From 5d52f4b51d223f245e27e6386e099ac8b5385b62 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 3 Apr 2015 19:06:30 +0000 Subject: [PATCH] ipq806x: add platform usb support This change adds DWC3 QCOM USB phys and TCSR drivers. These are cherry-picked from the following LKML threads: *dwc3 qcom: https://lkml.org/lkml/2014/9/12/599 *tcsr: https://lkml.org/lkml/2015/2/9/579 We're also adding an additional patch to add the corresponding dev nodes in the IPQ806x and AP148 dts files. Signed-off-by: Mathieu Olivari SVN-Revision: 45261 --- ...-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch | 511 ++++++++++++++++++ ...-qcom-add-USB-nodes-to-ipq806x-ap148.patch | 125 +++++ ...gsbi-Add-support-for-ADM-CRCI-muxing.patch | 258 +++++++++ .../103-ARM-DT-ipq8064-Add-TCSR-support.patch | 65 +++ .../700-add-gmac-dts-suport.patch | 21 +- 5 files changed, 969 insertions(+), 11 deletions(-) create mode 100644 target/linux/ipq806x/patches-3.18/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch create mode 100644 target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch create mode 100644 target/linux/ipq806x/patches-3.18/102-soc-qcom-gsbi-Add-support-for-ADM-CRCI-muxing.patch create mode 100644 target/linux/ipq806x/patches-3.18/103-ARM-DT-ipq8064-Add-TCSR-support.patch diff --git a/target/linux/ipq806x/patches-3.18/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch b/target/linux/ipq806x/patches-3.18/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch new file mode 100644 index 0000000000..25803b88eb --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch @@ -0,0 +1,511 @@ +--- a/drivers/phy/Kconfig ++++ b/drivers/phy/Kconfig +@@ -256,4 +256,15 @@ config PHY_STIH41X_USB + Enable this to support the USB transceiver that is part of + STMicroelectronics STiH41x SoC series. + ++config PHY_QCOM_DWC3 ++ tristate "QCOM DWC3 USB PHY support" ++ depends on ARCH_QCOM ++ depends on HAS_IOMEM ++ depends on OF ++ select GENERIC_PHY ++ help ++ This option enables support for the Synopsis PHYs present inside the ++ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS ++ PHY controllers. ++ + endmenu +--- a/drivers/phy/Makefile ++++ b/drivers/phy/Makefile +@@ -31,3 +31,4 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += + obj-$(CONFIG_PHY_XGENE) += phy-xgene.o + obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o + obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o ++obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o +--- /dev/null ++++ b/drivers/phy/phy-qcom-dwc3.c +@@ -0,0 +1,483 @@ ++/* Copyright (c) 2013-2014, Code Aurora Forum. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/** ++ * USB QSCRATCH Hardware registers ++ */ ++#define QSCRATCH_GENERAL_CFG (0x08) ++#define HSUSB_PHY_CTRL_REG (0x10) ++ ++/* PHY_CTRL_REG */ ++#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24) ++#define HSUSB_CTRL_USB2_SUSPEND BIT(23) ++#define HSUSB_CTRL_UTMI_CLK_EN BIT(21) ++#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20) ++#define HSUSB_CTRL_USE_CLKCORE BIT(18) ++#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17) ++#define HSUSB_CTRL_COMMONONN BIT(11) ++#define HSUSB_CTRL_ID_HV_CLAMP BIT(9) ++#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8) ++#define HSUSB_CTRL_CLAMP_EN BIT(7) ++#define HSUSB_CTRL_RETENABLEN BIT(1) ++#define HSUSB_CTRL_POR BIT(0) ++ ++/* QSCRATCH_GENERAL_CFG */ ++#define HSUSB_GCFG_XHCI_REV BIT(2) ++ ++/** ++ * USB QSCRATCH Hardware registers ++ */ ++#define SSUSB_PHY_CTRL_REG (0x00) ++#define SSUSB_PHY_PARAM_CTRL_1 (0x04) ++#define