#define AR531X_UART0 0x1c000000 /* UART MMR */
+#define AR531X_FLASH 0x1e000000
+#define AR5312_WLAN0 0x18000000
+#define AR5312_WLAN1 0x18500000
+#define AR5312_ENET0 0x18100000
+#define AR5312_ENET1 0x18200000
+#define AR5312_SDRAMCTL 0x18300000
+#define AR5312_FLASHCTL 0x18400000
+#define AR5312_APBBASE 0x1c000000
+#define AR5312_UART0 0x1c000000 /* UART MMR */
+#define AR5312_FLASH 0x1e000000
+
+/*
+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
+ * AR5312_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available. The AR5312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR531X_NUM_ENET_MAC 2
+#define AR5312_NUM_ENET_MAC 2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+
+/* MII registers offset inside Ethernet MMR region */
+#define AR531X_ENET0_MII (AR531X_ENET0 + 0x14)
+#define AR531X_ENET1_MII (AR531X_ENET1 + 0x14)
+#define AR5312_ENET0_MII (AR5312_ENET0 + 0x14)
+#define AR5312_ENET1_MII (AR5312_ENET1 + 0x14)
+
+/*
+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
+ * AR5312_NUM_WMAC defines the number of Wireless MACs that\
+ * should be considered available.
+ */
+#define AR531X_NUM_WMAC 2
+#define AR5312_NUM_WMAC 2
+
+/* Reset/Timer Block Address Map */
+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
+
+/* AR531X_WD_CTRL register bit field definitions */
+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR531X_WD_CTRL_NMI 0x0001
+#define AR531X_WD_CTRL_RESET 0x0002
+
+/* AR531X_ISR register bit field definitions */
+#define AR531X_ISR_NONE 0x0000
+#define AR531X_ISR_TIMER 0x0001
+#define AR531X_ISR_AHBPROC 0x0002
+#define AR531X_ISR_AHBDMA 0x0004
+#define AR531X_ISR_GPIO 0x0008
+#define AR531X_ISR_UART0 0x0010
+#define AR531X_ISR_UART0DMA 0x0020
+#define AR531X_ISR_WD 0x0040
+#define AR531X_ISR_LOCAL 0x0080
+
+/* AR531X_RESET register bit field definitions */
+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
+
+#define AR531X_RESET_WMAC0_BITS \
+ (AR531X_RESET_WLAN0 |\
+ AR531X_RESET_WARM_WLAN0_MAC |\
+ AR531X_RESET_WARM_WLAN0_BB)
+
+#define AR531X_RESERT_WMAC1_BITS \
+ (AR531X_RESET_WLAN1 |\
+ AR531X_RESET_WARM_WLAN1_MAC |\
+ AR531X_RESET_WARM_WLAN1_BB)
+#define AR5312_RESETTMR (AR5312_APBBASE + 0x3000)
+#define AR5312_TIMER (AR5312_RESETTMR + 0x0000) /* countdown timer */
+#define AR5312_WD_CTRL (AR5312_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR5312_WD_TIMER (AR5312_RESETTMR + 0x000c) /* watchdog timer */
+#define AR5312_ISR (AR5312_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR5312_IMR (AR5312_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR5312_RESET (AR5312_RESETTMR + 0x0020)
+#define AR5312_CLOCKCTL1 (AR5312_RESETTMR + 0x0064)
+#define AR5312_SCRATCH (AR5312_RESETTMR + 0x006c)
+#define AR5312_PROCADDR (AR5312_RESETTMR + 0x0070)
+#define AR5312_PROC1 (AR5312_RESETTMR + 0x0074)
+#define AR5312_DMAADDR (AR5312_RESETTMR + 0x0078)
+#define AR5312_DMA1 (AR5312_RESETTMR + 0x007c)