SSUSB_PHY_PARAM_CTRL_2 (0x08) ++#define CR_PROTOCOL_DATA_IN_REG (0x0c) ++#define CR_PROTOCOL_DATA_OUT_REG (0x10) ++#define CR_PROTOCOL_CAP_ADDR_REG (0x14) ++#define CR_PROTOCOL_CAP_DATA_REG (0x18) ++#define CR_PROTOCOL_READ_REG (0x1c) ++#define CR_PROTOCOL_WRITE_REG (0x20) ++ ++/* PHY_CTRL_REG */ ++#define SSUSB_CTRL_REF_USE_PAD BIT(28) ++#define SSUSB_CTRL_TEST_POWERDOWN BIT(27) ++#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24) ++#define SSUSB_CTRL_SS_PHY_EN BIT(8) ++#define SSUSB_CTRL_SS_PHY_RESET BIT(7) ++ ++/* SSPHY control registers */ ++#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane) ++#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane) ++ ++/* RX OVRD IN HI bits */ ++#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13) ++#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12) ++#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11) ++#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700 ++#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8 ++#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7) ++#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6) ++#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5) ++#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018 ++#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2) ++#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003 ++ ++/* TX OVRD DRV LO register bits */ ++#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F ++#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80 ++#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7 ++#define TX_OVRD_DRV_LO_EN BIT(14) ++ ++struct qcom_dwc3_usb_phy { ++ void __iomem *base; ++ struct device *dev; ++ struct phy *phy; ++ ++ int (*phy_init)(struct qcom_dwc3_usb_phy *phy_dwc3); ++ int (*phy_exit)(struct qcom_dwc3_usb_phy *phy_dwc3); ++ ++ struct clk *xo_clk; ++ struct clk *ref_clk; ++}; ++ ++/** ++ * Write register and read back masked value to confirm it is written ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @offset - register offset. ++ * @mask - register bitmask specifying what should be updated ++ * @val - value to write. ++ */ ++static inline void qcom_dwc3_phy_write_readback( ++ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset, ++ const u32 mask, u32 val) ++{ ++ u32 write_val, tmp = readl(phy_dwc3->base + offset); ++ ++ tmp &= ~mask; /* retain other bits */ ++ write_val = tmp | val; ++ ++ writel(write_val, phy_dwc3->base + offset); ++ ++ /* Read back to see if val was written */ ++ tmp = readl(phy_dwc3->base + offset); ++ tmp &= mask; /* clear other bits */ ++ ++ if (tmp != val) ++ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", ++ val, offset); ++} ++ ++static int wait_for_latch(void __iomem *addr) ++{ ++ u32 retry = 10; ++ ++ while (true) { ++ if (!readl(addr)) ++ break; ++ ++ if (--retry == 0) ++ return -ETIMEDOUT; ++ ++ usleep_range(10, 20); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Write SSPHY register ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @addr - SSPHY address to write. ++ * @val - value to write. ++ */ ++static int qcom_dwc3_ss_write_phycreg(void __iomem *base, u32 addr, u32 val) ++{ ++ int ret; ++ ++ writel(addr, base + CR_PROTOCOL_DATA_IN_REG); ++ writel(0x1, base + CR_PROTOCOL_CAP_ADDR_REG); ++ ++ ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG); ++ if (ret) ++ goto err_wait; ++ ++ writel(val, base + CR_PROTOCOL_DATA_IN_REG); ++ writel(0x1, base + CR_PROTOCOL_CAP_DATA_REG); ++ ++ ret = wait_for_latch(base + CR_PROTOCOL_CAP_DATA_REG); ++ if (ret) ++ goto err_wait; ++ ++ writel(0x1, base + CR_PROTOCOL_WRITE_REG); ++ ++ ret = wait_for_latch(base + CR_PROTOCOL_WRITE_REG); ++ ++err_wait: ++ return ret; ++} ++ ++/** ++ * Read SSPHY register. ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @addr - SSPHY address to read. ++ */ ++static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val) ++{ ++ int ret; ++ bool first_read = true; ++ ++ writel(addr, base + CR_PROTOCOL_DATA_IN_REG); ++ writel(0x1, base + CR_PROTOCOL_CAP_ADDR_REG); ++ ++ ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG); ++ if (ret) ++ goto err_wait; ++ ++ /* ++ * Due to hardware bug, first read of SSPHY register might be ++ * incorrect. Hence as workaround, SW should perform SSPHY register ++ * read twice, but use only second read and ignore first read. ++ */ ++retry: ++ writel(0x1, base + CR_PROTOCOL_READ_REG); ++ ++ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG); ++ if (ret) ++ goto err_wait; ++ ++ if (first_read) { ++ readl(base + CR_PROTOCOL_DATA_OUT_REG); ++ first_read = false; ++ goto retry; ++ } ++ ++ *val = readl(base + CR_PROTOCOL_DATA_OUT_REG); ++ ++err_wait: ++ return ret; ++} ++ ++static int qcom_dwc3_phy_power_on(struct phy *phy) ++{ ++ int ret; ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ ret = clk_prepare_enable(phy_dwc3->xo_clk); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(phy_dwc3->ref_clk); ++ if (ret) ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ ++ return ret; ++} ++ ++static int qcom_dwc3_phy_power_off(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ clk_disable_unprepare(phy_dwc3->ref_clk); ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ ++ return 0; ++} ++ ++static int qcom_dwc3_hs_phy_init(struct qcom_dwc3_usb_phy *phy_dwc3) ++{ ++ u32 val; ++ ++ /* ++ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel ++ * enable clamping, and disable RETENTION (power-on default is ENABLED) ++ */ ++ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP | ++ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN | ++ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP | ++ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID | ++ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70; ++ ++ /* use core clock if external reference is not present */ ++ if (!phy_dwc3->xo_clk) ++ val |= HSUSB_CTRL_USE_CLKCORE; ++ ++ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG); ++ usleep_range(2000, 2200); ++ ++ /* Disable (bypass) VBUS and ID filters */ ++ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG); ++ ++ return 0; ++} ++ ++static int qcom_dwc3_ss_phy_init(struct qcom_dwc3_usb_phy *phy_dwc3) ++{ ++ int ret; ++ u32 data = 0; ++ ++ /* reset phy */ ++ data = readl_relaxed(phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ writel_relaxed(data | SSUSB_CTRL_SS_PHY_RESET, ++ phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ usleep_range(2000, 2200); ++ writel_relaxed(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ ++ /* clear REF_PAD if we don't have XO clk */ ++ if (!phy_dwc3->xo_clk) ++ data &= ~SSUSB_CTRL_REF_USE_PAD; ++ else ++ data |= SSUSB_CTRL_REF_USE_PAD; ++ ++ writel_relaxed(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ msleep(30); ++ ++ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT; ++ writel_relaxed(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ ++ /* ++ * Fix RX Equalization setting as follows ++ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1 ++ */ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, ++ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~RX_OVRD_IN_HI_RX_EQ_EN; ++ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD; ++ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK; ++ data |= 0x3 << RX_OVRD_IN_HI_RX_EQ_SHIFT; ++ data |= RX_OVRD_IN_HI_RX_EQ_OVRD; ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3->base, ++ SSPHY_CTRL_RX_OVRD_IN_HI(0), data); ++ if (ret) ++ goto err_phy_trans; ++ ++ /* ++ * Set EQ and TX launch amplitudes as follows ++ * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22 ++ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127 ++ * LANE0.TX_OVRD_DRV_LO.EN set to 1. ++ */ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, ++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK; ++ data |= 0x16 << TX_OVRD_DRV_LO_PREEMPH_SHIFT; ++ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK; ++ data |= 0x7f; ++ data |= TX_OVRD_DRV_LO_EN; ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3->base, ++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data); ++ if (ret) ++ goto err_phy_trans; ++ ++ /* ++ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows ++ * TX_FULL_SWING [26:20] amplitude to 127 ++ * TX_DEEMPH_3_5DB [13:8] to 22 ++ * LOS_BIAS [2:0] to 0x5 ++ */ ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1, ++ 0x07f03f07, 0x07f01605); ++ ++err_phy_trans: ++ return ret; ++} ++ ++static int qcom_dwc3_ss_phy_exit(struct qcom_dwc3_usb_phy *phy_dwc3) ++{ ++ /* Sequence to put SSPHY in low power state: ++ * 1. Clear REF_PHY_EN in PHY_CTRL_REG ++ * 2. Clear REF_USE_PAD in PHY_CTRL_REG ++ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention ++ * 4. Disable SSPHY ref clk ++ */ ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_SS_PHY_EN, 0x0); ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_REF_USE_PAD, 0x0); ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ 0x0, SSUSB_CTRL_TEST_POWERDOWN); ++ ++ return 0; ++} ++ ++static int qcom_dwc3_phy_init(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ if (phy_dwc3->phy_init) ++ return phy_dwc3->phy_init(phy_dwc3); ++ ++ return 0; ++} ++ ++static int qcom_dwc3_phy_exit(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ if (phy_dwc3->phy_exit) ++ return qcom_dwc3_ss_phy_exit(phy_dwc3); ++ ++ return 0; ++} ++ ++static struct phy_ops qcom_dwc3_phy_ops = { ++ .init = qcom_dwc3_phy_init, ++ .exit = qcom_dwc3_phy_exit, ++ .power_on = qcom_dwc3_phy_power_on, ++ .power_off = qcom_dwc3_phy_power_off, ++ .owner = THIS_MODULE, ++}; ++ ++static const struct of_device_id qcom_dwc3_phy_table[] = { ++ { .compatible = "qcom,dwc3-hs-usb-phy", }, ++ { .compatible = "qcom,dwc3-ss-usb-phy", }, ++ { /* Sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table); ++ ++static int qcom_dwc3_phy_probe(struct platform_device *pdev) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3; ++ struct phy_provider *phy_provider; ++ struct resource *res; ++ ++ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL); ++ if (!phy_dwc3) ++ return -ENOMEM; ++ ++ platform_set_drvdata(pdev, phy_dwc3); ++ ++ phy_dwc3->dev = &pdev->dev; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res); ++ if (IS_ERR(phy_dwc3->base)) ++ return PTR_ERR(phy_dwc3->base); ++ ++ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref"); ++ if (IS_ERR(phy_dwc3->ref_clk)) { ++ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n"); ++ return PTR_ERR(phy_dwc3->ref_clk); ++ } ++ ++ if (of_device_is_compatible(pdev->dev.of_node, ++ "qcom,dwc3-hs-usb-phy")) { ++ clk_set_rate(phy_dwc3->ref_clk, 60000000); ++ phy_dwc3->phy_init = qcom_dwc3_hs_phy_init; ++ } else if (of_device_is_compatible(pdev->dev.of_node, ++ "qcom,dwc3-ss-usb-phy")) { ++ phy_dwc3->phy_init = qcom_dwc3_ss_phy_init; ++ phy_dwc3->phy_exit = qcom_dwc3_ss_phy_exit; ++ clk_set_rate(phy_dwc3->ref_clk, 125000000); ++ } else { ++ dev_err(phy_dwc3->dev, "Unknown phy\n"); ++ return -EINVAL; ++ } ++ ++ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo"); ++ if (IS_ERR(phy_dwc3->xo_clk)) { ++ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n"); ++ phy_dwc3->xo_clk = NULL; ++ } ++ ++ phy_dwc3->phy = devm_phy_create(phy_dwc3->dev, NULL, &qcom_dwc3_phy_ops, ++ NULL); ++ ++ if (IS_ERR(phy_dwc3->phy)) ++ return PTR_ERR(phy_dwc3->phy); ++ ++ phy_set_drvdata(phy_dwc3->phy, phy_dwc3); ++ ++ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev, ++ of_phy_simple_xlate); ++ ++ if (IS_ERR(phy_provider)) ++ return PTR_ERR(phy_provider); ++ ++ return 0; ++} ++ ++static struct platform_driver qcom_dwc3_phy_driver = { ++ .probe = qcom_dwc3_phy_probe, ++ .driver = { ++ .name = "qcom-dwc3-usb-phy", ++ .owner = THIS_MODULE, ++ .of_match_table = qcom_dwc3_phy_table, ++ }, ++}; ++ ++module_platform_driver(qcom_dwc3_phy_driver); ++ ++MODULE_ALIAS("platform:phy-qcom-dwc3"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Andy Gross "); ++MODULE_AUTHOR("Ivan T. Ivanov "); ++MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver"); diff --git a/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch b/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch new file mode 100644 index 0000000000..f1b41648a3 --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch @@ -0,0 +1,125 @@ +--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +@@ -112,5 +112,29 @@ + sata@29000000 { + status = "ok"; + }; ++ ++ phy@100f8800 { /* USB3 port 1 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@100f8830 { /* USB3 port 1 SS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8800 { /* USB3 port 0 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8830 { /* USB3 port 0 SS phy */ ++ status = "ok"; ++ }; ++ ++ usb30@0 { ++ status = "ok"; ++ }; ++ ++ usb30@1 { ++ status = "ok"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -291,5 +291,90 @@ + #clock-cells = <1>; + #reset-cells = <1>; + }; ++ ++ hs_phy_1: phy@100f8800 { ++ compatible = "qcom,dwc3-hs-usb-phy"; ++ reg = <0x100f8800 0x30>; ++ clocks = <&gcc USB30_1_UTMI_CLK>; ++ clock-names = "ref"; ++ #phy-cells = <0>; ++ ++ status = "disabled"; ++ }; ++ ++ ss_phy_1: phy@100f8830 { ++ compatible = "qcom,dwc3-ss-usb-phy"; ++ reg = <0x100f8830 0x30>; ++ clocks = <&gcc USB30_1_MASTER_CLK>; ++ clock-names = "ref"; ++ #phy-cells = <0>; ++ ++ status = "disabled"; ++ }; ++ ++ hs_phy_0: phy@110f8800 { ++ compatible = "qcom,dwc3-hs-usb-phy"; ++ reg = <0x110f8800 0x30>; ++ clocks = <&gcc USB30_0_UTMI_CLK>; ++ clock-names = "ref"; ++ #phy-cells = <0>; ++ ++ status = "disabled"; ++ }; ++ ++ ss_phy_0: phy@110f8830 { ++ compatible = "qcom,dwc3-ss-usb-phy"; ++ reg = <0x110f8830 0x30>; ++ clocks = <&gcc USB30_0_MASTER_CLK>; ++ clock-names = "ref"; ++ #phy-cells = <0>; ++ ++ status = "disabled"; ++ }; ++ ++ usb3_0: usb30@0 { ++ compatible = "qcom,dwc3"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc USB30_0_MASTER_CLK>; ++ clock-names = "core"; ++ ++ ranges; ++ ++ status = "disabled"; ++ ++ dwc3@11000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x11000000 0xcd00>; ++ interrupts = <0 110 0x4>; ++ phys = <&hs_phy_0>, <&ss_phy_0>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ tx-fifo-resize; ++ dr_mode = "host"; ++ }; ++ }; ++ ++ usb3_1: usb30@1 { ++ compatible = "qcom,dwc3"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc USB30_1_MASTER_CLK>; ++ clock-names = "core"; ++ ++ ranges; ++ ++ status = "disabled"; ++ ++ dwc3@10000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x10000000 0xcd00>; ++ interrupts = <0 205 0x4>; ++ phys = <&hs_phy_1>, <&ss_phy_1>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ tx-fifo-resize; ++ dr_mode = "host"; ++ }; ++ }; ++ + }; + }; diff --git a/target/linux/ipq806x/patches-3.18/102-soc-qcom-gsbi-Add-support-for-ADM-CRCI-muxing.patch b/target/linux/ipq806x/patches-3.18/102-soc-qcom-gsbi-Add-support-for-ADM-CRCI-muxing.patch new file mode 100644 index 0000000000..f37ebeb486 --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/102-soc-qcom-gsbi-Add-support-for-ADM-CRCI-muxing.patch @@ -0,0 +1,258 @@ +diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +index 4ce24d4..186e5f4 100644 +--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt ++++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +@@ -6,7 +6,8 @@ configuration settings. The mode setting will govern the input/output mode of + the 4 GSBI IOs. + + Required properties: +-- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064 ++- compatible: Should contain "qcom,gsbi-v1.0.0" ++- cell-index: Should contain the GSBI index + - reg: Address range for GSBI registers + - clocks: required clock + - clock-names: must contain "iface" entry +@@ -16,6 +17,8 @@ Required properties: + Optional properties: + - qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference + dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. ++- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses ++ dma. + + Required properties if child node exists: + - #address-cells: Must be 1 +@@ -39,6 +42,7 @@ Example for APQ8064: + + gsbi4@16300000 { + compatible = "qcom,gsbi-v1.0.0"; ++ cell-index = <4>; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; +@@ -48,6 +52,8 @@ Example for APQ8064: + qcom,mode = ; + qcom,crci = ; + ++ syscon-tcsr = <&tcsr>; ++ + /* child nodes go under here */ + + i2c_qup4: i2c@16380000 { +@@ -76,3 +82,9 @@ Example for APQ8064: + }; + }; + ++ tcsr: syscon@1a400000 { ++ compatible = "qcom,apq8064-tcsr", "syscon"; ++ reg = <0x1a400000 0x100>; ++ }; ++ ++ +diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig +index 7bd2c94..460b2db 100644 +--- a/drivers/soc/qcom/Kconfig ++++ b/drivers/soc/qcom/Kconfig +@@ -4,6 +4,7 @@ + config QCOM_GSBI + tristate "QCOM General Serial Bus Interface" + depends on ARCH_QCOM ++ select MFD_SYSCON + help + Say y here to enable GSBI support. The GSBI provides control + functions for connecting the underlying serial UART, SPI, and I2C +diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c +index 729425d..09c669e 100644 +--- a/drivers/soc/qcom/qcom_gsbi.c ++++ b/drivers/soc/qcom/qcom_gsbi.c +@@ -18,22 +18,129 @@ + #include + #include + #include ++#include ++#include ++#include + + #define GSBI_CTRL_REG 0x0000 + #define GSBI_PROTOCOL_SHIFT 4 ++#define MAX_GSBI 12 ++ ++#define TCSR_ADM_CRCI_BASE 0x70 ++ ++struct crci_config { ++ u32 num_rows; ++ const u32 (*array)[MAX_GSBI]; ++}; ++ ++static const u32 crci_ipq8064[][MAX_GSBI] = { ++ { ++ 0x000003, 0x00000c, 0x000030, 0x0000c0, ++ 0x000300, 0x000c00, 0x003000, 0x00c000, ++ 0x030000, 0x0c0000, 0x300000, 0xc00000 ++ }, ++ { ++ 0x000003, 0x00000c, 0x000030, 0x0000c0, ++ 0x000300, 0x000c00, 0x003000, 0x00c000, ++ 0x030000, 0x0c0000, 0x300000, 0xc00000 ++ }, ++}; ++ ++static const struct crci_config config_ipq8064 = { ++ .num_rows = ARRAY_SIZE(crci_ipq8064), ++ .array = crci_ipq8064, ++}; ++ ++static const unsigned int crci_apq8064[][MAX_GSBI] = { ++ { ++ 0x001800, 0x006000, 0x000030, 0x0000c0, ++ 0x000300, 0x000400, 0x000000, 0x000000, ++ 0x000000, 0x000000, 0x000000, 0x000000 ++ }, ++ { ++ 0x000000, 0x000000, 0x000000, 0x000000, ++ 0x000000, 0x000020, 0x0000c0, 0x000000, ++ 0x000000, 0x000000, 0x000000, 0x000000 ++ }, ++}; ++ ++static const struct crci_config config_apq8064 = { ++ .num_rows = ARRAY_SIZE(crci_apq8064), ++ .array = crci_apq8064, ++}; ++ ++static const unsigned int crci_msm8960[][MAX_GSBI] = { ++ { ++ 0x000003, 0x00000c, 0x000030, 0x0000c0, ++ 0x000300, 0x000400, 0x000000, 0x000000, ++ 0x000000, 0x000000, 0x000000, 0x000000 ++ }, ++ { ++ 0x000000, 0x000000, 0x000000, 0x000000, ++ 0x000000, 0x000020, 0x0000c0, 0x000300, ++ 0x001800, 0x006000, 0x000000, 0x000000 ++ }, ++}; ++ ++static const struct crci_config config_msm8960 = { ++ .num_rows = ARRAY_SIZE(crci_msm8960), ++ .array = crci_msm8960, ++}; ++ ++static const unsigned int crci_msm8660[][MAX_GSBI] = { ++ { /* ADM 0 - B */ ++ 0x000003, 0x00000c, 0x000030, 0x0000c0, ++ 0x000300, 0x000c00, 0x003000, 0x00c000, ++ 0x030000, 0x0c0000, 0x300000, 0xc00000 ++ }, ++ { /* ADM 0 - B */ ++ 0x000003, 0x00000c, 0x000030, 0x0000c0, ++ 0x000300, 0x000c00, 0x003000, 0x00c000, ++ 0x030000, 0x0c0000, 0x300000, 0xc00000 ++ }, ++ { /* ADM 1 - A */ ++ 0x000003, 0x00000c, 0x000030, 0x0000c0, ++ 0x000300, 0x000c00, 0x003000, 0x00c000, ++ 0x030000, 0x0c0000, 0x300000, 0xc00000 ++ }, ++ { /* ADM 1 - B */ ++ 0x000003, 0x00000c, 0x000030, 0x0000c0, ++ 0x000300, 0x000c00, 0x003000, 0x00c000, ++ 0x030000, 0x0c0000, 0x300000, 0xc00000 ++ }, ++}; ++ ++static const struct crci_config config_msm8660 = { ++ .num_rows = ARRAY_SIZE(crci_msm8660), ++ .array = crci_msm8660, ++}; + + struct gsbi_info { + struct clk *hclk; + u32 mode; + u32 crci; ++ struct regmap *tcsr; ++}; ++ ++static const struct of_device_id tcsr_dt_match[] = { ++ { .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064}, ++ { .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064}, ++ { .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960}, ++ { .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660}, ++ { }, + }; + + static int gsbi_probe(struct platform_device *pdev) + { + struct device_node *node = pdev->dev.of_node; ++ struct device_node *tcsr_node; ++ const struct of_device_id *match; + struct resource *res; + void __iomem *base; + struct gsbi_info *gsbi; ++ int i; ++ u32 mask, gsbi_num; ++ const struct crci_config *config = NULL; + + gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL); + +@@ -45,6 +152,32 @@ static int gsbi_probe(struct platform_device *pdev) + if (IS_ERR(base)) + return PTR_ERR(base); + ++ /* get the tcsr node and setup the config and regmap */ ++ gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr"); ++ ++ if (!IS_ERR(gsbi->tcsr)) { ++ tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0); ++ if (tcsr_node) { ++ match = of_match_node(tcsr_dt_match, tcsr_node); ++ if (match) ++ config = match->data; ++ else ++ dev_warn(&pdev->dev, "no matching TCSR\n"); ++ ++ of_node_put(tcsr_node); ++ } ++ } ++ ++ if (of_property_read_u32(node, "cell-index", &gsbi_num)) { ++ dev_err(&pdev->dev, "missing cell-index\n"); ++ return -EINVAL; ++ } ++ ++ if (gsbi_num < 1 || gsbi_num > MAX_GSBI) { ++ dev_err(&pdev->dev, "invalid cell-index\n"); ++ return -EINVAL; ++ } ++ + if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) { + dev_err(&pdev->dev, "missing mode configuration\n"); + return -EINVAL; +@@ -64,6 +197,25 @@ static