+#define AR5312_ENABLE (AR5312_RESETTMR + 0x0080) /* interface enb */
+#define AR5312_REV (AR5312_RESETTMR + 0x0090) /* revision */
+
+/* AR5312_WD_CTRL register bit field definitions */
+#define AR5312_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR5312_WD_CTRL_NMI 0x0001
+#define AR5312_WD_CTRL_RESET 0x0002
+
+/* AR5312_ISR register bit field definitions */
+#define AR5312_ISR_NONE 0x0000
+#define AR5312_ISR_TIMER 0x0001
+#define AR5312_ISR_AHBPROC 0x0002
+#define AR5312_ISR_AHBDMA 0x0004
+#define AR5312_ISR_GPIO 0x0008
+#define AR5312_ISR_UART0 0x0010
+#define AR5312_ISR_UART0DMA 0x0020
+#define AR5312_ISR_WD 0x0040
+#define AR5312_ISR_LOCAL 0x0080
+
+/* AR5312_RESET register bit field definitions */
+#define AR5312_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR5312_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR5312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define AR5312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR5312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR5312_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define AR5312_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+#define AR5312_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
+#define AR5312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR5312_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
+#define AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
+#define AR5312_RESET_NMI 0x00010000 /* send an NMI to the processor */
+#define AR5312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
+#define AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
+#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR5312_RESET_WDOG 0x00100000 /* last reset was a watchdog */
+
+#define AR5312_RESET_WMAC0_BITS \
+ (AR5312_RESET_WLAN0 |\
+ AR5312_RESET_WARM_WLAN0_MAC |\
+ AR5312_RESET_WARM_WLAN0_BB)
+
+#define AR5312_RESET_WMAC1_BITS \
+ (AR5312_RESET_WLAN1 |\
+ AR5312_RESET_WARM_WLAN1_MAC |\
+ AR5312_RESET_WARM_WLAN1_BB)
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
@ -1498,36 +1498,36 @@
+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+
+/* AR531X_ENABLE register bit field definitions */
+#define AR531X_ENABLE_WLAN0 0x0001
+#define AR531X_ENABLE_ENET0 0x0002
+#define AR531X_ENABLE_ENET1 0x0004
+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
+#define AR531X_ENABLE_WLAN1 \
+ (AR531X_ENABLE_UART_AND_WLAN1_PIO |\
+ AR531X_ENABLE_WLAN1_DMA)
+
+/* AR531X_REV register bit field definitions */
+#define AR531X_REV_WMAC_MAJ 0xf000
+#define AR531X_REV_WMAC_MAJ_S 12
+#define AR531X_REV_WMAC_MIN 0x0f00
+#define AR531X_REV_WMAC_MIN_S 8
+#define AR531X_REV_MAJ 0x00f0
+#define AR531X_REV_MAJ_S 4
+#define AR531X_REV_MIN 0x000f
+#define AR531X_REV_MIN_S 0
+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
+/* AR5312_ENABLE register bit field definitions */
+#define AR5312_ENABLE_WLAN0 0x0001
+#define AR5312_ENABLE_ENET0 0x0002
+#define AR5312_ENABLE_ENET1 0x0004
+#define AR5312_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
+#define AR5312_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
+#define AR5312_ENABLE_WLAN1 \
+ (AR5312_ENABLE_UART_AND_WLAN1_PIO |\
+ AR5312_ENABLE_WLAN1_DMA)
+
+/* AR5312_REV register bit field definitions */
+#define AR5312_REV_WMAC_MAJ 0xf000
+#define AR5312_REV_WMAC_MAJ_S 12
+#define AR5312_REV_WMAC_MIN 0x0f00
+#define AR5312_REV_WMAC_MIN_S 8
+#define AR5312_REV_MAJ 0x00f0
+#define AR5312_REV_MAJ_S 4
+#define AR5312_REV_MIN 0x000f
+#define AR5312_REV_MIN_S 0
+#define AR5312_REV_CHIP (AR5312_REV_MAJ|AR5312_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR531X_REV_MAJ_AR5312 0x4
+#define AR531X_REV_MAJ_AR2313 0x5
+#define AR5312_REV_MAJ_AR5312 0x4
+#define AR5312_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
+/* AR531X_FLASHCTL register bit field definitions */
+/* AR5312_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S 0
+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
@ -1559,33 +1559,33 @@
+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
+#define AR5312_FLASHCTL0 (AR5312_FLASHCTL + 0x00)
+#define AR5312_FLASHCTL1 (AR5312_FLASHCTL + 0x04)
+#define AR5312_FLASHCTL2 (AR5312_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
+#define AR5312_MEM_CFG1 (AR5312_SDRAMCTL + 0x04)
+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_AC0_S 8
+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_AC1_S 12
+
+/* GPIO Address Map */
+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
+#define AR5312_GPIO (AR5312_APBBASE + 0x2000)
+#define AR5312_GPIO_DO (AR5312_GPIO + 0x00) /* output register */
+#define AR5312_GPIO_DI (AR5312_GPIO + 0x04) /* intput register */
+#define AR5312_GPIO_CR (AR5312_GPIO + 0x08) /* control register */
+
+/* GPIO Control Register bit field definitions */
+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt*/
+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
+#define AR531X_NUM_GPIO 8
+#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */
+#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */
+#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt*/
+#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
+#define AR5312_NUM_GPIO 8
+
+
+#endif
+#endif /* __ASM_MACH_AR231X_AR5312_REGS_H */
+
--- /dev/null
+++ b/arch/mips/ar231x/ar5312.c
@ -1631,20 +1631,20 @@
+
+static void ar5312_misc_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) &
+ ar231x_read_reg(AR531X_IMR);
+
+ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
+ do_IRQ(AR531X_MISC_IRQ_TIMER);
+ (void)ar231x_read_reg(AR531X_TIMER);
+ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
+ do_IRQ(AR531X_MISC_IRQ_UART0);
+ else if (ar231x_misc_intrs & AR531X_ISR_WD)
+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR5312_ISR) &
+ ar231x_read_reg(AR5312_IMR);
+
+ if (ar231x_misc_intrs & AR5312_ISR_TIMER) {
+ do_IRQ(AR5312_MISC_IRQ_TIMER);