int gsbi_probe(struct platform_device *pdev) + writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci, + base + GSBI_CTRL_REG); + ++ /* ++ * modify tcsr to reflect mode and ADM CRCI mux ++ * Each gsbi contains a pair of bits, one for RX and one for TX ++ * SPI mode requires both bits cleared, otherwise they are set ++ */ ++ if (config) { ++ for (i = 0; i < config->num_rows; i++) { ++ mask = config->array[i][gsbi_num - 1]; ++ ++ if (gsbi->mode == GSBI_PROT_SPI) ++ regmap_update_bits(gsbi->tcsr, ++ TCSR_ADM_CRCI_BASE + 4 * i, mask, 0); ++ else ++ regmap_update_bits(gsbi->tcsr, ++ TCSR_ADM_CRCI_BASE + 4 * i, mask, mask); ++ ++ } ++ } ++ + /* make sure the gsbi control write is not reordered */ + wmb(); + +-- +1.9.1 + diff --git a/target/linux/ipq806x/patches-3.18/103-ARM-DT-ipq8064-Add-TCSR-support.patch b/target/linux/ipq806x/patches-3.18/103-ARM-DT-ipq8064-Add-TCSR-support.patch new file mode 100644 index 0000000000..322e1d9237 --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/103-ARM-DT-ipq8064-Add-TCSR-support.patch @@ -0,0 +1,65 @@ +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -132,6 +132,7 @@ + + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; ++ cell-index = <2>; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; +@@ -140,6 +141,8 @@ + ranges; + status = "disabled"; + ++ syscon-tcsr = <&tcsr>; ++ + uart2: serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, +@@ -167,6 +170,7 @@ + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; ++ cell-index = <4>; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; +@@ -175,6 +179,8 @@ + ranges; + status = "disabled"; + ++ syscon-tcsr = <&tcsr>; ++ + uart4: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, +@@ -201,6 +207,7 @@ + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; ++ cell-index = <5>; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; +@@ -209,6 +216,8 @@ + ranges; + status = "disabled"; + ++ syscon-tcsr = <&tcsr>; ++ + uart5: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, +@@ -279,6 +288,11 @@ + status = "disabled"; + }; + ++ tcsr: syscon@1a400000 { ++ compatible = "qcom,tcsr-ipq8064", "syscon"; ++ reg = <0x1a400000 0x100>; ++ }; ++ + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; diff --git a/target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch b/target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch index 89ebe66946..348f24b921 100644 --- a/target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch +++ b/target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch @@ -1,7 +1,7 @@ --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -18,8 +18,15 @@ - bootargs = "console=ttyMSM0,115200 root=/dev/mtdblock12 rootfstype=squashfs,jffs2"; +@@ -22,8 +22,15 @@ + linux,stdout-path = "serial0:115200n8"; }; + aliases { @@ -16,7 +16,7 @@ i2c4_pins: i2c4_pinmux { pins = "gpio12", "gpio13"; function = "gsbi4"; -@@ -34,6 +41,25 @@ +@@ -38,6 +45,25 @@ bias-none; }; }; @@ -42,16 +42,16 @@ }; gsbi@16300000 { -@@ -72,6 +98,7 @@ +@@ -76,6 +102,7 @@ #size-cells = <1>; spi-max-frequency = <50000000>; reg = <0>; + m25p,fast-read; partition@0 { - label = "0:SBL1"; -@@ -148,5 +175,66 @@ - sata@29000000 { + label = "lowlevel_init"; +@@ -136,5 +163,66 @@ + usb30@1 { status = "ok"; }; + @@ -127,11 +127,10 @@ / { model = "Qualcomm IPQ8064"; -@@ -279,5 +280,42 @@ - #clock-cells = <1>; - #reset-cells = <1>; +@@ -390,5 +391,41 @@ + }; }; -+ + + nss-gmac-common { + reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>; + reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";