+ (void)ar231x_read_reg(AR5312_TIMER);
+ } else if (ar231x_misc_intrs & AR5312_ISR_AHBPROC)
+ do_IRQ(AR5312_MISC_IRQ_AHB_PROC);
+ else if ((ar231x_misc_intrs & AR5312_ISR_UART0))
+ do_IRQ(AR5312_MISC_IRQ_UART0);
+ else if (ar231x_misc_intrs & AR5312_ISR_WD)
+ do_IRQ(AR5312_MISC_IRQ_WATCHDOG);
+ else
+ do_IRQ(AR531X_MISC_IRQ_NONE);
+ do_IRQ(AR5312_MISC_IRQ_NONE);
+}
+
+static asmlinkage void
@ -1663,31 +1663,31 @@
+ else if (pending & CAUSEF_IP6)
+ do_IRQ(AR5312_IRQ_MISC_INTRS);
+ else if (pending & CAUSEF_IP7)
+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
+ do_IRQ(AR231X_IRQ_CPU_CLOCK);
+}
+
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+/* Enable the specified AR5312_MISC_IRQ interrupt */
+static void
+ar5312_misc_irq_unmask(struct irq_data *d)
+{
+ unsigned int imr;
+
+ imr = ar231x_read_reg(AR531X_IMR);
+ imr |= (1 << (d->irq - AR531X_MISC_IRQ_BASE - 1));
+ ar231x_write_reg(AR531X_IMR, imr);
+ imr = ar231x_read_reg(AR5312_IMR);
+ imr |= (1 << (d->irq - AR231X_MISC_IRQ_BASE - 1));
+ ar231x_write_reg(AR5312_IMR, imr);
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+/* Disable the specified AR5312_MISC_IRQ interrupt */
+static void
+ar5312_misc_irq_mask(struct irq_data *d)
+{
+ unsigned int imr;
+
+ imr = ar231x_read_reg(AR531X_IMR);
+ imr &= ~(1 << (d->irq - AR531X_MISC_IRQ_BASE - 1));
+ ar231x_write_reg(AR531X_IMR, imr);
+ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
+ imr = ar231x_read_reg(AR5312_IMR);
+ imr &= ~(1 << (d->irq - AR231X_MISC_IRQ_BASE - 1));
+ ar231x_write_reg(AR5312_IMR, imr);
+ ar231x_read_reg(AR5312_IMR); /* flush write buffer */
+}
+
+static struct irq_chip ar5312_misc_irq_chip = {
@ -1699,10 +1699,10 @@
+
+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
+{
+ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
+ u32 proc_addr = ar231x_read_reg(AR531X_PROCADDR); /* clears error */
+ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
+ u32 dma_addr = ar231x_read_reg(AR531X_DMAADDR); /* clears error */
+ u32 proc1 = ar231x_read_reg(AR5312_PROC1);
+ u32 proc_addr = ar231x_read_reg(AR5312_PROCADDR); /* clears error */
+ u32 dma1 = ar231x_read_reg(AR5312_DMA1);
+ u32 dma_addr = ar231x_read_reg(AR5312_DMAADDR); /* clears error */
+
+ pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x "
+ "DMAADDR=0x%8.8x DMA1=0x%8.8x\n", proc_addr, proc1, dma_addr,
@ -1727,12 +1727,12 @@
+ return;
+
+ ar231x_irq_dispatch = ar5312_irq_dispatch;
+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
+ int irq = AR531X_MISC_IRQ_BASE + i;
+ for (i = 0; i < AR5312_MISC_IRQ_COUNT; i++) {
+ int irq = AR231X_MISC_IRQ_BASE + i;
+ irq_set_chip_and_handler(irq, &ar5312_misc_irq_chip,
+ handle_level_irq);
+ }
+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
+ setup_irq(AR5312_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
+ irq_set_chained_handler(AR5312_IRQ_MISC_INTRS, ar5312_misc_irq_handler);
+}
+
@ -1742,28 +1742,28 @@
+static int
+ar5312_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ return (ar231x_read_reg(AR531X_GPIO_DI) >> gpio) & 1;
+ return (ar231x_read_reg(AR5312_GPIO_DI) >> gpio) & 1;
+}
+
+static void
+ar5312_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ u32 reg = ar231x_read_reg(AR531X_GPIO_DO);
+ u32 reg = ar231x_read_reg(AR5312_GPIO_DO);
+ reg = value ? reg | (1 << gpio) : reg & ~(1 << gpio);
+ ar231x_write_reg(AR531X_GPIO_DO, reg);
+ ar231x_write_reg(AR5312_GPIO_DO, reg);
+}
+
+static int
+ar5312_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ ar231x_mask_reg(AR531X_GPIO_CR, 0, 1 << gpio);
+ ar231x_mask_reg(AR5312_GPIO_CR, 0, 1 << gpio);
+ return 0;
+}
+
+static int
+ar5312_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ ar231x_mask_reg(AR531X_GPIO_CR, 1 << gpio, 0);
+ ar231x_mask_reg(AR5312_GPIO_CR, 1 << gpio, 0);
+ ar5312_gpio_set_value(chip, gpio, value);
+ return 0;
+}
@ -1775,7 +1775,7 @@
+ .set = ar5312_gpio_set_value,
+ .get = ar5312_gpio_get_value,
+ .base = 0,
+ .ngpio = AR531X_NUM_GPIO, /* 8 */
+ .ngpio = AR5312_NUM_GPIO, /* 8 */
+};
+
+/* end of gpiolib */
@ -1784,16 +1784,16 @@
+{
+ u32 val;
+
+ val = ar231x_read_reg(AR531X_RESET);
+ ar231x_write_reg(AR531X_RESET, val | mask);
+ val = ar231x_read_reg(AR5312_RESET);
+ ar231x_write_reg(AR5312_RESET, val | mask);
+}
+
+static void ar5312_device_reset_clear(u32 mask)
+{
+ u32 val;
+
+ val = ar231x_read_reg(AR531X_RESET);
+ ar231x_write_reg(AR531X_RESET, val & ~mask);
+ val = ar231x_read_reg(AR5312_RESET);
+ ar231x_write_reg(AR5312_RESET, val & ~mask);
+}
+
+static struct physmap_flash_data ar5312_flash_data = {
@ -1801,24 +1801,24 @@
+};
+
+static struct resource ar5312_flash_resource = {
+ .start = AR531X_FLASH,
+ .end = AR531X_FLASH + 0x800000 - 1,
+ .start = AR5312_FLASH,
+ .end = AR5312_FLASH + 0x800000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct ar231x_eth ar5312_eth0_data = {
+ .reset_set = ar5312_device_reset_set,
+ .reset_clear = ar5312_device_reset_clear,
+ .reset_mac = AR531X_RESET_ENET0,
+ .reset_phy = AR531X_RESET_EPHY0,
+ .reset_mac = AR5312_RESET_ENET0,
+ .reset_phy = AR5312_RESET_EPHY0,
+ .config = &ar231x_board,
+};
+
+static struct ar231x_eth ar5312_eth1_data = {
+ .reset_set = ar5312_device_reset_set,
+ .reset_clear = ar5312_device_reset_clear,
+ .reset_mac = AR531X_RESET_ENET1,
+ .reset_phy = AR531X_RESET_EPHY1,
+ .reset_mac = AR5312_RESET_ENET1,
+ .reset_phy = AR5312_RESET_EPHY1,
+ .config = &ar231x_board,
+};
+
@ -1865,20 +1865,20 @@
+ (0x01 << FLASHCTL_IDCY_S) |
+ (0x07 << FLASHCTL_WST1_S) |
+ (0x07 << FLASHCTL_WST2_S) |
+ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
+ (ar231x_read_reg(AR5312_FLASHCTL0) & FLASHCTL_MW);
+
+ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
+ ar231x_write_reg(AR5312_FLASHCTL0, ctl);
+
+ /* Disable other flash banks */
+ ar231x_write_reg(AR531X_FLASHCTL1,
+ ar231x_read_reg(AR531X_FLASHCTL1) &
+ ar231x_write_reg(AR5312_FLASHCTL1,
+ ar231x_read_reg(AR5312_FLASHCTL1) &
+ ~(FLASHCTL_E | FLASHCTL_AC));
+
+ ar231x_write_reg(AR531X_FLASHCTL2,
+ ar231x_read_reg(AR531X_FLASHCTL2) &
+ ar231x_write_reg(AR5312_FLASHCTL2,
+ ar231x_read_reg(AR5312_FLASHCTL2) &
+ ~(FLASHCTL_E | FLASHCTL_AC));
+
+ return (char *)KSEG1ADDR(AR531X_FLASH + 0x800000);
+ return (char *)KSEG1ADDR(AR5312_FLASH + 0x800000);
+}
+
+int __init ar5312_init_devices(void)
@ -1907,7 +1907,7 @@
+ ar231x_devtype = DEV_TYPE_AR5312;
+
+ /* fixup flash width */
+ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
+ fctl = ar231x_read_reg(AR5312_FLASHCTL) & FLASHCTL_MW;
+ switch (fctl) {
+ case FLASHCTL_MWx16:
+ ar5312_flash_data.width = 2;
@ -1940,13 +1940,13 @@
+ switch (ar231x_devtype) {
+ case DEV_TYPE_AR5312:
+ ar5312_eth0_data.macaddr = config->enet0_mac;
+ ar231x_add_ethernet(0, AR531X_ENET0, "eth0_mii",
+ AR531X_ENET0_MII, AR5312_IRQ_ENET0_INTRS,
+ ar231x_add_ethernet(0, AR5312_ENET0, "eth0_mii",
+ AR5312_ENET0_MII, AR5312_IRQ_ENET0_INTRS,
+ &ar5312_eth0_data);
+
+ ar5312_eth1_data.macaddr = config->enet1_mac;
+ ar231x_add_ethernet(1, AR531X_ENET1, "eth1_mii",
+ AR531X_ENET1_MII, AR5312_IRQ_ENET1_INTRS,
+ ar231x_add_ethernet(1, AR5312_ENET1, "eth1_mii",
+ AR5312_ENET1_MII, AR5312_IRQ_ENET1_INTRS,
+ &ar5312_eth1_data);
+
+ if (!ar231x_board.radio)
@ -1955,7 +1955,7 @@
+ if (!(config->flags & BD_WLAN0))
+ break;
+
+ ar231x_add_wmac(0, AR531X_WLAN0, AR5312_IRQ_WLAN0_INTRS);
+ ar231x_add_wmac(0, AR5312_WLAN0, AR5312_IRQ_WLAN0_INTRS);
+ break;
+ /*
+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
@ -1965,8 +1965,8 @@
+ case DEV_TYPE_AR2313:
+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
+ ar5312_eth1_data.macaddr = config->enet0_mac;
+ ar231x_add_ethernet(1, AR531X_ENET1, "eth0_mii",
+ AR531X_ENET0_MII, AR5312_IRQ_ENET1_INTRS,
+ ar231x_add_ethernet(1, AR5312_ENET1, "eth0_mii",
+ AR5312_ENET0_MII, AR5312_IRQ_ENET1_INTRS,
+ &ar5312_eth1_data);
+
+ if (!ar231x_board.radio)
@ -1977,7 +1977,7 @@
+ }
+
+ if (config->flags & BD_WLAN1)
+ ar231x_add_wmac(1, AR531X_WLAN1, AR5312_IRQ_WLAN1_INTRS);
+ ar231x_add_wmac(1, AR5312_WLAN1, AR5312_IRQ_WLAN1_INTRS);
+
+ return 0;
+}
@ -1988,7 +1988,7 @@
+ /* reset the system */
+ local_irq_disable();
+ while (1)
+ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
+ ar231x_write_reg(AR5312_RESET, AR5312_RESET_SYSTEM);
+}
+
+
@ -2014,10 +2014,10 @@
+ if (scratch)
+ return scratch;
+
+ devid = ar231x_read_reg(AR531X_REV);
+ devid &= AR531X_REV_MAJ;
+ devid >>= AR531X_REV_MAJ_S;
+ if (devid == AR531X_REV_MAJ_AR2313) {
+ devid = ar231x_read_reg(AR5312_REV);
+ devid &= AR5312_REV_MAJ;
+ devid >>= AR5312_REV_MAJ_S;
+ if (devid == AR5312_REV_MAJ_AR2313) {
+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
@ -2099,7 +2099,7 @@
+ return;
+
+ /* Detect memory size */
+ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
+ memcfg = ar231x_read_reg(AR5312_MEM_CFG1);
+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0) +
@ -2107,9 +2107,9 @@
+ memsize <<= 20;
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+
+ devid = ar231x_read_reg(AR531X_REV);
+ devid >>= AR531X_REV_WMAC_MIN_S;
+ devid &= AR531X_REV_CHIP;
+ devid = ar231x_read_reg(AR5312_REV);
+ devid >>= AR5312_REV_WMAC_MIN_S;
+ devid &= AR5312_REV_CHIP;
+ ar231x_board.devid = (u16) devid;
+ ar5312_gpio_init();
+}
@ -2121,12 +2121,12 @@
+ return;
+
+ /* Clear any lingering AHB errors */
+ ar231x_read_reg(AR531X_PROCADDR);
+ ar231x_read_reg(AR531X_DMAADDR);
+ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
+ ar231x_read_reg(AR5312_PROCADDR);
+ ar231x_read_reg(AR5312_DMAADDR);
+ ar231x_write_reg(AR5312_WD_CTRL, AR5312_WD_CTRL_IGNORE_EXPIRATION);
+
+ _machine_restart = ar5312_restart;
+ ar231x_serial_setup(AR531X_UART0, AR531X_MISC_IRQ_UART0,
+ ar231x_serial_setup(AR5312_UART0, AR5312_MISC_IRQ_UART0,
+ ar5312_sys_frequency());
+}
+
@ -2197,7 +2197,7 @@
+ return;
+
+ if (bit >= 0)
+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
+ do_IRQ(AR231X_GPIO_IRQ_BASE + bit);
+}
+
+static void ar2315_misc_irq_handler(unsigned irq, struct irq_desc *desc)
@ -2242,7 +2242,7 @@
+ else if (pending & CAUSEF_IP2)
+ do_IRQ(AR2315_IRQ_MISC_INTRS);
+ else if (pending & CAUSEF_IP7)
+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
+ do_IRQ(AR231X_IRQ_CPU_CLOCK);
+}
+
+static void ar2315_set_gpiointmask(int gpio, int level)
@ -2257,7 +2257,7 @@
+
+static void ar2315_gpio_irq_unmask(struct irq_data *d)
+{
+ unsigned int gpio = d->irq - AR531X_GPIO_IRQ_BASE;
+ unsigned int gpio = d->irq - AR231X_GPIO_IRQ_BASE;
+
+ /* Enable interrupt with edge detection */
+ if ((ar231x_read_reg(AR2315_GPIO_DIR) & AR2315_GPIO_DIR_M(gpio)) !=
@ -2270,7 +2270,7 @@
+
+static void ar2315_gpio_irq_mask(struct irq_data *d)
+{
+ unsigned int gpio = d->irq - AR531X_GPIO_IRQ_BASE;
+ unsigned int gpio = d->irq - AR231X_GPIO_IRQ_BASE;
+
+ /* Disable interrupt */
+ gpiointmask &= ~(1 << gpio);
@ -2289,7 +2289,7 @@
+ unsigned int imr;
+
+ imr = ar231x_read_reg(AR2315_IMR);
+ imr |= 1 << (d->irq - AR531X_MISC_IRQ_BASE - 1);
+ imr |= 1 << (d->irq - AR231X_MISC_IRQ_BASE - 1);
+ ar231x_write_reg(AR2315_IMR, imr);
+}
+
@ -2299,7 +2299,7 @@
+ unsigned int imr;
+
+ imr = ar231x_read_reg(AR2315_IMR);
+ imr &= ~(1 << (d->irq - AR531X_MISC_IRQ_BASE - 1));
+ imr &= ~(1 << (d->irq - AR231X_MISC_IRQ_BASE - 1));
+ ar231x_write_reg(AR2315_IMR, imr);
+}
+
@ -2336,12 +2336,12 @@
+ ar231x_irq_dispatch = ar2315_irq_dispatch;
+ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
+ for (i = 0; i < AR2315_MISC_IRQ_COUNT; i++) {
+ int irq = AR531X_MISC_IRQ_BASE + i;
+ int irq = AR231X_MISC_IRQ_BASE + i;
+ irq_set_chip_and_handler(irq, &ar2315_misc_irq_chip,
+ handle_level_irq);
+ }
+ for (i = 0; i < AR2315_NUM_GPIO; i++) {
+ int irq = AR531X_GPIO_IRQ_BASE + i;
+ int irq = AR231X_GPIO_IRQ_BASE + i;
+ irq_set_chip_and_handler(irq, &ar2315_gpio_irq_chip,
+ handle_level_irq);
+ }
@ -2773,22 +2773,22 @@
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
@@ -0,0 +1,43 @@
+#ifndef __AR531X_H
+#define __AR531X_H
+#ifndef __ASM_MACH_AR231X_H
+#define __ASM_MACH_AR231X_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+#define AR531X_MISC_IRQ_BASE 0x20
+#define AR531X_GPIO_IRQ_BASE 0x30
+#define AR231X_MISC_IRQ_BASE 0x20
+#define AR231X_GPIO_IRQ_BASE 0x30
+
+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
+#define AR531X_IRQ_NONE (MIPS_CPU_IRQ_BASE+0)
+#define AR531X_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE+7) /* C0_CAUSE: 0x8000 */
+#define AR231X_IRQ_NONE (MIPS_CPU_IRQ_BASE+0)
+#define AR231X_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE+7) /* C0_CAUSE: 0x8000 */
+
+/* GPIO Interrupts, share ARXXXX_MISC_IRQ_GPIO */
+#define AR531X_GPIO_IRQ_NONE (AR531X_GPIO_IRQ_BASE+0)
+#define AR531X_GPIO_IRQ(n) (AR531X_GPIO_IRQ_BASE+n)
+#define AR231X_GPIO_IRQ_NONE (AR231X_GPIO_IRQ_BASE+0)
+#define AR231X_GPIO_IRQ(n) (AR231X_GPIO_IRQ_BASE+n)
+
+static inline u32
+ar231x_read_reg(u32 reg)
@ -2815,7 +2815,7 @@
+ return ret;
+}
+
+#endif
+#endif /* __ASM_MACH_AR231X_H */
--- /dev/null
+++ b/arch/mips/ar231x/devices.h
@@ -0,0 +1,38 @@

@ -37,7 +37,7 @@
+ if (is_2315())
+ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0));
+ else
+ base = (void __iomem *)(KSEG1ADDR(AR531X_UART0));
+ base = (void __iomem *)(KSEG1ADDR(AR5312_UART0));
+ }
+
+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)

@ -39,9 +39,9 @@
+#include <ar2315_regs.h>
+#include "devices.h"
+
+#define AR531X_MEM_BASE 0x80800000UL
+#define AR531X_MEM_SIZE 0x00ffffffUL
+#define AR531X_IO_SIZE 0x00007fffUL
+#define AR2315_MEM_BASE 0x80800000UL
+#define AR2315_MEM_SIZE 0x00ffffffUL
+#define AR2315_IO_SIZE 0x00007fffUL
+
+static unsigned long configspace;
+
@ -114,17 +114,17 @@
+};
+
+static struct resource ar231x_mem_resource = {
+ .name = "AR531x PCI MEM",
+ .start = AR531X_MEM_BASE,
+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 +
+ .name = "AR2315 PCI MEM",
+ .start = AR2315_MEM_BASE,
+ .end = AR2315_MEM_BASE + AR2315_MEM_SIZE - AR2315_IO_SIZE - 1 +
+ 0x4000000,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource ar231x_io_resource = {
+ .name = "AR531x PCI I/O",
+ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
+ .name = "AR2315 PCI I/O",
+ .start = AR2315_MEM_BASE + AR2315_MEM_SIZE - AR2315_IO_SIZE,
+ .end = AR2315_MEM_BASE + AR2315_MEM_SIZE - 1,
+ .flags = IORESOURCE_IO,
+};
+
@ -193,8 +193,8 @@
+ configspace = (unsigned long) ioremap_nocache(AR2315_PCIEXT,
+ 1*1024*1024);
+ ar231x_pci_controller.io_map_base =
+ (unsigned long) ioremap_nocache(AR531X_MEM_BASE +
+ AR531X_MEM_SIZE, AR531X_IO_SIZE);
+ (unsigned long) ioremap_nocache(AR2315_MEM_BASE +
+ AR2315_MEM_SIZE, AR2315_IO_SIZE);
+ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space*/
+
+ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);

Loading…
Cancel
Save